After 18181 update - wireless problems

After I applied the 18181 update today, airport will connect to my router but will stop responding after about 10 minutes....reselect another router (there are several in my neighborhood) then it will again work for about 10 minutes until it stops. It will remain connected and appear to have no problem when running diagnostics, it just stops working on either Safari, Firefox, or Mail. It appears to be related to this update since the problems began immediately after the update was applied.

Hi,
I really like the changes done in the forum.
I also appreciate the efforts take by the SDN team to keep it up and reduce the downtimes.
But there are problems with this one as goes with any other thing.
As mention above,
I can stay with first one...
But the response time is really something to look forward. I can make a cup of coffeee after clicking on an event...
Kindly, do something for the same.
Regards,
Amit
Today response time is good...
Edited by: Amit Khare on Dec 18, 2007 10:07 AM

Similar Messages

Apple TV after recent update has problems with Hulu Fall 2014 shows

In specific, ONCE Season 4 from ABC. The shows play about 15-17 minutes, up to the 2nd commercial - which fails almost immediately, the screen goes black and nothing. (I did find that the SUBTITLES come through - of all things.) If you try and re-start the episode with RESUME PLAYING, you'll just stare at a blank screen for ever.
I have notified HULU of this issue with their content - other shows (like Agents of Shield) play fine, just not ONCE Season 4.
Obviously, something is broken and needs to be fixed.
**** Update **** The problem seems to be caused by the subtitles. Turning the sub-Titles off seems to work-around the problem.

i dont have an ipad but ive had problems also, streaming music from my itunes off my macbook to my appleTV so i after seeing all these itunes 11 problems, im starting to think its the new itunes cuz my airplay was working fine until i updated also.

Unable to restore after E61 update without problem

Hi there,
First post here but I read a lot...
As I was unable to connect on my home WLAN (a USR9106 DSL/modem/router) I decided to update my E61 to the latest firmware.
I had no problem with the backup nor the update... but now, when I try to restore, I get a "memory full: close some application and try again"
But as you can imagine, I have no open application ! (I also didn't forget to allow installation of non trusted application).
Thanks for your help... I'll be in big trouble if I cannot restore...
Tom
PS I backed up on a large SD cardMessage Edited by tompic on 26-Dec-2006
08:38 PM

I have the same problem now, did you find any solution?
Thanks

How to downgrade to ios 7.1.2. bcoz my high speed wifi acts like gprs on my 5S after ios8 update and problem remains same on ios8.0.2.

ios 8 wifi problem

aman_22 wrote:
reset setting = nothing happen
reset network setting = nothing happen
reset all = nothing happen.
now i think android is a gud option
Blur mode asked; did you reset the phone? None of those are a phone reset.
Turn your iOS device off and on (restart) and reset

Touch sensitivity problem after latest update iOS 6.1

Hi guys,
does anyone else have the same problem? After updating my iPhone 5 to latest version iOS 6.1, touch screen stared to work wierd. I have to slide a few times just to unlock my screen. Can not poroperly open any application and when I want to scrool, that's pain in the ***.
Can anyone help me about this? Is that problem with the update iOS 6.1 or my iPhone5, 3 motnhs old become broken?
Thanks in advance.

Hi. I have a 3 years old 3GS which i have updated whenever a new iOS was avaialble. This has been working with improvements besides the fact that the phone gradually is becomming slower with increased functions and especially from iOS 6.0 and up. It has however worked ok keeping in mind that it is a 3 years old phone. With the latest update to iOS 6.1, however, the use af the iphone has severely been affected, much like you other guys are experiencing. The below described behavior of the iphone has never happened before, until the faithfull morning of the 4th of februar, 2013 when i accepted to update the iOS to 6.1. Immediately after the update the problems started:
When sliding to unlock the phone it takes several attemps (sometimes 10 or more) before the slider actally follows my finger to the end and the iphone unlocks.
When typing (eg. a text msg. or email message), it is now allmost impossible to type a meaningfull message because some of the keys do not respond and other only respond to a very hard press. Only when typing very slowly, making sure the touchscreen is actually responding, a usefull message can be made. It seems like the sesitivity of the touchscreen has been altered making it less sensitive.
The same behaviour is observed for other functions and Apps like games which are now impossible to use due to the poor response of the touch screen.
Now i only wish i could roll back the iOS to an earlier version (like 5.1.1) where the iphone was really working well.
I really hope that a new and improved iOS will be out soon to correct for this problem

PC freezes,blue screen etc..after latest update

hello
looks like im not the only one with BIG problems after latest updates,my problems are..
1.Pc sees ipod in my computer but itunes wont start and pc locks up when i load itunes.
2.Start itunes without ipod connected itunes works fine but when i plug ipod in pc goes to blue screen and crashes.
3.If i restart pc with ipod still plugged in pc fails to boot after p.o.s.t. just a blank screen.
3.Ipod shows 2000 tracks itunes shows 1500?
4.I had a fwe problems before latest update but now cannot do anything with either.
Should i reset ipod to factory settings, delete itunes and load from cd when i bought ipod or is there an easier option?

Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors. Then re-install the OS.
OS X Recovery
OS X Recovery (2)

Still getting GPU Crashes after Graphics Update 1.0 MBP 2010

Hi all,
I am very disappointed after updating my computer to the latest Graphics Update. I have been recieving the problem less frequently before the update but now it's happening often.
27/10/11 1:55:32.000 PM          kernel          NVDANV50HAL loaded and registered.
27/10/11 5:18:36.000 PM          kernel          NVDA(OpenGL): Channel exception! exception type = 0x6 = Fifo: Parse Error
27/10/11 5:18:36.000 PM          kernel          NVDA(OpenGL): Channel exception! exception type = 0x6 = Fifo: Parse Error
27/10/11 5:18:36.000 PM          kernel          NVDA(OpenGL): Channel exception! exception type = 0x6 = Fifo: Parse Error
This is a error relating to the GPU retrieved from console. I recieved the black screen bug after waking my computer up from sleep (closing it after the bug wont sleep), then hard powered-off the computer. After a while, I turned the computer back on only to realise that the computer froze at the login screen (the mouse moves and sound will change, brightness controls show, but does not physically change), with the exact same error code from console but a different time.
27/10/11 5:20:41.000 PM          kernel          NVDANV50HAL loaded and registered.
27/10/11 5:21:18.000 PM          kernel          NVDA(OpenGL): Channel exception! exception type = 0x6 = Fifo: Parse Error
27/10/11 5:21:18.000 PM          kernel          NVDA(OpenGL): Channel exception! exception type = 0x6 = Fifo: Parse Error
27/10/11 5:21:18.000 PM          kernel          NVDA(OpenGL): Channel exception! exception type = 0x6 = Fifo: Parse Error
27/10/11 5:21:18.000 PM          kernel          NVDA(OpenGL): Channel exception! exception type = 0x6 = Fifo: Parse Error
27/10/11 5:21:18.000 PM          kernel          NVDA(OpenGL): Channel exception! exception type = 0x6 = Fifo: Parse Error
I have a MacBook Pro 10.7.2, ALL updates except for Aperture and iPhoto (cbf).
What do I have to do now, other than returning computer to Apple Store (that will be my option if no solutions can be made)?

My computer freezes totally randomly, didn't find a solution till now, but I did discover ...
(1) When using an external monitor, can't wake up from sleep, I have to force shutdown . While after the update this problem has Gone. So dealing with external displays is no more the problem, sleep - wake up ,,, all ok.
(2) Before the MacBook Pro video update 1.0, I had no problems at all while using the internal display, Except the Log In screen Freez, and it was randomly, it could happen 3-4 times a month.
(3) After the Update, external display is perfect, but log in screen freez issue increased dramatically.
My Operation system was OS X lion 10.7.2 upgraded from 10.6.8., So I decided to do a Lion clean install.
* I wiped the drive, even made it a new one Partioin, installed 10.7, then 10.7.2 combo update. started to crash even without an external display, and I still didn't even install any applications, so I made the video update, and the computer started to act more crazy.
* Now I installed a new hard drive, with a clean 10.6.8 runnning, I'll test the hardware again, then upgrade to Lion, as I found that the upgrade from 10.6.8 to lion was less troubles, than the Lion clean install.
I hope its not a hardware issue concerning the Macbook Pro, I suspect the Harddrive, as I got a folder named :
( Lost+Found ), though the Lion Clean install on the new drive didn't solve the problem.
( HELP ) !!!
Sorry for the Long post, but I am stuck now, cause I was a mobileMe user, and I upgraded to iCloud, and I am back to 10.6.8 cause I can't deal with the unstability of 10.7.2 and iCloud !!!
MacBookPro 6,2; 15", Mid 2010 ; 2,4 GHz Intel Core i5; 8 GB 1067 MHz DDR3; NVIDIA GeForce GT 330M 256 MB - Mac OS X Lion 10.7.2
Any Suggestions please ...

I am having problems pairing a wireless keyboard to iPad2 after ios6 update.

I am having problems pairing our wireless keyboard to our iPad2 after ios6 update. I enter in the code and press enter on the keyboard and I get a unsuccessful pairing message. Please help!

Well if you said what your issues were then it might be easier to say if we're experiencing similar problems

Multiple Samsung Stratosphere problems after FF1 update

There have been multiple posts on various issues users have found after the recent Stratopshere FF1 update. Some were replys to older posts and some only touched on a single issue. I wanted to consolodate into one thread, and hopefully get teh attention of Verizon to maybe reply here.
For reference, a lot has been discuss here --> https://community.verizonwireless.com/message/874446
Summary: Verizon and Samsung have finally updated the Stratosphere almost 1 year after release. This updated the phone from Android 2.3.5 to Android 2.3.6. Going by filename, this is known as the FF1 update. This update went live at the end of August 2012, and most users were upgraded before mid September 2012.
There were some noticable changes in this update:
-Lock screen has changed. The puzzle piece and glass lock options have been removed. New options have been added, such as facial recognition unlock.
-Call answering screen has changed, introducing the option to ignore call with a message.
-Camera now has digital zoom ability.
-Ability to uninstall the 2 games the phone comes with (Need for Speed and Lets Golf)
-Phone icon has changed ever so slightly
-Wifi icon now included up and down arrows to indicate data is being sent or recieved
-Wallpaper no longer "stretches" over multiple screens - ie, it no longer scrolls as you move from screen to screen
-The visual voicemail app has been improved (I have personally not used this feature)
-Callback number is now supported in text / picture messages
-Android core OS updated from 2.3.5 to 2.3.6 (both versions are still Gingerbread)
-Update to how the device deals with the end of scrolling. It used to rubber-band bounce back, now it will just give a green bar and expand the bar as you scroll. (I cannot fault Samsung for this change as this was at teh core of an Apple lawsuit and has been changed in newer versions of Android.)
-(I am sure there are more. please list any others you may have noticed)
I have found some problems, and others have confirmed that this is (at least) somewhat widespread:
-The biggest problem is with wifi connectivity. Upon an initial connection to wifi, everything works great. After somewhere between 15minutes and 2 hours, problems start happening. Its as if the wifi keeps hanging or reconnecting. Download speeds (tested with the SpeedTest.com app) slow to about one third of normal. Apps like Facebook that require a constant connection will just time out.
-It appears the signal strength for 3g and 4g connections is lower. There are places where I used to get a 4g connection, and now I only get 3g. Some palces I fall back to just 2g digital.
Another minor issue i found was with text messages. When you reply to a message, it no longer automatically focuses the text in the input box. You have to first click into the box to start typing. Not a huge deal, but one more step to take over and over. Minor annoyence.
At my house, I struggle to get a 3g or 4g signal. I depend on wifi for my data connection. So with the wifi connection problem introduced by teh FF1 update, my phone is somewhat useless to me now while at home. Here are teh troubleshooting steps I have been through so far to attempt to fix the wifi problem:
-Complete factory reset on my phone. (did not help)
-Pull battery and SIM card out of phone for 15 minutes. (did not help)
-Went to a Verizon store. The guy at the store was helpful, and said he also had a Stratosphere and was getting the same wifi problems after the update. He said all he could do was to send me out a replacement phone. I got the replacement phone, and it had the same problems.
-I read in multiple palces that Android 2.3.6 has a bug within wifi and DHCP. Apparently if you have a DHCP lease set to "forever", the phone will keep requesting a new address. Setting the DHCP server on the router to something like 2 weeks, or using a static IP is supposed to solve this. I have a NetGear N900 router, and I can not change teh DHCP lease time. It appears, however, that my router is not sending out "forever" leases. But just to make sure, I gave my phone a static IP. (None of these steps made any difference).
The only thing that temporarily fixes the problem is a reboot of the phone. This will again give you anywhere from 15min to 2 hours of good wifi use before problems start happening.
I have now had this update for over a week, and on 2 phones. I still can't maintain a wifi connection for much longer than 15 minutes without problems starting up.
I am asking Verizon or Samsung to at least confirm this issue if possible. Maybe there are newer revs of the Stratopshere hardware that don't have this problem. Or there is something unique about my (and apparently others) situation. But it seems like Verizon's current stance is to offer a repalcement phone (as currently all Stratospheres are within their 1 year manufacture warranty as the phone has not been ouy for quite 1 year yet).
I am asking for a workaround for this problem, or a true fix adressed by a new software update, or at least allow us to roll back to the original Andorid 2.3.5 software.
I have had my original Stratosphere for almost a year with no wifi problems - then get the FF1 update and have had nothing but problems on 2 different phones.
Thank you for your time.

Thanks for starting a comprehensive thread on problems with this update. I want to add one more.
I have Bluetooth in my car (a 2004 model), and previously the phone has connected to it practically instantly when I start the car. Since the update, I have never been able to connect the phone to the car by Bluetooth. Several times the phone has made a standard notification sound at the moment it should be connecting to Bluetooth, though no notification appears. I have no idea what that could mean.The car's Bluetooth shows up as paired in the list of devices in Settings > Wireless & networks > Bluetooth settings. I haven't seen this widely reported as an update issue, but perhaps some others have experienced it too.
UPDATE: I finally did some testing, and found that the notification was to signal the extremely brief appearance of a dialog indicating that the car's Bluetooth was requesting a connection. Accepting that request let the phone connect with the car, and calls went to the car's sound system as they should. When I turned the car off and back on (just the electrical system; not wasting any gas on this!), the connection was established immediately, so apparently the acceptance only had to be done once. Nevertheless, it did have to be done, and the dialog notification disappears within seconds. I believe it would have been possible to go into Bluetooth settings and accept the connection request there if I missed the notification; but not seeing the notification, I might not know to do this.
One further observation: When I turned the phone's Bluetooth off and back on after a connection had been established, leaving the car on the whole time, the two did not reconnect. I believe that may be different from before the update, but I'm not really sure.
Message was updated by David Rensberger

Aluminum Wireless Keyboard not working properly after Firmware update 1.1

Hi,
Well, as the subject says, my keyboard is not working properly after I updated the firmware. The problem is that several keys (delete, down arrow, brackets and apostrophe) stopped working right after I installed the update. I never dropped it or hit it. And I did not stop or interrupt or did anything during the install. I take very good care of it.
I have already tried toubleshooting with the support page, restarting the iMac, taking off the batteries, setting it up with bluetooth again, going back a week with time machine and to reinstall the firmware. So, if you have something new for me to try, I will really apreciate it.
Thanks in advance.
Franco.

I have 24" iMac with the Apple wireless M&KB - I know this is basic but have you tried a fresh set of batteries? My KB will refuse to establish connection when batteries are on the weak side the firmware update may just be a co incidents. If your wireless mouse is working OK then I would guess the blue tooth is functioning.
Not sure about the 10.49 download - are your other file downloads completing properly? Are there any error messages?
Steve

Airport problems after latest update password

Yesterday I did a software update and airport was one of the updates listed. After the update neither my desktop or laptop would connect to the airport network. I used the airport utility to re set up the airport base station and was able to get my laptop working on the wireless network. My desktop, however, will not connect to the airport anymore. It keeps telling me the password is incorrect (the password is correct, I am using it to log in on my laptop). I notice on my laptop the security is WPA2 and on the desktop I only have the option of WEP. The desktop is running OS 10.4. Any ideas?
Thanks for your help

I was having major problems too. I ended up completely uninstalling itunes then downloaded it again from http://www.apple.com/itunes/. If you're using firefox, for some reason itunes will not download and I don't know if using googlechrome will also have problems,so just to be sure that it will work on your first try, use internet explorer when you download itunes. Good LUCK!!

Unable to connect to wireless network after software update

on updating the software on my Ipad 3 I am unable to connect to my office wireless network

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

My ipad2 wireless not working after the update to ios 6.1.3, what can I do?

Hi, My Ipad2 could not connect again with the wireless after updated to ios 6.1.3. Pls what can I do?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Event ID 1 for Intel Bluetooth Wireless High Speed after Windows Update

After the automatic update for Windows I received the following error message in the Event viewer, telling me that Intel Bluethooth Wireless High Speed has to be reinstalled after the update.
How do I reinstall Intel Bluethooth Wireless High Speed on my notebook?
Source: ApplicationExperienceInfrastructure
"Bei der Anwendung (Intel Bluethooth Wireless High Speed, von Lieferant Intel) sind folgende Probleme aufgetreten: Um eine einwandfreie Funktion zu gewhrleisten, muss Intel Bluethooth Wireless High Speed nach der Aktualisierung von Windows neu installiert werden."
+ System
- EventData
DBType 15
AppNameCount 36
AppName Intel Bluetooth Wireless High Speed
VendorNameCount 6
VendorName Intel
SummaryCount 149
Summary Um eine einwandfreie Funktion zu gewhrleisten, muss Intel Bluetooth Wireless High Speed nach der Aktualisierung von Windows neu installiert werden.
SessionID 0

Yeah, I tried it exactly as described.
I use the Satellite U940-11X (PSU6SE) which has as network adapters the Realtek PCIe FE Family Controler and the Intel Centrino Wireless Adapter N 2230. The OS platform is Windows 8, 64bit.
I first uninstalled the existing Intel Bluetooth driver, then the Intel ProSet Wireless software.
I downloaded the newest software from Intel's website which is:
- BT_2.6.1212_e64.exe, version 2.6.1212, 19-3-2013, for the Intel bluetooth software and
- Wireless_15.6.1_e64.exe, version 15.6.1, 19-3-2013, for the Intel PROSet/Wireless Software and Drivers
I have installed both software packages correctly and did not receive any error messages.
The installation seems to be faultless.
However, the bluetooth switch in PC settings (wireless tab) remains gray.
I cannot switch it from off to on.
In the device manager the bluetooth button is listed under hidden devices.
Where is the mistake?
Is it possible that my notebook requires specially modified drivers from the Toshiba website and/or additional drivers like to "bluetooth filter driver package" provided by Toshiba for my notebook model?
As to the bluetooth filter driver package it reads on the website that this driver is needed to enable bluetooth on your Atheros wlan-combo-card.
I am confused now because the notebook Satellite U940 11X (PSU6SE) doesn't have the Atheros card.
Any advice for me?
Thanks in advance
Rafu
Message was edited by: Rafu

Problems after Battery Update

After I installed the battery firmware update from the software update, the battery gets to about 50% and my computer just loses power. I hit the button on the battery and 3 out of 5 lights light up. When i try to boot i get the gray screen and soon after it loses power again. Before the update i was getting a good 2+ hours of work, now it is down to an hour.
If its some thing i cant fix myself, I dont have an apple care plan, so will this cost me?

Same Exact Problem Here. After the Update, my battery barely lasts an Hour...
My batter got b/w 2 to 2.5 hours prior to the update...
It's unreal...
I love my MBP, but when I first got in August of Last Year, the problem was Airport didn't work well and had horrible connectivity to wireless networks;
Then, they finally fixed that problem months later. Now, it's The batter...
I really do think that apple products, are, in general, better than much of the competition; but I really do wish they they would work out more kinks (R & D) prior to putting products out there...
I do have applecare, but dealing with applecare is like dealing w/ the BUSH Administration; it's all about deniability...
BTW, I don't know if you read about it; But, supposedly the warranty on ALL MBP Batteries was extended for an additional year beyond the factory warranty of a year, so you should still be covered if you have a MBP that was manufactured last year...
Good Luck,
David

After 18181 update - wireless problems

Similar Messages

Maybe you are looking for