After 10.4.8 Upgrade: "Login Application crashed"
I upgraded to 10.4.8, but since the upgrade installed I am not able to boot:
I get past the grey screen/spinning wheel successfully to the Login Window with the status bar; then I get a blue screen and in 1s intervals the spinning wheel comes up and disappears.
I started in verbose-mode and the last messages I see is that the Login Window Application" starts and then crashes, a log is written for this app (which I can't access, since I can't logon). Then the Login app tries to start again and crashes again and so forth - I have to shut down the laptop or it keeps going that way.
Its possible that the 10.4.8 upgrade installed (maybe) incompletely; I had to leave the installation process, when I came back the machine was shut down. It actually showed first a blinking white led upon startup, not even the grey screen (which is according the support pages a memory problem indication). I pulled out the memory and put it back in, reset PR, then I got at least to the status described here; I started from the OSX disk and repaired disk - no repairs required and no help either.
Any ideas?
Txs,
Peter
MacBook Pro 15"; PowerMac G5, 2.3GHz DP; Radeon X800 XT; external G-SATA Mac OS X (10.4.4)
I upgraded to 10.4.8, but since the upgrade installed I am not able to boot:
I get past the grey screen/spinning wheel successfully to the Login Window with the status bar; then I get a blue screen and in 1s intervals the spinning wheel comes up and disappears.
I started in verbose-mode and the last messages I see is that the Login Window Application" starts and then crashes, a log is written for this app (which I can't access, since I can't logon). Then the Login app tries to start again and crashes again and so forth - I have to shut down the laptop or it keeps going that way.
Its possible that the 10.4.8 upgrade installed (maybe) incompletely; I had to leave the installation process, when I came back the machine was shut down. It actually showed first a blinking white led upon startup, not even the grey screen (which is according the support pages a memory problem indication). I pulled out the memory and put it back in, reset PR, then I got at least to the status described here; I started from the OSX disk and repaired disk - no repairs required and no help either.
Any ideas?
Txs,
Peter
MacBook Pro 15"; PowerMac G5, 2.3GHz DP; Radeon X800 XT; external G-SATA Mac OS X (10.4.4)
Similar Messages
-
After uninstalling CS4 my Adobe CC applications crash
Help!
After having my CC subscription for almost a year I decided it was finally time to get rid of CS4. So I uninstalled it which went swimmingly. But now...NONE of my other Adobe products work. As soon as you start them up...they crash. They load and then before I can file/open anything they stop working. (Running Win7)
Please don't tell me I need to uninstall EVERYTHING and reload it all. I have all my setting just where I want them and I REALLY don't want to have to reset all of that.
HELP!!!
Thanks
ericMoving this discussion to the Creative Cloud Download & Install forum.
GeekyWhiteGuydotcom what process did you use to remove your installation of Creative Suite 4? Have you tried removing one of the Creative Cloud applications and reinstalling to see if it resolves the difficulties you are experiencing? -
OS_X upgrade makes applications crash
I obeyed an Apple alert and installed 5 software upgrades yesterday. All seemed harmless. Now, however, I can't launch Microsoft Excel; I also had trouble using Firefox, until I reinstalled it. I use Excel for my work. What can I do to make it work again?
Thanks,
dhdavidheim wrote:
PowerBook G4 Mac OS X (10.4.11)
Is this the computer you're referring to? If not, what are the specs on the one you're running...and which updates did you apply?
-mj -
After publication, login or register ParseUser, the application crashes.
I'm using
Unity3D
and
ParseSDK
for the list
of leaders.
Application
crashes
when you
are prompted to verify the
credentials.
It is
wrapped
in a
try {}
catch (Exception).
Locally
works
fine.
The problem manifests itself
only after publication.
Configuration
XAP_Masterpublic void LogIn(string login, string pass)
try
// next line crash
ParseUser.LogInAsync(login.Trim(), pass.Trim()).ContinueWith(t => {
if (t.IsFaulted || t.IsCanceled)
{ UnityPluginForWindowsPhone.WP8func.MessageBoxShow("Failed", "Incorrect login or password.");
status = true;
else
login_status = true;
SaveScore();
catch (Exception ex)
status = true;
The problem
appears only after
publication.
Exception messages
I do not get
the application
crashes
and the end.
Before you download
from the store
I delete
the app and
install.
Before you can
authorize the user,
check
ParseUser!
= null.
Before that, I
tested it
on another device
with the configuration of the
Release_ARM
and it worked
without any
issues.
Now
that
things
have changed
in the store and
Release_ARM
falls
at the opening.
And rightly so, because the
download
is
Master_ARM.
It is not clear
why
this behavior.
Where
should not
work, works, and where
should
not work. -
10.6.4 makes applications crash after upgrade
iTunes, all of Adobe cs4, Quark XPress and several other applications crash without launching after upgrading to 10.6.4. Any suggestions?
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 3 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP11.005D.B00
SMC Version (system): 1.7f10I have exactly the same problem. I upgraded a MacBook Air, iMac 27 inch Core i7 and a MacBook Pro 15 inch core i7.
The MacBook Pro has been modified -- I installed a 500GB Seagate Momentus XT Hybrid drive.
The MacBook Pro with the Momentus XT Hybrid drive has all the same symptoms you report. If I replace the drive with the Seagate Momentus 7200.4 that came with the MacBook Pro, then the 10.6.4 upgrade goes fine. I even erased and repartitioned the the hybrid drive, installed OS X from scratch, then installed the 10.6.4 update. As soon as I install that, applications crash when you try and launch them.
As I thought this was related to the Hybrid drive, I reported it to Seagate -- both at their user forums and by opening a tech support case.
http://forums.seagate.com/t5/Momentus-XT-Momentus-and/Possible-problem-Momentus- XT-and-OS-X-10-6-4/td-p/54217
Seagate tech support responded by suggesting I call Apple as all was well before the 10.6.4 update. Which is how I found this discussion thread. At least it is not just me!
Any resolution yet?
David -
after upgrading to 10.8.2, skype crashes on launch, finder crashes, system preferences crashes and office applications crash. Any ideas?
If you came from 10.6, 10.7/10.8 will no longer run PPC based programs.
First run through this list of fixes, then reinstall all your programs from fresh sources for 10.8 compatability
Set GateKeeper to "Anywhere" in System Preferences > Security
Step by Step to fix your Mac -
Powerbuilder application crashes after upgrade to 12.5.2 (build 5006)
I have already seen few similar posts on this forum for similar issue. However, I feel mine is different from those and could be some basic steps am missing. Thanks in advance for any comments.
We are evaluating the effort and benefits of migrating our PB 10.2.1 (build 9731) application to PB 12.5 Classic. After downloading the trial version from the SAP site, I could migrate the application easily with only a handful of warnings. However, while running the application either from build (EXE) or from IDE, it crashes (windows application failure) frequently. In addition to that, few of our application screens opens as blank screen (doesn’t display anything in the DW attached).
My operating system is Windows 7 (32 bit) Service Pack 1. The application has many calls external DLLs (both windows standard and custom), as samples at the bottom. I believe that the correct (from PB 12.5) DLLs are copied to Powerbuilder home directory (C:\Software\Sybase\PowerBuilder 12.5 & C:\Software\Sybase\Shared\PowerBuilder) and the source code directory in my attempt to ensure that there are no issues with DLLs. However, initially I had installed powerbuilder 12.5 also under the same root as Power builder 10.0, but as I read few posts that DLLs from different version residing in same place can cause issues, uninstalled and installed PB 12.5 on different location.
Our PB application also interact with the .Net modules of the application by communicating through a custom DLL. However, that seems still working and I am able to open the .Net screens from the migrated application.
Below are the main scenarios in which the application crashes and every time I get a DLL error as given below.
1. While running the application from IDE and selecting ‘Exit’ from the main window. This will close any instantiated objects and close the mutex by calling the windows API.
function ulong CreateMutexA(ulong lpMutexAttributes, boolean bInitialOwner, ref string lpName) library "kernel32.dll" alias for "CreateMutexW" function ulong GetLastError() library "kernel32.dll" alias for "GetLastError;Ansi"
function ulong CloseHandle(ulong hMutex) library "kernel32.dll" alias for "CloseHandle;Ansi"
This will result in the below crash.
Faulting application name: PB125.EXE, version: 12.5.2.5006, time stamp: 0x50f93412
Faulting module name: kernel32.dll, version: 6.1.7601.17932, time stamp: 0x503275b9
Exception code: 0xc0000005 Fault offset: 0x0004c372
Faulting process id: 0x2bdc
Faulting application start time: 0x01cf3e72371227c9
Faulting application path: C:\Software\Sybase\PowerBuilder 12.5\PB125.EXE
Faulting module path: C:\Windows\system32\kernel32.dll
Report Id: 8feef8fc-aa65-11e3-8049-f500274aecdc
2. Opening of certain windows results in the below crash. If I try to debug the code and move mouse over the line of code being executed, then also I get the same crash. I don’t do the mouse move then I can proceed with the same line, however it will crash at a later line calling ‘classname’.
Problem Event Name: APPCRASH
Application Name: PB125.EXE
Application Version: 12.5.2.5006
Application Timestamp: 50f93412
Fault Module Name: PBVM125.dll
Fault Module Version: 12.5.2.5006
Fault Module Timestamp: 50f93437
Exception Code: c0000005
Exception Offset: 00175357
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 3081
Additional Information 1: 38ca
Additional Information 2: 38ca6ad0537dbd0555785bd862b8e94f
Additional Information 3: 0cd5
Additional Information 4: 0cd54a5b6672f15bf2ca366539d89c12
3. Few of the application screen opens but doesn’t display the datawindow attached to it.... many calls external DLLs (both windows standard and custom),
You have a very complex application and it is unlikely that you will receive much help in this type of setting. As Chris has already pointed out, previous efforts appear to have been done in a sloppy manner; something indicated by the ANSI qualifiers on API functions that are not needed or relevant. In addition, the PB alias of CreateMutexA for the API function CreateMutexW is also suggestive.
I believe that the correct (from PB 12.5) DLLs are copied to Powerbuilder home directory (C:\Software\Sybase\PowerBuilder 12.5 & C:\Software\Sybase\Shared\PowerBuilder)
You should be very very careful about doing things like this. One should not simply scatter DLLs across directories without very good reasons as it often leads to strange problems. On a machine with the IDE installed, you should allow PB to install everything where it wants them. Copying or moving files is something done as a last resort - it is certainly something that you need to document in case you need to undo it or redo it at a later time.
Lastly, you might reconsider attempting this with the trial version. I don't how "current" the trial version is but I suspect it might be a bit buggier than the most current maintenance build. I'm guessing that you will have to do a bit more than recompiling to get the functionality related to "opening .Net screens" working. It might help to try creating a new application and put in some basic functionality to interact with all of these external processes, screens, dlls, etc since I suspect this is where the bulk of your problems exist. -
Application crashing on windows after upgrading to 4.6.21
Hi,
Recently we have upgraded our application to 4.6.21 from 4.3.21. We use static lib in our application, so I have done some modifications to the workspace like I built 'Win32 Release ASCII x86' with 'Mutlithreaded (/MT)' option instead of 'Multithread DLL (/MD)' option.
When we do testing on our application debug build it is working fine, no problems here, but when we build our application's release version, it is crashing at random places and times. This happening with release as well as debug static db libraries (I am using Win32 ASCII x86 builds).
When I replaced the 4.6.21 static lib with old 4.3.21, the application starts working fine. I have done changes to the code as suggested in one of the 'Berkely DB FAQ' -i.e. to call this method dbenv->set_alloc(dbenv, malloc, realloc, free); before calling DB_ENV->open method. But still my application is crashing and the dumps are showing faults at ntdll methods, I am unable to find where exactly the crash is happening. Has any body seen this happening before?
Regards
ShyamHello,
One suggestion is to take a look at the "Debugging Applications"
section of the Reference Guide at:
http://www.oracle.com/technology/documentation/berkeley-db/db/ref/debug/intro.html
There are quite a few recommendations there on how to debug
an application to isolate root cause of a problem.
Thanks,
Sandra -
i m using window vista32 after itunes upgrade.. itunes crash ..
Problem signature:
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 11.1.4.62
Application Timestamp: 52ddbf7a
Fault Module Name: ntdll.dll
Fault Module Version: 6.0.6000.16386
Fault Module Timestamp: 4549bdc9
Exception Code: c0000005
Exception Offset: 00062086
OS Version: 6.0.6000.2.0.0.768.3
Locale ID: 16393
Additional Information 1: a183
Additional Information 2: 96f68295953afa2675d1551e001cfa2f
Additional Information 3: 5630
Additional Information 4: 5482da5e28e2dc79b1d40bd90d8c9bHello there, jasibrar.
The following Knowledge Base article offers up some great steps for troubleshooting your issue:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
This additional article may prove useful to you as well:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Apple Applications Crash After Time Machine Restore
I recently had to do a full system restore using Time Machine. Ever since the restore completed, most of the Apple applications on my iMac immediately crash when I try to open them. Luckily, Disk Utility is one of the applications that does not crash, so I tried to verify/restore permissions, however, when I try to, I am given this:
Repairing permissions for “Macintosh HD”
Warning: SUID file "Applications/Utilities/Keychain Access.app/Contents/Resources/kcproxy" has been modified and will not be repaired.
Warning: SUID file "System/Library/Printers/IOMs/LPRIOM.plugin/Contents/MacOS/LPRIOMHelper" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
Warning: SUID file "usr/bin/login" has been modified and will not be repaired.
Warning: SUID file "usr/bin/newgrp" has been modified and will not be repaired.
Warning: SUID file "usr/bin/passwd" has been modified and will not be repaired.
Warning: SUID file "usr/lib/sa/sadc" has been modified and will not be repaired.
Warning: SUID file "usr/libexec/chkpasswd" has been modified and will not be repaired.
Warning: SUID file "usr/sbin/scselect" has been modified and will not be repaired.
Warning: SUID file "usr/sbin/traceroute" has been modified and will not be repaired.
Warning: SUID file "usr/sbin/traceroute6" has been modified and will not be repaired.
Permissions differ on "usr/share/derby", should be drwxr-xr-x , they are lrwxr-xr-x .
Repaired "usr/share/derby".
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
Permissions repair complete
However, according to this KB article: http://support.apple.com/kb/TS1448, those are all errors that I can "safely ignore".
This is what the Problem Report says when one of the applications crashes (this one is for iTunes, but they are pretty much all the same):
Process: iTunes [334]
Path: /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier: com.apple.iTunes
Version: ??? (???)
Build Info: iTunes-9022501~2
Code Type: X86 (Native)
Parent Process: launchd [176]
Date/Time: 2009-12-29 01:16:52.530 -0500
OS Version: Mac OS X 10.6.2 (10C540)
Report Version: 6
Interval Since Last Report: 1707 sec
Crashes Since Last Report: 203
Per-App Crashes Since Last Report: 7
Anonymous UUID: 3178C0CD-1A80-48E0-A6EC-2DC6D5EC88CC
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Symbol not found: __ZNK3JSC6JSCell17getTruncatedInt32ERi
Referenced from: /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
Expected in: /System/Library/Frameworks/JavaScriptCore.framework/Versions/A/JavaScriptCore
in /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
Model: iMac9,1, BootROM IM91.008D.B08, 2 processors, Intel Core 2 Duo, 3.06 GHz, 4 GB, SMC 1.45f0
Graphics: NVIDIA GeForce GT 130, NVIDIA GeForce GT 130, PCIe, 512 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.10.91.26)
Bluetooth: Version 2.2.4f3, 2 service, 0 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: AirPort, AirPort, en1
Network Service: Parallels Shared Networking Adapter, Ethernet, en3
Network Service: Parallels Host-Only Networking Adapter, Ethernet, en4
Serial ATA Device: ST31000342ASQ, 931.51 GB
Serial ATA Device: HL-DT-ST DVDRW GA11N
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0x24400000
USB Device: Hub, 0x050d (Belkin Corporation), 0x0307, 0x24300000
USB Device: EPSON Scanner, 0x04b8 (Seiko Epson Corp.), 0x0119, 0x24360000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000
USB Device: Vendor-Specific Device, 0x4542, 0x4149, 0x04100000
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0x06110000
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0x26400000
USB Device: Apple Optical USB Mouse, 0x05ac (Apple Inc.), 0x0304, 0x26430000
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0220, 0x26420000
In addition to not being able to run about 95% of my Apple applications, I can also no longer connect to my Time Capsule Time Machine backups. I am able to SEE the files in the built-in hard drive, but I can not mount the sparsebundle for the backups of any of my computers. I am however able to access them on a different computer. Also, if I try to use System Recovery from my Snow Leopard install disk again, it can't find any backups on my Time Capsule, even though my other computer can view the files with no problem.
Any help with any of these problems would be greatly appreciated.I had a couple of apps start crashing today, with basically the same stuff in the crash reports.
Reinstalling Safari (which also reinstalls the WebKit and JavascriptCore frameworks, which seem to be part of the problem) worked for me.
I found that solution here, after Googling for "Symbol not found: __ZNK3JSC6JSCell17getTruncatedInt32ERi":
http://www.meproxsoft.de/tag/time-machine/
I know very little German (even though I took German in high school-- it might have helped if the teacher actually knew English), but I managed to get "repair permissions" and "reinstall Safari" from all that. -
Applications crashing after 10.8.4 update
I've had multiple applications crashing either immediately on opening or within a few seconds. Apps include Mail, Safari, Chrome, Numbers, Pages and others. This seems to coincide roughly with updating to 10.8.4.
I've restored from Time Machine Backups 3 times, re-installed Mountain Lion (and 10.8.4) from scratch at least once, ran Disk Repair and Repair Permissions from the recovory parition multiple times. After a restore or re-install, the problem appears to go away for couple of days but then rears it's head again. I've ran a full scan of the HD using Drive Genius and it seems fine (hard drive is not original, 750 GB Seagate Momentus XT, the "hybrid" version). I've also downloaded the free version of Norton AV and scans fine as well.
I have and use Drive Genius but I've no way to test hardware such as RAM and such. Just wondering if there's any *free* hardware utilities that can fully test the CPU, RAM, etc. Need to get to the bottom of this....this 13" MacBook Pro is not even a year old. Needing to know if I've got a failing HD or if it goes deeper than that.
TerryPlease read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
SYSADMIN login failing after 12.0.6 upgrade
Hi All,
I had upgrade apps to 12.0.6 from 12.0.4 on HP UX . My SYSADMIN login is failing after this whereas other user logins are fine.
Can someone give any clue on this.
Thanks,
Bharath.Hi,
I had upgrade apps to 12.0.6 from 12.0.4 on HP UX . My SYSADMIN login is failing after this whereas other user logins are fine.
Can someone give any clue on this.What is the error? Any details in Apache log files?
Please verify that the SYSADMIN user is not end-dated. Also, change the password of the SYSADMIN user using FNDCPASS (or from the application) and see if you can login then.
Note: 423274.1 - How To Change The Password For The SYSADMIN User
Note: 437260.1 - How to Change Applications R12 Passwords using Applications Schema Password Change Utility (FNDCPASS)?
Regards,
Hussein -
Desktop computer crashes after sleep mode since upgrade to Snow Leopard
Since I upgraded my power Mac to Snow Leopard in December, I've had nothing but problems, all of which appear to stem from when it comes out of sleep mode. This computer and all applications were rock solid in Leopard! I also have a mac book running identical programs and that IS rock solid on Snow Leopard. I have a 2 x 2.8 GHz Quad Core Intel Xeon processor with 10 GB ram.
I did a complete re-install of SL and all programs as per the Apple instructions.
Basically, the computer crashes after sleep mode. I've tried all the fixes I've read on the net. Here is the report thread from the last crash. Does it mean anything or throw any light on the problem to anyone?
Thanks,
David Wright
Interval Since Last Panic Report: 14 sec
Panics Since Last Report: 1
Anonymous UUID: A8309844-77B4-45E9-AB36-6AF2850B84A0
Tue Jan 19 13:01:16 2010
panic(cpu 4 caller 0x2a7ac2): Kernel trap at 0x8722a3a1, type 14=page fault, registers:
CR0: 0x80010033, CR2: 0x00000000, CR3: 0x00100000, CR4: 0x00000660
EAX: 0x87e7a81c, EBX: 0x87e7a804, ECX: 0x10a2dd00, EDX: 0x00000000
CR2: 0x00000000, EBP: 0x87e7a7a8, ESI: 0x000001f8, EDI: 0xffc21000
EFL: 0x00010202, EIP: 0x8722a3a1, CS: 0x00000008, DS: 0x00000010
Error code: 0x00000000
Backtrace (CPU 4), Frame : Return Address (4 potential args on stack)
0x87e7a598 : 0x21b2bd (0x5cf868 0x87e7a5cc 0x223719 0x0)
0x87e7a5e8 : 0x2a7ac2 (0x591c30 0x8722a3a1 0xe 0x591dfa)
0x87e7a6c8 : 0x29d968 (0x87e7a6e0 0x246 0x87e7a7a8 0x8722a3a1)
0x87e7a6d8 : 0x8722a3a1 (0xe 0x48 0x10 0x290010)
0x87e7a7a8 : 0x8722f604 (0x10a2dd00 0x112e48c4 0x1 0x87e7a7e4)
0x87e7a838 : 0x8722ad60 (0x20d83400 0x10a2dd00 0x87e7a86f 0x0)
0x87e7a888 : 0x87306953 (0x10a2dd00 0x2 0x0 0xffffffff)
0x87e7a8e8 : 0x87789a40 (0x129f0d00 0xff91b80 0x1f8 0x2)
0x87e7a978 : 0x87788845 (0x6f40c004 0x12 0x7 0x2)
0x87e7aa48 : 0x87d92525 (0x159a3e00 0x30006 0x12493004 0x159a3e00)
0x87e7aa68 : 0x87d92413 (0x159a3e00 0x87d9e8a0 0x1 0x0)
0x87e7aa98 : 0x87d97df2 (0x159a3e00 0x12493000 0x5ac000 0x1)
0x87e7aad8 : 0x549661 (0x12493000 0x0 0x0 0x0)
0x87e7ab28 : 0x87d958d8 (0x10675f40 0x87d95df0 0x0 0x0)
0x87e7ab58 : 0x5638fc (0x12493000 0x87e7ab80 0x87e7ab84 0x87e7ab88)
0x87e7abd8 : 0x563c74 (0x11d8534c 0x12493000 0x20e35c90 0x0)
0x87e7ac28 : 0x564554 (0x12493000 0x3 0x87e7ac70 0x0)
0x87e7ad48 : 0x284797 (0x12493000 0x3 0x20e35c90 0x0)
0x87e7bdf8 : 0x21d65f (0x20e35c68 0x20c165a0 0x1fd2a0 0x5b17)
0x87e7be38 : 0x2107f7 (0x20e35c00 0x0 0x11434030 0x20e188f0)
Backtrace continues...
Kernel Extensions in backtrace (with dependencies):
com.RME.driver.FirefaceAudioDriver(2.64)@0x87785000->0x8778dfff
dependency: com.apple.iokit.IOAudioFamily(1.7.2fc1)@0x87d8d000
dependency: com.apple.iokit.IOFireWireFamily(4.1.7)@0x872ed000
com.apple.iokit.IOAudioFamily(1.7.2fc1)@0x87d8d000->0x87da4fff
dependency: com.apple.kext.OSvKernDSPLib(1.3)@0x87cf7000
com.apple.driver.AppleFWOHCI(4.4.0)@0x87221000->0x87246fff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x7dfa3000
dependency: com.apple.iokit.IOFireWireFamily(4.1.7)@0x872ed000
com.apple.iokit.IOFireWireFamily(4.1.7)@0x872ed000->0x8732ffff
BSD process name corresponding to current thread: QTKitServer
Mac OS version:
10C540
Kernel version:
Darwin Kernel Version 10.2.0: Tue Nov 3 10:37:10 PST 2009; root:xnu-1486.2.11~1/RELEASE_I386
System model name: MacPro3,1 (Mac-F42C88C8)
System uptime in nanoseconds: 82873577512931
unloaded kexts:
com.apple.driver.AudioAUUC 1.0 (addr 0x878f1000, size 0x16384) - last unloaded 82669937654216
loaded kexts:
com.RME.driver.FirefaceAudioDriver 2.64 - last loaded 82552224025300
com.paceap.kext.pacesupport.snowleopard 5.7.2
tc.tctechnologies.driver.AlesisFirewire 6300
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleHWSensor 1.9.2d0
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.iokit.CHUDUtils 201
com.apple.driver.AppleUpstreamUserClient 3.1.0
com.apple.iokit.CHUDProf 214
com.apple.kext.ATIFramebuffer 6.0.6
com.apple.driver.AppleIntelPenrynProfile 17
com.apple.ATIRadeonX2000 6.0.6
com.apple.driver.AudioIPCDriver 1.1.2
com.apple.driver.AppleHDA 1.7.9a4
com.apple.driver.AppleIntel8254XEthernet 2.1.1b7
com.apple.driver.AirPortBrcm43xx 421.91.26
com.apple.driver.AppleUSBDisplays 2.2
com.apple.driver.AppleMCEDriver 1.1.9
com.apple.driver.Apple_iSight 4.0.1
com.apple.driver.ACPISMCPlatformPlugin 4.0.1d0
com.apple.driver.AppleLPC 1.4.9
com.apple.iokit.SCSITaskUserClient 2.6.0
com.apple.iokit.IOAHCIBlockStorage 1.6.0
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleUSBHub 3.8.4
com.apple.driver.AppleFWOHCI 4.4.0
com.apple.driver.AppleUSBEHCI 3.7.5
com.apple.driver.AppleAHCIPort 2.0.1
com.apple.driver.AppleIntelPIIXATA 2.5.0
com.apple.driver.AppleEFINVRAM 1.3.0
com.apple.driver.AppleUSBUHCI 3.7.5
com.apple.driver.AppleACPIButtons 1.3
com.apple.driver.AppleRTC 1.3
com.apple.driver.AppleHPET 1.4
com.apple.driver.AppleSMBIOS 1.4
com.apple.driver.AppleACPIEC 1.3
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 96.0.0
com.apple.security.sandbox 0
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagement 96.0.0
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOSurface 73.0
com.apple.iokit.IOBluetoothSerialManager 2.2.4f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.CHUDKernLib 207
com.apple.driver.DspFuncLib 1.7.9a4
com.apple.iokit.IONDRVSupport 2.0
com.apple.kext.ATI2600Controller 6.0.6
com.apple.kext.ATISupport 6.0.6
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IO80211Family 310.6
com.apple.iokit.IONetworkingFamily 1.9
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleHDAController 1.7.9a4
com.apple.iokit.IOGraphicsFamily 2.0
com.apple.iokit.IOHDAFamily 1.7.9a4
com.apple.iokit.IOAudioFamily 1.7.2fc1
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleSMC 3.0.1d2
com.apple.driver.IOPlatformPluginFamily 4.0.1d0
com.apple.driver.CSRUSBBluetoothHCIController 2.2.4f3
com.apple.driver.AppleUSBBluetoothHCIController 2.2.4f3
com.apple.iokit.IOBluetoothFamily 2.2.4f3
com.apple.driver.AppleUSBHIDMouse 1.4.0d7
com.apple.driver.AppleHIDMouse 1.4.0d7
com.apple.driver.AppleUSBHIDKeyboard 1.2.0a3
com.apple.iokit.IOUSBHIDDriver 3.8.4
com.apple.driver.AppleHIDKeyboard 1.2.0a3
com.apple.driver.AppleUSBMergeNub 3.8.5
com.apple.driver.AppleUSBComposite 3.7.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.0
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOATAPIProtocolTransport 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.0
com.apple.iokit.IOUSBUserClient 3.8.5
com.apple.iokit.IOFireWireFamily 4.1.7
com.apple.iokit.IOAHCIFamily 2.0.2
com.apple.iokit.IOATAFamily 2.5.0
com.apple.iokit.IOUSBFamily 3.8.5
com.apple.driver.AppleEFIRuntime 1.3.0
com.apple.iokit.IOHIDFamily 1.6.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.TMSafetyNet 6
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 281
com.apple.iokit.IOStorageFamily 1.6
com.apple.driver.AppleACPIPlatform 1.3
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacPro3,1, BootROM MP31.006C.B05, 8 processors, Quad-Core Intel Xeon, 2.8 GHz, 10 GB, SMC 1.25f4
Graphics: ATI Radeon HD 2600 XT, ATI Radeon HD 2600, PCIe, 256 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.91.26)
Bluetooth: Version 2.2.4f3, 2 service, 1 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en2
PCI Card: ATI Radeon HD 2600, Display, Slot-1
Serial ATA Device: WDC WD10EADS-00P8B0, 931.51 GB
Serial ATA Device: ST3500630AS, 465.76 GB
Serial ATA Device: ST3500630AS, 465.76 GB
Serial ATA Device: WDC WD10EADS-00P8B0, 931.51 GB
Parallel ATA Device: OPTIARC DVD RW AD-7170A
USB Device: Hub, 0x05ac (Apple Inc.), 0x912f, 0xfd500000
USB Device: Apple Cinema HD Display, 0x05ac (Apple Inc.), 0x9221, 0xfd520000
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0608, 0xfd300000
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0608, 0xfd340000
USB Device: ProtectExecuter, 0x0819, 0x0101, 0xfd344000
USB Device: iLok, 0x088e, 0x5036, 0xfd343000
USB Device: MS-20 Controller, 0x0944, 0x0101, 0xfd341000
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfd310000
USB Device: Apple Optical USB Mouse, 0x05ac (Apple Inc.), 0x0304, 0xfd313000
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0221, 0xfd312000
USB Device: USB2.0 Printer (Hi-speed), 0x04b8 (Seiko Epson Corp.), 0x0007, 0xfd200000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8206, 0x5d200000
FireWire Device: Vendor 0xA35 Device 0x101800, 0xA35, Up to 400 Mb/sec
FireWire Device: built-in_hub, Up to 800 Mb/sec
FireWire Device: iSight, Apple Computer, Inc., Up to 200 Mb/sec
FireWire Device: unknown_device, Unknowndavidadmusic wrote:
The problem has been identified as the RME fireface400 audio driver. I've spent some considerable time experimenting to identify the culprit. It's clear that this is what is causing all my problems since Snow Leopard. Whether it's exclusively the drivers fault or partly also due to a conflict with apple SL, I don't know, but I have crash reports if apple want to see them.
From your first post, it appears you are using Fireface audio driver version 2.64. RME released a new Snow Leopard compatible driver (version 2.65) last December. It is available at RME: Downloads. (There is also a firmware updater for the Fireface 400 there, which you might want to check out.)
It isn't at all unusual for a new OS version to require new drivers for third party hardware. References to this can be found all over the web, in "read me" files & other documentation, etc. -- it doesn't just apply to OS X but to Windows & other OS's as well. (One of the biggest problems with Vista was poor third party driver support.) In fact, the X-Lab "Resolving Kernel Panics" article specifically cautions users to make sure all such drivers are current. See section 6.1 of that article for more details.
I don't know if you missed all this somehow, but if you haven't already downloaded & installed the new RME driver (& possibly the firmware update as well), then do so now. While you are at it, check for other similar updates for any other third party hardware devices you use, using the info in section 6.1 of the X-Lab article as a guide.
Hopefully, this will resolve your issue, which (as already mentioned) is kernel panics, not crashes. If you still have problems, post more about them, being mindful of the difference between application crashes & kernel panics. Because they are fundamentally different, they have different cures, so we will need to know which type they are to offer effective help. -
Application crashes after closing LabVIEW instance with Scilab 5.2.2
I use LV 8.21 with the LabVIEW to Scilab Gateway software Version 1.1 (new version from NI homepage)
I have Scilab Version 5.2.2 installed. We will do some calculation with the LabVIEW Scilab script node.
Mainly use a call "exec (functionA,-1) Scilab script node. The functionA is a scriptfile outside of the application.
So far everything is working fine, I can build a LabVIEW application with the application builder.
If I run the application the calculation inside the Scilab script node are proceeding; I can call
it many times in a loop without no problem.
But if I close the instance (the VI with the Scilab script node inside) the application crashes.
The same problem I have in the LabVIEW development environment
Is there a way to "unload" Scilab before I close the VI without a crash. After the Scilab
calculation I have to close the calling VI and call some other VIs for further calculation
(but this VIs have no Scilab call)
I tried with the "exit" and "quit" command in Scilab script node, no success
any suggestion
Attachments:
scilab.GIF 5 KBHello
thanks for the advice. I tried with version 5.1.1 ... but no success!
So I went straight back to version 4.1.1 and it works fine, of course I had to remove the comments from the script node
So fare I can work with this version.
So what are the time schedule to fix this problem? It is a very useful tool an I would like to use the latest version of scilab and not an old version.
Thank you -
Application crashes after sometime using UIGetScreenImage()
Hi,
I've the following code to take the screenshots in iPhone:-
*+ (UIImage )imageWithScreenContents
* CGImageRef cgScreen = UIGetScreenImage();*
* if (cgScreen) {*
*UIImage *result = [UIImage imageWithCGImage:cgScreen];*
* CGImageRelease(cgScreen);*
*return result;*
*return nil;*
I'm calling the above code in a timer of 1/1.0 seconds as:
*[array addObject:[UIImage imageWithScreenContents]];*
where imagewithScreenContents is a function. But after some seconds i.e after adding 90 frames application crashes. I'm unable to understand the problem.
Can somebody help me in solving the problem ?
Thanks in Advance.Hi,
first please use the structure(without the minus sign in the parenthesis) below in order to
properly post code:
{-code}
Place code here!
{-code}
Second, I am no iPhone developer but still I think you need to be more careful what and when you
are releasing(especially with a timer). I myself have an application that uses multiple timers, so may
be this will be helpful(without seeng your actual error message can't tell for sure). My first clue would be to ask you how you create your array object and what do you do with it. The second one,
I am not sure if this is needed but can't you define a property called 'screenShotImage' or so and
give it value in your 'imageWithScreenContents' function? What I am trying to say is:
-(UIImage*) screenShotImage
return screenShotImage;
-(void) setScreenShotImage: (UIImage*) input
[screenShotImage release];
screenShotImage = [input retain];
and then in your imageWithScreenContents method:
[self setScreenShotImage: [UIImage imageWithCGImage: cgScreen]];
CGImageRelease(cgScreen);
I am pretty sure that you are not handling your memory allocation/deallocation properly, do a
little research on the topic, I am also pretty sure that you have to be extra careful with memory
when implementing an iPhone app. Hope some of this helps.
Regards,
-artOf...
Maybe you are looking for
-
I'd like a "goto" like in my method
here's my code: bl = true; do { // apresentar o problema try { System.out.println(p1 + escolhido.getOperacao() + p2 + " ?"); catch (NullPointerException npe) {
-
Adapter engine calling IE failed
HI Friends, In the adapter engine mesages are in 'to be delivered' state,audit log giving error as like url not correct. Recently some changes are done at the url level in the abap stack so messages at the sender adapter level are in error(to be deli
-
Commitment Item in Project System
Hi, How could i create commitment item in project system without creating a PO for a project. Please advice.
-
Problem to connect database from Developer 6i
I have downloaded Developer 6i from oracle.com before that, I have already downloaded 9i database default_home directory is c:\orant. while i was installing develper 6i it was installed with forms_home, c:\orant\forms. I was using the forms builder t
-
BBP_EXTLOCALPO_BADI - Documentation and LOF (Vendor List) in SRM
Hello experts, Someone would have details of how to use the badi BBP_EXTLOCALPO_BADI? Currently I am with the extended classic scenario and need to activate the classical simultaneously. Does anyone have any information on how the LOF (Vendor List) i