After a few times VB shows white or black page

Hi,
I used the demo program BI_GUI_SAMPLE1.
The program start initially with a good screen.
after about 6 times i get a white screen, or black screen or nothing.
Like the picture blow. The programm is running but doesn't show a map.
I copied the program, made some modifications but i can't get it working.
I need to close all sessions and SAP-GUI.
Starting again, it works for 6 times.
Maybe helpfull:
I can't get the WebDynpro version working due to ACF problems.
Does anybody know how to fix this?
Best regards
Maarten

Hello Maarten,
please update to the latest version VB2.1 PL4 released wednesday. The prior version had some serious resource leaks which might cause your issues.
In order the get the WD version running with ACF please check this article as a starting point:HowTo setup Visual Business Native Client.
Best regards,
Uwe

Similar Messages

Updated iTunes shows white on black page view

Just updated iTunes recently and on first use all items on page are on black background. Sidebar is white text on black background. View options pop up shows the same. Can't really see any text on pop up screens. Icons hard to see too. Haven't found anywhere I could change this view. I've been on this pony before so its not new stuff I'm missing. Something got messed up. Can't restore previous version of iTunes from TM.
ANY IDEAS?
Thanks

I have the exact same problem. I've restored multiple times on two different computers without any luck. This seems to be a brand new issue happening today as I have found multiple threads about this issue...
https://discussions.apple.com/thread/4142843?tstart=0
https://discussions.apple.com/message/19042686#19042686

TS1814 I am trying to update my Iphone 3 and when i get to the activation step after a few minutes it shows a message that says " Your iPhone could not be activated because the activation server is temporarily unavailable. Try conenecting your iPhone to i

I am trying to update my Iphone 3 and when i get to the activation step after a few minutes it shows a message that says " Your iPhone could not be activated because the activation server is temporarily unavailable. Try conenecting your iPhone to iTunes to activate it, or try again in a couple of minutes.
If the problem persist, contact apple support at apple.com/support
I been trying for a few times now and I keep getting the same message. How can i fix it? now my phone doesnt work.

These are the steps mentioned in the article iPhone: Troubleshooting activation issues
Perform the following steps if you receive one of the messages above:
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to a known-good Wi-Fi network if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance.

Adobe audition cc crashes after a few times of recording(please help)

Okay so Adobe audition is incredibly useful or should i say WAS... It was great until one day it just crashed after a few times of recording. I just thought maybe something went wrong whatever ill re do it. But no.. for months ive been trying, uninstalling and reinstalling, updating, closing all other programs running but nothing has seemed to do it. Audition is really important to my music career and lately i havent been able to do anything because it doesnt work. Im begging, can someone PLEASE try to help me, im desperate.
heres a pic of what happens when it crashes:

I notice from the picture that you have four files in the middle of processing. Do you remember what they were doingwhen the crash happened? Were they saving or did you have some effects processing going on?
Also either Audition or Windows may have saved a crash report somewhere which could help to diagnose the problem. I am not sure where they may have been saved but others might remember where to look for them.

I just stared having problems with importing files from nikon D810 into LR 5.7 it pop a window saying it can not read files on working on a imac 27" running yosemite on my mac pro after a few times it finally was able to read files and import them into LR

I just stared having problems with importing files from nikon D810 into LR 5.7 it pop a window saying it can not read files on working on a imac 27" running yosemite on my mac pro after a few times it finally was able to read files and import them into LR I never had this problem before was there some kind of update that could of cause this?

Unable to bootup after Yosemite install. have to keep shutting down from rear button. it does come on after a few times but then hangs at user login again. If you get in it is great. Seems faster than Mavericks but there is some sort of issue, bouts

unable to bootup after Yosemite install. have to keep shutting down from rear button. it does come on after a few times but then hangs at user login again. If you get in it is great. Seems faster than Mavericks but there is some sort of issue, bootup /login.

Knock on wood, this seems to have been my problem as well. I stumbled on this thread after dealing with this ridiculously-long boot times for the past several weeks.
I just reinstalled McAfee Antivirus and my Macbook Air booted up in less than 1 minute. No more hanging on the boot-up progress bar. No more hanging after I click on my user's avatar on the log-in screen. Bootup would often take 5+ minutes and sometimes never complete.
This has been SUPREMELY frustrating.
THANK YOU SO MUCH FOR POSTING YOUR RESPONSE!!!

What to do if upon charging after a few minutes it shows the plug symbol on battery but the green battery icon on the main screen is still half?

what to do if upon charging after a few minutes it shows the plug symbol on battery but the green battery icon on the main screen is still half?

One of two things usually. Less often charger is faulty, try another charger. Most often the plug symbol in this situation indicates faulty battery.
Try a Reset, hold both home and power buttons until the iPhone restarts itself, ignore the "slide to power off" let iPhone restart itself.

IPhone 5 Battery stays at the same percentage, phone fades shows white and black lines then dies. Now phone screen is shaking and does the same thing.

My iPhone 5 which has been working fine has only today started to get these problems. The phones battery percentage stays at the same number and only changes if i swith it off or when it does it byitself but then stays at that number. When I use it it constantly turns off by slowly fading then showing white and black lines then going off. The screen is now shaking and keeps turning off. It was on IOS 6 which I just updated as I thought this could be the issue but it still does the same thing on IOS 7. Has anyone else experienced these problems or know what is wrong with my iPhone?
Please reply!

Sounds like the device is failing. Since you updated to iOS 7, that would do the same as a restore. I would make an appointment at the Genius Bar at Apple to have the device checked.

At I-tunes store, i am asked to review my id then after accepting the terms the I get a black page. What do I do?

At I-tunes store, i am asked to review my id to verify (first time use). Then after accepting the terms the I get a black page and it hangs there. What do I do?

If you mean that the app froze on you - quit the app and restart the iPad.
Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If you mean that you think that you are stuck on the terms and conditions screen ....
See if you can go to any of the tabs in iTunes and start purchasing whatever you want. That terms and conditions page is the default page in the downloads section that appears after you complete a download.
Try the featured tab in iTunes and see if you can buy something - or go to the App Store and try to download a free app - any app - just as a trial.

How can I get my files to print? when i go to the print page they show up a black page .

I seem to be having trouble getting downlaoded pdfs to print off. I can view them and they look ok but then i go to the print setup and all that shows is a black page. If i try to open the saved file from the desktop it say the file is damaged or corrupt . this doesnt always happen. sometimes it's fine, so idont know what is wrong, the file , my printer , adobe reader?? can anyone help?

HI thanks for that Pat, but doesn't seemed to have fixed it . I dont have that option on my print set up.
this is message i get when i try to open the file. Adobe Reader could not open 'calleen-2014-a4-form.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).
when i am viewing the document online i dont have any access to adobe reader menus or bar at the top, then i go to print from safari browser and then the page in the print box is black , no image. Any other suggestions . thanks

X220t does not boot anymore after a few times running, does not get past BIOS

I just bought a x220t and want to use it with Win8.1. I had before upgraded my x201t to win8 with no problem at all.
After a few succesfull runs in wich I do the patching it stops booting completely. I can't even push F8. It will only go to Bios in witch I have fidled a bit, but nothing works. I have tried a fesh install for three times. It does boot an USB DVD drive with the origiganal win 8.1 disk, but it can't fix my problems.
I have an I7 version whith Intel 160GB ssd. I did a lenovo check, all clear, I dit an Intel SSD check, all clear. Unfiortunatiely I have delated the restore partition. I am on the latest BIOS (1.39)
Sometimes I get in to the Lenovo boot menu, with no result. I want to rip out my hairs!
Any help?

Hi thomas1921,
Not an answer to your specific question, but I'm very surprised that a BIOS update would break DVD booting. Have you tried pressing F1 at boot to get to BIOS Setup and examining / changing the boot order? Or pressing F12 at boot to select the boot device? (Think the F12 feature must be enabled in BIOS Setup.)
Results of Your Ideal Business-Class Laptop survey, concluded 2009-07-29.
Did someone help you?
Say thanks! with a kudo.
Even better: Pay it forward, help someone else.

Playback gives black screen after a few times

Hi!
This is my problem. I just installed Adobe Premiere CS6. After trying it a few hours the program has allready frozen a dozen times and unexpectedly quit a few times. Is there some major bugs in the CS6? (One of the recurring problems is the playbutton in the playback window to stop responding. Nothing happens when I click it) Also, I can't find the adobe upater anywhere on my computer, but once in a while it opens atuomatically so it has to be here somwhere. Where is this program located and how can I manually check for updates?
But, the biggest problem is this: when I add a clip to the timeline it first plays back just fine. But then, after adding another clip to the timeline, or a few minutes later, it suddenly doesn't playback anymore. It plays the sound, but the window is just black. The only way I've been able to get the picture back is by restarting the entire program.
I'm very new to Premiere Pro, has up until now only worked with InDesign and Photoshop so it might just be something I'm not understanding how to do but it seems like very strange behaviour to me.
I work on an iMac with OS X 10.7.5
Adobe Premiere (6.0.0 (319 (MC: 264587))
Help would be much appreciated!
Thanks!

I just tried to install Premiere on my new MacBook Pro as well but I'm still not able to playback the picture. The sound works but the playback screen is completely black.
MacBook Pro (Retina) OS X: 10.8.2.
Adobe Premiere Pro CS6: Version 6.0.2 (072 (MC:264587))
Source Footage: Quicktime (56 gb in one file): Apple ProRes 422, Linear PCM, Timecode.
I also have some smaller clips in this Quicktime Codec: H.264, Linear PCM.
No error messages. Sometimes the program just freezes and I have to force quit it. Or it just won't playback.
It was a entirely fresh install of the software. I'm a member of adobe cloud so I downloaded it from the application manager.
I'm also running photoshop and inDesign which are working just fine. At the time i launched Premiere no other Adobe programs where running. Just programs as: textedit, mail and evernote.
No third-party codecs installed.
Tried to update Premiere with the latest updates but that didn't do any difference.

Mail App delete rules after a few time

Hi,
Every time i write a rule in Mail app, it disappear a few minutes after and only the default Apple rule keep living.
Someone have the same problem ?
Another icloud sync issue ?
Any fix ?
Thanks.

This started happening to me only recently. Same hardware, no OS update - most obvious thing I'd changed recently is that I'd gone from having one (enabled) mail account to two. Previously it was just one Exchange account, and the new account is a Google IMAP account. I'm going to test to see if the problem goes away when I disable *either* of them (suggesting the problem is in how Mail.app handles multiple enabled accounts) or if I must specifically disable the Google IMAP account (suggesting the problem is specifically in how Mail.app handles Google and/or IMAP).

Firefox will not work after a few times of working

firefox will not start after you start it a couple of times.
== This happened ==
Every time Firefox opened
== when i got the latest upgrade

triggering two rollovers and no rollout , how this possible ?
as i say the problem fixed when i delete sparkle mc from my hover frame , and i dont see any unusual thing in this clip , it just some star graphic rotating and one gradient circle to fade ( nested layers ) with no script.
i can ignore this movieclip but i`m really Curious why and how a movie clip in my button can do something like that .
i dont have info about trace but when i write : trace (animOut); in my script , after compile the function Function() {} message apear in output window .
i search around and i only found those script i write here and 3 stop(); for my buttons , nothing more , so how could possible to triggering two rollovers and no rollout ?
can i attach this little fla file for you . it will be great . thanks .

ConnectException after a few times of start/stop

I've made a serverUI where I want to start/stop my server. It works to start it, stop it and start it again. But when I then want to stop it I get a ConnectionException. Any ideas?
Here's some code.. (I'm using 1.1.8)
I do this once at startup:
try
     Runtime.getRuntime().exec("rmiregistry");
catch(Exception pException)
     System.out.println(pException);
     pException.printStackTrace();
I do this to start the server:
try
     Runtime.getRuntime().exec("java -classpath .;C:\\jdk1.1.8\\lib\\classes.zip;\\jdk1.1.8\\lib\\comm.jar -Djava.rmi.server.codebase=http://"+InetAddress.getLocalHost().getHostAddress()+":8080 -Djava.security.policy=policy bentrix.solarPower.server.SunControlImpl");
     mServer = (SunControl)Naming.lookup("//"+InetAddress.getLocalHost().getHostAddress()+"/SunControlServer");
catch(Exception pException)
     System.out.println(pException);
     pException.printStackTrace();
I do this to stop the server (with a delay and then System.exit in the server):
try
     mServer.terminate();
catch(Exception pException)
     System.out.println(pException);
     pException.printStackTrace();
I end up with this exception... I've tried putting in delays but that didn't help. I've watched the processes and the first time mServer.terminate() really removes the server. And it works to start the server again. But when a new try to stop the server is made it fails! It does works to connect from the "real" client even now so nothing is wrong with the last start of the server.
java.rmi.ConnectException: Connection refused to host: [212.214.64.210:4134]; nested exception is:
java.net.ConnectException: Connection refused
java.rmi.ConnectException: Connection refused to host: [212.214.64.210:4134]; nested exception is:
java.net.ConnectException: Connection refused
at sun.rmi.transport.tcp.TCPChannel.openSocket(TCPChannel.java:276)
at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:143)
at sun.rmi.transport.tcp.TCPChannel.newConnection(Compiled Code)
at sun.rmi.server.UnicastRef.newCall(UnicastRef.java:60)
at bentrix.solarPower.server.SunControlImpl_Stub.terminate(SunControlImpl_Stub.java:845)
at bentrix.solarPower.serverUi.SunControlServerUI.stopServer(Compiled Code)
at bentrix.solarPower.serverUi.SunControlServerUI.actionPerformed(SunControlServerUI.java:211)
at java.awt.Button.processActionEvent(Button.java:249)
at java.awt.Button.processEvent(Button.java:222)
at java.awt.Component.dispatchEventImpl(Compiled Code)
at java.awt.Component.dispatchEvent(Compiled Code)
at java.awt.EventDispatchThread.run(Compiled Code)
Any better way to start/stop the server please let me know!

Oops! I fixed this by doing Naming.unbind() in the server when I shut it down. But I still have to watch very careful in the task manager when I do the start/stop by pressing a button in the serverUI because if I do start before the server has been killed I get the same exception! Is there a good way to know that the process has terminated or do I just have to disable the button for a little while?

After a few times VB shows white or black page

Similar Messages

Maybe you are looking for