After 4.3.0.37 the divices only show up as "virtua...
Dear people, Have two soundcards here and use the microphone of the webcam. Since the upgrade of yesterday to version 4.3.0.37 the divices only show up as "virtual device" and can thus not be set anymore. So no skype here. Any suggestions? Kind Regards, Peter
Attachments:
skype.png 42 KB
Hi guys,
I think I found a solution.
Problem here (openSUSE 122 x64) is, pulseaudio is/was installed but was not started in a correct way.
I try to show very briefly what i did:
* check/install: alsa-plugins-pulse and alsa-plugins-pulse-32bit, libpulse-mainloop +32bit, libpulse0 +32bit, pavucontrol, pulseaudio*
* VERY IMPORTANT: check settings with paprefs! I had to make this changes:
TAB: Network Access -> check "Make discoverable PulseAudio network sound devices available locally"
TAB: Network Server -> check "Enable network access to local sound device"
TAB: Simultaneous Output -> check "Add virtual output device for simultaneous output on all sound cards"
* changed the Desktop Icon cmd to: ( pulseaudio & ) ; env PULSE_LATENCY_MSEC=30 skype
* start the "icon"
* config the correct outpu/input device & sound level in: pavucontrol
(skype has to be running to see/configure it)
all this worked for me, maybe not all is necessary. i don't know.
hth, best regards,
axel
Similar Messages
-
SAPScript: why the window only show the LAST line
Dears,
In my form, one of the window only show the LAST line of the it.
I have set the window enough space, also when debuging the program , open_form, write_form,
all of those sy-subrc = 0.
both static texts and dynamic texts are set in the window, but only the last line shown.
Anyone could help me?
Thanks a lot.
Sincerely,
Julie LvHi,
There are several possibilities to resolve your problem.
You can work with 2 main windows on in1 page.
With NEW-WINDOW you switch to the next main-window
How to use it.
make an item in main window with that /: NEW-WINDOW command
if you are ready with first loop call a WRITE_FORM with that NEW-WINDOW statement.
to cojntinue in the other main.
Other possibility is. (in case there are not ot many lines)
Use for every line other variable names.
Fill these in the loop. And after loop WRITE FORM
eg. (if maximum is 3 lines)
&VAR1_1& &VAR1_2& &VAR1_3& &VAR1_4&
&VAR2_1& &VAR2_2& &VAR2_3& &VAR2_4&
&VAR3_1& &VAR3_2& &VAR3_3& &VAR3_4&
Hope this helps.
Gr., Frank -
My computer was reformatted and after I installed iTunes and synced with my iPhone 4S, the playlist only shows on my iPhone and not on my computer in iTunes.
Any suggestions as to how I can get it back on my computer?I've been experiencing the same problems, until my friend told me to manage my songs and albums manually instead of syncing it. to do that, connect your phone to the macbook via usb and go to 'songs', and scroll down. check the box that says 'manually manage songs and albums', and from there all you do is drag-and-drop your playlists into your iphone under the 'device' tabs. as for the random songs, uncheck the box that says 'automatically fill free space with songs'. hope this helps!
-
i have itunes on a mac with 2 users but the library only shows on the main user how can both users have the same library?
Hi,
Have a Look at these Links on Home Sharing:
http://support.apple.com/kb/HT4620
http://support.apple.com/kb/HT3819
Could be what you need...
Cheers, -
I had my last ipod stolen, when I got the 5th Gen I restored from my old ipod from itunes and now there is a bunch of crap on there that I don't want, but the songs only show up on the ipod so I can not delete them off of the ipod from itunes. Any quick fixes to remove the unwanted songs, or do I have to start over completely?
Do they play on the iPod?
If not then they are corrupted.
Connect the iPod to your computer and look at the storage used by the various categories as shown in the colored bargarph in iTunes.
Come back with the results.
What is the Other on my iPhone and How to Remove It
If the other is larger than about 1 1/2 GB that indicates corrupted file. -
My apple TV is not working. The light blinks but the TV only shows the apple picture and nothing happens. Any idea why?
James,
Thank you for the information. I did what you said but it is still not working. My apple box works with my wifi so I think the wife was disconnected and I can't figure out where to go to set up the wifi pass word for the apple box. Any hits would be appreciated if not my next step is to ship back the box to apple.
Thanks,
Marta -
The search only shows my library - no store. have version 12.0.1.26
The search only shows my library - no store. have version 12.0.1.26. Once I upgraded the search itunes store disappeared. Any ideas?
What are you viewing when using the search box ? If you are in the store then it should search the store - is that not happening ?
-
Photos in iPhoto album are only a hash-marked outline the image only shows when scrolling how can I see the image and open the photo?
Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
I restarted my computer, but the screen only shows a flashing folder icon with a question mark. What to do?
It means that the system boot directory can't be found.
See this support article for suggested actions
Also see this discussion. -
my iphone is detected in itunes as normal, but screen on the phone only shows apple logo??? restored and everything but no difference its weird, it restores successfully and stuff but once done the screen only shows apple logo.. note:while restoring everything goes through as normal on the phone it shows the bar loading etc.. but once complete just stays on apple logo.
It can take a few minutes to reinitialize, but if it stays on the Apple logo for as much as 10 minutes there is something seriously wrong. Try restoring again, and set up as a new phone rather than installing your backup. If this fixes it you have a corrupt backup. If this doesn't fix it the phone is broken. Or possibly jailbroken.
-
I have a new computer and I am trying to find a link to download photoshop elements premier 11 the link I was sent by the tech only shows what I need...what I need is an actual download button
This is actually the Photoshop forum. Premiere Elements forum is here
Premiere Elements
I assume you realise that 11 is not the current version, which is now up to 12
http://www.adobe.com/cfusion/tdrc/index.cfm?product=premiere_elements&loc=us
And if yes, that you had 11 installed on your last computer? Did that come on a disk or download? If disk, have you now lost that disk?
If yes, and you registered your software, log on to your Adobe account, and find My Orders (or similar). You may find the download link and your serial number there. -
one fine day yesterday, my i phone just hangup lost all contact detail. The screen only show a picture depicting cable connection to iTune. I have tried to restore iphone to factory setting but not working . May i know how to proceed to recover lost contacts.
I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.
-
I updated my Ipad with IOS7.1.1. After more then 12 hours, the screen still show the white Apple logo. How can I shut it down or reboot it?
It works really well.
Thank you for your tip.
Alain -
I typed in data into the highlighted text box, and then tried to print my form. However, when printed, the copy only showed a portion of my answer. Is there a way to expand Adobe Reader's highlighted text to show my full response, or should I make my responses only as long as the highlighted portion allows?
While printing any pdf file it will print the visible text only. To overcome this, the form needs to be dynamic so that it expands in layout while entering more data. Usually dynamic forms are developed by Adobe LiveCycle Designer.
~Deepak -
I purchaised MPV's Core Numbers '09 101 software online yesterday. The software only shows the toutorial, and I couldn't find the actual spread sheet. I have taken a long time watching the toutorial. Please help me on how I can find the actual spread sheet to work on. Thank you in advance
Visit the developer site for help.
https://www.appomator.com/support/
Maybe you are looking for
-
Help! iPhone will no longer sync with my iTunes library
My iPhone thinks my iTunes library is not the one it is used to syncing to anymore for some reason, and whenever I try to sync music or applications, I get: "Do you want to erase this iPhone and sync with another iTunes library?" I don't want to eras
-
Itunes 7 and ipod will not talk. No WAY TO RESTORE FACTORY SETTINGS!
Hi, update to itunes 7, plugged in my ipod and got the message "itunes cannon read the contents of the ipod "IPOD" Go to the Summary tab in ipod prefrences and click Restore to restore the ipod to factory settings". But there is no ipod prefrences ta
-
Why won't my hotmail account sync between devices?
It's really annoying to have to see and delete emails on every single on of my devices. I have icloud all set up and all the settings I believe are correct. Yet, they don't seem to me syncing or mirroring one another like I thought they would.
-
My Mac will not let me unzip ANYTHING with ANY PROGRAMME. I have downloaded and tried countless apps but i cant unzip ANYTHING period ! Any ideas ? Cheer Richard
-
I am doing a NamedCache.entryset(Filter) where I am trying to look up based on an indexed property. Is there a way to delegate this call to the backing cachestore if the cache is configured to have one? Right now, if its not found in the cache, it re