After 2,1 update cannot call from 3G

The long waited 2.1 is good for nothing, contrary is worst than before:
- I try to call from my contact, start dialing and in a second call end. On E work fine.
- Contact still lagging
- Reception and voice quality same bag quality.
And probably more issues will surface.
How can I downgrade to 2.0.
Very disappointed.
Now the rumor is a reality: THE PROCESSOR IS NOT CAPABLE TO HANDLE THE PHONE.
A RECALL IS IMMINENT.

I thought I was having the same problem but I think it's a problem with the speaker in the earpiece.
If I make a call with the speaker phone, everything is good. I also notice when I adjust the volume it says "ringer (headphones)". Am I missing something?
Message was edited by: lore1701

Similar Messages

I can call from Branch through Gatekeeper to CUCM. But cannot call from CUCM through Gatekeeper to any Branche.

Hello All,
I can Call from any Branch office to CUCM through Gatekeeper. But I cannot call from CUCM through Gatekeeper to any Branch.
My CUCM version is 9.1.2
Regards
Bahlul

Do you see anything shw up on the debugs on the branch router?
Check debug h225 asn1 to see if there is a setup coming from the CUCM. If not, that means the CUCM is not receiving the IP address of the branch gateway from the GK. This could mean a config issue on the GK with respect to the branch gateways, or on the UCM.
Take debug gatekeeper main 10 from the gatekeeper. These debugs will show what's happening on the GK while processing the incoming ARQ from CUCM.
Also please upload the config of the GK, branch gateway here.
Hantale
Sree

E65 - cannot call from address book

I'm mostly happy with my E65 (ie, no random reboots), but I'm having a problem that no one else seems to have complained about:
Sometimes, generally when the battery is at about half full or less, I cannot call people from the address book. Clicking the 'send' button (the green one) or going "options->call->voice call" will do nothing.
Rebooting fixes this, but sometimes not for long.
Has anyone else suffered from this?
btw, how do I check what version of the firmware I have?

Hi.
I have the same problem with the e65 (my phone uses the same firmware version as yours). I bought this phone in India from a Nokia Priority Dealer, and neither they nor Nokia customer support were of any help (except advising me to turn in the phone to the service center for a week for testing). Used to happen about once a day, without any observable pattern leading upto it.
After a few resets and reinstalls, I think I've stumbled upon a partial solution. I had initially installed all apps to the memory card and now I have them installed onto phone memory. The data - images, ebooks, music - is still on the memory card. However, this problem isn't caused by a bad memory card - I've faced this with the Nokia supplied 256MB memory card as well as with a Transcend 2GB memory card.
I did this about a month ago, and the phone has only had this problem once since then. You might want to try this. Please let us know if it worked for you too.
Good luck,
Saurabh.

I cannot call from PC Suite

I have problems with PC Suite,
I cannot call or receive calls from program PC Suite. Somebody knows if this option is compatible with the N96?
Tks

Make sure you've followed the instructions in this support article. Note that both iCloud and FaceTime on the Mac must be signed in to the same Apple ID; those are two separate steps. Also note that the Mac and the phone must be connected to the same Wi-Fi network. Ethernet won't work. Trying to pair the phone to the Mac as a Bluetooth device won't work either.
If cellular calling still doesn't work, sign out of iCloud and FaceTime and sign back in. You may have to do the same on the phone.

After latest updates cannot stream from iPad to AppleTV

After latest updates on my New Ipad and Apple TV 2nd Generation, Canot stream video from the iPad to Apple TV.
I Can Stream from my iMac and from MacBook Pro, but not from iPad.
Any Advise?
Thanks.

Hey guys, unfortunately I've had to re-install Mountain Lion to get rid of the issue, but here's my experiences after trying many things and contacting AppleCare...
First, I had Lion and had upgraded to ML. They had me go do the following with limited success:
1) Reset PRAM (no effect)
2) Recovery Disk and repair permissions (no effect)
3) Went to system /Library and User /Library and basically we went through several attempts at removing various files from (/Library/InputMethods, /Library/LaunchAgents, /Library/LaunchDaemons") Once I had essentially removed every file and dragged it into the trash (without deleting), the issue was resolved. So, it seems to point to an application that was not fully supported or giving problems within the ML environment. The plan was to drag them one by one back and do reboot/shutdown until I could isolate the application, but rather than do that, I just did a fresh install to take out any variable that could be present from having to do a Lion/ML upgrade. I was able to put a fresh copy of ML on the computer through the Recovery partition after establishing connection to my router. Everything is working fine now.
Anyway, hope that helps some of you. It was a frustrating experience but seems to point to application issues wih the OS and not the OS itself. I think developers are still rushing to catch up with full ML support and so you might find yourself having many new updates in drivers or applications over the next month.

Yahoo is in menupage after update, cannot remove from firefox, is not appearing in control panel so cannot remove there, worried may be malicious

When trying to look at temp file on usb, downloaded file viewer, yahoo was installed as homepage and is now appearing in toolbar and menu bar. Can remove it from toolbar but will not go from menubar. It is not appearing in the control panel. Uninstalled all programmes that were downloaded today to see if did anything but has not had effect. Worried that this is affecting laptop.

You don't want to update to 3.6.4, trust me. Stay with 3.6.3. If you need to download it again you can find it here:
http://releases.mozilla.org/pub/mozilla.org/firefox/releases/3.6.3/win32/en-US/

After IOS 8 update, cannot install or update app

As my subject mentioned, after the ios 8 update, i cannot install or update app. I have done everything like calling the tech support, follow their instructions etc.. Some of the things i had done were
Soft reset ipad
Hard reset ipad
logout of itune store and login
delete everything on ipad and restore from itunes.
All these doesn't work and the problem keeps coming back again. This is frustrating that Apple would release an update like this that would break my ipad air. On top of that, quite a lot of app are not working eg zinio, evernote. My ipad air has been in this mode eversince the update release and i had mostly given up to resolve it. For all other ipad owners, if you want to avoid this anguish don't update to ios 8.

You are not alone. Here's one thread
Why can't I download or update apps on iPad running iOS 8
If you have the WSJ app installed, delete it and see if that fixes things. It immediately fixed it for me, but not for all people with the problem.

After iOS 8 update, recent calls are no longer appearing and a count of -1 is showing in the phone app

After i updated to iOS8 , suddenly no call log is available in the phone app under recents.
Yet a number in red -1 appears on top of the recents section.
is this is a bug in the OS? how can it be solved?

If you have not set up iCloud backup or backed up using iTunes, all data on the phone was lost once it entered recovery mode.
Your only option is to restore it and start new.
~Lyssa

[SOLVED] After pacman glibc update, cannot find command bash?

A few days ago I ran into a problem after running pacman -Syu that ended up with an unbootable system. I found this topic that ultimately solved the kernel panic-
https://bbs.archlinux.org/viewtopic.php … 1#p1127251
All that was needed was a symlink "/lib" to point to "/usr/lib"
My system now almost boots but luckily I can now get a to a shell (zsh). The problem is that I can not run bash, and various other tools- including my desktop environment and pacman.
I have checked my $path, and have verified that I have the binary file "/usr/bin/bash" and a symlink in /bin/bash to point to that binary file, which does exist...
% ls -l /bin/bash
lrwxrwxrwx 1 root root 13 May 24 23:43 /bin/bash -> /usr/bin/bash
% ls -l /usr/bin/bash
-rwxr-xr-x 1 root root 738008 Mar 13 00:47 /usr/bin/bash
But when I try to start a bash shell or run a script
% bash
zsh: command not found: bash
% pacman
zsh: command not found: pacman
% /usr/bin/bash
zsh: no such file or directory /usr/bin/bash
% cat test.sh
#!/bin/bash
echo "Hello World"
% ./test.sh
zsh: ./test.sh: bad interpreter: /bin/bash: no such file or directory
I hope i was thorough enough in providing information about my system, but please let me know if there's anything else I left out that may be able to help.
Thanks so much!
[SOLVED]- Ended up mounting my system from a live install cd, and copying over each bash binary in my system with the live media's binary.
Last edited by OrangeCrush (2013-05-25 06:38:43)

If it has only been a few months, that thread should have nothing to do with what you are experiencing. That problem stemmed from when the filesystem was actually changed from having /lib as an actual directory to /lib as a symlink to /usr/lib. Oh the problems that caused. For me it went perfectly smooth... well I did have to search for and rid /lib of extraneous unowned files, but it was smooth after that.
You say though that you did not have a /lib symlink when you checked, and then you created it? This is odd, as that is part of the filesystem package and therefore a tracked file. Maybe you should start by reinstalling the filesystem package just to make sure that the necessary components of the filesystem are all in order before proceeeding.
BTW, you should really update more often than every "few months" as that is what using a rolling release is all about. Also if you don't update very often still, never update the database (-Sy) without also updating the system (-Syu) as this will lead to partial upgrades, which can severly break your system. So never do "pacman -Sy <package>" as that is the equivalent of doing just a "pacman -Sy" and then continuing on your merry way. Big changes are in the air right now around these parts, so keeping your system up to date is probably going to be crucial in making subsequent updates as pain free as possible (we are heading towards the final /bin -> /usr/bin move!).

HT4356 After the latest update cannot print to my hp photos art 5510 help please

Updated to latest iOS 6.1.2 now just cannot print to hp photosmart 5510 this was working fine until now have tried switching ipad off ,also tried turning off printer tried switching router off just sits with item in printing queue even though it finds the printer,help please

You may have a print job stuck in the AirPrint cue of the iOS device, or the printer's firmware may be out of date. Do a firmware update first. You will find the directions linked below. If that doesn't work, clearing the cue should correct the problem. Double-tap the button on the front of your iOS device. This will bring up a menu along the bottom of the screen that displays all running apps. One of the apps should be Print Center, and it should have a number next to it. That is the number of print jobs you have in the cue. Touch the Print Center icon and a window will come up displaying the print cue. You will only be able to cancel one print job at a time, so make sure to cancel the last job you sent first, or every print job that was sent after the first one may print. Once the cue is clear, try using AirPrint again. Let me know what happens.
Getting the Latest Firmware and Product Updates
I am a printer tech for HP.

After 10.6 update, cannot connect to remote speakers

After I updated itunes on my windows 7 (64 bit) machine to version 10.6.1.7, itunes does not show my remote speakers connected through an airport express. My windows XP machine with itunes version 10.5.3.3 does show my remote speakers and can stream music to them through the airport express. Both machines are on the same network behined the same firewall. Furthermore all other "i" products in the house can stream through the airport express to the remote speakers (2 iphones & 2 ipads). Nothing has changes except for the Win 7 itunes upgrade to 10.6.1.7. Is there a way to roll back the itunes upgrade? Or is there a fix for 10.6.1.7?

Ok, I've just done that. An error message came up, with half an email address so I changed the year date back and opened passbook.. Then it asked to connect to iTunes, it didn't display the "cannot connect.." message, just showed loading and the wheel going around for ages. Regretting this update, so much hassle. Thank you for your help so far though. Seems like so many people are having the same problems :(

After latest security update cannot access my wired network

After the latest security update on my MBP.... no longer can access wired network on laptop. Desktop did not update.... can still access wired network.
Anyone have a fix for the updated MBP?
Thank,
Reed

Is it all applications that these keys don't work?
Also is it a wired keyboard or bluetooth keyboard, either keyboard i'd suggest starting with resetting SMC (helps USB) and PRAM (helps Bluetooth)
Reset SMC
Intel-based Macs: Resetting the System Management Controller (SMC)
Reset PRAM
Resetting your Mac's PRAM and NVRAM
If it's a USB keyboard i'd suggest trying a different USB port and restarting the computer, for a bluetooth keyboard i'd suggest removing the keyboard from Bluetooth Preferences and repairing the keyboard.

After installing latest update cannot access "messenger options" under the options tab

After installing Firefox latest update I cannot access "messenger options" under the options tab. The other tabs, themes and mail options work when clicked but nothing happens when I click "messenger options" It works fine in IE.

When I go to the settings page to access iCloud and click on terms and conditions it gives the message

Blackberry Curve - Cannot call from phonebook

Hi,
I have a Blackberry Curve which connects to my Outlook Contact list. However, I am unable to call directly from my phone book when there is a (0) in brackets as it tells me it's "disconnected" or "wrong number"
Annoyingly, Outlook seems to insert the (0) automatically so everytrime i call i have to edit the number before dialling.
Can anyone help me fix this please.
Thanks,
Steph

Hi and Welcome to the Community!
Given what you describe, you need to contact your mobile service provider for formal support...it is their voice network that your BB is not connecting to, and they need to help you ("behind the scenes") to diagnose what is going on.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

After latest security update, cannot type capital "s" nor "w" using right shift key. Left one works fine...

I'm running Snow Leopard with the last week's update...
I see now cannot type several characters using the right shift key..
I tried to reboot - bad habit from windows era still no improvement...
how can I rollback to previous version of software?
or/ is there a solution to this problem

Is it all applications that these keys don't work?
Also is it a wired keyboard or bluetooth keyboard, either keyboard i'd suggest starting with resetting SMC (helps USB) and PRAM (helps Bluetooth)
Reset SMC
Intel-based Macs: Resetting the System Management Controller (SMC)
Reset PRAM
Resetting your Mac's PRAM and NVRAM
If it's a USB keyboard i'd suggest trying a different USB port and restarting the computer, for a bluetooth keyboard i'd suggest removing the keyboard from Bluetooth Preferences and repairing the keyboard.

After 2,1 update cannot call from 3G

Similar Messages

Maybe you are looking for