After 10.9.1 Upgrade, Mail Account Not Connected

Mail accounts (pop) are not staying connected after the upgrade when the Mail app opened.

It seems all is well this morning. So, Mail might not have any issues, and it might have been my company's host was experiencing problems that coincidentally occurred right after I had upgraded to 10.9.1.

Similar Messages

  • Mail accounts not connecting after resume

    This started about a week ago suddenly, not after any updates or new software installs.
    I have 2 e-mail accounts set up within the Mail app which were working fine for years.  Now they randomly show the exclamation mark next to them and won't connect.  This seems to happen more after resume.  Connection doctor shows that a varying combination of IMAP and SMTP in each account aren't connecting, and tells me to check settings and SSLs.
    Have installed Thunderbird to check if this is Mail app specific, but that's also unstable.
    I'm unsure what to do - closing and restarting the app sometimes works.  Restarting the computer almost always works.  I've deleted and re-added both accounts to no avail.
    Has anyone had anything similar?  How was it fixed.  I'd rather not do a clean install.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output andWi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode by putting the system to sleep and waking it up. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Mail Account Not Connecting?

    I have two mail accounts named account1 and account2.  When I click on "Get new messages from all acounts" account1 behaves perfectly.  But account2 does nothing and the activity window simply says "[account2] Fetching sending password" and shows a progress bar with a red stop sign icon.  After a while the window goes blank.  If I send an email to account2 and go check the mail at comcast.net the message will be there, as expected, but it never shows up in the mail application mailbox "account2" - the malbox then shows the grey triangle with exclamation mark in the mail application sidebar.  Any help???

    Maybe Window > Connection Doctor from Apple Mail's menu will help.
    Also, clicking on the exclamation mark(s) may provide additional information.

  • Mail account not connecting to server

    Email on iPhone 5 not connecting to server even though setup is identical to another hone that works.

    Try deleting the account and then adding back.

  • After Mavericks upgrade Mail 7 not automatically fetching new emails

    Hello,
    Since the Mavericks upgrade, Mail is not anymore automatically fetching new emails, but at the initial lauch.
    I tried to modifity the settings, from 'Automatic', to 5 minute, to 15 minutes, stopping Mail and starting again each time but it does not help.
    Emails are fetched only after the lauch of Mail, and when I manually ask Mail to do it.
    It's really annoying.
    I saw on French forums, that I'm not the only user reporting this, but I don't see many posts on the Apple forum with the exact same issue.
    I don't know what to do to fix/find a workround for this problem.
    If someone has any idea, I'm more than open to try it.

    Try this workaround until Apple fixes it.
    Copy this into a plain text file (i.e TextExit in plain text mode)
    Save as com.yourname.Checkmail.plist to ~/Library/LaunchAgents/
    Log out and back in, or re-boot
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
              <key>Label</key>
              <string>com.yourname.Checkmail</string>
              <key>ProgramArguments</key>
              <array>
                        <string>/usr/bin/osascript</string>
                        <string>-e</string>
                        <string>tell application "Mail" to check for new mail</string>
              </array>
              <key>StartInterval</key>
              <integer>60</integer>
    </dict>
    </plist>
    This is set to check every minute (<integer>60</integer>), change to your needs (in seconds)

  • HT204053 Is it possible to have two (or more) different icloud mail accounts (not alias) under the same apple id? If not what is you best advice for all family members to have their own e-mail and still share the purchases under the same apple id. Thanks

    Is it possible to have two (or more) different icloud mail accounts (not alias) under the same apple id? If not what is you best advice for all family members to have their own e-mail and still share the purchases under the same apple id. Thanks

    mannyace wrote:
    Thanks for the response.
    So I basically won't run into any trouble? I
    There should be no issues. Its designed to work like that.  You don't change Apple IDs just because you get a new device.
    mannyace wrote:
    Thanks for the response.
    Is there any chance that the phones can fall out of sync?
    Unlikely. But nothing is impossible.   Though I don;t see how that would happen. As long as both are signed into the Same Apple ID / iCloud Account they will be N'Sync. (Bad Joke)
    mannyace wrote:
    Thanks for the response.
    If I get a message or buy an app or take a photo on the iPhone 5, how do I get those things onto the iPhone 6?
    If you buy an App, you have 2 ways to get it to the iPhone6: If Automatic Downloads is enabled in Settings->iTunes & App Store, it will automatically download to the iPhone 6 when you buy it on the 5 and vice versa if you buy it on the 6, it will download to the 5.
    Alternatively, you can simply go to the App Store App->Updates->Purchased and look for the App there and download it. Purchased Apps will not require payment again. i.e They'll be free to download to the iPhone 6 once purchased.
    SMS Messages will sync over using Continuity as long as they are on the same Wifi network. Otherwise, restoring the iPhone 5 backup to the iPhone 6 will transfer all messages received up until the backup was made onto the iPhone 6.
    Images, can be transferred either through Photo Stream
    My Photo Stream FAQ - Apple Support
    Or any Cloud service you want such as Dropbox, or One Drive.
    mannyace wrote:
    Also, something i forgot to ask initially: Should I update the iPhone 5 to iOS 8 first or does that not matter?
    If you want the Continuity features as explained above you need to update the iPhone 5 to iOS 8. Otherwise its not all that important.

  • I have a MacBook pro version 10.6.7 with snow leopard. After an scheduled software upgrade I could not open Quicken (It said it could not open the files). Now I can only open it if I have my external drive on. Can you help?

    I have a MacBook pro version 10.6.7 with snow leopard. After an scheduled software upgrade I could not open Quicken (It said it could not open the files). Now I can only open it if I have my external drive on. Can you help?
    All the information that I had input on Quicken is gone. I have to have the external hard drive that I use to back up to be able to use quicken now. It is as if it was erased from the laptop hardrive

    Try repairing permissions. My favorite way is with a utility called AppleJack. Info and download here. It's free. It only works when you boot in Single User Mode. When restarting or booting, hold down the Command key and S keys.
    You will get a very different startup screen that looks like the Terminal app has hijacked the screen. Just let the lines of text scroll by. When that happens you will get a text entry prompt. Type in "AppleJack" without the quotation marks.
    A DOS looking menu will appear. Choose 1 or d to run Disk Repair. If you get a message that Disk Repair found and corrected errors, run it again. Repeat until you get the "your disk appears to be ok" message. This rarely happens with my experience, though. This does the same thing as as booting from an external drive and running Disk Utility's repair. Only, no external drive is required!
    Next, choose 2 or p to repair disk permissions. This will take a little while. AppleJack warns that it will take up to an half hour to run repair permissions. It'n never taken more than about ten minutes for my MacBook Pro.
    As permissions are repaired, you will see each repair scroll on the screen. When done, the menu returns, choose q to quit. Then at the prompt, enter "exit" without the quotes. Your MacBook Pro should restart into Mac OS normally after this.
    Hope this helps.

  • After updating to yosemite my mail will not import my mailboxes so it won't open mail at all HELP please

    after updating to yosemite my mail will not import my mailboxes so it won't open mail at all HELP please

    I have the same problem. The mail app doesn't work properly. Either cannot connected to the server or fail to connect. But the network is totally find and work well as i can open website.
    Another problem is sync to the software, like Evernote, nustore,  fail to connect to the server, cannot sync anymore.

  • TS4002 I can not activate my iphone after running the software for icloud account not remember, I wish abble to open my computer soon. My phone IMEI 013007007033970

    I can not activate my iphone after running the software for icloud account not remember, I wish abble to open my computer soon. My phone IMEI 013007007033970

    Hi nguyen trong thang,
    I apologize, I'm a bit unclear on the exact nature of your issue. If you are saying that you are having issues activating your iPhone, you may find the troubleshooting steps in the following article helpful:
    iPhone: Troubleshooting activation issues
    http://support.apple.com/kb/ts3424
    Regards,
    - Brenden

  • After 4.3.3 upgrade ipod does not shuffle songs

    After 4.3.3 upgrade ipod does not shuffle songs. The stop shuffling after any interruption occurs. So If play in the card, get a call, answer it then go back to the music, I have to manually select shuffle. This did not occur prior to the IOS update.

    WEP and Apple products are only somewhat compatible - as you are finding out. If you create your own passwords, then you have to follow specific rules - 48 bit, 5 characters, 128 bit, 14 characters. Shorter or longer, the password won't work.
    If you are stuck with WEP (I'd update the laptops with a USB wireless stick before I used WEP, but that's your decision) try the following:
    1. Use the 128 bit setting
    2. Either create a 14 character password or use WEP key 1 (that's the hex key) in place of your password on the touch.
    You could set up a second wireless access point and, as long as it used a different SSID, setup to run WPA2-AES encryption. That would take care of your modern devices.

  • So I have updated my iphone4 GSM to ios 6.01, however after updating, my safari and mail could not work anymore, when i open these 2 apps, it just opens and hangs then it crashes.

    So I have updated my iphone4 GSM to ios 6.01, however after updating, my safari and mail could not work anymore, when i open these 2 apps, it just opens and hangs then it crashes.
    anybody can help me ?

    So I have updated my iphone4 GSM to ios 6.01, however after updating, my safari and mail could not work anymore, when i open these 2 apps, it just opens and hangs then it crashes.
    anybody can help me ?

  • Mail Will Not Connect

    As of yesterday evening (September 12th, 2009), I have been unable to receive new emails into Apple Mail, and also was unable to connect to iChat. The second issue was solved by resetting to port 443, but after scouring the forums I have not found a similar fix for Mail that has worked for me. I have already tried restarting the computer, running software updates, and deleting the mail preferences from the library -- this last one worked until I tried to set up my accounts again, at which point I received this message:
    "The Mobile Me IMAP server "mail.mac.com" is not responding. Try checking the network connection, and that the server name is correct. Otherwise, the server might be temporarily unavailable."
    If this is the case, that the server is simply unavailable at this time, I'm willing to accept that. However, I'm receiving a similar message when I try to set up my gmail account, and I am inclined to believe that both servers have not gone down at the same time.
    I don't care about loosing old emails by setting up the accounts again and starting fresh, but I don't seem to be able to receive mail that way either. Is there anything else that I can reset in account preferences? Should I perhaps try a manual setup for the accounts?
    Thank you--
    --Silvertrumpeter

    I do not believe that this is a password issue. After watching the Activity window and the Connection Doctor, I got a message suggesting that I turn off SSL and try again. So I did, and watched the Activity and Connections windows again, with the same result. The Connections Doctor window tells me this:
    "Connection Status: Mail was able to connect to the internet."
    But next to my mobile me account name is the red status light, and the message that mail "Could not connect to this MobileMe IMAP server. Check your network connection and that you entered the correct information in the account preferences." Now, since this was all set up automatically, I'm guessing that I have not entered any incorrect information, but if anyone knows exactly what it should say, I'd be grateful to have that information.

  • HT4528 Non apple email accounts not connecting to server. How do we fix this issue?

    Non apple email accounts not connecting to server. How do we fix this issue?

    Hello countingBLUEcars,
    We've an article that can help get your Mail moving again.
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/TS3899
    Cheers,
    Allen

  • Javax.mail.MessagingException: Not Connected

    Hi All,
    I am trying to read the message from pop.gmail.com using JavaMail API.I ma using POP3 protocol for it.
    But I got the following Exception
    javax.mail.MessagingException: Not Connected
    at com.sun.mail.pop3.POP3Store.checkConnected(POP3Store.java:279)
         at com.sun.mail.pop3.POP3Store.getFolder(POP3Store.java:261)
         at MailReceipt.connect(MailReceipt.java:97)
         at MailReceipt.mailRecieve(MailReceipt.java:62)
         at MailReceipt.main(MailReceipt.java:53)
    I got This Error at the line
    folder = store.getFolder("INBOX");
    in my program.
    Please Help me ion this regards.Thanks in Adnavce..
    Thanx & Regards
    Sandeep Verma

    Well, I've never used this API but it seems 100% clear what's wrong. And 5 seconds with Google has revealed that there's a method on that class which looks like it will address the issue.
    If you can't even read basic error messages, you should seriously question whether you should be programming.

  • TS1363 apple sign shows up and then turns off after a few seconds, and i can not connect to my itunes

    apple sign shows up and then turns off after a few seconds, and i can not connect to my itunes

    I have the exact same problem trying to use the Remote app on both my iPhone 3gs and iPad 2 with either my Mac or ATV2.  My Remote app used to work on my phone - I can't recall if I ever actually used it with my iPad, but when I tried today, I got all the same results as you did (on both iPad, and then iPhone).  I  was using my ATV2 to play music from iTunes on my Mac and wanted to use the Remote app, but it would not connect to either device no matter what I did. 

Maybe you are looking for

  • How to stop importing from usb drive going into root ITMS directory

    First time I imported, everything was fine. I was trying to get rid of some duplicates and got rid of one of the main subdirectories (I had "Itunes Music" folder with two main subdirectories, let's call them "Laptop" and "Desktop." I noticed I had ma

  • Outbound Delivery without Manufacturing date

    Hi Guys, I have activated SLED in Article master.(We are using SAP IS Retail, ECC 6.00) At the time of GRN, users have entered manufacturing date to check remaining shelf life for an article. I have made following customization (using transaction cod

  • Why Avengers Initiative game fails to load on my iPAD 2

    Hello, I bought the full version of Avengers Initiative game for my iPAD 2 running iOS 6.1.3. After few seconds of loading the game quits with no error messages, it siply quits! There is enough space and I tried restarting, same issue. Thanks for you

  • Very strange behaviour of SqlDataReader on wifi connection.

    Hi Experts, We are doing performance test on filling data from SQL to list using following link http://www.codeproject.com/Articles/14760/A-Custom-Business-Objects-Helper-Class ( reflection) with static class filling using sqldatareader as data provi

  • Anyone know why this program aint working

    i pretty much copied most of the code from an example program but this one doesnt seem to be working the error says i need another } but keeps saying the same thing when i add one import java.io.*; //this is a cprogram i have created so the users dat