After a clean install of Yosemite, the App Store is asking me to update to Beta 5.

I was running the public betas, updated all the way to beta 6. When Yosemite was released last week, I backed up my computer with Time Machine, and erased the disk. I installed Yosemite as a new installation. Shortly after, the App Store is telling me I can update to Beta 5, despite having the latest 'full' release.
Image here: https://www.dropbox.com/s/k8mv6zxk7tjvxs3/Screenshot%202014-10-20%2016.27.58.png ?dl=0

Yes even if it is installed it will still show in the Purchases section/area so if needed you can download it again.
This was a Problem with Lion. After people bought and installed Lion if they went back to the MAS to say download it again to another Mac they owned, which it totally legal, Lion did not show in the purchases area and in the main MAS area it was displayed with a BUY button. You had to hold down the Option key, I think it was, for the Buy button to turn to a Download, or something, button. It was very confusing. Apple is trying to clear that up by placing Mt Lion in your Purchases area so if you wanted to Re-Download it on your computer or another that you own you can easily.
If you click that Download button in the Purchases area of the MAS it may ask you for your Apple ID and password or just your password but it will not charge you for it again.
Has that helped?

Similar Messages

  • After a clean install of Yosemite in iCloud remained links, which were opened in Safari on the Mavericks

    After a clean install of Yosemite in iCloud remained links, which were opened in Safari on the Mavericks.
    Please help remove old and obsolete references to iCloud for Safari.

    Hi leonie,
    It looks like once my computer was subject to a clean install of OSX Mavericks, programs installed with iLife, i.e. iWeb, GarageBand. iPhoto, etc, were removed from my HD and cannot now be reinstalled.. I form the impression that they are not on the installation DVD's that shipped with my computer, and having examined the disks by placing them in my machine, there is no way I can tell whether that is correct, since there is no 'button' that allows me to look for their presence on the disks.
    If you can shed any light on that conclusion, I'd be grateful for any advice you could offer. I guess it's not super imperitive that I have GarageBand '09, I can get by without it, but it would have been nice to have, and a couple of my songs use loops that were from GB '09, and these are now absent from the songs when played back in GB X. Of course, I cannot download the '09 version from the App store. Looks like Apple has me borked!
    Thanks for your help, anyway, I'm always pleased to see your name here..
    Regards, Ontradio..

  • Hello I formatted my iMac today and wanted to download iphoto again but after i press the button to install it in the app store nothing happens! same with the yosemite upgrade..

    Hello I formatted my iMac today and wanted to download iphoto again but after i press the button to install it in the app store nothing happens! same with the yosemite upgrade.. In the iPhoto ratings there are alot of other people facing this problem I hope somebody can help me. thank you in advance

    If you have OS X 10.6.8 as you state you can not get iphoto form the App store - you must have Yosemite OS X 10.10. installed to download iphoto 9.6 from the App store
    If Nothing happens then you need to contact App store support - link is on the right of the App store window
    LN

  • My installation of Lightroom 5 on Windows 7 Desktop gives me an "Installation Failed - Learn More" after trying to install it on the apps page... how do I fix it so I can install Lightroom?

    My installation of Lightroom 5 on Windows 7 Desktop gives me an "Installation Failed - Learn More" after trying to install it on the apps page... how do I fix it so I can install Lightroom?

    Link for Download & Install & Setup & Activation problems may help
    -Online Chat http://www.adobe.com/support/download-install/supportinfo/

  • Why won't iPhoto download after i have bought it from the app store and installed mavericks

    why won't iPhoto download after i have bought it from the app store and installed mavericks?

    Sorry no mind readers here so you have to tell us details, context and any error messages - just stating an abstract problem that could have thousands of causes is not enough
    What version of iPhoto? Of the OS? what has changed since it worked? How are you trying to open it (clicking on the icon in the Dock, double clicking on the application in the applications folder, ???)?
    Anything else you can tell a total stranger who can not see you or your computer to let them assist you?
    LN

  • I have Snow leopard, 10.6.8 on my iMac, I just tried to install Lion from the App store, but during proces, the install stops after one minute saying: "software might be damaged". I downloaded the software again, same thing. What must I do to install Lion

    I have Snow leopard, 10.6.8 on my iMac, I just tried to install Lion from the App store, but during proces, the install stops after one minute saying: "software might be damaged". I downloaded the software again, same thing. What must I do to install Lion? I have still 487GB free.

    Quit all other programs and open Disk Utility
    Select your "MacintoshHD" drive on the left and indented and click Erase > Erase Free Space > Zero and let it complete.
    Also run First Aid > Repair Disk and permisisons.
    If Repair disk gives a error, you have a bigger problem, if repair permisisons fixes and completes, even if it fixes the same thing twice if you click it again, it's ok. Apple just changed things.
    You should be able to download the file sucessfully this time, if not, take it to another location with better/faster internet.
    If not then run through this list
    Step by Step to fix your Mac

  • WHen I first installed iOS 6 the App Store crashes...and now having iOS 6 for 2 weeks now, all my apps are buggy and now are crashing! Safari and built in apps are becoming slow and crash. I hate how apple leaves iPod touch 4g and iPhone 4 in the dark.

    WHen I first installed iOS 6 the App Store crashes...and now having iOS 6 for 2 weeks now, all my apps are buggy and now are crashing! Safari and built in apps are becoming slow and crash. I hate how apple leaves iPod touch 4g and iPhone 4 in the dark and basically force us to upgrade to newer devices. Apple could of done better with the update and needs to resolve these issues.

    Try:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    The App store crashing is a known problem.
    IOS 6 App store crash: Apple Support Communities

  • Hello everyone!  i have a new macbook pro and i want to download aperture.  my app store says it is already installed (on my old macbook pro).  how do i install aperture from the app store in this instance please?

    hello everyone!  i have a new macbook pro and i want to download aperture.  my app store says it is already installed (on my old macbook pro).  how do i install aperture from the app store in this instance please?

    Are yoy sure that Apeture is not in the Applications folder of the new system? If it is move it to the trash and the App Store will let you download Aperture from it.
    You will need to make sure you use the same Apple ID you used to purchase it in the past.
    regards

  • After upgrading to 10.9.5, the App Store "Update" button stopped working.

    After upgrading from 10.9.4 to 10.9.5 tonight, the App Store "Update" button seems to have stopped working.  The App Store says I have one update available (Xcode version 6.0.1), but when I click "Update," the button turns white for a few seconds, and then it turns back to gray without doing anything.  I've tried the same steps after restarting my computer twice.
    A screen shot is below.

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • Microsoft Office 2011 no longer opens because "there is a problem" after updating mountain lion when the app store said there was an update available this morning. Reinstalling did not work. What's the problem?

    Microsoft Office 2011 no longer opens because "there is a problem" after updating mountain lion when the app store said there was an update available this morning. Reinstalling did not work. What's the problem?

    Has your problem been solved by the updates??
    Have a similar problem. This MacBook opened all MS Office programs in Dec2012 but no longer does in Feb2013. Went to Microsoft/mac/downloads but none of the three updates would run citing a problem "version of software needed to run this update was not found on this volume".
    MacBook: 7.1, Intel Core 2 Duo, 2.4 GHz
    Microsoft Office 2011:  version 14.2.3
    Mountain Lion: 10.8.2 (12C60)

  • I installed Aperture from the App Store, it was working ok, then suf=ddenly it wont load, I get the "Aperture encountered problem" message, have updated all OSX and Aperture but I still cant get it to work, any ideas ?

    I installed Aperture from the App Store, it was working ok, then suf=ddenly it wont load, I get the "Aperture encountered problem" message, have updated all OSX and Aperture but I still cant get it to work, any ideas ?

    I installed Aperture from the App Store, it was working ok, then suf=ddenly it wont load, I get the "Aperture encountered problem" message, have updated all OSX and Aperture but I still cant get it to work, any ideas ?

  • Why app store keep asking me to update when i deleted the app

    app store alert me to update the app ... i never use this app and i deleted the app...
    but app store still has the alert red sign on the app store ... why this is still on since i deleted the app?...
    i used cleanapp to remove the app ... is it the removal is not 100% or else?...
    please advise for a solution...
    thanks...

    You may have installed a hacked app, originally from the Mac App Store. It contains the receipt for a different app, downloaded using an account that you don't control. You need to identify and remove the hacked app.
    Important: The app you need to remove is not necessarily the one named in the App Store alert. For example, if the App Store says you need to update "Twitter," the hacked app may be "Angry Birds" or something else entirely. Don't make any assumptions about which app you're looking for. To find it, you have to carry out a systematic search.
    Triple-click anywhere in the line of text below on this page to select it:
    kMDItemAppStoreHasReceipt=1
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    In the Finder, press command-F to open a search window, or select
    File ▹ Find
    from the menu bar. In the search window, select
    Search: This Mac
    from the row of tokens below the toolbar. Below that is a popup menu initially showing Kind. From that menu, select  Other...
    A sheet will drop down. In that sheet, select Raw Query and click OK or press return.
    Now there will be a text box to the right of popup menu. Click in that box and paste (command-V).
    The search window will show all the App Store products you've installed. Compare those search results with the list of your purchases from the App Store. To see the complete list, you may need to unhide hidden purchases. If any apps were download from the App Store using other Apple ID accounts that you control, sign in to the store under each of those ID's and check the purchases.
    At least one of the items listed in the search window is not among your purchases in the App Store. Move each such item to the Trash. You may be prompted for your administrator password. Empty the Trash.
    Log out and log back in. Test.

  • I have Flashplayer 11.6.6 installed.  Yet the pop-up keeps asking me to update.

    I have Flashplayer 11.6.6 installed.  Yet the pop-up keeps asking me to update.   How do I tell it the player is already installed?

    My operating system is Mac OSX, version 10.6.8.  I use Safari, version 5.1.8.  I realize the latest version of Flash is 11.6.602, but when I typed my question to you, I could only remember 11.6.6.  It was 11.6.602.180 that I had tried to download. and thought I did download and install, until the pop-up said I need the latest version of Flash.  Unless I try again, I can't get the screen shot of the pop-up.  I will try after the holiday to send you that.
    Thanks,
    Mary

  • I am unable to update to Mavericks as I am prompted to sign in to an unknown gmail account on the App Store, I am unable to update to Mavericks as I am prompted to sign in to an unknown gmail account on the App Store

    I am trying to update to Mavericks and I am unable to since I prompted with a message to sign in to an unknown account.
    Can anybody help ?

    You installed a hacked app, originally from the Mac App Store. It contains the receipt for a different app, downloaded using an account that you don't control. You need to identify and remove the hacked app.
    Important: The app you need to remove is not necessarily the one named in the App Store notice. For example, if the App Store says you need to update "Twitter," the hacked app may be "Angry Birds" or something else entirely. Don't make any assumptions about which app you're looking for. To find it, you have to carry out a systematic search.
    Triple-click anywhere in the line of text below on this page to select it:
    kMDItemAppStoreHasReceipt=1
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    In the Finder, press command-F to open a search window, or select
    File ▹ Find
    from the menu bar. In the search window, select
    Search: This Mac
    from the row of tokens below the toolbar. Below that is a popup menu initially showing Kind. From that menu, select  Other...
    A sheet will drop down. In that sheet, select Raw Query and click OK or press return.
    Now there will be a text box to the right of popup menu. Click in that box and paste (command-V).
    The search window will show all the App Store products you've installed. Compare those search results with the list of your purchases from the App Store. To see the complete list, you may need to unhide hidden purchases. If any apps were download from the App Store using other Apple ID accounts that you control, sign in to the store under each of those ID's and check the purchases.
    At least one of the items listed in the search window is not among your purchases in the App Store. Move each such item to the Trash. You may be prompted for your administrator password. Empty the Trash.
    Log out and log back in. Test.

  • NSURLErrorDomain error -1012 keeps coming up when I go to the app store to check for any updates.

    When I go to the App store to check for any updates it will not proceed and gives me the following error message NSURLErrorDomain  error 1012.
    Can anybody help please.
    Thanks,
    Bernard

    I am receiving the same error when I try to refresh the updates page but was able to download the Digital Camera Raw update without issue (this update was displayed on the page).
    Have not tried the 10.9.3 update...
    Curt

Maybe you are looking for

  • Restricting Re-ATP while copying from Quotation to sales order

    How to restrict availability chek in R/3 ? Our scenario is :- If SO is created in reference to quotation for A rank customer then availability check Should not happen . Although If SO is created in reference to quotation for B/C rank customer then av

  • I am unable to install itunes for windows 7

    I am unable to install itunes for windows 7.I want to import audio material to my iphon4s from my lap top

  • Images not displaying when JAR alone running

    HI all, I am developing Standalone application using swings in netbeans,everthing is working fine when i run using IDE,if i took the jar alone and tried to run,it is throwing Exception,it is throwing exception at the time of displaying images. i kept

  • Photo Organizer app

    Hi, can anyone recommend a photo organizer app they have used (particularly since the IOS6 update).   I know about Photo Manager Pro but I just want a simple app that allows me to put my photos in folders and there are tons of apps but can anyone rec

  • Controlling workflow triggering

    Hi I have a workflow for PO approval release process. It gets triggered whenever a new PO is created and whenever a PO is modified. But I want a control on the workflow, when there is a change in the existing PO. In otherwords if change in the total