After 10.6.2 update Entourage Web Services Edition cannot connect

After I updated 10.6.2 patch, Entourage 2008 Web Services Edition cannot connect to the Exchange server anymore.
I removed the office 2008 and re-installed with all the available patches. Standard version of Entourage is able to connect and synchronize however Web Services Edition is not able to connect. Web Services Edition is using Exchange Web Services as primary connection protocol to the Exchange Server.
Nothing has changed on the server side and Apple Mail can connect to the exchange server. It seems to be related with 10.6.2 update. Any idea what might cause the problem and how to fix it?

I managed to get the connection log from a working system and compared it to mine. During the Autodiscovery part the only difference I found was related with timezone. Below is the exact text from the log files:
*Successful connection:* <t:TimeZoneContext><t:TimeZoneDefinition Id="Georgian Standard Time"/></t:TimeZoneContext></
*failed connection:* <t:TimeZoneContext><t:TimeZoneDefinition Id="(null)"/></t:TimeZoneContext></
After figuring out this detail I checked the computer timezone again.
Both computer and Entourage was set to GMT+4 but the cities were different. Computer was set to “GMT+4 Dubai” and Entourage was “GMT+4 Abu Dhabi, Muscat”
Even though time zones were the same, Dubai is not defined as a timezone city in Entourage. I changed the computer timezone to “GMT+4 Muscat” and the connection established.
This is the most stupid error I ever seen...

Similar Messages

Blackberry Protect web service does NOT connect remote to my phone

Can't find any similar problems on the net which is worrying...
Bold 9700, regularly registered to BIS
I installed Balckberry protect a few times hoping it would solve the problem
Essentially It all works but when I connect via the web service, I cannot connect to my phone(I am emulating a lost phone scenario) I tried to block the phone remotely, play a sound, change the screen message...NOTHING works
The backups are done regularly
Can anyone help?

I'd contact your service provider if the rebooting and resetting network settings did not work. A locked phone (locked to a specific network) will not allow you to connect to another provider's network. It is the phone itself that makes calls (which is why you can still make an emergency call from a phone with no sim card in it) and receives sms. The sim acts as an "enabler" so to speak.

Is it possible to call web services in adobe connect application?

I have facing one security issue in adobe connect
Error Description is "Security error accessing url
Unable to load WSDL. If currently online, please verify the URI and/or format of the WSDL (http://xxxxxx/WebService.asmx?wsdl)"
Is it possible to call web services in adobe connect application?
Thanks and regards
Selvan

OK, so it's a plain Flex security issue, not related to the Connect application, probably due to crossdomain misconfiguration.
Please read http://www.adobe.com/devnet/articles/crossdomain_policy_file_spec.html and http://www.adobe.com/devnet/flashplayer/articles/fplayer9_security.html
You may want to ask for help in the proper Flex forum. Also, download Tour de Flex and look at the example under "Flex Data Access3 -> "WebService".
Try also to look at this thread http://forums.adobe.com/thread/223999

After installing lion and updating to pages 4.1 cannot view my document content after I open the document. Shows how many pages I have and how many words in word count, but no words...

after installing lion and updating to pages 4.1 cannot view my document content after I open the document. Shows how many pages I have and how many words in word count, but no words...

Same problem. Tried reinstalling Pages. Didn't help. The behavior is like I am typing with a white font on a white background, but I am not.

Enabling Usage Rights for Web Service and Database connectivity

We are looking for code that allows us to enable web service and database connectivity rights into a form. We are using LiveCycle Forms 7.2 to render the XDP and merge data. Because we are merging data into the form, it has to be reader enabled through the code everytime it is presented to the user in our application.
usageRights[0] = com.adobe.document.pdf.DOCUMENT_SAVE.value;
usageRights[1] = com.adobe.document.pdf.FORM_FILL_IN.value;
usageRights[2] = com.adobe.document.pdf.FORM_EXPORT.value;
usageRights[3] = com.adobe.document.pdf.FORM_IMPORT.value;
usageRights[4] = com.adobe.document.pdf.FORM_ONLINE.value;
Anyone's help would be greatly appreciated

This topic was cross posted. See responses here:
http://forums.adobe.com/message/2111421#2111421

The Web Service Tester cannot be invoked, because the WSDL document of the

Hi,
I'm new to using webservice. I created a web service and right mouse clicked on the serviceImpl.java and selectd 'Test Web Service'.
I got an error
"The Web Service Tester cannot be invoked, because the WSDL document of the selected service cannot be read."
Could you please help?
Thanks,
Charunee

I found that this is a bug in Jdev and it is fixed by
BUG 9153288 - D08B02C: WEBSERVICES TEST PAGE GIVES ERROR AND IS NOT DEPLOYED
Thanks,
Charunee

Reporting Services Server cannot connect to the DPM database. ( dpm 2010 )

Reporting Services Server cannot connect to the DPM database.
To repair the configuration, follow steps for repairing DPM from DPM Setup Help.
ID: 3001
i can not try the Recommended action from error codes catalog because i did not found Change reporting
password

Hi,
We have had several customers report this after installing DPM 2012 R2.
To get past the below error while scheduling reports to be mailed.
Reporting Services Server cannot connect to the DPM database.
To repair the configuration, follow steps for repairing DPM from DPM Setup Help.
ID: 3001
Perform the following steps as necessary:
1. Created a new local group called "DPMDBReaders$<DPMServerName>"
2. Created a new user called, "DPMR$<DPMServerName>" and added this user to DPMDBReader group that we created on step 1.
3. Open SQL management studio and add the DPMDBReaders$<DPMServerName group to Logins under Security in SQL Management Studio.
4. Modify the properties and under General – change the default database to the current DPMDB name.
5. Under User Mapping – select the current DPMDB name and check the db_datareader checkbox.
6. In SQL Management Studio, navigate to the Databases > DPMDB > Security > Users > and select the DPMDBReaders$<DPMServerName>" group.
Right-click the DPMDBReaders$<DPMServerName>" group and select properties. Under the
Securables section, click on Search. On the add objects dialog, click OK.
On the Select Objects dialog, click the Objects type, then check the
stored procedure checkbox. Browse and add the following two stored procedures
“Prc_MOM_Heartbeat_Get” and “prc_MOM_ProductionServer_Get”.    Grant the Execute permission for both of the stored procedures added.
7. In SQL Reporting Services Configuration manager, under Report Manager URL - click on the link to open the portal (http://localhost/Reports)
      i. Click on the DPMReoprts_GUID to open the DPM reports.
      ii. Click on the DPMReporterDataSource
      iii. On the poperties page, enabled "Credentials stored securely in the report server" on DPMReporterDataSource configuration page and added “DPMR$<DPMServerName>” user account that we created in step 2.
      iv. tick "Use as Windows credentials when connecting to the data source."
      v.   Click ‘Test connection’ on the same page to verify whether it can connect successfully.
8. In SQL Reporting configuration manager - change the Service Account to use build-in account: Network Service
9. Reboot the DPM Server.
10. You should then be able to schedule e-mailed reports.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.

DPM 2012 R2 Rollup 1 x64.. cant save scheduled report.. gives error: "Reporting services server cannot connect to the dpm database"

The error also has "to repair the configuration, follow steps for repairing dpm from DPM setup help ID: 3001
I tried the solution outlined here:
http://social.technet.microsoft.com/Forums/en-US/8be919ee-f358-47a4-9cc3-d23eb05d3f18/system-center-2012-r2-dpm-smtp-issue-reporting-services-server-cannot-connect-to-the-dpm?forum=dataprotectionmanager
and also the graphical depiction here: http://www.ms4u.info/2014/01/reporting-services-server-cannot.html
I tried these steps, but everytime i try to change it, it tells me:
"The permissions granted to user 'domain\userid' are insufficient for performing this action rsaccessdenied..
Nothing seems to work..
I thought if i went into sql management studio and made sure my userid had admin rights to the db it would work.. but i cant change it there (via integrated security).. i believe i need to login as SA, but i dont recall the password for SA, though it appears
i can change the SA password from within sql management studio.. i'm unsure if doing so will break DPM though or is even needed to fix the reporting integration issue..
Any thoughts on this?
Thanks
Tech, the Universe, Everything: http://tech-stew.com

Using:
data source="servername\MSDPM2012";persist security info=False;initial catalog=DPMDB
I used the domain sqlservice account and test connection was ok.
However.. accessing reports still crashes in the MMC
Tech, the Universe, Everything: http://tech-stew.com
When i recreated the db.. i called it Reporting2 or similiar..
Then the reports folder i created called "Reports Folder"
Then datasource name "reports datasource"
The issue here is that the DPM reports in the reporting web interface are gone, since this is a new DB.. how do i redeploy them
Tech, the Universe, Everything: http://tech-stew.com
i went back into the sql reporting services area.. hit change db.. chose the original .. then back to the url.. went to the OLD reporting services folder and datasource.. added the connect string and now reporting area works.. so does scheduling..
Problem now solved
Tech, the Universe, Everything: http://tech-stew.com
Oops spoke too soon.. the first time i set it to do "status" as a schedule.. it seemed to work (clicked ok, no error).. went back and added an email notification..
Now i'm getting.. "an error occurred causing the reporting job to fail" "system files may be corrupt".
Seems to only occur if i try to add the email address portion
Tech, the Universe, Everything: http://tech-stew.com
rechecked the datasource.. i think there was an error in the connect string.. now everything seems to be working.. email notifications and all.
Tech, the Universe, Everything: http://tech-stew.com

I am trying to download a free app but after entering my correct password I get the message "Cannot connect to iTunes Store". The only option then is to hit OK, which achieves nothing. How can I connect?

I am trying to download a free app to my iPhone 4, but after entering my correct password I get the message "Cannot connect to iTunes Store". The only option is to hit OK which achieves nothing. How can I connect to the store?

Might be help for you here > Can't connect to the iTunes Store

Cannot connect to olap service. Cannot connect to Essbase Server. Error:Essbase Error(1051293): Login fails due to invalid login credentials

Hello All,
I am getting following error, when trying to expand essbase from calculation manager, "Cannot connect to olap service. Cannot connect to Essbase Server. Error:Essbase Error(1051293): Login fails due to invalid login credentials",
I am using EPM 11.1.2.1
Thanks
Yash

If you have moved the server to a new data center and an issue has started occurring then it could point to the change.
Are you able to log into essbase directly with Maxl using the same account?
If you run a registry report do you see any of the configuration with IPs instead of DNS/hostname
Cheers
John
http://john-goodwin.blogspot.com/

I have updated to iOS8. Now cannot connect to BT speaker I have been using for months. BT discovers it but will not pair. Help please

I have updated to iOS8. Now cannot connect to BT speaker that I have been using for months. BT discovers it but will not pair. I have tried switching both off & on but nothing helps.

I am sure the BT speaker not the problem because it works fine with iOS8 on my iPad!
... And no I am not trying to connect both at once. To be sure I have switched the iPad off completely and switched the speaker off & on but still with the same failure to pair. The iPhone sees the speaker but then gives me the pairing unsuccessful message when asked to connect.

Oracle update with Web Service

I have a windows service running on IIS5 on a 2000 box. It
runs every two hours and pulls information from an Oracle
9i table. I package this information into an xml Docmument
and use the httpwebrequest to send it to web service
running on another machine. When the windows service
receives a successful send to the other machine it updates
the oracle table. On the second server meanwhile the web
service there takes the xml that was send and updates a
SQL7 table. It records a successfull or failed update to
the sql table and packages up the results(xml) and sends
them back to a web service running on the first machine.
This web service then takes the xml it recieves and
Updates the original Oracle table with a success or
failure. In my code I call the executenonquery and find
that 1 row was updated in the oracle table. I close the
connection and open a new one and pull out the field I
updated and email that result to myself. It shows that the
field was updated. However when I look in the Oracle table
through TOAD, or Quest Central the Table is not updated to
what it should be. The first update from the windows
service worked but the second update from the web service
does not work.
I have used the oledb provider that comes with .net, the microsoft .net provider for Oralce and ODP.NET from Oracle. I have
written the code in the web service to run as a
transaction and as just a straight sql statement. I have
written it to call a stored procedure in Oracle that will
update the table with a commit in the stored procedure. In
all cases my code tells me that the update was successful.
A trace running on Oracle shows my code executing with no
errors. Yet in all cases the Oracle table does not update.
I have since written a second windows service that runs 15
minutes after the first one runs and pulls values from a
temp table and does the updates this way THIS WORKS.
I just want to know why the web service could not update
the table directly. I think that this might be a bug in
either the .net environment or in Oracle. I'm sure both
Microsoft and Oracle will blame each others products but
it would be nice to know why this is happening.
If any other developers run into this problem be warned I
worked on it for three weeks and wrote my code 10 ways to
Sunday and it would not work.
Happy coding people.

Let me understand this correctly. You are trying to update a column value twice. First update goes through but second does not and you don't get any error for the second update. If this is the scenario, it is not supposed to work.
Here is the reason. A column can be updated using Dataset only if the original column value in the database has not been changed. This is to avoid the dirty writes. Since the original value has not been changed for the first update, the column value is actually updated in the database. However, for the second update, since the original column value was changed by the first update, second update does not update the column value.

After upgrade from FB4Beta to FB4, web services no longer returning the same data types.

I just upgraded from FB4 beta to the FB4 release. I'm still running the Flex 3.5 SDK and amnow unable to use a lot of my web services. In the previous FB4 beta, I could generate the proxy classes from the WSDL and would get a ResultEvent that containted either my complex data type or an ArrayCollection of those complex data types.
After I deleted and regenerated the services under the FB4 release, I get a ProxyObject or an ArrayCollection of ProxyObjects. No matter what I try I cannot map those ProxyObjects to my complex data type and it's driving me nuts! The oddest thing is that it didn't break all of my services, just some of them.
I've tried several methods of mapping the ProxyObject to my custom data type but I get a null result every time and no errors.
private function getContactsResult_handleResult(event:ResultEvent):void
    this._contactsList.removeAll();
    if (event.result is ArrayCollection)
        for each (var contact:ContactType in event.result)
            _contactsList.addItem(contact);
    if (event.result is ContactType)
        _contactsList.addItem(event.result as ContactType);
Any suggestions?

It looks like this was a combination of the upgrade,
increasing use of ASP files and not having seperate application
pools in IIS.
We've just starting edding aspx apps, previously we only had
one asp app so we only used the default app;icaton pool in iis.
With the errors in the virtual directory started, we deleted and
remade the VD with it's only application pool. That appears to have
resolved the issues. The only concern I have is one of the VD did
have it's own applicaton pool and still had the very slow response
after the upgrade. But I'll see how this solution works for the
future.
The decesion was made to only have cf8 installed since that
worked well on our testing server, so we did intend to overwrite
the CFIDE folder.
Thanks for checking this out and for your time on this.
At this point I consider this closed. If something else comes
up I'll start a new thread on it.

Updating the web-services.xml for WS-Security

If I wanted to change my webservice from encryption of both the request and response to just encryption of the request how do I manually change the web-services.xml file ??? Do I have to un-archive the ear and re-archive the ear everytime I want to make security changes to the web-services.xml file ?

It works. Thanks,
Ioana
"Neal Yin" <[email protected]> wrote:
The error means your EJB is not deployed.
Adding a EJB module to your application.xml file of the ear should fixe
it.
<application>
<display-name />
<module>
<web>
<web-uri>dox_sdi.war</web-uri>
</web>
</module>
<module>
<ejb>DocumentService.jar</ejb>
</module>
</application>
"Ioana Meissner" <[email protected]> wrote in message
news:3cf640cc$[email protected]..
I have used the following example for my own web service with EJBcomponent and SOAP
Message Handler Chain:
http://e-docs.bea.com/wls/docs70/webServices/dd.html#1058208
I have a deployment error:
javax.naming.NameNotFoundException: Unable to resolve'app/ejb/DocumentService.j
ar#DocumentService/home' Resolved: 'app/ejb'Unresolved:'DocumentService.jar#Doc
umentService' ; remaining name 'DocumentService.jar#DocumentService/home'
In attachement is the ear file.
Is there a problem in web-services.xml?
Thanks

Cannot enable ePrint Web Services - get internet connection error for HP LaserJet 1102W

I have a HP laptop running Windows 7 Professional 64 bit. We just changed over to Comcast internet service from AT&T where my HP LaserJet 1102W was set up for ePrint. After several hours, I was finally able to add the 1102W printer to the Comcast network, access the Embedded Web Server tool and print wirelessly but I cannot set up ePrint. I have deleted the printer but cannot get it to connect to Web Services. I keep on getting: Connection Error. Check Internet Connection but again, I can print wirelessly successfully to the printer but would like to be able to set it back up for ePrint. My Comcast router is an Arris TG862.
I have updated the firmware and used the HP Print and Scan Doctor tool but still am not able to get the ePrint Web Services to connect. Here is the information from the Networking page of the EWS:
IPv4 Configuration
Warning: A change in the IP Address will result in loss of connectivity to the browser.
IP Configured By: DHCP
Host Name: NPIC968F8
Domain Name: hsd1.tn.comcast.net.
IP Address Configuration
X Automatic IP Manual IP
X DHCP
BootP
X AutoIP
Manual IP Address:10.0.0.89
IP Subnet Mask: 255.255.255.0
Manual Default Gateway: 10.0.0.0
DNS Address Configuration
Preferred DNS Address: 75.75.75.75
Alternate DNS Address: 75.75.76.76
WINS Address Configuration
X Automatic WINS Server
Manual WINS Server
Manual Preferred WINS Server: 0.0.0.0
Here is my ipconfig information:
Wireless LAN adapter Wireless Network Connection:
   Connection-specific DNS Suffix . : hsd1.tn.comcast.net.
   Description . . . . . . . . . . . : Intel(R) Centrino(R) Wireless-N 1000
   Physical Address. . . . . . . . . : 8C-A9-82-A3-F9-5E
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::c57:eb2b:5144:2ea5%13(Preferred)
   IPv4 Address. . . . . . . . . . . : 10.0.0.3(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Friday, March 29, 2013 1:24:52 PM
   Lease Expires . . . . . . . . . . : Saturday, April 06, 2013 11:09:24 AM
   Default Gateway . . . . . . . . . : 10.0.0.1
   DHCP Server . . . . . . . . . . . : 10.0.0.1
   DHCPv6 IAID . . . . . . . . . . . : 378317186
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-15-CE-4E-8C-10-1F-74-11-22-71
   DNS Servers . . . . . . . . . . . : 75.75.75.75
                                       75.75.76.76
   NetBIOS over Tcpip. . . . . . . . : Enabled
There appears to be a known issue with the Arris TG862 router and supposedly a new firmware is to be released soon but just checking to see if anyone has been able to resolve this issue.
Thank you!

Hi Surf1981,
I understand that you're not able to enable web services on your printer. I would try steps listed below.
1. Open an internet browser type printer's IP address.
2. Should bring you to the printer's status page.
3. Select networking tab at the top.
4. Left hand side select Network Identification.
5. Under DNS address Configuration select Manual DNS Server.
6. For Preferred enter 8.8.8.8
7. For Alternate enter 8.8.4.4
8. Select apply. You might get a warning saying this could interrupt connection that's fine.
9. Turn printer off for about 30 seconds then try again.
**If you find this helpful or want to say thanks make sure to click the white star under my name to give me Kudos. **

After 10.6.2 update Entourage Web Services Edition cannot connect

Similar Messages

Maybe you are looking for