After 3.0.1 upgrade Music takes 1-2 min before playing each song

Both of my Apple TVs are doing the same thing. Prior to the upgrade everything was working fine.
I have everything in my itunes (music, movies, tv shows). All of them are on my drobo which I've tried hard wired and using my drobo share.
Movies and TV Shows play fine and only take a few seconds to load.
Music *****, for some reason it takes a long time for the song to start playing and if I choose a playlist each new song it takes 1-2 minutes before it starts playing.
Both Apple TV's stream from my iTunes, it has to be something with the update because it worked fine before.

tmartine
Please dont take this the wrong way, but from a troubleshooting stand point that was really awful suggestion. Being I have two Apple TVs and considering I have a drobo on a raid system and use it every day. The only thing that changed was the Apple TV update which would be the cause the of the problem. Heck even my GF noticed it before me because she plays music all the time and shes computer dumb.
I'm also having the issues where after sleep mode it is doing dumb things like cant find my library or wont load. I'll have to reboot it, and sometimes like yesterday I was listening to radio channels and the **** thing hug and rebooted. Its been doing it alot both of them.
To be frank I'm ****** off at Apple products lately, I guess because their selling more their quaility has dropped. My 15in macbook had less problems than my Unibody 17 in went in for repairs, my parents older iMacs are great, but my brothers new 13 in uni had to go in for repair as well. Both my apple TVs are acting up now too.
**** the **** new mac mini still doesnt have HDMI out, which is just stupid considering the mini-dvi doesnt do audio out and Apple has always been about smart and less cable designs, just seems dumb in my opinion.
BuckSaddle
Thanks I'll be complaining over there in a bit! I'll be marking your answer as solved!

Similar Messages

  • Hi! I bought a song on itunes, and now it won't play on my computer or iPod. Itunes on my computer keeps telling me that I'm not authorized to play the song on my computer, even after reauthorizing it. Is there anything I can do to play the song?

    Hi! I bought a song on itunes, and now it won't play on my computer or iPod. Itunes on my computer keeps telling me that I'm not authorized to play the song on my computer, even after reauthorizing it. Is there anything I can do to play the song?

    Hello
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/ts1389
    Best of luck,
    Mario

  • My music app shows it's still playing a song but it's playing next song without finishing the last song.

    Since I had my iPhone 5S (I now have a 6 plus), I've had a problem with my iPhone Music app showing that it's playing certain songs but towards the end, it jumps to the next track, but without finishing the one it was playing. The music bar doesn't change - it shows as if it was still playing the former song. It happens randomly with certain songs and it appears all my playlists have been affected by this. I've restored the phone and restored both an iCloud backup (to rule out software issues that iTunes is copying over into the phone) and an iTunes restore from backup. I've also deleted entire albums and redownloaded them right onto the phone, hitting the exact same snag. I've also restored the phone and started it as a new install and hit the exact same snag. Any help would be greatly appreciated!

    OK. Since no one replied I restored my Nano 2. It still does this. Can anyone say theirs doesn't? Stop the music halfway or anyplace inside a track. Let the iPod rest for a few hours. Hit Play again. You see the song you were on and the place where you were. It is in Pause mode. Hit Play again to continue the song. At this point mine skips to the beginning of the next track. If I left click the wheel, it skips over the previous to the one before that.
    This does not happen with my 80G Video iPod. It holds it's place and the music continues.
    This is an 8G black Nano.

  • Why will the Apple music app on my iPad not play certain songs???

    Hi,
    Suddenly I noticed that certain songs, that will play without problem within iTunes on my PC, and with no problem on my iPhone 4S, will NOT play at all on my iPad (MB293KS) running iOS 5.1.1...
    I have reset the iPad and then downloaded everything again, but the problem is till there. The songs that will not play are AAC-files and sampled in 44,100 kHz, 256 kbit.
    If I use a third party player on the same iPad, like Bongiovi DPS, the songs play all right!!! So it seems that something is really wrong with the Apple Music App on this particular iPad??? What can I do about this? Are there any other music player I should concider as replacements for the Apple Music App? (Besides the Bongioivi, that is...).
    Thanks!

    I have now updated to the new iOS 6.1, but still this problem persists! How is it even possible to be able to play the songs in iTunes, on my PC, and on the specified iPad, using for example the Bongioivi app, but NOT when I use Apple's built in Music app?
    So before the 5.1 upgrade, the songs were playing all right. But AFTER this upgrade, and still after the 6.1, they won't play???

  • I downloaded some music but there's two copies of each song showing up on the phone but not on itunes or anywhere else.

    I recently downloaded songs off of itunes on my computer. usually i don't do this because i think its a pain in the *** to connect my iphone to the computer but since i had recently updated it with icloud and the new ios software i figured i could do it just this once. well anyways i downloaded some songs on the PC i have and everything was going well up until i was about to connect the iphone to sync the songs. for some reason i remembered about icloud and i looked up the songs on my phone and sure enough there they were i clicked on them to see if they would play but they wouldn't so i just connected the phone to the computer after everything had synced i found that there was now two copies of the each song i had just bought.  at first none of the songs would play but then i connected my phone to wifi and i think this is when the icloud came to into work because now one song will play and the other wont. it annoys me because its not showing whether i double bought the songs or if its some kind of stupid glitch. i dont think i double bought them though because theres no double copies showing up on itunes. i just want to know how to fix this because its annoying to have two copies of the song when one doesnt even play. could anyone please help?

    Apple does not respond to these forums but users do.  You can sync both devices to the same computer using the same itunes account.  After initial setup you can pick and choose what apps you want on your devices.  I have an iphone, ipod touch and ipad that I sync to the same computer and account.  I have different apps, music, photos, etc on each.  The key is one computer, one itunes account and you will be fine.

  • The installation of avid studio on my mac does noet work, how do I solve this problem. It takes approx 50 min before the MAC starts

    I try to install AVID studio on my IMAC, First I installed Parallels and Windows 8. If i want tot install AVID studio the IMAC takes very long to start up. On My windows PC installation of AVID takes approx 20 min. On my MAC i wait and wait until the end the installaion stops and nothin happends (50 a 60 min). Who can solve this problem.
    regards
    Kees

    Are there any dialog boxes popping up behind your Yahoo screen?
    I have intermittent problems attaching files in Yahoo mail and this is usually the reason.  I'm also using an iMac (10.7.3) and this is likely the problem.
    It is generally a Yahoo issue rather than a Mac problem.

  • HT1491 I downloaded a song and it can up in my music library but it won't play the song

    I downloaded a song and it can up in my music library but it won't play the song

    Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting the track from the Music app on your iPad and redownload it via the Purchased tab in the iTunes store app (or via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes).
    If you aren't in a country where you can re-download music or if the re-downloaded version also doesn't works then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
    If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Looking for a music / radio app  that let me play all songs of one artist

    Say Madonna or Britney. Last.fm let me play music LIKE selected artist but not strictly OF that artist.
    Then I can buy songs i like via itunes. Itunes only play 30 seconds so u don't know if you'd like the whole song or not.

    doesn't exist .
    why don't you just create playlists of those artists individually in your itunes?

  • I downloaded some music from iTunes and when I played the songs the screen went black and had fireworks, but this has disappeared.  How do I get it back?

    How do I get my music when played to revert to black screen with fireworks?

    Delete and redownload them if doing so is free in your country.
    (98014)

  • My music files move location when I play a song?

    Currently all my music files are in F:\iTunes\iTunes Music\Music
    Everytime I listen to a song on my PC the file moves to F:\iTunes\iTunes Music starting a new folder for the albumn and artist there?
    Only the songs I play move location?
    I think this has onlt been since the last iTunes update?

    Assuming you are in a region where you are allowed to redownload your past music purchases, delete the broken tracks from your iTunes library, go to the iTunes Store home page, click the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
    If you don't see them straight away it may help to restart iTunes. While downloading select Downloads in the left-hand column and make sure Allow Simultaneous Downloads is unticked.
    If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the report a problem links in your account history, or via Contact Support.
    tt2

  • Itunes stops after playing each song

    Hello
    my itunes has suddenly stopped playing the next song automatically. I missed have accidentally clicked something in the settings but i can't work out. So now i have to press play everytime for the next song. Humble apologies if i have missed something obvious.
    All help gratefully recieved...
    Many thanks

    whats happened is all the songs are missing checkmarks beside them, you have to put a check mark beside them.
    The exact key combo I don't remeber rightnow but I think its something like holding shift/ctrl then checking one song checks all the others in the list

  • My shuffle is saying after 15-20 min of playing "all songs " every 1-2 min

    how do i resolve this - pls help

    Are you using the shuffle 3rd Gen while exercising? There are many affects of getting sweat or moisture into the remote on the headset of a 3rd gen shuffle. A very small amount will cause the remote to think you are pressing it when you are not, this will do a number of things including the "all songs" announcement, as more moisture enters the remote the volume controls start to fail and then eventually you can no longer advance your songs. In my case my songs start to fast forward on there own so I just have to shut off the unit and wait for the remote to dry out. There is an entire thread devoted to the issues around moisture with the 3rd gen remote
    Message was edited by: wallyone

  • Just upgraded to the 4S, itunes won't play some songs on my phone?

    I just bought the 4S and syned my phone w my macbook and did icloud back up. All my songs are on my phone but some will not play now? Why??

    I may have figured it out. The library folder was right but the associations were not. I went to file and add to library and pointed that back to my library on my external and all the associations are being rebuilt. I hope this works. The files are being added to iTunes as I type.
    Just an FYI if someone else runs into this issue.

  • Music app forgets which song I was currently on and goes back to a previous track played several songs ago.

    I believe this issue may be reverting to this specific track several songs ago because that was the last time I had my music app specifically open/unlocked.
    This has happened a couple of times now but I'll describe the last time.
    I was checking the current song playing by opening the music app (unlocking the ipod and loading the music app specifically)
    The ipod then played several songs after that (about 5-6 songs after the one I last checked)
    I unplugged my ipod from the car, continued to use it at home but not playing any music. (I didn't respring or power off/on)
    The next morning I plug the ipod into the car and it's back to the song that was playing 5-6 songs ago the previous day.  I have to hit next track several times to pick up where I left off.
    I'm used to the ipod forgetting specifically what place it was in the song I was last playing if I use it for non-music functions inbetween using it for music, but now it's going back several songs prior to where I last left off.
    The only thing different with my ipod lately is I upgraded my firmware to 6.1 after doing a restore and restoring from back up.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar          

  • How can I use a DVD of my band playing a song to create a Premiere 11 music video?

    Hi Everybody,
    I've been making a couple of music videos on Adobe Premiere 11 by the usual way of loading in a music track and then adding photos and an occasional live video segment (with the sound of that video segment turned off). Now however, I have a DVD with both music and video of my band playing a song in a club. I'd like to load it into Premiere 11 so as to make it into a music video that also has a title screen at the beginning and one at the end (as I've done before on my other Premiere 11 music videos that I created). After, I'd plan on uploading the Premiere 11 music video to YouTube.
    My question: What steps would I use to load the DVD of both live video and live music into Premiere 11, that's on my laptop, so as to make a music video out of it on my Adobe software?
    I'd appreciate any feedback, especially since I'm kinda new at using Premiere 11.
    Thanks!
    Bob

    Bob
    Based on your description initially or latest report, I am interpreting your description as an easy can do in Premiere Elements 11.
    It would be good to know what is on the DVD disc (DVD-VIDEO format on DVD disc or some video files burned to the DVD disc as data disc).
    But, either way, your answer to using the DVD disc content as source media in your Premiere Elements 11 project is as follows....
    1. Insert the DVD disc in the burner tray.
    2. Open Premiere Elements 11 to its Expert workspace.
    3. Go to Add Media/DVD camera or computer drive/Video Importer.
    4. In Video Importer, assure that the Source field at the top is targeted at your drive with the disc in it
    a. you should see your video files on the DVD....if DVD-VIDEO on DVD disc, then you need the check marks next to
    VTS_01_1.VOB and so on in the series of that file, such as VTS_01_2.VOB, VTS_01_3.VOB. Each file, except maybe the
    last one should have a file size of 0.99 GB. If instead someone has burned a bunch of video files (.mov, .mp4....) to a DVD disc
    as data disc, then you will find a bunch of files .mov, mp4 to which you will apply a check mark.
    b. In the Video Importer dialog, have a check mark next to Add to Timeline, then hit Get Media which will put the file(s) in Project Assets and on the Timeline.
    Please review and consider and then let us know if the above targeted what you asked.
    Thank you.
    ATR
    Add On...More details are relevant such as project preset - you setting it manually versus the project setting it automatically.
    But, we will save that for next time if we are on the right track for your overall task.

Maybe you are looking for

  • Internet does not work after Installation of Oracle10g on SuSE 10 Enterpris

    Hi, I installed SUSE 10 then configured the network services using network manager as it did not work by just putting the DNS servers and router address. The internet was working fine till I installed Oracle 10g. It somehow modified my DNS address fr

  • PSA Deletion problem

    Hi All, We are trying to delete the PSA requests by manually but when we go to few PSA tables there we are not able to delete the requests from the Data Source. The PSA Table name is also like this /BIC/B0000535001. When I try to delete the one reque

  • Retention Periods

    Hi, I've read this from the Microsoft support pages: Retention Range for File Data For file data, using the Create New Protection Group Wizard, you can select a retention range between 1 and 64 days for short-term disk-based protection, up to 12 week

  • Getting started with Discoverer

    Hi All, Please let me know the documents to get started with discoverer in oracle applications R12under linux RHEL 4 Also please let me know the default password for EUL manager to login into discoverer plus As sysadmin account in oracle applications

  • Portal Runtime error - Customization

    Hi, How to customize the Portal runtime error message page in portal. Is it required to modify any standard par file for this? If so what par file needs to be modified. Ramganesan Karuppaiyah