After 3.0.1, ringer & key clicks stop working! HELP!

After upgrading my 3GS yesterday, my ringer, key clicks, calendar alerts, just stopped working. I've to reset the phone but they still don't working. Vibrate feature still works when I turn down volume of ringer. Any help is appreciated. Thanks.

Hello All,
I wish to nominate myself for the "Idiot of the Day" award. I just called Apple tech support and as it turns out, some time after my upgrade yesterday, I managed to turn off all sounds with the switch that is right above the volume control. Yes, I am an idiot. But the day is young, let's see if anyone else can top this.

Similar Messages

After downloading iTunes 7.0.2 its stopped working Help!!

I downloaded the upgrade as usual but then when i went to open iTunes it said i needed to reinstalled iTunes. I did using my cd that came with my ipod nano (which i got this year in march) but it then came up with an error message saying that the Library.itl is newer than the iTunes i had installed. So i followed some advice i found on this site and deleted the file but now it comes up with:
'The instruction at "0x00559e29" referenced memory at "0x00000000". The memory could not be "read"'.
also my quiktime player isn't working either it comes up with:
Runtime Error!
This application has requested the Runtime to terminate in an unusual way. Please contact the application's support team for more information.
i thought i should stop playing around with it and seek professional advice before i do more damge any would much appreciated!!
Thanks

kia ora, Lost.
the QuickTime problem is probably causing the iTunes problem. (iTunes needs a properfully functioning QuickTime in order to work correctly.)
if WAWolf's suggestion doesn't help, let's try swapping out your QuickTime again (taking a few additional explicit precautions).
head into your Add/Remove programs. uninstall QuickTime.
Next, we’ll manually remove any leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
switch off antivirus and antispyware applications prior to the repair install.
go into Add/Remove and select itunes. click "Change" and then click "Repair".
if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?

My command z key just stopped working -HELP

Please help. I was working in InDesign CC and hit the Command z key. Everything froze. I had to restart and now command z doesn't work.

Just noticed my iMAC finder preferences are not working as well.
Does it sound like a MAC or Adobe issue?
I am not an IT person, just a simple designer. It takes me forever to get my preferences set. I have just started using my iMAC and Adobe CC since purchasing Dec. 2013. Looks like I should have stayed with good ole CS3.

Clicks stop working after opening iPhoto or App Store

Everything works fine until I open iPhoto or the App Store (could happen with other apps, but these two for sure) then "clicks" stop working, My cursor moves and some items highlight, but nothing will "click"... I can't select photos, can't click on Download button, can't click to All Events, etc. Tasks can be accomplished with keyboard shortcuts. In App Store, I can't even highlight to try to click. Once these apps are opened, mouse clicks no longer work in other apps.
I've tried switching from Magic Trackpad to a Logitech Nano mouse; same thing happens.
Using Mac Pro & Mavericks. Any ideas?
Thanks!

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a couple of minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; Pc () { o=`grep -v '^ *#' "$2"`; Pm "$1"; }; Pm () { [[ "$o" ]] && o=`sed '/^ *$/d; s/^ */ /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; o=`SP Hardware | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d; /[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]||0[^2]8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; for b in Thunderbolt USB; do o=`SP $b | sed -En '1d; /:$/{s/ *:$//;x;s/\n//p;}; /^ *V.* [0N].* /{s/ 0x.... //;s/[()]//g;s/$.*: $$.*$/ $\2$/;H;}; /Apple|SCSM/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); E=; for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia* || continue; ls | while read f; do [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && e=" *" || e=; awk -F_ '!/ag$/{$NF=a[split($NF,a,".")]; print $0 "'"$e"'"}' <<< "$f"; done | tail`; Pm "${D[$i]} diagnostics"; done; [[ "$o" =~ \*$ ]] && printf $'\n* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|last value [1-9]|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process \"$s\" with UID ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process \"$s\" with UID ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | grep -v com\.apple\.CSConfig | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/Star*; do M; done`; Pm "Startup items"; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail/B,P*P,Qu*T,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; [[ "$ID" =~ ^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID ]] || printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f | while read f; do file -b "$f" | grep -qw shared && ! codesign -v "$f" && echo $f; done`; Pm "Unsigned shared libraries"; o=`for e in DYLD_INSERT_LIBRARIES DYLD_LIBRARY_PATH; do launchctl getenv $e; done`; Pm "Environment"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter
exec bash
in the window and press return. You should then get a new line ending in a dollar sign.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know your password, or if you prefer not to enter it, just press return three times at the password prompt.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
8. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If it happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Left click stops working after sleep

Hi,
I have a MBA 2013 with a magic mouse that I use when at my office desk. If I close the lid or allow my MBA to go to sleep and then take it away from my desk to another office or room (beyond the distance of bluetooth), when I open my the lid my left-click stops working. Cursor can be moved and right click works but I can't left click anything.
If I then move back within the bluetooth range of the Magic Mouse I am also able to move the cursor and use right click, but again, the left click doesn't work on the Magic mouse either.
This is ridiculously frustrating as I regularly pick my laptop up and leave the office/house for meetings without first disconnecting my Magic Mouse cleanly (i.e. turning the mouse off whilst the MBA is in operation).
The ONLY solution to this issue when it happens is to reboot the MBA. This alone can take a couple of attempts as there is obviosuly no left-click so I have to manually CTRL-Q each app that stops me from rebooting (i.e. unsaved work, applications that sometimes need a force quit etc).
I have only noticed this issue since upgrading to Mavericks. I have tried different batteries in mouse etc, but I'm assuming that this is more of a software issue than a hardware one.
Any ideas?

Wish I could be more help but I don't have Mavericks to experiment with. I read a few comments by posting 'Mavericks and the Magic Mouse' into Google but there are so many references. And nothing positive as far as I can see. Hopefully we shall find someone else step in.

Mouse Clicks stop working randomly

So far I have noticed several times on my Quad Core 27 inch imac that the mouse clicks stop working. This is with two different mice, plugged in together, so I know it's not mouse or driver related. It happens to both of them whenever it does happen.
The only correlation I can make is that it usually happens when I am on a website. I might even have noticed a correlation with "flash based" modules and components on websites, but this could be speculation at this point.
Apple, I love you, but having to hard restart my $2000 computer because the mouse is inoperable is unacceptable. Figure this out. There is no excuse for this. PC's don't do this. I've never had a computer do this in my entire life and words cannot describe how frustrating it is, especially when you are in the middle of trying to get some work done...
-Matt

Try hitting the escape key on the keyboard (ESC). I've noticed that some property sheets, dialogs, and context menus can get 'lost' if you change focus to another program intentionally or accidentally, or if an application 'steals focus' (fairly rare in OS X). You may have to Command + Tab between applications to find where things are 'hung up'. Flash seems especially bad about hanging after a right click tries to call up a context menu.

[SOLVED] Thinkpad Fn keys suddenly stopped working

I'm on ThinkPad Edge 14. For some reason(s) unknown, my Fn keys stopped working after I restarted Arch a few hours ago.
I've checked the BIOS, everything is fine (no settings unchanged). I tried checking if X (I'm on Gnome 3) can still detect the keys using xev (as outlined here: https://wiki.archlinux.org/index.php/Ex … oard_Keys) and the Fn key is detected as "XF86WakeUp" witht the keycode "151", so at least nothing is wrong with the actual physical button.
What's more weird is that, I tried booting from another Hard Drive into Ubuntu, and the Fn key also didn't work (it has worked fine previously). What could be causing this?
EDIT: Even weirder, Fn keys aren't working in Windows as well (I dual boot). BIOS's still unchanged, and this started happening when I was working with Arch, so I'm quite sure this can be fixed through Arch. Problem is, I don't know where to start. How can Arch affect Ubuntu & Windows when I didn't change BIOS?
Last edited by splatterdash (2011-08-28 22:32:23)

I found out the problem!
I tried checking the Lenovo forums about the problem and found this: http://forums.lenovo.com/t5/ThinkPad-Ed … d-p/323077
Apparently, it's possible that the Fn keys suddenly stopped working for no clear reason. In my case, it happened when I was on Arch, so I thought the problem was with Arch. Anyway, I updated the BIOS from Lenovo's site and everything's working fine now.
Thanks!

Mouse Clicking Stops Working

Hi everyone,
Suddenly, for no discernible reason, mouse-clicking stops working. The cursor moves around on the screen, but clicking produces no results. This has happened multiple times [in Safari 3.0.4, iCal 3.0, iTunes 7.4.2; Photoshop CS2 (v 9.0.2)]. Restarting is the only solution I've found.
I use a Logitech wireless keyboard and mouse combo. Thinking the Logitech driver might be the culprit, I swapped in the original keyboard and mouse that came with the computer. Same results: at times, clicking the cursor does nothing.
Any ideas?

I experienced this issue as well.
The only patch I am aware of is the following:
- Press the OPTION key, 5 times in a row (this will trigger an option in the Universal Access pane of the System Preferences that allows you to use your keyboard as a mouse). You'll hear a sound warning.
- Press the OPTION key, 5 times in a row AGAIN to revert to the previous status.
Your mouse should now be able to click again.

My lenovo G505s shuts down suddenly and key board stops working at times

Hi,
I have bought this laptop 10 days ago, I am facing two problems 1st is, it shuts down(suddenly off not proper shut down) while working without showing any error message, and the problem no 2 is its key board stops working at times, system is working fine but all the buttons of key board are not responding. it will work when I restart the system.
please help what should I do, could it be replaced?

Welcome to the Lenovo Community !
Sorry to hear of your problems. I would suggest that you try a reset of the BIOS just to rule out any hardware conflicts the system may have. Try this........
1. Unplug the charger / adapter.
2. Remove the battery.
3. Press and hold the Power Button for 15 seconds.
4. Re-install the battery, plug in the charger / adapter if needed and power up the system to see if the problem was resolved.
If the problems weren't resolved by doing the reset then I suggest you contact Lenovo Support for warranty service. Both the problems you mentioned could be related to faulty hardware and the service center would be best equipped to check out your new laptop. You can find the phone number for Lenovo Support in your country or area by using the link below....
http://support.lenovo.com/us/en/supportphonelist_alt1
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

T-400 Right Click stopped working.

I have a Lenovo T-400 laptop Thinkpad and the right click stopping working on both keys....top one and the lower one.
Any ideas are welcome. I had a local computer store look at it...he took it apart and cleaned the keyboard and touch pad but it still does not work.

just those two keys ,all the other keys work? you can run a test on the keyborad from the thinkvantage toolbox
Thinkpad R61 7733-1GU
Thinkpad X61T 7762-54U
Thinkpad X60T 6363-4GU
Did a member help you today? Thank them with a Kudo!
If a post answers your question, please mark it as an "Accepted Solution"!
Regards,
GMAC

My key board stops working

My key board stops working as soon as i join a skype call

Welcome to the Lenovo Community !
Sorry to hear of your problems. I would suggest that you try a reset of the BIOS just to rule out any hardware conflicts the system may have. Try this........
1. Unplug the charger / adapter.
2. Remove the battery.
3. Press and hold the Power Button for 15 seconds.
4. Re-install the battery, plug in the charger / adapter if needed and power up the system to see if the problem was resolved.
If the problems weren't resolved by doing the reset then I suggest you contact Lenovo Support for warranty service. Both the problems you mentioned could be related to faulty hardware and the service center would be best equipped to check out your new laptop. You can find the phone number for Lenovo Support in your country or area by using the link below....
http://support.lenovo.com/us/en/supportphonelist_alt1
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

G580 Touchpad Click stopped working

Hi I have problem with built in touchpad on G580. It worked OK for two days then the click stopped working. I can move the mouse pointer but clicking has no effect, I tried a plug in USB mouse and that clicked OK.
After a few days it started working again. Then after two weeks stopped again. I went for a system restore and went back a month and all was ok again - so looks like a driver issue
Click stopped working again so I reinstalled Windows 8 Touchpad driver - didnt fix problem
Tried to do a system restore but going bacl one day didnt fix it and attempt to restore older than that failed.
Any ideas, really annoying
Rob

hi rob_s_smith,
Welcome to the Lenovo Forums.
Do you get the same problem if you're running in battery power?
If you don't, and the Touchpad is working ok when it's working on the battery then the touchpad board is probably getting grounded when it's connected to the charger - see this thread as it's similar to the problem.
If problem perist on battery and AC power then you may need to contact lenovo for service as the touchpad is showing an imminent failure.
Hope this helps
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

A certain set of keys randomly stop working in a Flex application

My company has a Flex application (version 4.5.1), and certain keys will stop working from time to time when typing in a TextInput (the MX variety).
Each occurrence has been on a Windows machine. I have noticed it in Internet Explorer 11, using 15.0.0.152 (developer version), and co-workers have noticed it on other versions of IE (I don't know which Flash Player versions they were using, but they weren't the developer versions).
About the only major change I can think of that may coincide with this issue would be having to convert a Google Map from using the Flash API to the JavaScript API.
The keys that have stopped working are: k, m, !, #, $, %, &, (, -, _, =, +, ', " (capital "K" and "M" still work)
I can still paste these characters into the text box even when the keys aren't working, so it's not an issue with the text box not accepting the characters. I can have the application open in multiple tabs and have things working normally in 1 tab but not the other. I have seen the keys stop working and start working again without refreshing the tab.

Understood. We have an extensive set of automated regression tests, and in the rare instances where we do break text input, it's an on/off thing. This is super interesting because it's so weird, but I have zero theories about why it might be happening.
If it is a Flash bug, there's probably a really long sequence of steps required to get it into a wonky state where this would occur, and the only way that we would figure out what's going on would be to reproduce it under an interactive debugging session. I'll ask around, but I've been working on the engineering team since 2006 and I've *never* seen this. I really like crazy stuff like this, but I've got nothing...

Delete on key board stopped working. I have been using fn-delete and shift-delete. Any solution to resolve this without having to use fn/shift??

delete on key board stopped working. I have been using fn-delete and shift-delete. Any solution to resolve this without having to use fn/shift??

Yes but there's no point doing it here. As the Terms of Use make quite clear this is a User to User forum. It's Users like you talking to other Users. It's not a channel to communicate with Apple.
Regards
TD

After upgrading to IOS8.1 my microphone stopped working. cannot make a call, cannot record a voice memo, but Siri works !!!

after upgrading to IOS8.1 my microphone stopped working. cannot make a call, cannot record a voice memo, but Siri works !!! Surely this must be software since I presume there are not two microphones, one for Siri and one for everything else. Tried resetting, rebooting, switching off noise cancelling. What else is there?

Hi there hansadj,
You may find the microphone troubleshooting steps in the article below helpful.
If your voice is too faint or sounds unclear using iPhone, or iPod touch
-Griff W.

After 3.0.1, ringer & key clicks stop working! HELP!

Similar Messages

Maybe you are looking for