After 4.2 upgrade iPad keyboard not working where it used to

Before installing 4.2.1 on my iPad I was able to go online and play soduku on the Times website
Now I cannot get the keyboard to appear
I did download the Times app, it was complementary with my subscription, that doesn't seem to have soduku in it.
What to do?

Similar Messages

After upgrade USB Keyboard not working to unlock cryptdev-ed HDD

Hi,
Is there any sane reason, why my USB keyboard does not work after upgrading right now to enter the keyphrase to unlock my hdd? (x86_64, kernel 2.6.28-1.1, luks encrypted hdd that contains an lvm2 volume) The keyboard works fine in grub, short time before I have to enter the password, it goes black (numblock LED turns off). Luckily I have an USB-to-PS/2 converter, so I just plugged it in there, the system recognizes this and I'm able to enter the password. Afterwards, pluggin the keyboard back into its USB port, it works again.
Has anyone encountered the same strange behaviour? Or has anyone a solution for this problem?
best regards

Even worse, my LUKS key is stored on a USB-Stick. After upgrading, my USB-Stick was not recognized and so the LUKS key could not be read. Luckily (very luckily) I had defined a plain text keyphrase for LUKS slot 2 and so I was able to enter this via the PS2 keyboard. Anyone who has not provided this "backdoor" for themselves faces a difficult task.
A bug report exists concerning this problem: http://bugs.archlinux.org/task/12867

After Windows 10 upgrade, scanner application not working

All was working fine prior to Windows 10 upgrade. Everything else works - printing is OK. Am using USB connection. From HP Printer Assistant when I try to activate "Scan an Dcoument or Photo" I get: "The HP Officejet Pro 8600 was not found" Tried the following: -- Switch to network connection. Established connection, but when I start HP Printer Assistant all I get is the Print options. No scan or fax options appear.-- HP Print and Scan Doctor. Loaded new software - not specified what software. The test scans run in this application actually work fine. But then I go back to the HP Printer Assistant and it still can't find the printer. So bottom line - no ability to scan.

Hi I will do my best to help you with getting your Officejet Pro 8600 Plus working with Windows 10.
Here are some Windows 10 resources for you to review first;Windows 10 Upgrade Guide for HP PrintersHP Printers That Work with Windows 10 I would uninstall any HP drivers or software packages, then try installing with a fresh download. If your printer is connected to the computer with a USB cable, disconnect the USB cable from the printer. Search Windows for uninstall a program, and click the Uninstall a program Control Panel setting in the list of results. In the list of installed programs, click your HP printer name, and then click Uninstall or Yes to confirm the uninstall.Follow the on-screen instructions to complete the software removal. If necessary, repeat these steps for any other HP printer-related software in the list.Restart the computer. Then download the newest software package HP Officejet Pro Full Feature Software and Driver. Please let me know if these steps resolved your issue, or if there is anything else I can do to help. I look forward to hearing from you! Thanks,

After 3.0 Upgrade Forward message not working

If i go to sms then click on a message the "edit" the option to delete or forward are at the bottom of the screen but when i tap either nothing happens - any ideas

If i go to sms then click on a message the "edit" the option to delete or forward are at the bottom of the screen but when i tap either nothing happens - any ideas

IPAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore

PAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore. Just get an Apple Logo then a flashing blue screen as if it is caught booting up. This has happened twice before and iTunes restore fixed it. But this time device not appearing in iTunes.
Running iTunes for PC. But as stated restore has worked before! Any help greatly appreciated!!

Place the device in DFU mode and let iTunes restore the device to factory condition.

[SOLVED] Xorg and keyboard not working after upgrade.

Hi guys,
after a `# pacman -Syyu` I got Xorg not starting and keyboard not working: I am unable to do anything.
I'm posting here pacman's log that I got by booting an Ubuntu Live CD: https://gist.github.com/anonymous/7517806
Any hint?
How do you recover a system once it's gone like this? Many thanks in advance.
J
Last edited by ifsixwasnine (2013-12-23 13:58:16)

WonderWoofy wrote:
I wouldn't necessarily call this [SOLVED]. At best I would probably mention that you found a workaround. The addition of '(downgrade)' likely makes it fine, but just FYI for future threads. There are two reasons for this. One, others who find this thread are likely to dig into it thinking there is a real solution, and two, if you mark it as [Solved] it might generate less attention, lessening the chances of you actually being helped to a real solution.
Just my 1.46¢
You're right, problem wasn't actually solved. In fact, yesterday I upgraded the whole system again and the same problem showed up, but I got it fixed.
Same scenario: after a boot (shorter than usual), what I had was a tty, but I noticed something that I hadn't noticed the last time: the prompt said "Arch Linux 3.11.[?]".
The kernel version was supposed to be 3.12.[?] so I started investigating and after several attempts, this is how I got the system working again:
1. Chrooted into the system
2. Wiped /boot
3. Re-installed grub
4. Re-installed linux kernel
5. Re-created grub.cfg
6. ???
7. Profit
I'm pretty sure that what originated the problem wasn't a "kernel issue" as I pointed out in my previous post, but it was an incorrect installation of grub: in fact, the grub prompt never showed up before yesterday, the system used to boot straight, ignoring the 5 seconds timeout.

My MacBook Pro keyboard not working correctly after Win7 bootcamp installation. In OSx boot it keep Win keyboard. How can I have Mac keyboard in OS boot and Win keyboard in Win boot?

My MacBook Pro keyboard not working correctly after Win7 bootcamp installation.
Installation went well but when I boot either with OSx or Win it always keeps Windows keyboard.
How can I have Mac keyboard in OS boot and Win keyboard in Win boot?

Hi - I have the exact same model as your MacBook and had a few questions as mine is acting up. I upgraded the ram to 8gb (2x 4GB ram) and ever since then my computer has not been running as smoothly and the start up time is horrendous. Have you encountered this problem? And if so how did you fix? What would you advise me do?
I was thinking of reverting back to the original factory 4GB then rebooting the entire computer. Any suggestions?
Thanks in advance!
Allen

Keyboard not working correctly after updating to 8.1 64bit pro.

Keyboard not working correctly after updating to 8.1 64bit pro.
After I updated, everything seemed ok and then all of the sudden I rebooted and only the f1 – f12 row would work. I resorted to resorted to unplugging and removing the battery and it would work for a short amount of time. This has been reported on other laptops as well, see here.
http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/windows-81-keyboard-problem-cou...
I think it can be solved with a driver update from hp or the keyboard builder but none is online.

Hi,
Please put the units product no. in the link and check if your PC is tested by HP with Windows 8.1
http://www8.hp.com/us/en/ad/windows-8/upgrade.html
Let me know if you need more help.
I am an HP employee.
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on “Kudos” STAR to say thanks!***

The device mini iPad is not working after the update of the system

Hello,
I need help that my mini iPad is not working at all. I started an updating process from the system but then it shuts down and it never opens again! even though the charge is full.
please replay me .
Best,
Mawaddah

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

After I've upgraded my iPhone iOS to 5.0.1, I got problems with connectivity. If my iPhone lose network, then it gets frozzen and I cannot make calls. After restart the telephone still does not work.

After I've upgraded my iPhone iOS to 5.0.1, I got problems with connectivity. If my iPhone lose network, then it gets frozzen and I cannot make calls. After restart the telephone still does not work.

1. Download the iOS 5.0.1: http://www.tobias-hartmann.net/2011/11/download-ios-5-0-1-veroffentlicht-direkte -downloadlinks/
2. open itunes,Click in iTunes while holding down the Shift key (on Windows) or Alt key (Mac) to restore and firmware

The sound in my IPad is not working after I downloaded the new iOS 7. I tried to reset the IPad to no avail. Could anyone be so kind to help me?

The sound in my IPad is not working after I downloaded the new iOS 7. I tried to reset the IPad to no avail. Could anyone be so kind to help me?

I"m going to make the presumption that you've checked the volume and that you don't have it muted. One thing some have suggested is to go into the settings and reset all settings.
It is kind of a drag because you wil have to retweak everything but it's helped for some.

What has happened to the iPad 2 finger select and drag technique? Since upgrading to iOS7 it does not work? I used this all the time to select multple images, approx 75 from an SD card containing 1000 images. Its painful indvidually selecting the images

What has happened to the iPad 2 finger select and drag technique?
Since upgrading to iOS7 it does not work?
I used this all the time to select multple images, approx 75 from an SD card containing 1000 images. Its painful indvidually selecting the images

What would you like us to tell you? If it doesn't work, there is nothing that we users can do about it.
Please submit your feature request to Apple at this link: http://www.apple.com/feedback

USB Keyboard not working after running Monolingual

Okay, I'm not a Mac person and should have known that I was going to mess up my mother's iMac, but here it is -
In an attempt to improve the mac's performance I performed all of the actions described in the following article: 11 Ways to Optimize your Mac's Performance ( http://lowendmac.com/eubanks/07/0312.html ). Basically, I cleaned up files and 'other' system preferences. Things seemed to be fine and the computer did run much better. However, after running Monolingual and deleting what I understood to be 'unnecessary' PowerPC files the standard USB keyboard is no longer working.
I've tried to search for various remedies, but have come to a dead end. So I'm left with reinstalling the Snow Leopard OS (I think it is 10.6.8?) BUT I can't because it is asking to input the account password (which I know) to make the change and I can't figure how to do that when the keyboard not working.
Any help would be great!
*feeling like a bone head*

How are you trying to reinstall Snow Leopard? If you're booting from the Snow Leopard or iMac Install DVD that came with the system then that should eliminate any of the issues you may or may not have caused when you deleted did the clean up work on your mom's system.
I suggest trying the following:
0) Verify that the caps lock key is off. It can make inputting passwords difficult if you don't realize it is ON.
1) Reset the PRAM by restarting the system then quickly press the command-option-P-R keys before the gray screen appears. Wait until you hear the computer restarts two times as indicated by the startup chime. For more info refer to http://support.apple.com/kb/ht1379.
2) If the issue persists after the PRAM reset then boot from the Snow Leopard or iMac Install DVD, whichever you have. Once you see the menu asking you to choose a language try using the arrow keys on the keyboard to move the language choice selection. If the arrow keys are working at this point it indicates your keyboard is at least partially functional. Go ahead and select the language then proceed to step 3.
3) Once the next screen appears move the cursor up to the menu bar area and pull down the Utilities menu. Select the 'Terminal' application. Once the Terminal application launches try typing the various keys on the keyboard and check to see if the correct characters are displayed. Please let us know if you detect any errors. If there are no errors then you should be able to quit the Terminal application and proceed with reintstalling the OS.

After sending sound from find my iphone, now ipad does not work

after sending sound from find my iphone, now ipad does not work
it can't be unlock and scrren is blank, only siri works

Try a reset: hold down the home button along with the sleep/wake button until you see the apple, then let go.

Tried to run ios5 upgrade, get unkown error 0xE8000065 and now ipad does not work at all and is frozen can not even switch off

tried to run ios5 upgrade, get unkown error 0xE8000065 and now ipad does not work at all and is frozen can not even switch off

Try a hard reset and go from there. You might try a manual install (using DFU Mode), as outlined in the link below.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

After 4.2 upgrade iPad keyboard not working where it used to

Similar Messages

Maybe you are looking for