After 3.0 uipdate: connection to internet only via WIFI!

After the successful update 3.0 my iphone does only connect me to the internet via WIFI. If that is not avialable - which is the case most of the time - I cannot get into the internet at all. It only says "mobile network could not be activated", but does not connect me via telefone provider as before. This means I cannnot use mail and apps unless I am in a wireless network. Does anyone have experienced the same problem? I tried everything from taking out the sim-card to restart and sychronise again, but no change! Help please, as this is a very serious problem!

Phil,
Thanks for your interest in the problem. My network is rather complicated. A VDSL modem from my ISP does DHCP and NAT for the whole network. An AEBS Gigabit connected to it by Ethernet provides the wireless service, and an AEBS 1st Generation extends it. That network is configured for 802.11n 5GHz. A ZyXel 802.11g router is connected to the AEBS Gigabit via Ethernet and provides wirleess service for slower devices, which don't "see" the 802.11n network. It's the second wireless network to which the iPhone connects. The Macs are connected to the faster one, but can be connected to the slower one. Apparently the devices connected to the 802.11g network weren't getting a DNS, but that wasn't evident when connecting the Macs, because they specify my provider's DNS. (That was necessary because the Mail app was taking a long time to resolve URLs otherwise.) After restarting both AEBS and the ZyXel didn't resolve the problem,. I restarted the VDSL modem. That seems to have done the trick. I can't explain what happened, but I'm happy that the problem seems resolved.

Similar Messages

Ipad 16-3G connection to Internet only via 3G. Wi-Fi?

Dear All,
IPad1 (16 - 3G): Safari can be connected to the Internet only via 3G network.
There is no chance to connect to Internet via Wi-Fi.
Extremely inconvenientю
thank you for your answer!

I had similar problems I couldn't connect to the internet with 3g although it showed a good signal. I had originally set up my iPad with wi-fi because Apple failed to initially send me the 3g sim. I went as far as doing a full restore with no joy. I finally sorted it by resetting the network on the iPad
Settings/General/Reset/Reset Network settings
Hope this helps

I installed iCloud yesterday and since my mac book pro is slowing down to almost total freeze after 8 minutes when connected to internet. Anyone knows what to do? Many thanks

I installed iCloud yesterday and since my mac book pro is slowing down to almost total freeze after 8 minutes when connected to internet. Anyone knows what to do? Many thanks

Removed trend micro smart crap files from disco and it worked.

PXE boot OSD connects to Internet-only Management Point. A bug?

So here is the deal: SCCM registers the Management Points to be used in DPs PXE in a Registry file, it is done in alphabetical order (or install order), so all PXE boots will always connect to the first MP (Microsoft, WTF?). In my case, the first is an INTERNET
ONLY MP, why would PXE Booted OSD connect to that? Brrr..
Solution is to edit the registry, put the MPs in the right order and then it works like a charm.. until some SCCM maintenance task overwrites it with the default MP list, including internet only MP as first.
MPs don't respect boundaries and I cannot just block the ports (OSD will be slow, it first tries to connect to the internet MP, times out, then uses the next one).
A) This behaviour is a bug. PXE Boot should NEVER connect to Internet Only MP (OSD is not supported for IBCM).
B) Does anybody know what maintenance overwrites the DPs registry key "ManagementPoints"?
I cannot just use one MP. All external MPs are configured for internet only, internal MPs are configured intranet only.
Ideas?

The distribution manager on the site server is the component that populates the MP list on the registry of DP/PXE.
Dist mgr currently writes all the MPs and does not filter-out the internet-facing MPs.
Even if you manually edit the registry on the DP, dist mgr will over-write it the next time it updates the DP. You can try to put an ACL on the registry key which prevents the site server from updating it. However, the DP will never get updated by the site
for other things.

Problem = always shut down when connect to the internet (both via wifi & mobile data)

problem = always shut down when connect to the internet (both via wifi & mobile data) my problem is my phone (sony z1) regularly shut down automatically when connect to the internet (both via wifi & mobile data). it just happens after i downloaded and installed the latest available software (as following): Android version: Google Android 4.3 (Jelly Bean) Latest available software: 14.2.A.1.136 Release started: 2014-01-30 please suggest how to fix this problem.

I suggest you disable any battery savers or task killers if you have.Boot your phone in safe mode and see how it is:
http://talk.sonymobile.com/t5/FAQ/How-to-boot-your-phone-into-safe-mode/m-p/348008#U348008
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

I'm not able to connect to internet through my wifi router, which is Sitecom 150N working fine with pc

I'm not able with ipod touch to connect to internet through my wifi router, which is Sitecom 150N working fine with pc

Your router may not have given your iPod a valid IP address when the iPod requested it. To check on this go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address shown starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix for this can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router model and version (the 150n designation is not a unique model), the wifi security being used (WEP, WPA, WPA2), is MAC address filtering being used, etc.

Connect to internet, not via 3G, but via bluetooth network connection

I am considering buying this iphone,
and there are many options I can use to connect internet.
so can an iphone connect to internet, neither via 3G nor via wi-fi, but via bluetooth network connection?

The iPhone does not support tethering - at the present time anyway, which means using the iPhone as a modem for internet access with a computer, and the same in reverse - using a computer's internet connection to connect to the internet with the iPhone.

My ipad 2 and iphone 4S won't connect to app store via wifi but will connect via 3g

my ipad 2 and iphone 4S won't connect to app store via wifi but will connect via 3g - both are running 6.0.1 - I have tired several wifi networks but same result.

Hi LandJ1980,
I would recommend first trying these steps:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If that does not work, this article has some additional ideas to try, even though you are only seeing this with the App Store:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Cheers!
- Ari

Hello my iphone 3g can not connect to home network via wifi

Hello to all, with my iphone 3g can not connect to home network via wifi. This only happens if I apply protection to the network. Unprotected my Iphone connects fine. Obviously the password to write error-free. I can not figure out what depends on this factor, however, another iphone connects fine. Help me please.

I have a similar,but slightly different problem. My iphone 4 recgonizes my home wifi and shows it under Settings, but will not access it, no signal shown, just 3G. It will access other wifi signals. My wife's iphone works fine, as does an ipad and macbook. This is new for my iphone, about 2-3 days.
Help! I reset network settings and rebooted the router (Apple), no avail

How do I get my iphone to connect with my PC via WiFi

How do I get my iphone to connect with my PC via WiFi?

I Believe you are trying to use personal hotspot so you can use your 3G/LTE on your pc.
If that's the question, you'll need to turn on "Personal Hotspot" in settings (it's right below bluetooth), then go to your Mac/PC and connect to your iphone as you would with a normal wi-fi connection. You can change the random default password in the same menu where you have turned on "Personal Hotspot"

Q10 will not connect with BB Link via WiFi (updated software)

Hello! I have not been able to get my Q10 to connect to BB Link via WiFi since the lastest OS update. Before, it was not an issue. I can connect via USB without problems. I have uninstalled/reinstalled BB Link on my computer and it does not work even though both the PC and the device are connected to the same WiFi network. The checkbox in BB Link to allow WiFi connections is checked. It is not the end because I can at least connect via USB, but wireless was so convenient. Can anyone help? Suggestions? Thanks!

OK, just messing around with this more tonight. I was able to finally just get the iPod touch to connect to my phone via WIFI.
My question or concern still remains about the Bluetooth connection.,,,
Why is it that she can connect to my Personal Hotspot on my iPhone 5 even when I have the Personal Hotspot on my phone set to OFF?
Is this working as designed? Even if I change my phone's Personal Hotspot password, she can still instantly connect even if I have it set to OFF on my phone. You'd think that it would require for me to have it set to ON? Or at minimum, if I changed the Personal Hotspot password on my phone, it would at least prompt her to enter a valid password?
Thanks!

Cannot connect to internet when both wifi & cellular data are activated

I have setup a wifi network in my office to allow all my Apple devices to wirelessly communicate with each other. I purposely setup the wifi hub without Internet access: the sole purpose of the hub is to project data from various iPad's and iPhone's onto my Apple TV. This has worked flawlessly.
I receive a strong Verizon signal in my office which allows me to access the web on my wifi+3G iPad2.
Here is the problem: when I'm connected to both the cellular network and the wifi router (that does not have Internet access), I can no longer search the web. My belief is that even though I have a strong Verizon data signal, the iPad purposely switches over to wifi to access data, continuously searching for an Internet connection that isn't there.
Does anyone have a solution to this? Is there a way to override the iPad so it pulls data from the cellular network first, then from wifi? Please note that I do not have the ability to establish an Internet connection through the wifi router--only via the cellular network.
The goal is to be able to surf the web on the iPad using the Verizon network, and project what I'm viewing onto the Apple TV using the wireless hub. I can execute both actions separately, but not simultaneously.

The iPad uses wifi first for connection. If wifi is not available, it switches to cellular. I know of no way to reverse the connection. You'll have to make your connections manually each time. If you want to use cellular first, turn wifi Off.
 Cheers, Tom

Phone connects to the wifi just fine, my phone does not have signal and cannot connect to Internet away from wifi network t

i upgrade my iPhone 4 to iOS 6 and if I'm close to my router the signal indicator comes on and the phone connects to the wifi just fine, but if I step away from the router my phone does not have signal and cannot connect to Internet

I can use my iPhone only with wifi .
I don't get any signal and I can not connect to
The Internet without wifi.
When I don't use my wifi from home I have lost all connection to the net
My iPhone is on and working it does not shut down

I want to connect an Airport Express via WiFi to my internet connection and then connect its LAN port to the WAN port of a Time Capsule. Will then any device connected to the time capsule wirelessly be also connected to the internet?

Background is I can't hook up my time capsule directly to my internet connection via network cable. I tried to extend the network via Wifi, but that did not work. At the moment I have two wireless networks, one with internet connection and another one with my time capsule. So to use time machine I have to change my network all the time.
Can I buy an Airport Express, use is as a client to my internet connection wifi and provide that connection via network cable to my time capsule and all it's wifi clients?

The AirPort Express will connect to your existing wireless network if the network is using WPA2 Personal or WPA/WPA2 Personal wireless security settings.
So, it can join the network as a client and then provide an Ethernet signal to your Time Capsule.
Be sure to configure the Time Capsule to operate in Bridge Mode so that it will be operating on the same network.

Apple TV does not connect to internet over the WiFi network

I recently bought an Apple TV and hooked it up to my Sony 46" HD LCD TV.
My desktop is an iMac running Mac OSX Leopard
I have created a WiFi network using the AirportExpress conected to an ADSL router.
The wireless network is working fine and I have access to internet through my iMac or other PC and Apple laptops.
Yesterday, I tried installing my new AppleTV following the little instruction book. My problem is that while the AppleTV detects my network (it shows up as the network) and on choosing this network connects to the network but gives a message that it has not connected to internet.
As a result while it synchronises with iTunes on my iMac, it fails to download from the internet directly. I am unable to upgrade to the latest version or play YouTube or images from my MobileMe account or log on directly to the iTune Store.
I have tried figuring out the problem but unable to do so. Thanks for your help.

I am having a similar (or identical) problem. I have a network running on my airport extreme. My imac and my girlfriend's laptop can connect to the internet without issue. The apple tv finds my network and reports that it connects, yet it doesn't seem to. I cannot access trailers or youtube, cannot update, and cannot play purchased content. I reset the apple TV, but that did not solve the problem. Should I reset the airport extreme?

After 3.0 uipdate: connection to internet only via WIFI!

Similar Messages

Maybe you are looking for