After a deployment which includes Power Manager, get a RunDLL error referring to "C:\Program"

If you get an error after rebooting from your deployment titled "RunDLL" with a message of "There was a problem starting C:\Program The specified module could not be found.", then check your deployed system for short names by doing a "dir C:\ /x" at a command prompt. If there is no short name (the old 8.3 format) defined for C:\Program Files (x86) then this is the issue.
It seems that with the latest introduction of tools from MS in the ADK you can find yourself with a system that does not have short names defined for some key folders such as C:\Program Files (x86). This can happen if you use the very latest ADK tools to format your drive during deployment. The default has been changed to turn off 8.3 name creation. The issue can be avoided by adding an addition Run Command item in the task sequence. After the step for partitioning the drive, add a task to run the following command:
"fsutil.exe 8dot3name set x: 0" (where x: is the drive letter to enable 8.3 naming on)
You can find more details here: http://scug.be/sccm/2013/01/15/configmgr-2012-sp1-the-8dot3name-settings-are-disabled-on-the-volumes...

ok I found solution, the problem is with last update
http://forums.lenovo.com/t5/ThinkVantage-Technologies/Lenovo-Settings-Dependency-Package-1-2-0-21-do...

Similar Messages

After an update to firefox I keep getting a warning from my Firewall (McAfee) "Program wants internet access". I have permission set at outgoing for firefox and updates checking off, to check that request is valid so what does it need access for

After an update to firefox I keep getting a warning from my Firewall (McAfee) "Program wants internet access". I have permission set at outgoing for firefox and updates checking off, to check that request is valid so what does it need access for

This was not a Firefox update, but a piece of malicious software you have inadvertently downloaded from a site called http://ffftp.co.cc/ which is impersonating Firefox. I discovered this as soon as my Zonealarm requested permission for "Golds" to access the internet. Golds??!! However I couldn't find a file with this name installed on my computer.
You should delete the file you downloaded and certainly do not allow internet access to any suspicious program. If you have already given permission, scan your PC immediately for any virus, malware, etc. Best of luck.

HT1212 my iphone is locked in iphone recovery mode after I restored it and now I get an unknown error (3004)

my iphone is locked in iphone recovery mode after I restored it and now I get an unknown error (3004)

http://support.apple.com/kb/TS3694#communication

TS3694 I'm running XP. After downloading the latest itunes update i get a "Runtime error" and can't start itunes. Help?

I'm running XP. After downloading the latest itunes update i get a "Runtime error" and can't start itunes. Help?

iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue
Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process.

All of a sudden my iTunes stopped working, and I get the following error messages: 1. the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem and 2. iTunes was not installed correct

All of a sudden my iTunes stopped working, and I get the following error messages:
1. the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem
and
2. iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126).
Now I've checked the forums and followed the advice of uninstalling all Apple applications, rebooting, and reinstalling iTunes.
This is not working. I've tried installing as Administrator but doesn't make any difference at all.
There must be a way to fix this? I'm not a tech geek but I want to avoid having to take my laptop back to factory settings to sort this out.
Thanks

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99192)

From which table could i get all the Variants of a ABAP program?

Hi,
From which table could i get all the Variants name which belong to a specific ABAP program?
Thanks.

Hi Hoo,
You can get the variants of a ABAB Program from table <b>VARID</b>. Give the report name to the VARID-REPORT field and you will the list of variants for this report under field VARID-VARIANT and VARID-ENAME is the user who created the variant.
Otherwise, You can use the function module RM_GET_VARIANTS_4_REPORT_USER to get the variants of a report
Thanks,
Vinay

Gnome power manager upgrade - nvidia sedmentation error

I am trying to use the rolling update model properly and check the web page for issues before doing my pacman Syu.
I updated gnome-power-manager (along with the other available updates) today amd immediately noticed different behaviour.
The laptop (Dell Inspiron 1720) no longer suspended when I shut the lid. I still had the shutdown menu option but... when I used it it intermittently caused segmentation fault errors in nvidia settings and stuff like Google Earth no longer worked. My graphics card is geForce 8600M GT.
Downgrading the gnome-power-manager package restored everything to working order.
Maybe I did something daft, but I'd like to know if there is something else I should have checked or if there is a problem with this package. In the meantime I've added it to IgnorePkg

i just pointing out that you can try to fix it yourself(until is fixed in our repo) by compiling gnome-power-manager using abs and add that option to the ./configure within PKGBUILD.
Last edited by wonder (2009-04-14 20:26:39)

Why do I sometimes get a Rundll error message

Sometimes I get a Rundll message...What is Rundll?
duplicate of [/questions/911572]

Back up all data.
Unlock the Network preference pane, if necessary, by clicking the lock icon in the lower left corner and entering your password. Cllck Advanced, open the DNS tab, and change the server addresses to the following:
8.8.8.8
8.8.4.4
That's Google DNS. Click OK, then Apply.
In Safari, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. If you’re using another browser, empty the cache. Test. Any difference?
Notes:
1. If you lose Internet access after making the above change to your network settings, delete the Google servers in the Network preference pane, then select the TCP/IP tab and click Renew DHCP Lease. That should restore the original DNS settings; otherwise restore them yourself. Remember that you must clickApply in order for any changes to take effect.
2. I don't use Google DNS myself, though I have tested it, and I'm not recommending it or any other DNS provider; the server addresses are offered merely for testing purposes. There may be privacy and technical issues involved in using that service, which you should investigate personally before you decide whether to keep the settings. Other public DNS services exist.

I am trying to install itunes after downloading Windows 8.1. I get an Windows Error 2 message-- "Apple Application Support is required to run itunes helper." Any suggestions?

I am trying to install itunes (64 bit) after downloading Windows 8.1 on my HP Laptop. I keep getting an error message Windows Error 2--"Apple App;ication Support is required to run itunes helper" Does anyone have any simple suggestions for a user with limited knowledge of Computers?

With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, see if iTunes will launch without the error now.
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

After restoring 120 Gig Ipod classic, Keep getting random Sync errors?

So, I was using a third party software called Media Monkey to tag some album art on my ipod. For whatever reason my the program kept closing out and crashing. Eventually it crashed so hard that it wiped my entire library of music. After some failed attempts to save my music by taking it off of the hidden ipod_Control folder, I gave up and restored it. After the restore, whenever I attempt to add music I keep getting random numbered sync errors (for example -50, -1303.-69,-53). This is only after I add about 3 or 4 gigs of space. (I tired re adding the music album by album and still have the same issue after only 2 gigs of space.) I have NEVER had a problem with this ipod before, it's not even 4 months old yet so i'm not sure what is going on here. I have called apple three times (all i'm told is if I want actually help and not articles that i've already used, I have to pay.) I have tired making it a disk drive but itunes still treats my ipod like it's an ipod and not a disk drive. Any help would be REALLY nice. Thank you for reading! I've also restore my ipod multiple times as well.

Hopefully it is only a filesystem corrupted by conflicting Apps.
Try to fix the iPod filesystem, using Properties->Tools->error checking.
Then Restore the iPod.
if then doesn't work, do the iPod Disk Diagnostics, as posted by tt2, it wont fix your problem , but helps in troubleshooting.
Good Luck!

After upgrading to iTunes 10.2 I get a constant error code

Hello,
Everything was just working perfectly fine, until I upgraded my Windows 7 x64 computer to the "new iTunes version 10.2" with Apple Software Update. The installation went fine, however, now everytime I launch iTunes I get the following message:
"An unknown error has occurred (-42032)"
I click OK and I can still use iTunes. But again, everytime I launch the application I get the same message.
I have tried uninstalling all Apple software, reinstalling again, rebuilding my whole library, everything. But I still get the horrible message. I'm becoming really frustrated with Apple products and a failure like this. How can I fix it?
Thanks
P.S. My Windows 7 x64 is a spanish version

Same problem but using Windows 7 32 bit (German version).
De-installing and re-installing iTunes didn´t help.
I "downgraded" back to iTunes 10.1.2 and the error vanished.
polydorus wrote about how to do it:
http://discussions.apple.com/thread.jspa?threadID=2770922&tstart=0
On FileHippo go to the iTunes page. On the right you´ll see earlier versions.
And I had to replace my library file with the back-up version from yesterday.
(first support link)

After reinstall of OS on iBook G4, getting an AirPort error when trying to connect to wireless network

Just erased and reinstalled the OS (Tiger OS X v10.4) on my old iBook G4 so I could give a wiped clean laptop to my young son. At the point in the reinstall process where I Select a Wireless Service. When I enter the correct password for my correctly selected home wireless network, it responds with a message box that says, "AirPort error. There was an error joining the selected network." What now? Should I just select "My computer does not connect to the Internet" so I can get past this point? But the fact is, connecting to the internet is about the only thing he's going to use it for. Aaaaarrrrgggghhhh! Please help! All advice welcome...

Thanks for your response, but the initial problem is that I'm still stuck in the set-up process. I can't move past this screen to get to anything else unless I can get it to accept my wireless network password, or I suppose I could go back one screen to the "How Do You Connect?" screen and select "My computer does not connect to the Internet." I presume that might get me past this set-up phase into an area where I could futz around with settings. But I was concerned about disabling something I couldn't fix later (me, not a techie!) by selecting that. What's the consensus? Should I just do that so I can get out of the set-up process? Will I be able to reactivate my AirPort once I'm just in operating mode? I really should be more technically proficient than this...

I cannot uninstall my current version or install the new version because I always get the following error "The folder path 'Program Files (x86)' contains an invalid character."

How do you get ITunes to actually uninstall or install new versions when it doesn't like the path for some completely unknow reason. This is on a Windows7 system and by the way a lot of other programs are using this folder without any issues so it is clearly an Apple problem.

Try the following user tip:
"not a valid short file name" and "invalid character" install errors

I keep getting the message "error sending message to program" when I open a program and then it opens

Need help with above question.

Hi johnbpl,
It sounds as if you are having difficulty connecting to the App Store to check for updates for applications on your iPad. If that is the case, I would suggest that you troubleshoot using the steps in this article -
Can't connect to the iTunes Store - Apple Support
Start with the section Troubleshoot issues on an iPhone, iPad, or iPod touch then if needed the section Learn more.
Thanks for using Apple Support Communities.
Best,
Brett L

W520 "Power Manager has stopped working" then "finterprint software error"

For the last 6 months, I have not done any lenovo updates,and stuck with old working versions of bios, powermanager, nvidia drivers etc (having lived though the nightmanre of the fist 6 months with CPUs stuck at min on mains and max on batteries etc)
Then I re-installed from scratch and updated all lenovo drivers to the latest, which includes power manager 6.32
Now I get random "Power manager has stopped working" errors pop up for no apparent reason.
They are always accompanied by a finger print reader error:

hi eos,
Thanks for posting. Based from your post you'll probably need to reinstall the power manager and Fingerprint reader. I was checking the support site and it appread that there is also a patch for the powever manager that needs to be loaded.
At this point what I suggest is for you to uninstall the current Power manager you have install fro the link below.
Lenovo Power Management Driver for Windows 7 (32-bit, 64-bit), Vista (32-bit, 64-bit), XP (32-bit, 64-bit) - Notebook
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014939
Power Manager for Windows 7 (32-bit, 64-bit), Vista (32-bit, 64-bit) - Notebook
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014924
ThinkPad Power Manager Patch module for Windows 7 (32-bit, 64-bit), Vista (32-bit, 64-bit), XP - ThinkPad
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS018811
Please ensure to install all 3 links and check for the changes. In regards to the FingerPrint reader, I'm assuming that you have BIOEXCESS installed aswell. For the time being it is advisable to uninstall that too and check for changes. Once installed the power management. only the install a fresh copy of the BIOEXCESS and check for the changes then.
Do let me know of the update.
Regards.

After a deployment which includes Power Manager, get a RunDLL error referring to "C:\Program"

Similar Messages

Maybe you are looking for