After 6.1.3 Apple TV update mirroring no longer works

I have 2 Apple TV devices. both devices were configured and working for AirPlay. After the devices were upgraded to 6.1.3 AirPlay no longer works. Performed a complete restore on both Apple TV devices still not working from 3 different iPads. One of the iPads also did a complete restore. still not working. Does Apple test these updates anymore and is there any chance this will be fixed in the year.

There is no 6.1.3 for ATV.
Are all devices on the same network?

Similar Messages

Apple Composite AV Cable no longer working on Ipad2 after ios8 update. Only getting sound, can you revert back to ios7 or buy a cable that will work any help would be appreciated

Apple Composite AV Cable no longer working on Ipad2 after ios8 update. I'm only getting sound no video can you revert back to ios7 or buy a cable that will work any help would be appreciated
Thanks

The 30-pin connector on the iPhone 4 dock might not have all the connector pins to do video.
I'm 99% sure the Universal Dock does have the pins (and therefor supports video out).

After the last update iTunes no longer works... "This application failed to start because MSVCF80.dll was not found. Re-installing the application may fix this problem" I tried and it did not fix the problem?

After the last update iTunes no longer works... "This application failed to start because MSVCF80.dll was not found. Re-installing the application may fix this problem" I tried and it did not fix the problem?

Click here and follow the instructions.
(99061)

HT4314 after i reset my apple id, i can no longer access my game center

Hello,
After I reset my apple ID, i can no longer access to Game Center. can you help me understand what happenned. thank you.

What happens when you tried? Did you try to reset your iPod? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear. Then try signing out and back in again with the new credentials.
Are you sure you were using the same account in Game Center as the Apple ID you changed the password for?
If nothing else, try a reset of all settings. To do this, head to Settings -> General -> Reset and tap Reset All Settings. This does not erase any of your synced/downloaded content.
B-rock

10.5.7: Automatic Software Update Feature No Longer Works

Ever since I installed 10.5.7 the automatic Software Update feature no longer works. (Manual updates work fine.) For example, here's what happened today with Safari 4.0.2:
1. After powering up I got the Software Update icon on the Dock.
2. I clicked it and it said I had updates that would require a reboot and it asked the usual stuff. (It didn't say what would update.)
3. I clicked to reboot now and it asked for my password and rebooted.
4. My MacBook rebooted but nothing had been updated.
So, I went to the Apple menu to check for updates and it said I had Safari 4.0.2 ready to be installed. This time, it worked. Unfortunately, I have to do this two-step process on every update that requires a reboot. I could turn off the automatic updates and just do everything manually but I prefer the automatic way. (I had it before, too.)
Thanks in adavance,
Brian

Jeffery,
Thank you for your quick response!
{quote:title=Jeffrey Lee wrote:}
How often do you have SU to check for updates? And do you have "Download important updates automatically" checked as well?{quote}
I have check for updates weekly and download important updates automatically enabled.
{quote}I'm thinking that the first time you approved the update, that it could have been for something that was already downloaded in the background, and just waiting for you to OK the install.
Then when you rebooted, and did the manual check, it found that the Safari update was available as well.{quote}
Interesting. I hadn't thought about that. ☺
{quote}There could be a host of other issues... but check the "installed updates" in the SU preferences, and see what, if anything, was installed right before the last Safari update... note the date and times and see if my theory might be correct.{quote}
Here's what it shows for the last month:
{quote}2009-06-11 00:03:05 -0700: Installed "Digital Camera Raw Compatibility Update" (2.6)
2009-06-11 00:03:10 -0700: Installed "iLife Support" (9.0.3)
2009-06-11 00:03:25 -0700: Installed "iDVD Update" (7.0.4)
2009-06-11 00:04:21 -0700: Installed "Safari" (4.0)
2009-06-17 00:03:28 -0700: Installed "Java for Mac OS X 10.5 Update 4" (1.0)
2009-06-17 23:30:01 -0700: Installed "Safari" (4.0.1)
2009-06-24 23:34:18 -0700: Installed "HP Printer Drivers Update" (1.1.1)
2009-07-09 18:38:49 -0700: Installed "Safari" (4.0.2){quote}
Also, I don't think it matters but I did upgrade VLC to 1.0 the previous day.
Thanks,
Brian

After upgrade to FCPX 10.1, paste attributes no longer works. Has any one had a similar experience or have an answer?

After upgrade to FCPX 10.1, paste attributes no longer works. Has anyone had this issue or have an answer to it?

Are you sure it does not work at all? Could be a problem with a particular project, or clip.
Create a completely new project, add some clips to it, Cmd-C in one clip, and try Paste Atributes into another. Does it not work?
Also, by "does not work" do you mean it is greyed out, or the window appears but nothing happens when you click "Paste"?

TS3581 iPhone 4S - The XCarlink iPhone/iPod accessory for Mazda Bose autochangers is functioning differently after iOS 5.1. The Shuffle function no longer works. Has anyone else experienced this problem?

The XCarlink iPhone/iPod accessory for Mazda Bose autochangers is functioning differently after iOS 5.1. The Shuffle function no longer works and it plays Albums or Genius Playlisys only (not self-made playlists). Has anyone else experienced this problem?
Previously, the iPod function enabled one to see the track that was playing and control playback (such as repeat or shuffle) via the iPhone screen. Now all I see is an "Accessory Connected" message.

Somewhere in there, is there a question for us, your fellow users in these user to user support forums?

I dont recall when I have been more frustrated.... the "loops" I am in on the web for support are endless. After downloading Yosemite on my Mac my CS6 no longer works. On your support web site you state the following for downloading and installing prev

I dont recall when I have been more frustrated.... the "loops" I am in on the web for support are endless. After downloading Yosemite on my Mac my CS6 no longer works. On your support web site you state the following for downloading and installing previous versions of apps, such as CS6 " 1. open CC for desktop and go to the apps panel (no link is provided so I explored until I could download a trial version of "application manager" as that was required. When I attempted to open it to download "Previous Versions" I could not. I have my license number, my CS6 will not open in Yosemite and after over 2 hours I am really frustrated.... Rich@

When I go to that link, download and then attempt to install I get the message "Webe encountered the following issues, Installer failed to initialize. Please down load Adobe Support Advisor to detect the problem" I then select the link "get adobe support advisor" that takes me to a site that describes a better support link since the one I have been sent to is no longer available. I then go to that site and am told to go to CC for desktop apps, that requires me to download CC... I don't want CC.. just want to have my CS6 PS work again.... so frustrating...

My daughter and I both have iPhone 4s'. Last night she switched to ios7 and I am still using ios6. I use the find my iPhone app to keep track of her and since the update it no longer works. Her phone says its on. ???

My daughter and I both have iPhone 4s'. Last night she switched to ios7 and I am still using ios6. I use the find my iPhone app to keep track of her and since the update it no longer works. Her phone says its on but when I try and locate it from either my phone or laptop it shows it offline. Any suggestions. It's my only peace of mind! Thanks!

Does she have her own iCloud account? You can have more than one iCloud account installed on a device, and some users install a secondary iCloud account which is common to others in the family to allow "Find My iPhone" to be used from one account while keeping separate iCloud contacts, mail, etc.
But with iOS 7 although you can still have multiple iCloud accounts installed, only the "primary" iCloud account supports "Find my iPhone". So if her iCloud account is the primary, you can no longer track her from your iCloud account. Is that what happened in your case?

After installing 10.9.2(Maverik), Java will no longer work. I went to the java site and downloaded. However, the new java won't work with maveric either. What do I do?

After installing Maverick 10.9.2, Java will no longer work. I went to Java Site to install latest Java, but Maverick won't recognize it.

Java SE Runtime Environment 7 1.7.0_51

Apple Wireless Bluetooth Keyboard no longer works after OSX update

After installing the latest OSX update yesterday (something about iChat encryption), Apple Bluetooth Keyboard no longer works with my iMac.
When I restarted the iMac after installation was completed, the iMac would no longer recognise my Bluetooth Apple wireless keyboard. I've tried with 2 other Apple wireless keyboards as well, but to no avail. None of them work with the iMac any longer. All 3 keyboards work with my PowerMac Quad G5 though.
The iMac "sees" the keyboards, but the pairing doesn't go through because the iMac doesn't seem to recognise the keystrokes when entering the pairing code.
I had to go out and buy myself a Microsoft wired keyboard to be able to restart the iMac (couldn't enter the login password without a keyboard).
My bluetooth mighty mouse works flawlessly though.
Very frustrating. Can anyone help?
...tt
iMac 24" 2.33GHz 3GB Mac OS X (10.4.8)

And yes I checked the batteries.

TA38482 after i installed an apple software update i lost my shortcut to itunes and now cannot startup itunes. Any ideas

I was alerted to an Apple software update on the bottom of the desk top. I clicked this and then installed the update. When i next tried to use the shortcut to startup itunes I got a message which told me the shortcut had been moved or was no longer working.
I looked for another shortcut but could not find one. Next time i tried the shortcut i was asked if i wanted to delete the shortcut as it was no longer useable. I agreed and hit the delete button.
I lost itunes completely but found the whole thing in the recycle bin. I clicked to restore itunes to its original place and it moved back but i still have no shortcut or have found any other way to startup itunes.
Can anyone help?
Andy

If the device is not being detected in iTunes, has a different USB port or sync cable been tried? What about a reboot of the comptuer?
As for pictures/videos taken with the device, they are designed to be copied to a computer on a regular basis. Did you choose to not do this prior to attempting the update? They may be lost at this point (although they should be in the backup, but no guarantees).

After an update, iTunes no longer works

I'm sorry for such a long story. Several weeks ago, iTunes informed me of an available update. I clicked to update. The next time I open iTunes, the iTunes store no longer worked. Everything else worked fine. I solved this problem by uninstalling and reinstalling. The next time an update was available, this entirely same process happened. After finally getting everything working smoothly for several days yet another update was available. This update being 10.4.1. Fearing the same problem and not having time to deal with it, I declined the update. The next time I opened iTunes, my library no longer existed. The files are on my hard drive still so I attempted to reload them to iTunes. iTunes acts like it is loading the files but in reality is not loading them. Once it is finished, they are still not in my iTunes library. I have uninstalled and reinstalled 10 different times. I am always careful to uninstall all apple related files ie. QuickTime, Bonjour, etc... I have even gone so far as to restore my computer to a previous date. How can I fix this problem?

Don't know. Not my area of expertise. I was just trying to help in some way. You can check this:
Troubleshooting AirPlay and AirPlay Mirroring

After 10.5.6 update Mail no longer works

I just updated to 10.5.6 and now Mail (3.5) no longer works. Just before the 10.5.6 update all Mail functions were working normally. When I launch the program "Mail" appears on the menu bar but no window opens. I can select the message window from the menu bar and make it appear but it has no message list and no message content in the window. I can't make sent messages appear either. My in, sent, etc. mailboxes show on the left as usual but I can't get any messages to appear in the window for either of my mail accounts. Also, Mail won't quit without being force quit. I also did the Mail Update 10.5.6 but this didn't help. I went back and used an older 3.3 version of Mail but it won't work now either.

Hi,
Some people have reported success by trashing the preference file for Mail. Quit Mail if it is currently up and try moving this file onto your Desktop:
Hard drive -> Users -> YourUsername -> Library -> Preferences -> com.apple.mail.plist
If Mail now launches properly, reset your preferences to how you like them. If it makes no difference, quit Mail again and move the file on your Desktop back to it's original location.

Apple software update and safari not working

Apple software update says "could not connect verify a connection with the app store". Safari wont even display google. Both apps open up initially.
<Edited By Host>

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Click the Clear Display icon in the toolbar. Try the action that you're having trouble with again. Post any messages that appear in the Console window – the text, please, not a screenshot.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

After 6.1.3 Apple TV update mirroring no longer works

Similar Messages

Maybe you are looking for