After a Full Days Work on 9.1

No problems!
I used VIs, tracked some audio, and did an offline bounce of a reference track at the end of the day.
I used Beat Mapping, added markers, punched in...all the usual stuff.
Knock on wood. Running fine...
Tom

I just ordered the upgrade to LS 9 from 8 specifically for 74-bit capability.
I also use a mere 4 cores on my Mac Pro but I now have 9 gigs RAM on it, so I "wanna" find out how it works with all that.
I compose electronic music, so use track automation a lot, Sculpture, EFM1and ES2 a lot.
I hope everyone has good experiences. The release notes for 9.1 show gobs of bug fixes -- makes me think 9.0 was really buggy. But I'll apply the patch for 9.1 the moment I install.

Similar Messages

Location sensors not found after 3-7 days work

Good afternoon. I want a permanent job location sensors in my own program. Everything works fine about 3-7 days. But then SensorManager stops include location sensors. I make sure with it when I open any other program from windows Store using location sensor. Location sensors start working after the restart windows or off/on option "Turn on the windows Location platform" in Control Panel. There are other software developers on this tablet with this problem. Is there any way to restart sensor location software programmitically? Or newest drivers?
sorry for my english device:Lenovo thinkpad 10
Hardware ID: Sensors\BcmGNSSLocationSensor_LNV_4752_0000
Driver: 20.18.1477.17Windows: 8.1 Bing

That driver version (20.18.1477.17) is the latest one listed on the Lenovo Support page:
http://support.lenovo.com/us/en/products/tablets/thinkpad-tablet-series/thinkpad-10
I am currently running the Technical Preview of Windows 10 (build 10166) on a ThinkPad 10, and I see that I have a newer version of the Broadcom 4752 driver: 20.22.405.18. That may be part of Windows 10.
When I was running Windows 8.1 on the ThinkPad 10, I also occasionally saw the same issue: the location sensor would stop working. It might also be caused by the tablet being indoors, and losing contact with GPS satellites. Does the tablet restablish contact if taken outdoors, or is a reboot the only way to get the sensor working again?

HT1386 hi, when i am syn my books from my mac to ipad even after one full day sync itunes show wait for items to copy and the books in ipad are still not fully loaded. how do i fix this, i have a large collection of books

hi, when i am sync my books from my mac to ipad even after 24 hours sync, itunes show "wait for items to copy" and the books in ipad are still not fully loaded.
how do i fix this, i have a large collection of books around 12000 books

Nobody knows? Not even administrators?
Please it would be really nice to have help on that to take all the benefit of the remote app.
Thank you very much in advance.

Firefox was working fine in the morning, after half a day, it just crashed and now every time i try to start FF it crashes, i reinstalled FF, even tryed FF 4 beta, every time same crash report window, and nothing happens.

After a half day working normally, FF just crashed, and now i reinstall it, even tryed FF 4 beta, and still getting crash report. Cant even start in safe mode, same crash report window pop up.
Checked for viruses, malwares. Nothing helped.

Other applications print okay? If so, try deleting the Preview .plist
You need to look in your user Library/Preferences for the .plist. Hold down the option key while using the Finder "Go To Folder" command. Enter ~`/Library. Delete the .plist(s) for the application.
If you prefer to make your user library permanently visible, use the Terminal command found below. It does work with Mountain Lion:
http://osxdaily.com/2011/07/22/access-user-library-folder-in-os-x-lion/
You might want to bookmark the command. I had to use it again after I installed 10.8.2. I have also been informed that if you drag the user library to Finder it will remain visible.

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for the HP driver when i boot up. It also will not save in any print or postscript format. Does anyone know how to fix?
Currently use a Mac with the latest Mavericks 10.9.4

Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport

After uploading our phones with the latest update, we have noticed that the battery life has deminished considerably. I now have to charge my phone overnight and two or three times a day. Prior to the update, my battery life lasted me at least a full day

After uploading our phones with the latest update, we have noticed that the battery life has deminished considerably. I now have to charge my phone overnight and two or three times a day. Prior to the update, my battery life lasted me at least a full day. We have several phones in our office and the ones that have updated (4) now have issue holding a charge/battery life. I really liked this phone and can not believe that you are now going to charge us $79 a battery to fix what is most definately a problem with your latest update. I know other people outside of our company that are having the same problem. Not to mention when I called AT&T it was confirmed to me that they are hearing the same issue and then some from other customers as well. Your own people, once I talked to them earlier today, told me they are showing a history of issues that are showing up after the update was put in place. Of course she tried to say, "Maybe the age of the battery and the update both contributed". Whatever.
I want you all to know how disappointed I am in your company for the handling of this issue. I always thought "Apple" was the line I didn't have to worry about having any types of issue. And that you all would stand behined your product 100%. Now I am not so sure.
I would love to hear back from your company on how you perceive the issue with all of these phones that prior to the update didn't have any issues and how after the update THEY ARE NOW having issues. I do not believe this was an issue due to the age of a battery and that was pretty lame to say so. It was fine and now its not.
Please feel free to contact me and help me figure out a way to pay for all of the batteries that will be needed for our company to contiue doing business as needed.
Thank you.
Web Address (URL):
5106 McNarney

Sorry this is a user to user technical forum. There is NO APPLE here as stated in the term of use when you signed up for this forum.
here are some battery tips
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
http://www.apple.com/batteries/iphone.html

My batterie doesn't work correctly to my Iphone 5. It should work longer, but it's worse. My battery does not hold a full day without much use.

It should work longer, but it's worse. My battery does not hold a full day without much use.
When the new version of ISO6 will come ??? A lot of apps don't work correctly too.... :-(
I'm a little bit disappointed...

Sounds like your iPhone is locked to your home carrier.
See if they offer unlocking and if you qualify. Otherwise,
there is nothing you can do besides rent/but a cheap
phone for your month in Argentina.

I can't connect to livejournal. It keeps saying that the connection has timed out. It has been almost a full day since this happened. I tried loading livejournal on Explorer, but that didn't work either

When I try connecting to livejournal, it tries for a while, then I get an error page saying that the connection has timed out. What's odd is that usually livejournal gives us a warning when the site will be temporarily offline. When I try connecting to livejournal through Explorer, the same thing happens. I've been hitting the try again button for almost a full day. Again, livejournal doesn't normally go offline this long.

Nevermind, it's working again. Huh. I posted this, then tried livejournal again and it worked. I'm glad it is, but hey! *iz suspicous*

NB100 touchpad scroll bar stops working after exit full screen mode youtube

I have few Toshiba laptops, satellite, and now netbook100.
All of them share one problem, touchpad scroll bar:
It will stop working after exit full screen mode in youtube.
Here is how to reproduce the incident:
1. using any mainstream browser, start playing a youtube video, click full screen button at the bottom right corner of the video.
2. click on the [cross] to exit the full screen mode. (next to full screen button.)
3. check if you scroll bar still functioning.
4. a reboot will restore the function.
Currently, Im on vista, I believe in XP you will have the same problem.
Searching in google (touchpad scroll bar stops full screen youtube) will return more people share the same question but no answer.
Environments: win xp all, win vista all.
Windows all most updated driver, touch pad driver up to date.
This is not a major tech problem but for a netbook, this is very annoying.
If anyone have this problem or answers, please share it here.
Thank you in advance.
regards.

I had the exact same problem on my laptop and after a lot of searching, I finally found the simplest solution that really works for me so here goes:
Once you exit the full screen video and the scroll pad has stopped working, click once anywhere on the youtube page(just to unfocus from the video) and press the spacebar button on your keyboard twice.
Et voila, your scroll pad should be working again. Beats the hassle of having to log off everytime.
Hope this helps

Remote control stops working after a few days

NW 6 SP3
ZFD 3.2 SP2
After importing workstations, remote control works fine. After a few
days, remote ping might work but NOT remote control. Sometimes even remote ping errors out with the message that the "REMOTE MANAGEMENT
AGENT
IS NOT RUNNING"(when it appears it is). If I stop and start the
"novell
wuser agent" service, then I can usually remote control the
workstation
again. Occasionally, however, I get the message "The Remote
Management
agent was unable to locate the workstation in NDS". At which point I
have
to delete the workstation object and re-import the workstation to be
able
to remote control it again.
Any help is appreciated.
Jeff

> [email protected]
>
> >
> > The login script is running wsreg32.exe with the /s parameter
> > pointing to the server servicing the import services.
>
> Is there a reason you are using this?
> instead of DNS, hosts, or registry?
>
> As I am wondering if maybe at times the workstation manager tries to
> registr, but can't find the server, even the wsreg is running.
> Normally onces the workstation has registered it doesn't need the
> address again, but if for whatever reason cannot find it's
workstation
> object it will need to resolve the import services.
>
> --
> Jared L Jennings, CNE
> Novell Support Forums SysOp.
> http://support.novell.com/forums/faq_nntp.html
>
> Posting with XanaNews Reader 1.15.8.2
> Geek by Nature, NetWare by Choice.
I have a different server for each site(city) hosting the import
services. There is only one variable allowed in DNS so all sites
would
try to get services and register to the same server.
Using the container login script for each site to set the /s parameter
was
easier than changing the registry setting for each
workstation...especially if that server changed. This way I would
only
have to change it one place.
If the workstation has already been registered and imported AND I can
remote control it, does it NEED to find the import server again if it
hasn't been rebooted since the last time I remote controlled it?
Thanks, jg

Flash player stops working after a few days.

I'm recently having issues with flash player on IE and Firefox each time a new version is released. This time the flash player stops working after a few days without any reasons. I have asked two other questions and I have tried the solutions but this time they are not working:
http://forums.adobe.com/message/4617987#4617987
http://forums.adobe.com/message/4548211#4548211
Could anyone tell me what the reason is?
I also need links providing Flash player for IE and Firefox which are always updated. I need to first download the installer then install it offline not install it directly from adobe website.
Please help me solve this once forever!
Message was edited by: sia1989

I'd suggest trying a clean install: How do I do a clean install of Flash Player?
For offline installers, please see this help document: http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header

Keyboard controls stop working after exiting full screen

Hi everyone,
I have QT Pro 7.4.1, with a problem that started after upgrading to the .1 version.
When I exit full screen mode while watching a movie, the keyboard shortcuts for the player controls stop working. Instead, the computer beeps at me when I press the spacebar, etc. The keyboard controls still work during full screen mode, and after exiting full screen mode, I can still click on the play controls with the mouse to make them work. I've looked through the forum, but can't find anything about this. I also got this problem with one of my school's computers, with the same version of QT Pro. Is anyone else having this problem? Is it a known bug?
Thanks,
Irene

Yep.
A bug of sorts.
A "click" on the small screen version will restore QuickTime Player "focus" and then the keyboard inputs will work as designed.

My macbook pro shuts down and doesnt let me turn it on after a few days i try to turn it on and it works but then after a few hours or so of using it it turns off again and the cycle of me waiting days to turn it back on happens again whats the prob?

my macbook pro shuts down and doesnt let me turn it on after a few days i try to turn it on and it works but then after a few hours or so of using it it turns off again and the cycle of me waiting days to turn it back on happens again whats the prob?

If you haven't already done so, try this simple step first.

My MacBook adaptor stopped working so I used my roommates. Now hers doesn't work after just one day. What happened?

My MacBook adaptor stopped working so I used my roommates. Now hers doesn't work after just one day. What happened?

Hello, cherilyn.
Thank you for visiting Apple Support Communities.
I understand that a couple MagSafe adapters will no longer charger a couple MacBooks. Here are the best troubleshooting steps to go through when experiencing this issue.
Apple Portables: Troubleshooting MagSafe adapters
Cheers,
Jason H.

My iPhone 4s on the latest update freezes even after a full restore.. is it gone?

At first, my iPhone 4s completely froze and I was unable to turn it on (even after holding power/home button--the apple logo would come on and then it would just turn off). I wasn't able to get it into restore or DFU mode. After some troubleshooting, I decided to order a new battery. I replaced the battery and was then able to get it to restore, however--after I restore it and it comes time to restart the phone, it gets stuck and doesn't turn on. If I unplug the phone and then hold down the power and home buttons for about 20 seconds, it restarts and shows the apple logo and shows the initial lock screen. If I let it scroll through the different languages for the "slide to unlock" text, it gets to what looks like japanese or chinese and then freezes. I then have to hold power+home again to restart it. If I slide it immediately when it shows up, it initially froze right away--but after another restart, it worked. I then am able to set it up and get to the wall of apps screen. From there, the phone worked for about half a day and then it froze up again (black screen, couldn't wake it up, stuck at apple logo and then just turns off).
I then was able to restore it AGAIN (on my own personal computer with a fresh install of itunes, I'm doing this for a friend) but the same symptoms persist--it will freeze if I don't unlock it right away, it freezes once when I unlock it right away, and after another restart, it gets through setup and to the wall of apps. The first time I set it to restore from iCloud and re-installed all of her apps. This time, I signed in with her Apple ID and enabled iCloud but did not download any of her old apps. When I go to the apple store, under featured and top apps its just a blank white screen but when I search for an app it does show results. As of right now (30 minutes after restore) it IS working, but it worries me that the same bugs happened after a restore. I feel it's only a matter of hours before the phone freezes up again and requires a restore.
She does not have apple care and even though she loved this device, she isn't going to buy another iPhone because of all the problems shes had with this one (it's just over a year old). Help keep an iPhone fan! Do these problems sound familiar to anyone? I'm an android user myself and I love rooting/flashing new ROMS, so if jailbreaking her phone or doing some kind of super-restore with 3rd party programs might help, I'm all for it--I just wanted to get some opinions on if this phone is even worth working on more than I already have since the issues remain even after multiple full restores.
Any help would be appreciated! Sorry for the wall of text.
-Adam (on behalf of Kathleen Morton)

After some troubleshooting, I decided to order a new battery. I replaced the battery and was then able to get it to restore, however--after I restore it and it comes time to restart the phone, it gets stuck and doesn't turn on.
Sorry, your repair ruined the iPhone.
She does not have apple care and even though she loved this device, she isn't going to buy another iPhone because of all the problems shes had with this one (it's just over a year old).
After you ruined the iPhone with DIY, Apple won't touch it anymore. You should have asked before all these had happened.
I'm an android user myself and I love rooting/flashing new ROMS, so if jailbreaking her phone or doing some kind of super-restore with 3rd party programs might help, I'm all for it-
Yeah, all Android user can think of is Jailbreaking, read this: http://support.apple.com/kb/HT3743

After a Full Days Work on 9.1

Similar Messages

Maybe you are looking for