After 10.6 update, cannot connect to remote speakers

After I updated itunes on my windows 7 (64 bit) machine to version 10.6.1.7, itunes does not show my remote speakers connected through an airport express.  My windows XP machine with itunes version 10.5.3.3 does show my remote speakers and can stream music to them through the airport express.  Both machines are on the same network behined the same firewall.  Furthermore all other "i" products in the house can stream through the airport express to the remote speakers (2 iphones & 2 ipads).  Nothing has changes except for the Win 7 itunes upgrade to 10.6.1.7.  Is there a way to roll back the itunes upgrade?  Or is there a fix for 10.6.1.7?

Ok, I've just done that. An error message came up, with half an email address so I changed the year date back and opened passbook.. Then it asked to connect to iTunes, it didn't display the "cannot connect.." message, just showed loading and the wheel going around for ages. Regretting this update, so much hassle. Thank you for your help so far though. Seems like so many people are having the same problems :(

Similar Messages

  • ITunes cannot connect to remote speakers / Airport Express

    Hi Guys
    This is a quick post with a problem & solution.
    I've been searching for ages tonight to find a solution to my problem:
    'iTunes suddenly cannot connect to my Airport Express Speakers" and could not find one answer on here, only a mixture of replies all over the net.
    So, just incase some people are still looking for an answer:
    What I did...
    1. Go to System Preferences, Network.
    2. Click Advanced, on the TCP/IP tab, set "Configure IPv6" to Off.
    Open up Airport Utility, go to the Music tab, set a password (I did this just for the sake of seeing whether iTunes noticed that the Airport was now password protected, then atleast you know it's talking!)
    3. Open iTunes, go to preferences.
    4. Click on the devices tab, untick "Look for remote speakers connected with Airplay, Allow iTunes control from Remote Speakers, Forget All Remotes.
    5. Close iTunes
    6. Open iTunes, retick "Look for remote speakers connected with Airplay, Allow iTunes control from Remote Speakers, Forget All Remotes.
    7. Connect to remote speakers worked!

    thanks Simius,
    I just tried what you said to do, i had it in Automatic, but when I momenterely switched to manual the fields were all blank so I left them that way and turned on to automatic as you said and left it in auto, then tried to change itunes speaker to remote airplay and it didn t work.
    so i don t know what else to do, I read alot about this in the last few days the bug seems to be related to the newest itunes upgrade and with the presence of the IP6V not turned off completely.
    in the old system one could turn it off completely, now the off button is gone.
    there are work around using terminal, I tried that but it doens t recognize my commands, so it didn t work either.
    anybody has any idea?
    thansk a lot
    D.

  • After iOS 6 Update, cannot connect to iTunes store, PassBook doesn't work and my carrier is set to "EE" instead of Orange-UK. Help appreciated!

    I have an iPhone 4, 8gb and have just downloaded iOS 6...
    I am so disappointed!
    My iTunes store fails to open or connect to anything. Passbook fails to launch properly- asks to connect to iTunes store, then fails because that doesnt work either.
    Where my carrier in the top left is meant to say Orange (I'm in the U.K) it now says "EE". I'm frustrated. This took over an hour to do and it's done nothing but mess up my phone. Please sort it out!!

    Ok, I've just done that. An error message came up, with half an email address so I changed the year date back and opened passbook.. Then it asked to connect to iTunes, it didn't display the "cannot connect.." message, just showed loading and the wheel going around for ages. Regretting this update, so much hassle. Thank you for your help so far though. Seems like so many people are having the same problems :(

  • After ios 5 update cannot connect to home wifi

    it worked just before i installed ios 5 and now I cannot connect to my wifi. iphone still connects

    Same for me.
    I have to reset my comcast modem to get the iphone to submit the password.
    Otherwise i just get a message "unable to connect to HOMExxxx"
    After I reset the modem then I get the password request.
    Password should be retained in the iPhone.
    Got the iPhone connected on Sunday night and then Monday morning had to go through the whole routine again.
    Comcast password is many characters so this is problematic.

  • Cannot connect to remote speakers through Airport Express

    Please help me! Please for the love of the mac guy on tv who encouraged me to switch.
    I've been a happy mac user. I am not all that technically saavy and hence switched to a mac because "it just works." I bought the airport express and hooked it up through my WIRED network so that I could play tunes on my stereo from iTunes. Things have worked amazing and have had no problems until now. I don't even have the option now to look at remote speakers.
    I know this is a common problem. This issue was even posted on Engadget for crying out loud. I've been reading these forums for the better part of the day trying things and I think I've actually made things worse.
    I've resetted my airport express (now my iMac can't even find it). The AE still works though because my work computer can still see it and hook up to the internet through it. I've enabled IPv6 and have disabled IPv6 (have seen some conflicting information on that). I've went into the firewall settings and even added a port (5353) from another post I read. I've checked and double checked my iTunes settings and the option to check for remote speakers is on. I believe all of this happened since my iTunes was upgraded to the latest. For a computer that is supposed to just work, well, it just stopped working (the one issue).
    I don't know if it shows, but I have an iMac G5 with OS 10.3.9. I know that's kind of old now, but the computer has been doing everything I've needed it to do. I like it. I just want this to work. So, I am begging anyone with any knowledge to pleeeeease help me out. Don't crucify me for not reading the other discussions. I have. I put in a great effort. Now again, I plead, help me - even if it takes a back and forth effort for a while. I thank all in advance for trying.

    That's the other thing, AirPort setup assistant doesn't allow me to get very far. I get to the introduction page and click continue to begin. Then I get an error message saying I have no AirPort card installed (which is true, but not necessary because I'm on a wired network to get to the airport express base station).
    Unfortunately, the AirPort Setup Assistant requires a wireless connection to work so the error you are getting when using it would be normal. Your options would be to use the AirPort Admin Utility or use the newer AirPort Utility on the Dell to administer your 802.11g AirPort Express Base Station (AX). The latest version of this newer utility can be downloaded from here: AirPort Utility Setup 5.3.2 for Windows
    If I click New then an error message pops up saing No new AirPort networks were found. Click continue to scan again. I can keep doing this with the same result.
    When having difficulties accessing the base station from the AirPort Admin Utility, try the following:
    o Make sure that you connect to the wireless network, created by the AX, before you attempt to access it with the utility. The default Network Name (or SSID) will be something like Apple Network xxxxxx, where the x's are the last six digits of the base station's AirPort ID.
    o If the utility still doesn't find the base station, try temporarily connecting your computer directly, using an Ethernet cable, to the Ethernet port of the AX, and then, try accessing it again.
    o If the utility still can't find it, the I suggest that you perform a "factory default" reset on the AX. Note: You may have to try this several times, but be sure that you get the rapid flashing status light to verify that the reset took. After successfully resetting the AX, and while still connected by Ethernet, try to access it with the AirPort Admin Utility again.

  • Cannot connect to remote speakers using Airport Express

    Yesterday I was able to connect to my hi-fi using remote speakers in iTunes 6.0.4 through my Airport Express (AE) and take full advantage of Front Row, however later in the day the speaker selecton pop-button in iTunes disappeared. I did a hard-reset of the AE unit, shutdown the computer, checked the preferences selection in iTunes etc, all without success. I checked the discussion boards of both iTunes and Airport for a solution. Found something interested where someone said that they shutdown the computer and went to bed and in the morning, hey presto everything was working. He thought that having a good night's sleep was the solution. So, I shutdown the computer and went to bed. The next morning, the light on the AE was green and after booting up my iMac Intel the pop-button reappeared (I still don't know what solved the problem) but now it will not connect to the speakers. It tries but gives us after 30 seconds or so.
    Here is what I have done so far: I used Airport setup assistant to set up the AE. During that process I selected to join an existing network that is provided by my Airport Extreme base station and I selected to only use the AE to share a printer and play iTunes using WDS bridging. This process works every time.
    Right now, the light on the AE unit is flashing amber. In Airport Admin Utility both the Extreme and the Express are listed but the Extreme has an IP address of the 10.0.x.x variety whereas the Express has an IP address 169.254.x.x variety! Strange. If I double-click on the Express it takes an age to get a response and when the response eventually comes - asking for the password I then get an error saying that "the airport admin utility was unable to read the configuration of the selected base station.
    I have tried resetting and repeating the above without success. Therefore, any other ideas or help would be greatly appreciated. I want to boast about Front Row to my Windows friends without the embarrassment of connection problems

    I am having almost exactly the same trouble with an Airport network I recently set up in my home. I have a G5 with a brand new Airport card, an Airport Extreme Base Station (also brand new) in the same room acting as my internet portal, and an Airport Express (yup--brand new) downstairs piping iTunes to the stereo.
    I could get the G5 and Extreme base to talk without a hitch--they are right next to one another, after all. When I tried to link the Express into the same network, the Express vanishes. When I tried moving it into the same room with the Extreme, I could find it, and play tunes through a set of headphones. Moving to an outlet in the hall outside the room, it still worked. Moved to an outlet on the far wall of the room across the hall, it would play only sporadically, dropping out about 4 seconds out of every six. Anywhere else, and it wouldn't show up at all.
    However, when I set up the Express to be a separate network, my G5 was able to access it and play music without difficulty, anywhere in the house. I've been playing iTunes on my stereo for weeks, with the downside that I can't do that and surf the web at the same time.
    Last night I tried the experiment of moving the Extreme Base Station around. With my G5 in the living room, in the approximate center of the house (1/2-level above the basement, 1/2-level below the office--it's a split level), I was able to access the Express and play tunes on the stereo as usual. With the Extreme Base downstairs, right next to the Express, my G5 could not even locate its signal. Fifteen feet closer to the center of the house (but still downstairs): couldn't find it. At the base of the stairs: couldn't find it. At the top of the stairs (20 feet from the G5, but just around a corner): couldn't find it. Three feet out into the foyer at the top of the stairs (and now in a direct line of sight to the G5): 20-30% signal. Keep in mind that during all this, I could switch over to the Express network at will (75% signal) and play music downstairs without a hiccup.
    It seems to me that there's something wrong with the Extreme Station itself (or at least, with the way it's trying to communicate). If it were external interference due to an outside network, a microwave oven, or a 2.4 GHz cordless telephone, I would expect it to effect both networks equally--but it isn't. The Express seems impervious. I've noticed in another set of posts that some people with wireless connection problems have found that switching from the most recent version of the Extreme Base firmware (5.7) to an older one (5.5.1) has fixed the problem. I plan to give it a shot myself. I'll let you know how it turns out.
    Dual 2.5 GHz G5   Mac OS X (10.3.9)  

  • After 4.2 update cannot connect to internet

    Having just updated my Airport Express with the latest update 4.2 I now seem unable to connect to the internet. Yet when I the Ethernet cable directly into my powerbook, no problems. I've run the assistant countless times, Ethernet cable connected, unconnected, completed a hard reset and re-started everything. When I check the Airport Admin Utilty, all the information for my ISP has been detected by the unit and is visable and the second Express unit with printer and speakers seems unaffected. Is there a glitch in the update???

    Cheers Paul, for the advice.
    I tried but without any luck. Finally I decided to take the advice of NigelReves1 (Topic:airport 4.2 update...no Internet (negotiating PPPoE) Message 7.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1
    Downloaded "Binary File" (see link) to desk top and uploaded using the Airport Admin Utility. This puts Airport back to it's 'box like' state. Did a hard reset on both units, run the Assistant and I am delighted to say...It's all systems go!!! So a big Thanks to Nigel!!!
    http://www.apple.com/support/downloads/airportexpressfirmware60.html
    Anyone trying this, don't be tempted to click OK when you see the prompt 'There is a newer version of software available 6.2'! Otherwise you'll be back where you started!!!
    Mark

  • When trying to install apps from app store it does not prompt an apple id and after 15 minutes says "cannot connect to itunes store"

    When trying to install apps from app store it does not prompt an apple id and after 15 minutes says "cannot connect to itunes store".

    Your Apple ID may be greyed out because of restrictions. Settings>General>Restrictions>Allowed Changes>Accounts. If you set that restriction, your ID will be greyed out. Nobody can make changes to the account without entering the passcode to change disable the restriction.
    Maybe something in here will help, even though this is not exactly what you are experiencing.
    Can't connect to the iTunes Store - Support - Apple
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/

  • ITunes 8: I can no longer connect to remote speakers via Airport Express

    Cannot connect to my remote speakers, worked before iTunes 8"
    I have restarted the computer, iTunes, QT 7.5.5, run disk utility
    I get the following error code (-3256) Apple KB research says:
    AirTunes: Error -3256 when streaming to multiple AirPort Express units 
You may see this message: An error occurred while connecting to the remote speaker speaker_name . An unknown error occurred (- 3256 ).This occurs with iTunes 6.0.2 or later.SolutionIf you use a third-party firewall or router, make sure that it is configured to permit UDP traffic.
http://docs.info.apple.com/article.html?artnum=303157
    I followed the KB link, tried KB solution, then I sent this off to Apple.
    "Mac G5 2.0 Ghz, OS 10.5.4 just installed iTunes 8, one (1) Airport Express connected to remote speakers. Firewall under Sharing in System preferences does not offer firewall access. Firewall is under Security but "Advanced" is grayed out.
    Cannot connect to my remote speakers, worked before iTunes 8"
    I have restarted the computer, iTunes, QT 7.5.5, run disk utility, unplugged the airport express.
    My G4 PowerBook running an earlier version of iTunes connects without problem.

    I just got off a 30+ minute phone call with an Apple Support rep about this. I'm getting error -3256. The rep was patient and tried hard to solve the problem, but was basically clueless. I have a case number and was encouraged to call back tomorrow to speak with a product support specialist.
    This stinks. AirTunes is my primary way of playing music from my computer. With no obvious way of rolling back to iTunes 7, this is a big deal.

  • Error when connecting to remote speakers on intunes.

    Everything is showing up on laptop but when I try to connect to remote speakers it says error. I also on my main computer where all my iTunes are located I cannot find the remote speaker symbol on the bottom of the screen. I am so close to getting this to work it is driving me crazy!! Any help would be appreciated.

    Would you please describe in a bit more detail what your current networking configuration is? That is include the make & mode of each of the network devices (routers, modems, etc.) Also, please describe the general location of each, including the laptop (where you typically use it) and the "main" computer in relation to the AirPort Express? For example, are they all in the same room, in different rooms, on different floors?

  • HT4587 I can't locate airport express icon in itunes to connect my remote speakers wirelessly, can anyone help please?

    Can anyone help please? I am trying to connect my remote speakers to my i-tunes library using Airport Express. Everything is connected and working using mt OS device (Ipod Touch 5th Generation) that works fine. I have tuned on home sharing and it says in itunes preferences that I am paired but according to the light on the airport express base station I am not connected to my existing wi-fi network. I cannot find the itune airplay icon anywhere in itunes nor can I find the network link by hovering my pointer of the network connections as suggested in the instructions that came with airport express. Would apprecaite some help please you can give. - thank you.

    hmmmmm.
    i'm not trying to get rid of you here, but it might be worth also checking-in/reposting over at the Airport for Windows forum. when Airtunes things get sticky, i generally defer to iFelix or RJ in WI, and they spend a lot more time over there than they do here.
    (traffic is so heavy in here at the moment that this thread might be buried out of sight before an AirTunes guru gets to see you.)
    here's a link through to the Airport for Windows forum:
    Airport for Windows

  • Itunes 9 won't connect to remote speakers when firewall on?

    Hello all
    Got an annoying problem streaming to Airport Express. Hopefully somebody has come accross this or has a suggestion on how to resolve it.
    When Itunes 9 tries to connect to remote speakers linked to AE it give an error message of something like "error connecting to remove speakers ASDFDSFLDSF. unknown error(-15000)". I have noticed that when I turn my firewall (ZoneLabs) off everything is fine. I have put Itunes on the program list of trusted programs but this doesn't help matters.
    Airport express is about 1 month old and has all recent updated.
    Anyone got any idea what I should be doing?
    Thanks in advance,Andrew

    When Itunes 9 tries to connect to remote speakers linked to AE it give an error message of something like "error connecting to remove speakers ASDFDSFLDSF. unknown error(-15000)".
    With any luck, the following troubleshooting document may be of some help with that:
    [Error -3256 or -15000 when streaming to AirPort Express base stations using iTunes|http://support.apple.com/kb/TS2278]
    EDIT: drat ... sorry, that one's for the Mac ... okay, will look a bit further to try to track down the relevant Windows firewall settings. At any rate, if you're behind on your Firmware versions, it would still be worth checking on that.
    Message was edited by: b noir

  • Connecting to remote speakers

    Have brand-new MacBook. Was connected to remote speakers. Now connection has vanished from airplay icon pull-down list. Tried connecting twice. No luck. Any suggestions?

    Yes, this problem is known since iTunes 9 and Apple does not fix it yet. I am ****** off. I have tried everything, change settings, restart both mac and Airport, change settings of wireless connection, but still iTunes connects to speakers randomly and today I can not connect, I am really ****** off!

  • Upgrade to iTunes 7.2 broke connection with remote speakers

    There have been a few discussions about the inability of iTunes to connect to remote speakers in the past, and I found one that was answered regarding an upgrade to 7.0 back in September 2006 - b noir recommended the help article posted on his page: http://docs.info.apple.com/article.html?artnum=304371
    My issue is the same as the one posted in Sept. 2006, but it only started when I downloaded the upgrade to iTunes 7.2. I see the remote speakers greyed out in my iTunes speaker list but can't select them. The fix in the help article above of configuring IPv6 doesn't help. Has anyone else run into this/have any suggestions for me? My wireless network consists of 2 Airport Expresses; the extension is the one hooked up to my speakers.
    Many, many thanks!

    I'm experiencing something similar where my remote speakers are working well from my Macs (wired) and Windows Vista laptop (wireless) but do not show up at all from my Windows XP desktop (wired).
    I do have Symantec Personal Firewall running, but I have (1) trusted my local internal network, (2) explicitly opened ports 3689 and 5353 and (3) tried it with the firewall disabled with no luck. I do not have Windows Firewall running, and I don't believe I have anything else that would be limiting network traffic. I do not have Bonjour or Rendevous services running. I can ping the AEs just fine (I have 3 AEs), and I am on the same subnet. I have selected LOOK FOR REMOTE SPEAKERS in the iTunes settings, and I am running the latest version of iTunes (7.2). I have also not tried downgraded to an earlier version of iTunes, but for now I'd rather get this fixed in another fashion as 7.2 works well from my other machines.
    I hope the above description (with fixes recommended by other users in other threads) is helpful. I appreciate any input or feedback people may have.

  • ITunes Error -3256 can't connect to remote speakers

    iTunes is behaving erratically. I get a -3256 error when the app tries to connect to remote speakers via an AirPort Express.
    Restarting iTunes allows me to connect. iTunes then works until my computer goes to sleep. When I wake the computer it hangs with the -3256 error again. Restart iTunes and it negotiates the network connection perfectly.
    I ran AirTunes with no problem for years until version 8 of iTunes was released.
    I'm running iTunes 8.0.2

    I'm having the same problem with my macbook pro (OS 10.5.6, iTunes 8.0.2) but NOT with my imac flatpanel 15". I get "An error occurred while connecting to the remote speaker "Stereo". An unknown error occurred (-3256)." Restarting iTunes does NOT work for me.
    My airport is administered by the older imac flatpanel. My girlfriend's computer - an older macbook pro - does NOT have this problem. Has anyone gotten an answer yet on this?
    Is this a known bug since so many of us seem to be seeing it?

Maybe you are looking for