After 2 submissions Compressor suddenly stops working

After 2 submissions, about an hour later when I submitted another sequence from FCP, nothing happened. Though it's weird. There's no little window showing the frames counting up, but the ball is spinning over FCP. But I can work in Compressor. That shouldn't happen if things are right, should it?
The only difference is I added Chapter Markers. Is this another one of those 'known problems' with FCS 2?

Choose "Reset Background Processing" from the Compressor menu. Then restart your machine. Go back to FCP and resend that job. It sounds like either the Compressor processor or QMaster (or both) stopped responding.
Also, you may have a piece of media in your FCP timeline that QT doesn't like. You can work around this by exporting a QT reference movie form FCP (File > Export > QuickTime Movie) and then take that into Compressor as the source media.
BG

Similar Messages

My iphone 4 was updated 2 months ago, after updated the safari suddenly stopped working.I open the safari and it stops immediately. i cannot download anything or access any website through Safari. What shall i do to resolve this issue?

My iphone 4 was updated 2 months ago, after updated the safari suddenly stopped working.I open the safari and it stops immediately. i cannot download anything or access any website through Safari. What shall i do to resolve this issue?

Yes but there's no point doing it here. As the Terms of Use make quite clear this is a User to User forum. It's Users like you talking to other Users. It's not a channel to communicate with Apple.
Regards
TD

Hi. My photoshop elements 12 has suddenly stopped working. When i tried opening it yesterday absolutely nothing happened. After a reinstallation I got to choose between opening picture browser or photoshop elements and when trying to open elements nothing

Hi. My photoshop elements 12 has suddenly stopped working. When i tried opening it yesterday absolutely nothing happened. After a reinstallation I got to choose between opening picture browser or photoshop elements and when trying to open elements nothing happens. Now I have reinstalled windows but still with the same result. I was using the program for several months without problem until yesterday when it suddenly stopped working. Any suggestions on what to do?

same question with PS11

GPRS services suddenly stop working after some time abt 4 hrs.Airplane on off solves it

I am using a factory unlocked iPhone 4 GSM in India. Iam currently using it on airtel network 2G services i.e GPRS services. Now the problem I have noticed is that the GPRS services suddenly stop working after some time say about 4 hours. Then what i do is to turn airplane mode on and then off or restart the phone and GPRS starts working. Agan after some time I have to repeat this exercise. Please help soon. This is happening since the time i bought this phone i.e from past 20 days. I have tried allpossible network settings and resetting network but nothing helped. everything else is working perfect.

Hi Syed,
I have also started facing the exact same problem since the past few months with my docomo service.
Earlier, EDGE / GPRS used to work just fine from my workplace where the network was good.
But recently, I got my iphone replaced, due to a network problem, from an apple store in indianapolis, and also upgraded to ios 5.....so not sure now whether this intermittent EDGE / GPRS outage is due to the new hardware or the new OS.
Did you upgrade to iOS 5 and did it help?
PS: iOS 5.0.1 also doesn't seem to be helping, I still need to restart the phone to get EDGE / GPRSt to work.....will try out the airplane mode thing....at least that shouldn't take as much time as a full reboot.
Regards,
Hemant

My iphone 5 camera suddenly stop working and the shutter dont open after some minutes shutter open with some dolor stripes and it takes 2 or 3 days and again start working normaly it happens every 3 weeks.is this a soft ware problem??

my iphone 5 camera suddenly stop working and the shutter dont open after some minutes shutter open with some dolor stripes and it takes 2 or 3 days and again start working normaly it happens every 3 weeks.is this a soft ware problem??

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

HT4623 My iPhone has suddenly stopped working. It now says the battery is dying and to charge it. After charging it for over an hour, there is no change. The power won't come on, and I am left with a blank screen advising me to plug my phone into the char

My iPhone has suddenly stopped working. It now says the battery is dying and to charge it. After charging it for over an hour, there is no change. The power won't come on, and I am left with a blank screen advising me to plug my phone into the charger.

Try different USB Cable, try different Charger. Clean iPhone charging port with clean dry toothbrush. If still problem and you have Warranty or AppleCare, make Genius reservation and take iPhone to Apple for resolution. If no coverage, most likely it could be battery or charging port assembly that need replacement.

My bluetooth suddenly stopped working soon after I upgraded to OS 10.9.4. I rebooted SMC, didn't work. Any other ideas?

My bluetooth suddenly stopped working soon after I upgraded to OS 10.9.4. I rebooted SMC, didn't work. Any other ideas? Don't know if it's related to the upgrade. I see other complaints about bluetooth in the thread but none of the solutions offered there have worked for me.

Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. You may have to leave the machine there for several days.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed.

Help my Ipod suddenly stopped working 2 min after unplug from car......

Help my Ipod suddenly stopped working 2 min after unplugging it from my scion pioneer ipod ready radio. I am not sure what happened; it was working fine and charged sufficiently and i walked into the gym and tried to turn it on, and no life. I tried plugging it back into my car and it says "i-pod read error". I then tried to plug it into my computer and it doesnt even read it. I may have unplugged it when it said do not disconnect; i am not sure though.Any suggestions? thanks!
Windows XP

I'd say your "Scion Pioneer" radio fried your Mini; could have been a power surge, or could be a bug.
You might want to go the "aux jack" route next time.

Outlook to iPhone sync failure – Sync suddenly stopped working for calendar events but continued for contacts and notes.   Finally Fixed!!! SUPPORT TEAM – PLEASE SEE THIS – Complete explanation of cause and correction steps.

The issue: Outlook to iPhone sync failure – Sync suddenly stopped working for calendar events but continued for contacts and notes.   Finally Fixed!!!
SUPPORT TEAM – PLEASE SEE THIS – Complete explanation of cause and correction steps.
The cause: It is now clear what caused this problem. For years I had several “all-day” events in my Outlook calendar (birthdays, anniversaries, etc.). In May 2012 I decided to make some of them one hour events so I could add alerts to remind me of the event. I did this by dragging them in Outlook to the time I wanted and expanding them to the time slot desired and then adding the alarm.
The symptom: Syncing stopped working for the calendar but continued working for contacts and notes. I didn’t realize sync was failing until months later when I missed two very important phone calls, so when I noticed it the cause was not obvious.
The failed attempts: I’m head of a software firm and my calendar sync is a crucial to my business life so I took this on with a vengeance. From a quick look at events in Outlook and the iPhone I could see that the problem started in May 2012. Events before May were in both Outlook and the iPhone but events after May were only one or the other. Unfortunately I had changed several other things at the same time relating to other events so again the cause was not obvious. MANY calls with AppleCare proved them incompetent so my internal IT guys assisted trying many things. We tried a huge number of calendar changes and several versions of iTunes, iPhone OS and Office as well as both iPhone 4 and 5, all without success.
The fix: After 18 months of frustration, MANY hundreds of $ expense and MANY hours of wasted time I saw a blog that had a calendar sync problem and it indicated all day events were related. I changed the display of the Outlook calendar to the list view, added columns so I could see “all day” event check marks as well as times of events, sorted on the “all day” event column to move them to the top, and for all events that were “all day” events AND had a start and end time, I removed recurrence and then added the annual recurrence back…
After I fixed all events that had BOTH “all day” set and had a start/end time, I tried another sync. It synced for the first time in 18 months!
Problem occurred May 2012 – fixed Nov 2013

Hi, to remove dummy '_ModGrp' entries, rather than crashing the 'Suppr' key on your keyboard, you can use this basic VBA macro (launched for instance from Excel).
It will recursively remove all '_ModGrp...' folders
Sub RemoveFolders_Click()
    Dim oOutlook As Outlook.Application
    Set oOutlook = New Outlook.Application
    Set objNameSpace = oOutlook.GetNamespace("MAPI")
    Call CleanFolders(objNameSpace.Folders)
End Sub
Sub CleanFolders(objFolders As Outlook.Folders)
    For i = objFolders.Count To 1 Step -1
        If Left(objFolders(i).Name, 7) = "_ModGrp" Then
            objFolders.Remove( i )
        Else
            If Not objFolders(i).Folders Is Nothing Then
                Call CleanFolders(objFolders(i).Folders)
            End If
        End If
    Next i
End Sub

HT201263 My iPod touch suddenly stopped working. It was fine, but when I went back the screen had gone black and I was unable to turn it on. It is now unresponsive and my computer does not recognize it when it is plugged in. What should I do?

My iPod touch suddenly stopped working. It was fine earlier, but when I went back a few hours later, the screen had gone black and I was unable to turn it on. It is now unresponsive and my computer does not recognize it when it is plugged in. I thought it just needed to be charged but there seems to be a larger issue now. What should I do?

Let your ipod die. Then when it is dead charge it adn turn it back on. After that it should be fine.

Satellite L300 - Built In webcam suddenly stopped working

Hello,
I have a Toshiba Satellite L300 with a built in 2.0 USB camera and a windows 7 operating system, the camera suddenly stopped working since about 2-3 weeks ago with unknown reason!
I already tried system restore, un-installing and re-installing the camera driver, preformed a full scan by kaspersky internet antivirus 2012 (up to date), and I also ran a complete system and drivers troubleshooting ... and the problem still exists ...
When I use the windows live movie maker it gives me an error saying: cant record audio or video from the selected device. Make sure that the device you're trying to use is installed properly and not currently in use by another program.
The microphone works well on skype but the camera doesn't open!
Please tell me how to fix it, what am I missing?

> webcam appears in the device manager
Is it marked with an yellow exclamation mark?
Usually if the webcam software has been installed, you should be able to start this software going to:
All Programs -> Toshiba
There you should find the webcam software check if you can use and control the webcam after this software has been started normally the webcam control bar should pop up if you would move the mouse cursor above the upper display area PS: the bar can be moved to other area too; left right or bottom

I have been using my apple tv to access netflix for several months. It suddenly stopped working. When I try to go to netflix from the menu, it says "accessing netflix" but never does. I can access you tube just fine, but just can't get to netflix.

I have been using my apple tv to access netflix for several months. It suddenly stopped working. When I try to go to netflix from the menu, it says "accessing netflix" but never does. I can access you tube just fine, but just can't get to netflix. Any ideas. I have unplugged everything and waited but nothing helped.

Update software. If that doesn't work try resetting. Mine started working after the update.

I just brought my MacPro in for service and they replaced my hard drive. However, now my disc drive has suddenly stopped working! Is there anything I can do to fix this without having to take it back in for service, again!?

The nearest service center is 2 hours from my house and my computer isn't under warranty anymore, so I need alternative options. I'm just frustrated that my disc drive was totally fine until AFTER I took it in for service. I just paid a lot of money for a new hard drive from the apple store and now my disc drive has suddenly stopped working correctly. I tried with multiple CD's and DVD's...loading a disc, but my computer would just make a weird loading noise and then eject the discs. Now it has started fighting taking the disc, so I have stopped trying. Is there anyway to fix this problem without taking it in for service again and paying another boat load of money?
Thanks in advance for your help!

ShelbyMackenzieLynne,
when you say that your disc drive is damaged, do you mean your MacBook Pro’s hard disk drive, or do you mean its SuperDrive (the CD/DVD drive)?
When you’d updated your MacBook Pro to Mavericks, did the installation succeed, and subsequently freeze up? Or did it freeze up during the Mavericks installation?
Which version of OS X was installed on your MacBook Pro before you’d installed Mavericks?
Are you currently able to boot into the Mavericks recovery partition? To see if you can do so, hold down a Command key and the R key while starting up your MacBook Pro.

Acrobat x Pro 10.1.3 suddenly stopped working

Today Acrobat suddenly stopped working insofar as it just would not start. Looking in the task manager shows it starts then stops.
This is on a Win 7 x64.

Found this by an Adobe Staff Member if this other post http://forums.adobe.com/message/4507225#4507225 and it seems to work.
Amrita Chakrabarti,
Jun 20, 2012 7:23 AM in reply to bh241
Report
For all the users who have faced a problem where Acrobat did not launch after 30 days of serializing with a suite serial number, please execute the following workaround:
Make sure you are connected to the internet.
Launch a regular CS6 product other than Acrobat or Flash Builder (for example: Photoshop, After Effects, Premier Pro, InDesign, Flash Professional, Illustrator, Dreamweaver.)
Click on Help->Deactivate .
Deactivate the application. Quit application.
Launch a regular CS6 product other than Acrobat or Flash Builder (for example: Photoshop, After Effects, Premier Pro, InDesign, Flash Professional, Illustrator, Dreamweaver.)
Accept Eula.
Register trial by signing in. Let the app launch.
Quit and relaunch the app. Wait for UI to come.
Click on License This Software button on the UI.
Click on Sign in .
Serial number screen will come
Enter the serial number in the serial number screen and click Next.
Quit app and relaunch the app while connected on the internet .
After this if you launch Acrobat it will launch and run forever without trouble. In case you still face a problem , try relaunching the other CS6 app once more and then launch Acrobat.
Feel free to send me a private message if you need any more help with this.

My 12 year old Canoscan 8800f has suddenly stopped working.

My 12 year old Canoscan 8800f has suddenly stopped working. When I press the power button a light comes on inside, but after a bit of whiring it goes out and the scanner switches off. Is there a solution or should I buy a new scanner?
Solved!
Go to Solution.

I would still get a new one. They aren't too expensive and they have added a lot of features such as LED bulbs and instant on.
EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
Photoshop CS6, ACR 9, Lightroom 6

After 2 submissions Compressor suddenly stops working

Similar Messages

Maybe you are looking for