After 10.6.7 update cannot run any programs!

Everything was fine yesterday on 10.6.6 Updated this morning to 10.6.7 via Software Update. All went fine. Restarted and now cannot run Finder, Safari, iTunes etc etc ALL crash with unexpected error. Repaired disk in Safe mode but no change. Any ideas?

Because I've had strange problems with past system update downloads, I now always get my system updates from http://support.apple.com/downloads/
I always use the Update Combo version. It installs a fresh set of all previous updates as well as the new one. This gives you a fresh beginning with system 10.6.x. Since I adopted that practice, I've had no more issues with updates.

Similar Messages

  • All applications in iWork fail to open after installing latest apple update. iMac running 10.6.8 Snow Leopard. Have tried reinstalling from iWork disc but no improvement. Help!

    All applications in iWork fail to open after installing latest apple update. iMac running 10.6.8 Snow Leopard. Have tried reinstalling from iWork disc but no improvement. Help!
    Error report as follows
    Process:         Pages [208]
    Path:            /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
    Identifier:      com.apple.iWork.Pages
    Version:         4.1 (923)
    Build Info:      Pages-9230000~1
    Code Type:       X86 (Native)
    Parent Process:  launchd [93]
    Date/Time:       2012-08-22 12:33:15.909 +0100
    OS Version:      Mac OS X 10.6.8 (10K549)
    Report Version:  6
    Interval Since Last Report:          102101 sec
    Crashes Since Last Report:           11
    Per-App Interval Since Last Report:  2217715 sec
    Per-App Crashes Since Last Report:   4
    Anonymous UUID:                      1FA704D3-D5EF-4CE3-9813-42E4559157DC
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread:  0
    Dyld Error Message:
      Symbol not found: _SFAAutosaveUserActivityException
      Referenced from: /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
      Expected in: /Library/Application Support/iWork '09/Frameworks/SFArchiving.framework/Versions/A/SFArchiving

    I'm having this issue as well only with a little different twist I guess. I'm transferring the iWorks applications from my Macbook Pro 3,1 with Lion to a new MBP 10,1 running Mountain Lion. I transferred the apps over using DropCopy since the older MBP doesn't have AirPlay. Applications show up but crash upon opening. This is the first install so there are no previous plist, versions or such to delete. All three crashed upon opening every time until I just had to have Keynote and purchased again - although Apple agreed to refund that purchase since my previous version quit working. Any ideas since I don't have any previous plist/versions to delete? Thanks in adavnce for any help you can offer.
    Process:         Pages [13521]
    Path:            /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
    Identifier:      com.apple.iWork.Pages
    Version:         4.3 (1048)
    Build Info:      Pages-10480000~1
    Code Type:       X86 (Native)
    Parent Process:  launchd [153]
    User ID:         501
    Date/Time:       2013-03-11 14:57:02.175 -0400
    OS Version:      Mac OS X 10.8.2 (12C3103)
    Report Version:  10
    Crashed Thread:  0
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    dyld: launch, loading dependent libraries
    Dyld Error Message:
      Library not loaded: @rpath/SFCompatibility.framework/Versions/A/SFCompatibility
      Referenced from: /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
      Reason: image not found
    Binary Images:
        0x1000 -   0x354fe3  com.apple.iWork.Pages (4.3 - 1048) <3F2BE397-E81E-3355-C0DE-8B0F014E897B> /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
      0x3ec000 -   0x46bff7  com.apple.iLifeMediaBrowser (2.7.2 - 546) <24A0A118-874B-3C7C-B50C-C80BED03A15F> /System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/iLifeM ediaBrowser
    0x8fe3e000 - 0x8fe70e57  dyld (210.2.3) <23DBDBB1-1D21-342C-AC2A-0E55F27E6A1F> /usr/lib/dyld

  • After 10.7.2.update cannot see SD card reader in usb drive. Used to appear on desktop and start iPhoto but now nothing happens. It is recognised by system profiler (usb hub), but cannot find it anywhere.

    After 10.7.2. update cannot see SD card reader in usb drive. Used to appear on desktop and start iPhoto but now nothing happens. It is recognised by system profiler (usb hub), but cannot find it anywhere. Any ideas?

    Zap the PRAM and Reset the SMC, then try again.

  • I uninstalled Adobe Air and Adobe Reader and now I cannot reinstall them on the Adobe web site. I go thru the steps on Adobe site and never get a popup to RUN any programs.

    I uninstalled Adobe Air and Adobe Reader and now I cannot reinstall them on the Adobe web site. I go thru the steps on Adobe site and never get a popup to RUN any programs.

    Then there is something seriously wrong with either your
    browser
    Windows
    Internet connection
    I have just downloaded that installer (on Windows 7, using Pale Moon), and the download completed within less than 10 seconds.  And I am some 10,000km away from the Adobe download servers.
    Can you try a different browser?
    Can you download anything to your computer, e.g. from Microsoft?

  • Somehow, all of my exe files are tagged as Acrobat files - I cannot run any of the software on my computer - when I start the computer none of the startup programs run because they all try to open in acrobat.

    Somehow, all of my exe files are tagged as Acrobat files - I cannot run any of the software on my computer - when I start the computer none of the startup programs run because they all try to open in acrobat.

    See if anything in here helps: https://helpx.adobe.com/acrobat/kb/application-file-icons-change-acrobat.html

  • I can not perform software updates or download any programs. They appear in the download box as images that are not recognized. How can I fix this?

    I can not perform software updates or download any programs. They appear in the download box as images that are "not recognized". I thought maybe my antivirus software was setting up a firewall, but I have disabled it, so that's not the case. Any suggestions as to  how I can fix this?

    If the downloads are gone, it's possible that Windows is removing the downloads based on security policies set in IE. I realize that sounds strange, but it's related to Firefox's feature of submitting downloads to your virus scanner and marking them as having come from the internet.
    To test this theory, you could try disabling the scan feature. I assume you have good "real time" antivirus protection which checks every file saved to your hard drive. (If not, you really should get that, and you can use Microsoft's free [http://windows.microsoft.com/en-US/windows/products/security-essentials Microsoft Security Essentials] for now until you have time to review all the available choices.)
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the filter box, type or paste '''scan''' and pause while the list is filtered
    (3) Double-click '''browser.download.manager.scanWhenDone''' to toggle its value.
    Firefox now should ignore Windows' download security. Does it change how Windows handles the file?

  • Installed ios8 now i cannot open any programs

    downloaded ios8 on my ipad now I cannot open any programs not even email the touch screen does not respond therefore unable to scroll to reset button in general settings.
    HELP anyone please

    Hi, slonky.  
    Thank you for visiting Apple Support Communities.  
    Here is an article that I recommend going through when experiencing this issue.  
    iOS: Not responding
    http://support.apple.com/kb/TS3281
    Cheers, 
    Jason H.  

  • MacBook currently running OS 10.6.8 will start up but will not run any programs, including Finder, let alone Terminal. Any suggestions? Am I totally screwed?

    I start up, that takes like 15 minutes. Desktop photo appears. Dock, Finder, and menu bar appear briefly before disappearing. Cannot open any programs, because clicking on anything is impossible. So... am I screwed? I did not back up for a few weeks. I don't want to lose all my work. Really distraught, really poor (can't afford another laptop), really confused.

    Shut down your machine.
    Turn on machine
    hold command s until you get a black screen
    type:
    fsck -yf
    if you see any:
    disk0s2 I/O Error
    Your hard drive is failing.
    if that fixes some stuff, make sure you type
    mount -uw /
    and then
    halt to shutdown

  • Safari quits -- blank page for 3 seconds after apple update -- cannot run

    I have a G-4 version 10.4.7. This apple runs good -- but, yesterday I received a standard update files from apple and did an update -- afterwards, my "safari" stopped running.
    Safari will open up for about 3 seconds and disappear. The template is there for about 3 seconds and doesn't allow me to type in anything in the search area. This all happened after a routine up-date from apple (not sure if this is the cause or not).
    Any ideas on how to get the sarafi up and running again? States "application quit unexpectedly.: mac os x and othe applications are not affected. click reopen -- then happens all over again. Any simple ways to solve this?

    Hello Nantucket Whaler, Welcome to Discussions
    ( a distance from the Gray Lady ; )
    Did you do permissions repair with the disk utility before and after the install do you follow these guidelines for installing os updates:
    1. Backup your data. If unsure what is the best method of backing up your data to keep it safe, be sure to start your own topic here and many posters will be glad to find the best method for your needs.
    2. Turn off Energy Saver and any automatic software updating mechanism from Quicktime, to Software Update, to third party updates.
    3. Dismount (if a data storage peripheral) and disconnect third party peripherals.
    4. Verify all your software including drivers for third party devices are known to work with the update in question, or needs the update.
    If it does not need the update to run stop right here, and keep on using the version of the operating system you are running.
    5. Do not update if your system is slow or unhealthy. Troubleshoot any system issues you may have with fonts, cache, or preferences before updating.
    6. Make sure all Apple Applications are stored in the Applications folder (except Applications Mac OS 9 for Classic applications).
    7. Repair permissions with Applications -> Utilities -> Disk Utility.
    8. Apply the right update for your machine. Use Apple menu -> About This Mac to determine if you have a G3, G4, G5 (PowerPC, also known as PPC), or Intel. Here are the updates by platform:
    Above from a.brodys Topic: Now that 10.4.6 is out, let's review the upgrade steps.
    It applies to 10.4.7 as well.
    The fix may be to " Following these steps and reinstall the 10.4.7 Combo up, make sure it is the right one for your computer ppc vs. intel.
    However first:
    Go to the home folder/~Library/Logs/Crash reporter/ Safari locate the most recent crash log starts from the date and next date indicatse a second log please post only 1, the last on is usually the latest check the dates, copy and paste the enire log here in a post.
    Then do a repair permissions-> with Disk Utility -> Applications/Utililies folder .
    Eme

  • How to get which tables are being updated by running any transaction code

    Hi experts,
    please tell me how to find which system table are being updated after running any transaction code .
    please tell me the procedure to find that.
    Thanks & Regards,
    Yogesh

    Hi yogesh patil,
    for the dbtable..
    goto technical settings and activate the log...
    it will tells u..
    transaction...Table history (SCU3)
    Log data changes
    The logging flag defines whether changes to the data records of a table
    should be logged. If logging is activated, every change (with UPDATE,
    DELETE) to an existing data record by a user or an application program
    is recorded in a log table in the database.
    Note: Activating logging slows down accesses that change the table.
    First of all, a record must be written in the log table for each change.
    Secondly, many users access this log table in parallel. This could cause
    lock situations even though the users are working with different
    application tables.
    Dependencies
    Logging only takes place if parameter rec/client in the system profile
    is set correctly. Setting the flag on its own does not cause the table
    changes to be logged.
    The existing logs can be displayed with Transaction Table history (SCU3)
    Reward points if helpful

  • Windows update cannot run because service is not working.

    Thinkpad E545, Windows 7 (64 bit) Professional.  When I attempt to run Windows Update I get the message "Windows update cannot currently check for updates because the service is not working."  Microsoft Fix-It does not help.  I found a YouTube posted by Richard Lloyd and followed the steps:  the Windows Update service is running, the Background service is running.  Several web sources including Microsoft point to an Intel RST driver.  I downloaded this driver g1io15ww.exe and ran the file, but still no joy.  A solution would be welcome, and Happy Thanksgiving.  --  Alan

    Hello and welcome,
    Your laptop is AMD-based (IIRC) so an Intel driver isn't going to help.
    If the update issue is caused by the AHCI driver incorrectly reporting physical sector size (that's what those IRST reports are about) it might be fixed by installing the correct  AHCI driver for your laptop:
    http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-edge-laptops/thinkpad-edge-e5...
    There are other reasons for Win update failures, so this isn't a sure thing. Worth a try, maybe. I've personally only seen this issue with Intel hardware.
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • [SOLVED]Cannot run own program since last update : malloc.c:3096 error

    Hi all,
    It seems that due to a recent update a program that I am working on doesn't run any more.
    It doesn't rely on any external libraries and compiles fine, but when it gets to a : "pointer = new class_object[4096];" it crashes with the error:
    malloc.c:3096: sYSMALLOc: Assertion `(old_top == (((mbinptr) (((char *) &((av)->bins[((1) - 1) * 2])) - __builtin_offsetof (struct malloc_chunk, fd)))) && old_size == 0) || ((unsigned long) (old_size) >= (unsigned long)((((__builtin_offsetof (struct malloc_chunk, fd_nextsize))+((2 * (sizeof(size_t))) - 1)) & ~((2 * (sizeof(size_t))) - 1))) && ((old_top)->size & 0x1) && ((unsigned long)old_end & pagemask) == 0)' failed.
    Aborted
    I've done some searching but have been unable to find much other than this thread: http://bbs.archlinux.org/viewtopic.php?pid=654908 which leads me to believe that it might be a library version conflict. I am unsure how to debug this though. I also own an nvidia card running nvidia drivers, and the nvidia drivers were updated in the last update but I do not have the same file that the previous poster had a conflict with. I am also not sure how the nvidia drivers would cause problems as I'm not linking with OpenGL or any library other than the standard library.
    Does anyone have any ideas?
    Thanks!
    Last edited by neutrix (2010-02-17 15:05:01)

    Well this problem works both in debug and release builds. I've got the bug down to the individual line that it crashes at, I create an instance of a class like this:
    Vec3 *vectorlist;
    vectorlist = new Vec3[5012]; //CRASHES ON THIS LINE
    Vec3 is a class that I've defined for 3D vectors. It doesn't do anything complicated or special, the constructor simply initializes the 3 components of the vector to 0. I am happy to post the full code (it isn't very complex) if someone else wants to try compiling it to see if it works on their computer.
    I think the problem might not be in my code (considering it worked before the update), but instead might be some clash between library versions as in the thread that I linked to in my first post. I am not sure how to go about debugging a problem like this though.

  • Cannot run any java Programs

    I cannot get any java applications to run whenever I try I get
    Exception in thread "main" java.lang.NoClassDefFoundError: jedit40install/jar
    for any application that I try to run. I was able to compile a application but not run it. I tried launching it via java -classpath . jeditinstall.jar and i recieved the error again. I am running RedHat 7.3 on a 686 with 512mb ram. Below are my enviroment variables that I have set.
    export JAVA_HOME=/usr/java/j2sdk1.4.0
    export PATH=$PATH:$JAVA_HOME/bin
    export CLASSPATH=.
    Any help would be appreciated.

    I'm not exactly sure of the root to your problem but maybe you can try setting the classpath to contain the JAR file that you are running?
    Also...I think you should be launching a JAR file by:
    java -classpath -jar jeditinstall.jar
    Hope this helps :)

  • Cannot run any report in oas10g and db 11g

    Hi,
    I have a trouble with OAS Reports Services 10gR2 (in Windows server) when I connect to Database 11g (in Oracle Linux server), because I can't run any report.
    This issue not exist when I connect to another database server with 9i, all reports run fine!
    Exist any restriction or compatibility issue with OAS10g and DB11g?
    Can be an special configuration in $ORACLE_HOME/reports/conf/<report server>.conf?

    I found the problem I forget to run rw_server.sql in 11g.
    Please not consider this post.
    Edited by: Fadel on 27-06-2012 10:19 PM

  • Cannot run any of my CC software.

    I have a current subscription to the cloud service and recently I am unable to run any of my programs like Premiere.
    I can't open the adobe creative cloud desktop app.
    I can't open my programs directly like Premiere.
    Adobe Application manager seems to crash every time it launches.
    I can't uninstall any of my adobe products as the uninstaller hangs and most likely crashes.
    I can't get the installer to run at all period.
    I've restarted my machine several times in hopes that it will fix itself.
    I run Mac OSX 10.7.5 on a stock Macbook pro Late 2011 model.
    What are my options as all the logical other choices are sabotage by the garbage desktop and application manager app?

    http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    Mylenium

Maybe you are looking for