After a failed attempt to update ipad through itunes, ipad is frozen black, does not respond and does not show in itunes when connected

I connected my Ipad to my computer and I started itunes. Ipad needed updating so I proceded. Then there was an error and now ipad is not working at all. I have updated itunes, and restarted the computer, but still, now, itunes does not recognize ipad when connected. What can I do?

Was it EVER jailbroke?

Similar Messages

  • After attempting to update to ios 7, my iphone is stuck in recovery mode and will not connect to the itunes software server.

    After attempting to update to ios 7, my iphone is stuck in recovery mode and will not connect to the itunes software server.  I have already tried the resetting with power swich and home button and plugging into computer but it says the "iPhone software update server cannot be contacted."  I am locked out of my phone.  Does anyone have any idea how to resolve this issue and get the phone working again.  I will add that I am now trying to restore it on a different computer with a lower version of itunes, but the computer that it initially happened on had the updated itunes and gave me the same result ... nothing.  Thanks for your help in advance.

    Try going to recovery mode as described here.  You may have to try this more than once to succeed.
    Use the original iTunes that the iPhone synced with.
    http://support.apple.com/kb/HT1808

  • TS1702 iPad is not responding. It ONLY shows an iTunes icon and a USB cable in the middle of an all black screen. Have tried to reset it (not responsive), link to iTunes (not recognized), etc.

    iPad is not responding. It ONLY shows an iTunes icon and a USB cable in the middle of an all black screen. I have tried to reset it manually and via iTunes (not responsive), linked it to iTunes (not recognized), etc. Nothing works. This happened after an iTunes updated, after I was asked to "restore" my iPad to factory settings.

    Thanks, King_Penguin. Yes, I tryied putting the iPad into recovery mode. It freezes in the black screen with the iTunes and USB cable. When I followed the instructions and then started iTunes, I received the following message: "A required iTunes component is not installed. Please repair or reinstall iTunes (-424040)".
    I have unistalled iTunes three times already and donloaded and installed three new versions. No luck.
    Thanks a billion once again!

  • ITunes Not Responding and Ipod not Updating

    Everytime I connect my Ipod to the usb, it shows up on itunes and as a drive. But when usually the ipod should be updating, it brings up a window saying itunes isn't responding,giving me options to send the error report or not, and then no matter which i choose, itunes closes and ipod does not update. Even if I reopen itunes, the difficulty happens again.Please help. I have updated my ipod with the latest updater and reinstalled iTunes.
    THANKS

    This may help -- not sure you've got the exact problem I had, but worth a try:
    http://discussions.apple.com/message.jspa?messageID=1548774#1548774

  • Please Help, My Finder not Responding and can not open after upgrade OS X Maverick!!!

    Hello guy,
    I ask this for help, yesterday i upgrade the OS X Maverick, after finish all the the installation,
    now my finder not responding even i try to relaunch many times, or can say that can't open Finder right now.
    So what can i do? can anyone tell me here?

    If that doesn't fix it try starting in Safe Mode and see if the problem still occurs?
    Restart holding the "shift" key.
    (Expect it to take longer to start this way because it runs a directory check first.)
    If this works look in System Preferences > Users & Groups > Login items and delete any third party login items (-), you can always add them back with the (+). Don’t just “hide” them by checkmark.

  • Ever since the most recent firefox update, every time I try to download anything firefox stops responding and will not do anything until I restart it. Can I revert back to a previous version, or is there a fix for it?

    Every time I try to download anything firefox stops responding and will not do anything until I restart it. Can I revert back to a previous version, or is there a fix for it? When I restart firefox, then the download continues and all is well until I try to download something new (which I do quite often).

    You may well find this article of interest and help in sorting out your problems: [[Installing a previous version of Firefox]] The article does contain a link for previous versions, but also points out other troubleshooting advice that may be more appropriate in some instances.
    Another useful article is [[Basic Troubleshooting]]
    I hope you sort out your problems either by downgrading or finding the cause of the problem.

  • My Itunes won't open after a failed attempt at upgrading.

    My ITunes won't open after a failed attempt at upgrading.  Keep getting the error message...Failed to start because MSVCR80.dll was not found.  I have tried uninstalling and reinstalling and notheing works.  Help!

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • HT4108 I have an iPhone4, used and locked to the UK network. I need to pay for the phone to be officially Unlocked. In the meantime we used it as a device to check emails and games etc.. We put a pass lock and after many failed attempts we forgot what it

    I have an iPhone4, used and locked to the UK network. I need to pay for the phone to be officially unlocked.
    In the meantime we used it as a device to check emails and games etc.. We put a pass lock and after many failed attempts we forgot what it is. Now the phone is Disabled and iTunes can not fix it since it can not update the Software without the phone being officially unlocked..
    any idea how to do this?
    Please advice

    gencml wrote:
    We put a pass lock and after many failed attempts we forgot what it is. Now the phone is Disabled and iTunes can not fix it since it can not update the Software without the phone being officially unlocked..
    any idea how to do this?
    Please advice
    You need to visit Apple Store, and show ownership proof in case of forgotton pass code.

  • When I attempt to updates apps on my ipad my password does not work. I tried updating them one at a time and it still doesn't work. I've reset my password and I can use the new password and update apps on my PC but not on my ipad. Why?

    When I attempt to update apps on my ipad my password does not work, even when I attempt to update each app separately. When I change the password it works on my PC but not on my ipad.  Why?

    Try logging out of your account on the iPad by tapping on your id in Settings > Store and then log back in and see if it then works.

  • Use an alternative e-mail address after repeated failed attempts to send.

    My company uses a small e-mail server company that offers a lot of benefits, but occasionally goes down for a day or two. I would like to find a way to automatically use another e-mail address after several failed attempts to use this server.
    Thus, if everything is working right, my e-mail will use the regular server. However, if the original server is down, when my e-mail fails to send repeatedly using that server, I would like it to default to another server. Is there a way to configure this?
    Thank you.

    No, you can’t. .Mac’s SMTP server simply doesn’t allow sending from a non-.Mac address.
    Doesn’t your ISP include some POP or IMAP mail accounts with access to an SMTP server as part of the service? Such an SMTP server might be less restrictive.
    A Gmail account would allow you to use Gmail’s SMTP server. Instructions for setting up a Gmail account are provided here:
    http://mail.google.com/support/bin/answer.py?answer=13275
    After setting up the Gmail account in Mail and checking that it works, you can use Gmail's SMTP server to send from your other mail accounts as well:
    1. Log into your Gmail account on the web.
    2. Go to Settings > Accounts.
    3. Enable the addresses you want to be able to send from, and let Gmail validate them by verifying that you do indeed own them.
    4. For each mail account you want to send from using Gmail’s SMTP server, in Mail go to Preferences > Accounts, and choose Gmail’s SMTP server from the Outgoing Mail Server (SMTP) popup menu.
    BTW, if you’re using Mac OS X 10.3 (Panther), as your profile indicates, it would have been more appropriate to discuss this in the Mail & Address Book - Mac OS X 10.3 & earlier forum. If the discussion applies to both Mail 1.x and Mail 2.x, it doesn’t really matter, but it’s difficult to know that in advance.

  • HT201401 I changed my pass code and couldn't remember the new pass code. After several failed attempts, my iPhone has been disabled. What do I do?

    I changed my pass code and couldn't remember the new pass code. After several failed attempts, my iPhone has been disabled. What do I do?

    If you forgot (or don't know) your passcode, restore the device from backup on the last computer it was synced with when the passcode was turned on... this will remove the passcode. If you do not have access to the last computer it was synced with, you will have to force it into recovery mode & restore as a new device.

  • I receive System Disabled with code 68072590 after 3 failed attempts

    I receive System Disabled with code 68072590 after 3 failed attempts
    This question was solved.
    View Solution.

    AM try.
    77950516
    Use that code to go into the BIOS.
    Disable all passwords that are enabled.
    IF asked for the CURRENT password use that code.
    IF asked for NEW password just hit enter.
    If asked to VERIFY password just hit enter.
    Save and exit.
    REO
    I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • Iphone 4 not recognized and will not sync after latest itunes update.  I have done all trouble shooting and uninstalled and reinstalled itunes to no avail.

    iphone 4 not recognized and will not sync after latest itunes update.  I have done recommendedl trouble shooting and uninstalled and reinstalled itunes to no avail. Can I go back to earlier version of itunes or restore computer to fix?

    'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • I attempted to update my iphone5 to 7.1.1  There was an error and now my phone is erased.  I have attempted to restore from the cloud and it propogates the apple id with an old one, and will not allow me to restore from a the cloud

    I attempted to update my iphone5 to 7.1.1  There was an error and now my phone is erased.  I have attempted to restore from the cloud and it propogates the apple id with an old one, and will not allow me to restore from a the cloud

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              
    Also, do you remember what the error message said?

  • Ipod classic will not restore and will not work after many attempts

    I have purchased and replaced 3 ipod models, This is my third one (80GB ipod classic) and with out fail after 1 year and 2 months after buying it, it stopped syncing with my itunes and now after 5 attempts to restore it will not restore and will not work. I am sick of this and find it preposterous. What is wrong with ipods..? what is wrong with my recent one?

    I have tried to restore via itunes and I still get the same message on the Ipod after many many restore attempts."Use iTunes to restore" with the picture of a plug on the screen and then it just shuts down. Exactly 1 year and 2 months after I purchased it as was the previous Ipod I had in 07.... what is going on?
    Are ipods not made to work with both macs and pc's? it seems they just shut down after a while
    what can I do?

Maybe you are looking for

  • Adobe CS6 Design Download Problem

    I have purchased Adobe CS6 Design and Web Premium for Windows.  I was able to download some but not all of the programs.  I receive an Adobe window message to indicate thatPhotoshop, InDesign and Flash Professional could not successful be downloaded.

  • Updating Content Area File Items

    I have added an item (type FILE) to one of my content areas. This file is an HTML document named Oracle.HTML. The problem that I am having is that if I have to update the Oracle.HTML file and re-upload that file to the database, Portal is kind enough

  • Error in ESS: Change Own Data

    Hi All, We have EP7 SP14 and ESS/MSS SP11. The SAP_HR is on level 24. We are getting error in Change Own Data. The error is as below: com.sap.xss.hr.cod.model.CodModel,com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: no jcoMetadata found

  • Updates in Photoshop CS6

    I cannot get updates to install in Photoshop or Camera RAW. If I run Raw update 7.4 it says succesfully installed but when I open a RAW file it says version 7.2. I have disabled virus checking and get the same result and I have reinstalled Adobe Prog

  • ITunes 8.2.0.23 won't open?

    At first, I would click on the iTunes shortcut on my desktop and this window would pop up saying "Please wait while Windows configures iTunes". It would attempt to do so, but would encounter some error and I'd have to cancel. I deleted the shortcut f