After 4.3.3 update, with International assist enable, all US calls start with 001 area code number. If disabled, works as before upgrade. New feature ? working as new design?

I upgrade my 3GS yesterday to version 4.3.3 without changing any settings. Now all incomming US calls are displayed starting with 001 + AC + Number. Incomming calls do not match entrys in contacts list. Calling number cannot be dialed back with the way the number presented e.g. 001 +.
International assist is enabled under settings. When International Assist is disable, works as it has for the past year + (the way it should)
Is this a new feature with version 4.3.3?
Or working as new design feature?

Gweeper64 wrote:
I'm sorry you've had a bad experience, but the page does say:
Limited time offer! Only available by calling:
CALL 877.873.3278
Could that be any clearer?
Seems pretty clear to me. Even though they do not give an expiration date, it is certainly implied that it will expire at some point. If they give you the deal, then great. If they don't give you the deal, though, it seems that you are just crying for something that you don't deserve and that Verizon has no obligation to provide for you.

Similar Messages

I am having bugs with the ios 5, after it got the update it is unable to make outgoing calls. in-place the incoming and outgoing texts are working please help me asap...!

i am having bugs with the ios 5, after it got the update it is unable to make outgoing calls. in-place the incoming and outgoing texts are working please help me asap...!

Sometimes and this is network dependant if they suspect the phone to be lost or stolen as in this case with change of Sim card and provider then the origonal network can and some will block the phone untill you have rang them and proven it's not the case or if you have bough this 2nd hand then the origonal seller may have stopped paying the contract bill and thus the phone is blocked

Firefox has been crashing a lot lately. All of this started with the 2nd-to-last Firefox update -- I refuse to do the new update because I'll lose an invaluable --to me-- add-on, ljlogin).

It does happen when I have multiple tabs open, but I generally have a LOT of tabs open so this is not new behavior from my browsing, Firefox is just not handling it anymore. All of this started with the 2nd-to-last Firefox update -- I refuse to do the new update because I'll lose an invaluable --to me-- add-on, ljlogin

Are you sure the multi-links icon on the bottom bar of your firefox window is enabled (ie not greyed out)?

My fiance and i share 1 icloud account on 2 iphones, after the ios 7 update he can now see all my messages on his phone, how can i fix this?

my fiance and i share 1 icloud account on 2 iphones, after the ios 7 update he can now see all my text messages that I type on his phone, how can i fix this? I don't see any of his, just the other way around. The icloud account is in my name.
also, would this affect being able to facetime each other?
Thanks!!

we do what your doing... we use the same ID for "Icloud".
We do NOT use the same ID for: Face time and Imessage

TS3406 Everytime is restart or update my iPhone 5s it stops making calls, i tried the air plain mode toggle & to reset thenetwork setting, it's not working !! What should i do ??

Everytime is restart or update my iPhone 5s it stops making calls, i tried the air plain mode toggle & to reset thenetwork setting, it's not working !! What should i do ??

If it has been officially unlocked, it will stay unlocked after an update:
iPhone: About unlocking

BE3000,E1 line out, internal IP PHONE normal phone call, phone prompt reversal of "The number dialed is empty" how to solve

HI,
BE3000，E1 line out, internal IP PHONE normal phone call, phone prompt reversal of "The number dialed is empty" how to solve
thanks

We need traces to figutr out what the problem is. Please make the call, download traces from the diagnostics page and send it.
Thanks

Apart from backing up all docs, music, movies and pics, what else do I have to do before upgrading my 2007 24"iMac with 2.33 Core Duo/2 GB SDRAM and OSX 10.4.11 to Snow Leopard10.6.3? from

Apart from backing up all docs, music, movies and pics, what else do I have to do before upgrading my 2007 24"iMac with 2.33 Core Duo/2 GB SDRAM and OSX 10.4.11 to Snow Leopard10.6.3? from

In addition to the other suggestions, see:
http://www.macmaps.com/upgradefaq.html
http://www.macmaps.com/backup.html
http://www.thexlab.com/faqs/installswupdates.html
http://www.thexlab.com/faqs/backuprecovery.html

There are way too many photos on my internal hard drive. I have older libraries, and newer libraires in iPhoto and Aperture 2. What is the best way to find and reduce the number of duplicate photos/libraries before upgrading to Aperture 3?

There are way too many photos on my internal hard drive. I have older libraries, and newer libraires in iPhoto and Aperture 2. What is the best way to find and reduce the number of duplicate photos/libraries before upgrading to Aperture 3?

Sharon-
Good idea.
Back up first.
I would probably wait for the merge function of the latest version before merging. Be sure to verify every merge.
Merge Libraries, then from within Aperture move images to referenced on external hard drives.
HTH
-Allen

Blocking all numbers that start with +23

Hello,
I have a big problem, because someone from Nigeria is calling me all the time (i dont know where did they get tnis number!!!). I tried to bock their numbers, but whenever I do that, they just change the number and call again. I think I have bloked over 100 numbers, but they keep calling!
Is there any possiblity to block all numbers that starts with +23?
Tnx

Hi,
You will not be able to do this.
If the material number is fully numeric you can only have leading zeros On or OFF, you cannot store a material number with differeing leading zeros.
If this was a new implementation you could have set the "lexicographical" flag on the material master controls and you could then have whatever leading zeros you wanted, but this flag can ONLY be set BEFORE you add your first material and so you no longer have the option.
If you really MUST have this option then define an external number range for alpha characters and use an alpha character on the end of the number, so for 00456 you would have to create 00456a and train your users to ignore the "a". This is a really bad solution but you have no option of having variable numbers of leading zeros.
Sorry
Steve B

Since upgrading to 7.0.3 (iPhone 5 64gb, with iTunes Match enabled) all of my music wiped off my phone. Downloading it again, most of the artwork has been mixed up with other artists, and I'm no longer able to stream or download over 3G? Any ideas?

Since upgrading to 7.0.3 (iPhone 5, 64gb, with iTunes Match enabled) almost all of my music has vanished from my phone (weirdly some hasn't).
Downloading it again, most of the artwork has been mixed up with other artists, and I'm no longer able to stream or download over 3G (all tracks greyed out), though my network settings etc are all set correctly.
Lastly since upgrading to iOS 7.0.1 (and beyond) Genuis has become effectively useless: it continually asks me to connect to wi-fi, and if I do it creates playlists mostly composed of tracks by the same artists or those very obviously linked to them- previously it created brilliant, nuanced playlists.
Are these things connected, and how do I fix them?

I have done this on numerous occasions but I think that my Iphone has a defect. After many tries, reinstalls, deletion of content, changing content to be stored on external hard drive, deleting itunes and cleaning computer I managed to get all of the songs on and things seemed okay for a while.
The problem returned about a week ago after downloading a new album from Itunes. I now have 12.5k of songs leaving 10gb spare on Iphone which should be more than enough room to operate properly. Last night it seemed to be dowloading ok (after doing all of the above again for the umpteenth time) this morning it revealed that it had just synched 2.5k of songs and 18gb of "other" on the contents bar. it wont synch now as it says its over capacity. So the 18gb of "other" would probably be corrupted data that means it must corrupt each song as it tries to synch it.
The 2.5k of songs it did synch are working on the Iphone as is every song in the library on Itunes. I did completely delete the new album I bought and redownloaded it from the store then tried to synch just that album and it worked fine.
Just about time to dump apple I think!

HT4623 Updating iPad2 to iOS 7, all my photos in camera rolls are gone, can't locate them anywhere?! Were they just deleted, or is there a way to find them? Did not have iCloud account, so not backed-up there.

Just updated our iPad2 to iOS 7, and all my photos in camera rolls are gone, can't locate them anywhere. Were they just deleted, or is there a way to find them? Did not have iCloud account, so not backed-up there.

We're you backing up to a computer using iTunes? If so, restore the backup from there.

What are the new features in the new Mac 10.8.2 update?

What are the new features in the newwest mac update?

Read all about it:
http://support.apple.com/kb/DL1581

We have a 2.66 GHz IntelCore2Duo iMac; OS X 10.6.8. This morning the computer crashed while my daughter was working on a document. When she restarted it, all .rtf files start with "Applications/ical.app/" and some other garbled text. Not sure how to fix

Applications/iCal.app /ˇˇO ﬁImgRﬁFBIL“ ¬ √„P¶H+ s Ö√ßiø
ˇ˛ˇˇˇˇ    s m l   App.icns   Macintosh HD 1Applications/iCal.app/Contents/Resources/App.icns /ˇˇ”   wxyO †† √„P¶H+
Á√ rS
ˇ˛ˇˇˇˇ 
iPhoto.app   Macintosh HD Applications/iPhoto.app /ˇˇZiPhoto.appO
ImgR
FBIL˛ Ó √„P¶H+
È
> √»
8
ˇ˛ˇˇˇˇ
È
Ë
Á . NSApplicationIcon.icns   Macintosh HD AApplications/iPhoto.app/Contents/Resources/NSApplicationIcon.icns /ˇˇ %/DV^dqxÉçü°¢©≥æƒÀ—÷€ = ] @ G       % ˆ   Í Ò ¬ œ · Ë
∑
€
Ê
Ï
Û
¸ º … ∞ ∑ s | ] d $ /   % Â Ò ‡ Á ß ≤ ù § Æ π ø ∆ œ  ô ~ Ö ·   Î Ú!û!≥"≈"Ã%X%Ç&i&p(‰(ˆ)›)‰)Â)Ï)ˆ* * * * * *2*4*;*A*H+%+<,l,s- -$. . .•.Æ/}/Ñ0!1 1
1¨1∑ z2≈

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive & clear caches.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If that doesn't help Reinstall the OS.

Printer aligns BUT only with Black and Blue all other diagnostics print with all colours

Initially when installed the printer REFUSED to align, took 7 attempts (OK I have heard of Einsteins quote !). Each time I used the printer screen to ALIGN PRINTER - the process failed. So I looked on the web, and:
Cleaned the cartridges,
Cleared the vents
Removed and cleaned the printhead
Prayed
Tried again
All to no avail, so then I tried doing the diagnostics via the PC software, and here the mystery deepened.
When running the HP Photosmart B210 Series tool box I got three differing results from the three printing options
A Print Quality Diagnostics Page gave me Ba full five colour printout
Align Printheads gave me black and blue lies/boxes/grids and the Alignement Successful message
Print Diagnostic info gave me all four colours with lots of meaningful info including the 73 Print head Calibration COnfidence Level:0
Any Ideas ANYONE, before I bin this and buy a Kodak or Epson in disgust
This question was solved.
View Solution.

What exactly is the issue? The alignment aligns the color printhead to black printhead, and only one color (cyan for your printer) and black are needed for that. (There is likely an additional set of blocks that prints gray blocks fading to white. This section is used to calibrate the energy for the colors.) The other test pages you printed will print various diagnostic or test pages which will use all the colors.
A successful alignment page requires the page be printed on unused white paper and requires that the black and cyan sections are printing properly.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

After 10.8.3 update, Boot Camp Assistant not recognizing my 64-bit Windows 8 disc

Hello all,
Yesterday I got back from spring break and found out there was a new update to ML (10.8.3). After reading a bit, I found out that the new update supported Windows 8 via Bootcamp, so I uninstalled the old Windows 8 I ages ago via Boot Camp Assistant, and updated my OS to 10.8.3. Then, after attempting to install Windows 8 via Boot Camp Assistant, now it rejects my legit copy of Windows 8 Pro 64-bit, with a message saying, "Need 64-bit Windows 8"
A few months after Windows 8 came out, I read up an online guide to install Windows 8 without Apple's official support and it WORKED just fine. I just wanted to reinstall using the official support this time, and see what I get. Haha.
Please help me if you have a solution to this. (No way buying another copy of Windows 8)
Thanks.

Had this problem too, found a solution.
1) Download the 64bit Windows 8 Enterprise Evaluation. (http://msdn.microsoft.com/en-us/evalcenter/jj554510.aspx)
2) Go through the Boot Camp process, selecting the downloaded .iso as your image.
3) As soon as your computer restarts, hold the option key. Boot back into OSX.
4) Go through the boot camp process again, BUT only ticking the first two options (in other words, don't touch the partition) selecting your original Windows 8 copy as your image.
5) Reboot while pressing the option key, select the (in my case) USB.
6) Proceed as normal - worked for me.

After 4.3.3 update, with International assist enable, all US calls start with 001 area code number. If disabled, works as before upgrade. New feature ? working as new design?

Similar Messages

Maybe you are looking for