After 9.1.0 update, DJ goes to 100% CPU
Windows 7, Celeron D 3.33Ghz, VIA motherboard, 2Gb ram, well over 500Gb free drive space, Vid is NVIDIA Geforce 9500GT, sound SB Audiogy.
---All drivers were updated prior to the update---
After I updated to 9.1.0, every time I try to play anything in DJ my CPU goes to 100% and iTunes grabs 1.5Gb of RAM from a couple hundred Mb. This ONLY happens using DJ regardless of the file being played. DOES NOT happen in Music, any of the play lists I've created, or when I play radio stations or pod casts or playing videos. JUST when I use DJ
* Restarting does not help
* Uninstalled /reinstalled
* Uninstalled, axed every reference in the Registry to iTunes, Apple, and Quicktime, and reinstalled
* Closed all other allowable processes, tray items, and gadgets
* Does it in Safe Mode too
I can't ask Apple for help since I don't have a spare $25 I can just blow. Anyone here have any ideas?
Message was edited by: A King
I was having the same problem with PDF files.
I tried all the suggestions.
Nothing worked correct in my case.
Finally I found a hint somewhere on internet and that solved my problem.
I opened the Diplay properties and changed the ICON SIZE (for all files) to LARGE.
Click APPLY
The PDF Icon was restored.
Again I set back the ICON SIZE to previous size (SMALL)
PDF Icon was not affected (It remained correct)
This information is for all the friends suffering like me.
O Yes. Have you installed "TweakUI (PowerToy)".
I think the PDF Icon disappeared somehow because of it.
But I am not sure.
Similar Messages
-
Has anyone seen a problem where keychain goes into 100% CPU mode for a while? During this period, it's generally unresponsive. What seems to trigger it is editting an existing password: I can erase a character or two, but then at some point, it just goes wild. It does recover eventually (a couple of minutes); a Quit fails, but a Force Quit works, after which it comes back up with no problems (though re-trying the change often triggers the problem again). Quite annoying.
I'm seeing this under 10.4.10, though it was there in several earlier 10.4.x releases. (I'm not sure how long, but I recall looking at several setsw of release notes to see if a fix was reported.) This is on a PowerPC.Safari has been known to cause cpu usage to spike. If nothing else, report the pages to Apple using "Report Bugs to Apple" under the Safari menu.
One of the Safari issues in the OS X 10.4.4 update was:
Addresses an issue in which some websites, such as www.cbsnews.com, could cause CPU usage to spike unnecessarily, or cause Safari to stop responding, unless Safari's Enable JavaScript preference was deselected.
It is possible that they didn't get it completely fixed.
I have also noticed that Safari slows down after being open for an extended period or if I have tons of tabs open, although it is not as bad as it once was. Additionally, regardless of anything else, it does appear that some sites slow down Safari's performance and/or spike the cpu usage until I close that tab. (I've had this happen to me with Firefox as well, by the way). -
Firefox 35.0.1 will not fully open in Windows 7 - mem use goes to 100% CPU to 90% & Firefox locks up
Today, Firefox 35.0.1 tries to open in Windows 7 but mem usage goes to 100%, CPU goes to 90% & Firefox along with the whole computer locks up
You can check if you can start Firefox in <u>[[Safe Mode|Safe Mode]]</u> by holding down the Shift/Options key.
You can try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
You need to close and restart Firefox after toggling this setting.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration
Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test.
*http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/ -
Safari goes to 100% CPU and stays there on certain websites
I got a new computer a month or two ago (a Powerbook 1.67), and used apple's migration assistant to transfer all my stuff over from that comp to this one. Ever since I've started using the comp, when I use safari to load certain pages or parts of pages, such as www.mapquest.com (when I try to type in the directions from/to box, or try to load recent searches) or www.orbitz.com (any time I'm on the results screen once I've searched for a flight or some such), the CPU load goes to 100%, and stays there until I close the tab with that site in it (even with safari in the background), and anything else I try to do until the tab is closed runs like molasses. This definitely did not ever happen with my old Powerbook 867, but I don't recall installing any new safari extensions or plug-ins since I got the new computer, so I'm somewhat mystified as to what is causing it. Do you guys have any thoughts as to what it might be, or suggestions as to how best to go about figuring it out?
Thanks for any help you can provide.Safari has been known to cause cpu usage to spike. If nothing else, report the pages to Apple using "Report Bugs to Apple" under the Safari menu.
One of the Safari issues in the OS X 10.4.4 update was:
Addresses an issue in which some websites, such as www.cbsnews.com, could cause CPU usage to spike unnecessarily, or cause Safari to stop responding, unless Safari's Enable JavaScript preference was deselected.
It is possible that they didn't get it completely fixed.
I have also noticed that Safari slows down after being open for an extended period or if I have tons of tabs open, although it is not as bad as it once was. Additionally, regardless of anything else, it does appear that some sites slow down Safari's performance and/or spike the cpu usage until I close that tab. (I've had this happen to me with Firefox as well, by the way). -
After 10.5.3 Update, System Events at 50% CPU
After updating to 10.5.3, activity monitor is showing that System Events is using 50% of the CPU pretty constantly for about 5-10 minutes right after I login, then finally turns off. Any ideas on what might be going on?
After updating to 10.5.3, activity monitor is showing that System Events is using 50% of the CPU pretty constantly for about 5-10 minutes right after I login, then finally turns off. Any ideas on what might be going on?
-
Mail goes to 100% CPU and becomes unresponsive on one e-mail
Until this morning, I've had no problems with Mail. A business associate sent me an e-mail as a reply to a conversation spanning several weeks with a small PDF attachment. When I went to read the e-mail on my MacBook Pro, Mail became unresponsive with the "loading panel" twirling in the e-mail pane. CPU load went to 100% and remained there. I found that if I clicked on another mailbox, eventually (minutes later) it would become selected and CPU load would drop back down to normal. Tried it several times with the same results.
My mail server filters out spam and forwards all e-mails to my gmail account so that I have all of my e-mails on my iPhone. I found the offending e-mail on my iPhone and found that it opened just fine and the attachment opened fine too. Thinking that the e-mail had somehow become corrupted, I deleted it from my MacBook Pro then forwarded the message from my iPhone to the account used by my MacBook Pro. When I went to read the forwarded e-mail on my MBP, the same problem occurred. From what I can see in my iPhone there's nothing unusual about the e-mail, just some text and the small PDF attachment. I can open other e-mails with PDF attachments fine. It's just this one e-mail that gives Mail a problem.
Here's what I've done so far:
Using Disk Utility, I did a repair on my MBP volume - no problems found.
I did a permissions repair - nothing unusual.
I did a rebuild on all of my mail folders - everything went okay.
I disabled and uninstalled Letter Opener Pro (the only plug-in I use with Mail)
I disabled Norton.
Still no joy. I realize I can just delete the e-mail and go on with life but ideally I would like to be able to solve the problem so it doesn't happen again. Has anyone else had this problem and if so, how did you solve it?Safari has been known to cause cpu usage to spike. If nothing else, report the pages to Apple using "Report Bugs to Apple" under the Safari menu.
One of the Safari issues in the OS X 10.4.4 update was:
Addresses an issue in which some websites, such as www.cbsnews.com, could cause CPU usage to spike unnecessarily, or cause Safari to stop responding, unless Safari's Enable JavaScript preference was deselected.
It is possible that they didn't get it completely fixed.
I have also noticed that Safari slows down after being open for an extended period or if I have tons of tabs open, although it is not as bad as it once was. Additionally, regardless of anything else, it does appear that some sites slow down Safari's performance and/or spike the cpu usage until I close that tab. (I've had this happen to me with Firefox as well, by the way). -
Xcode goes to 100% CPU if I try to save a file
Xcode 4 hangs on me when I try to save an xcdatamodel file. I see that someone else reported this issue (http://www.openradar.me/9379818) and I'm wondering if this is a known problem.
4.0.2 Build 4A2022a
Exactly which version Xcode?
I only have one project that uses this stuff.
All similar projects or just the one?
Posting on this forum to see if anyone has any ideas! Note that (as I mentioned in the original posting) this issue was reported in detail by someone else as well (http://www.openradar.me/9379818). Seriously though, I really didn't want to have to invest a ton of my own time if somebody else has already figured out this issue.
I'm going to try uninstalling and reinstalling....you know, same kind of thing one normally only has to do on MS Windows (grin)
What have you done to fix it?
Yeah, well based on my previous experiences with doing that for other Apple professional products that I own, that plus a dollar will get me a cup of coffee (sigh)
You'd have to file your own bug w/Apple and see if it comes back as known. -
After starting up the listener the server consuming 100% CPU
Hi,
when i startup the database tier (EBS 12.1.3 and DB 11.2.0.2) its stared well and the CPU usage is normal.But when i start the listener the server (RHEL 5.8) start consuming 100% CPU.
alert.log details
in file /ebs/UAT/bin/db/tech_st/11.2.0/admin/UAT_dcvlodbdev/diag/rdbms/uat/UAT/trace/UAT_j000_7601.trc:
ORA-00600: internal error code, arguments: [13011], [262414], [1644193998], [33], [1644194002], [0], [], [], [], [], [], []
ORA-06512: at "APPS.WF_BES_CLEANUP", line 488
ORA-06512: at line 1
Wed Dec 12 10:11:33 2012
Sweep [inc][480592]: completed
Wed Dec 12 10:13:17 2012
Errors in file /ebs/UAT/bin/db/tech_st/11.2.0/admin/UAT_dcvlodbdev/diag/rdbms/uat/UAT/trace/UAT_j001_7624.trc (incident=480612):
ORA-00600: internal error code, arguments: [13011], [262414], [1644193998], [33], [1644194002], [0], [], [], [], [], [], []
Use ADRCI or Support Workbench to package the incident.
See Note 411.1 at My Oracle Support for error and packaging details.
Errors in file /ebs/UAT/bin/db/tech_st/11.2.0/admin/UAT_dcvlodbdev/diag/rdbms/uat/UAT/trace/UAT_j001_7624.trc:
ORA-00600: internal error code, arguments: [13011], [262414], [1644193998], [33], [1644194002], [0], [], [], [], [], [], []
ORA-06512: at "APPS.WF_BES_CLEANUP", line 488
ORA-06512: at line 1
Wed Dec 12 10:13:18 2012
Sweep [inc][480612]: completed
Wed Dec 12 10:14:18 2012
Errors in file /ebs/UAT/bin/db/tech_st/11.2.0/admin/UAT_dcvlodbdev/diag/rdbms/uat/UAT/trace/UAT_ora_7814.trc (incident=481092):
ORA-00600: internal error code, arguments: [kdsgrp1], [], [], [], [], [], [], [], [], [], [], []
Incident details in: /ebs/UAT/bin/db/tech_st/11.2.0/admin/UAT_dcvlodbdev/diag/rdbms/uat/UAT/incident/incdir_481092/UAT_ora_7814_i481092.trc
Wed Dec 12 10:14:23 2012
Dumping diagnostic data in directory=[cdmp_20121212101423], requested by (instance=1, osid=7814), summary=[incident=481092].
Use ADRCI or Support Workbench to package the incident.
See Note 411.1 at My Oracle Support for error and packaging details.
Wed Dec 12 10:14:24 2012
Sweep [inc][481092]: completed
Sweep [inc2][481092]: completed
Wed Dec 12 10:16:50 2012
Errors in file /ebs/UAT/bin/db/tech_st/11.2.0/admin/UAT_dcvlodbdev/diag/rdbms/uat/UAT/trace/UAT_j001_8058.trc (incident=481492):
ORA-00600: internal error code, arguments: [13011], [262414], [1644193998], [33], [1644194002], [0], [], [], [], [], [], []
Use ADRCI or Support Workbench to package the incident.
See Note 411.1 at My Oracle Support for error and packaging details.
Errors in file /ebs/UAT/bin/db/tech_st/11.2.0/admin/UAT_dcvlodbdev/diag/rdbms/uat/UAT/trace/UAT_j001_8058.trc:
ORA-00600: internal error code, arguments: [13011], [262414], [1644193998], [33], [1644194002], [0], [], [], [], [], [], []
ORA-06512: at "APPS.WF_BES_CLEANUP", line 488
ORA-06512: at line 1
Wed Dec 12 10:19:04 2012
Incremental checkpoint up to RBA [0xf.ac257.0], current log tail at RBA [0xf.c3691.0]
Wed Dec 12 10:20:56 2012
Active Session History (ASH) performed an emergency flush. This may mean that ASH is undersized. If emergency flushes are a recurring issue, you may consider increasing ASH size by setting the value of ASHSIZE to a sufficiently large value. Currently, ASH size is 2097152 bytes. Both ASH size and the total number of emergency flushes since instance startup can be monitored by running the following query:
select total_size,awr_flush_emergency_count from v$ash_info;
Wed Dec 12 10:21:26 2012
Sweep [inc][481492]: completedPlease see these docs.
ORA-600/ORA-7445/ORA-700 Error Look-up Tool [ID 153788.1]
ORA-600 [13011] "Problem occurred when trying to delete a row" [ID 28184.1]
Workflow Control Queue Clean Up Program Fails With ORA-25226 [ID 334237.1]
Thanks,
Hussein -
after the last Yosemite update on my MacBook pro I turned the FileVault on, now my Mac is freezing all the time and encrypting the drive looks like going to last forever and I am unable to use my MacBook pro what must I do???!!!
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA\(|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
After 10.9.6 update, laptop keeps going to sleep
After doing the 10.9.6 updates last night, my computer keeps going to sleep, even right in the middle of typing, the screen goes black and the lights on the keyboard go off. I have to hit a key on the keyboard or tap the touchpad to wake it back up, and re-enter my password. I am also running os x server installed on this laptop and did that update, along with xcode 6
Here are my logs from the console:
9/20/14 11:10:56.482 AM loginwindow[495]: ERROR | -[LWBuiltInScreenLockAuthLion askForPasswordBuiltIn:] | Attempted to add an observer when already observing
9/20/14 11:10:56.679 AM WindowServer[127]: CGXDisplayDidWakeNotification [1530601644632]: posting kCGSDisplayDidWake
9/20/14 11:10:56.680 AM WindowServer[127]: handle_will_sleep_auth_and_shield_windows: Deferring.
9/20/14 11:11:06.484 AM loginwindow[495]: CoreAnimation: warning, deleted thread with uncommitted CATransaction; set CA_DEBUG_TRANSACTIONS=1 in environment to log backtraces.
9/20/14 11:11:09.043 AM loginwindow[68]: CoreAnimation: warning, deleted thread with uncommitted CATransaction; set CA_DEBUG_TRANSACTIONS=1 in environment to log backtraces.
9/20/14 11:11:09.085 AM loginwindow[68]: CoreAnimation: warning, deleted thread with uncommitted CATransaction; set CA_DEBUG_TRANSACTIONS=1 in environment to log backtraces.
9/20/14 11:11:26.601 AM WindowServer[127]: _CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
9/20/14 11:11:26.602 AM loginwindow[68]: find_shared_window: WID -1
9/20/14 11:11:26.602 AM loginwindow[68]: CGSGetWindowTags: Invalid window 0xffffffff
9/20/14 11:11:26.602 AM loginwindow[68]: find_shared_window: WID -1
9/20/14 11:11:26.602 AM loginwindow[68]: CGSSetWindowTags: Invalid window 0xffffffff
9/20/14 11:11:26.669 AM WindowServer[127]: device_generate_desktop_screenshot: authw 0x7fbd68432cf0(2000), shield 0x7fbd68578280(2001)
9/20/14 11:11:26.688 AM WindowServer[127]: device_generate_lock_screen_screenshot: authw 0x7fbd68432cf0(2000), shield 0x7fbd68578280(2001)
9/20/14 11:11:27.783 AM loginwindow[495]: ERROR | -[LWBuiltInScreenLockAuthLion askForPasswordBuiltIn:] | Attempted to add an observer when already observing
9/20/14 11:11:27.979 AM WindowServer[127]: CGXDisplayDidWakeNotification [1561902351016]: posting kCGSDisplayDidWake
9/20/14 11:11:27.980 AM WindowServer[127]: handle_will_sleep_auth_and_shield_windows: Deferring.
9/20/14 11:11:39.821 AM loginwindow[68]: CoreAnimation: warning, deleted thread with uncommitted CATransaction; set CA_DEBUG_TRANSACTIONS=1 in environment to log backtraces.
9/20/14 11:11:49.770 AM loginwindow[68]: CoreAnimation: warning, deleted thread with uncommitted CATransaction; set CA_DEBUG_TRANSACTIONS=1 in environment to log backtraces.
9/20/14 11:11:57.884 AM WindowServer[127]: _CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
9/20/14 11:11:57.885 AM loginwindow[68]: find_shared_window: WID -1
9/20/14 11:11:57.885 AM loginwindow[68]: CGSGetWindowTags: Invalid window 0xffffffff
9/20/14 11:11:57.886 AM loginwindow[68]: find_shared_window: WID -1
9/20/14 11:11:57.886 AM loginwindow[68]: CGSSetWindowTags: Invalid window 0xffffffff
9/20/14 11:11:57.976 AM WindowServer[127]: device_generate_desktop_screenshot: authw 0x7fbd68739610(2000), shield 0x7fbd68578280(2001)
9/20/14 11:11:57.984 AM WindowServer[127]: device_generate_lock_screen_screenshot: authw 0x7fbd68739610(2000), shield 0x7fbd68578280(2001)
9/20/14 11:11:58.056 AM WindowServer[127]: _CGXHWCaptureWindowList: No capable active display found.
9/20/14 11:11:58.957 AM loginwindow[495]: ERROR | -[LWBuiltInScreenLockAuthLion askForPasswordBuiltIn:] | Attempted to add an observer when already observing
9/20/14 11:11:59.150 AM WindowServer[127]: CGXDisplayDidWakeNotification [1593074141698]: posting kCGSDisplayDidWake
9/20/14 11:11:59.151 AM WindowServer[127]: handle_will_sleep_auth_and_shield_windows: Deferring.
9/20/14 11:12:08.898 AM Dock[526]: CoreAnimation: warning, deleted thread with uncommitted CATransaction; set CA_DEBUG_TRANSACTIONS=1 in environment to log backtraces.
9/20/14 11:12:09.005 AM loginwindow[495]: CoreAnimation: warning, deleted thread with uncommitted CATransaction; set CA_DEBUG_TRANSACTIONS=1 in environment to log backtraces.
9/20/14 11:12:10.905 AM loginwindow[68]: CoreAnimation: warning, deleted thread with uncommitted CATransaction; set CA_DEBUG_TRANSACTIONS=1 in environment to log backtraces.Resetting SMC doesn't work
Apple is dying
After 10.9.5 update,
1. Go to sleep
2. Wake up from sleep
3. After step 2, macbook keeps going to sleep per 5 to 20 seconds
4. After restart, back to normal
1 > 2 > 3 > 4 > 1 > 2 > 3 > 4 >... -
After 10.9.5 update, macbook keeps going to sleep
After 10.9.5 update,
1. Go to sleep
2. Wake up from sleep
3. After step 2, macbook keeps going to sleep per 5 to 20 seconds
4. After restart, back to normal
1 > 2 > 3 > 4 > 1 > 2 > 3 > 4 >...Intel-based Macs: Resetting the System Management Controller (SMC)
-
When I update an app it asks for my password (as usual) but now there is no touch keyboard or other way to enter the password. This problem started, I think, after the latest OS update.What's going on?
I tried a reset and it did the trick.
-
my 3rd generation ipad even though my battery is at 100 % the screen goes black after sitting for more than 15 mins. The only way to get it to come is by resetting the ipad. Is there a fix for this. It all started after the last two updates.
Try a Reset...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
If no joy... Try a Restore...
1: Connect the device to your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
From Here
Unresponsive iPad
http://support.apple.com/kb/TS3281 -
After logic board replacement and software update, MacBook Pro is spontaneously shutting down and preventing restart. Inconsistent ability to restart after multiple tries. What is going on?
Hard drive sensor or logic board failure.
Try a SMC Reset, only thing I can help.
http://support.apple.com/kb/ht3964
Check your tones with this sounds like it's not recognizing the RAM, perhaps it's not seated well or making a bad connection or it's defective.
http://support.apple.com/kb/ht1547
Take it back. three times a charm -
Iphone 5 issues after IOS 8.2 update: all the iphones in the house receive the same phone calls ONLY while we are at home. Any ideas on how to fix this?
That is a new "feature" described in Connect your iPhone, iPad, and iPod touch using Continuity
You can turn it off by going to Settings > FaceTime and changing "iPhone Cellular Calls" to off
Maybe you are looking for
-
ERROR in SAP System Installation
Hi gurus!! We are trying to install a SRM system (EBP4.0) into existing database (oracle 9.2) - MCOD mode - but when we run the installation the process terminates with the next error in sapinst.log ERROR 2008-08-29 11:16:50 CJS-00084 SQL Statement
-
Can i seperate my main account into different accounts for different users and still share songs and apps that we already have?
-
I can no longer hear any sound from my speakers/headphones. This happened suddenly yesterday without any hardware changes or noticeable software updates. -- The sound is not muted and the volume is set to full. -- In the device manager, my SigmaTel H
-
Error FFFFFFFE: FPGA Signature doesn't match
Hi, I am using 5640R. When I tried to run the "ni5640R Analog Input" example, the first time would be okay, but the next time will fail with an error FFFFFFFE. The source is "private_5640_signature Register Verify.vi" and the message is "FPGA Signatu
-
hi all, Can anybody tell a case where we can jus use a idoc and cannot use a PSA? are there any cases like this? is there any real time example where we can use only idoc.? Thanks in advance, Indudhar