After a network interrupti​on, my photosmart 7510 prints pages with a "d" on them.

After a network interruption, my Photosmart 7510 prints pages with a "d" on them. I have Windows 7. There is no error message on my computer. When I check "See What's Printing," nothing is shown.

Hi rosegirlmom,
Does this only happen when the router is reset?
Why is the router getting reset?
Have you tired using a different router to see if this stops the issue?
 Restore Network Defaults:
On the printer control panel, touch the Wireless icon ( ).
Touch Settings .
Touch and then slide your finger up on the display to scroll to Restore Network Defaults .
Touch Restore Network Defaults .
Touch Yes to confirm your selection.
Restart the printer, and then connect it back to your network.
You may need to run the Update IP address icon located in the HP folder in All Programs to update the computers with the new IP address assigned to the printer.
Let me know what happens?
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

  • Unable to print borderless 4x6 photos with the Photosmart 7510 printer.

    I am unable to print borderless 4x6 photos with the Photosmart 7510 printer.  There are no option listed for any size borderless printing when i choose the paper size and paper type.   I am running Windows 7 Home Premium  64-bit. 
    This question was solved.
    View Solution.

    I found it. Once you hit print, click on the options link. It opens a separate window. In that window there are two links, one says color management and the other says printer properties, click printer properties. That opens a new window, in that window click the advanced button. That opens a new window titled HP 7510 Advanced options, under the printer feature section near the bottom you will see "Borderless Printing". Left click on that and to the right a drop down menu opens, select borderless, hit ok. After you do this, it will print borderless however you will still NOT see that option when you print, like you used to with the older HP printers. I couldn't find it in the help section, I just stumbled upon it, very frustrating! It will print borderless.

  • My new HP all in one computer was recently connected to our new Photosmart 7510 printer. It worked

    I own a one month old HP Omni 220 PC (all in one). The operating system is Windows 7. It is connected to wi-fi network in the home. The Internet portion works fine. And, for about 30 days, it would print to our new wi-fi connected HP Photosmart 7510 just fine. Today, it will not print. Our other computers connected to the network print just fine. So, it's not the printer, or the wi-fi. Can you tell me what might have happened within my PC, and what I need to do to fix the problem? I tried restarting the PC, and the printer but that didn't fix the problem. There have been no recent changes to the software or hardware configurations.
    Thanks,
    Bill

    you have to file the music file if you dont itunes cant play a file that does not exist. check the get info and look for the old music file on your old computer. Or do this http://support.apple.com/kb/ht4527.

  • Compatibility of using Photosmart 7510 printer with a Photosmart 7525 printer from the same computer

    Before installing, registering, and setting up my new HP Photosmart 7525 I need to know whether I can keep using my 2 year old HP Photosmart 7510 and its software on my computer and whether this would cause a conflict.  My 2 year old Photosmart 7510 works fine and I want to  use the Photosmart 7510 and the Photosmart 7525 both from the same computer and network without conflict.  And if a conflict would be probable, is it necessary to remove the Photosmart 7510 software before installing the software/drivers for the Photosmart 7525?

    Hi,
    You can install more than 1 printer to your computer. They will share few folders including HP Photo Creations product but they should live harmony together.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • My Photosmart 7510 printer only prints in black even when grey scale is turned off.

    Hello
    I am having issues with printing in color. I have a 7510 Photosmart Printer. It has full ink cartridges, I made sure grey scale is turned off, I uninstalled and reinstalled it but it still prints in black. It looks like it is using shades on the of black like its trying to darken the colors that would be there if it printed them. It just recently started doing this. What do I do? 
    Thank you
    EDIT: I am using Windows 7

    Hello @Oldsheep , and welcome to the HP Forums!
    I see you are experiencing print issues.  I would like to help!
    Does this issue occur when making a copy as well?
    I would recommend removing the ink cartridges, and performing a power reset.  Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I would also recommend this document on Fixing Print Quality Problems for the HP Photosmart 7510 e-All-in-One (C311) Printer Series.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • HP Photosmart 7510 printer wireless connection to Mac Book Pro

    My new HP Photosmart 7510 wireless printer won't stay "connected" to my Mac Book Pro.  Every time I try to print, it says it is "looking for printer" and "printer is disconnected."  Sometimes it finds the printer and I get the pages, but several times, it hasn't found the printer at all.  Thanks!

    Hi there clhs,
    Could you provide the community with a little more information to help narrow troubleshooting? How are we connected to the printer USB/Wireless/ethernet?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Wirelessly connecting HP Photosmart 7510 printer to 64-bit Windows 7 computer

    I'm setting up a new printer, and I have never printed wirelessly before. The printer is connected to the wireless network, but the computer can't find it. The printer's wireless network test results show that wireless is working. When I install the HP photosmart software on the computer, and it gets to the "Network Check" window, it just stalls there without finding any printers. Obviously, the computer is connected to the wireless network because I'm posting this online. Seems like the problem is with the printer driver software? I also tried downloading the Home Network Diagnostic Utility. From there I was able to go to the printer page and print a test page. However, I still can't print anything from the computer. If I try to add a printer in the control panel, when I search for network printers the same thing happens. It just stalls there without finding anything. Using task manager to end the program is the only way to close the window once it gets stuck. Any ideas?

    AN IMPORTANT UPDATE!
    I had turned off my virus protection and firewall, and was still unable to connect to the printer, or ping it. 
    I could successfully ping the printer from my router, so I turned the router off and back on, re-configured the wireless setup on the printer, and I am able to connect and print again!
    Even though I could connect the printer to the router, and all of my computers were connected to the internet, something on the router was preventing me from connecting to the printer that was connected to the same network.
    So I've learned that I have a printer that works fine, but I own a crappy router. Hopefully this can help someone else.

  • On a photosmart 7510 printer , where do i select to print in black only.

    On my Photosmart 7510 where do I select to print in black only.

    Hi there,
    Welcome to the forum! What operating system are you using?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • HP Photosmart 7510 not working with Yosemite

    I see that most of the previous complaints are pretty old and here it is now July 2015 and the problem still exists.Surely HP could spend a bit of time recitifying this situation - or do you prefer we buy non HP printers?

    Hi , Welcome to the HP Support Forums! I understand that you would like the HP Software for your HP Photosmart 7510 e-All-in-One Printer, to work on your Mac running OS X 10.10. I would like to assist you with this. The Full Feature Software is available for your printer.Click here to download the HP Photosmart 7510 series C311 Full Feature Software and Drivers.Full List of supported HP Printers that Work with OS X v10.10 Yosemite.Go here for Instructions to: Download and Install a Mac HP Printer Driver and Software.If you need further assistance, please let me know. Hope this answers your question. Thank you for posting!

  • Trying to upgrade a MacBook Pro to snow leopard 10.6.3 and all I get after the upgrade is done is the a blank page with the apple trade mark. I did restart the computer few times and all the same

    Trying to upgrade a MacBook Pro to snow leopard 10.6.3 and all I after the upgrade is done I just get a blank page withe apple symbol. I've rebooted the computer and nothing happens

    Upgrading from which Mac OS X?
    Is this v10.6.3 a retail disc?
    You can purchase Snow Leopard from the Apple online store > Mac OS X 10.6 Snow Leopard - Apple Store

  • Photosmart B8350 Prints page bottom as black block

    My Photosmart B8350 printer sometimes prints what should be blank space at page bottom as a large black block.
    This mostly occurs on the last page of a set, or  the bottom of a single page,  but have had intermediate pages (eg. pages 2 & 4 of 5) that contain text also filled at the bottom as a black block.
    I am printing in the FAST DRAFT MODE, manual duplexing, black/grey cartridge only so as to conserve ink when print when the print color or quality is NOT an issue.  Only needing something readable.
    It would seem that I am defeating the aim of conserving ink if I'm going to get nearly half a page printing as a black block.
    Has anyone else encountered this problem of blank space printing as a black block and what solution(s) did you use?
    Thank

    Try my post for heavy photo papers. http://h30434.www3.hp.com/t5/Other-printing-questi​ons/Solved-All-in-Ones-Misalignment-on-Costco-or-H​...

  • Can a hp photosmart 6510 printer work with a wired pc with a wired router?

    Would the photosmart 6510 e-all-in-one printer work with a old wired pc and wired router?  I do not know anything about wireless.  I have a desktop pc XP HP.  
    This question was solved.
    View Solution.

    Hi,
    Based on the following link:
      http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02907978&tmp_task=prodinfoCategory&cc=us&dlc=en...
    this printer does not have a wired LAN card. Well you have to use wireless or USB.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Can't Connect Photosmart 7510 Printer to Wireless Network

    This printer isn't new, but it's new for me (my mother gave it to me). However, I'm trying to set it up, and I can't get it to connect to a wireless network. When I go into the Wireless Network Setup on the printer, no networks are listed (even though several should be listed, mainly our home network). I tried entering the network information (name & password) manually, and it still didn't work. I've downloaded drivers and all, but I can't complete anything because while the printer is powered on, it's offline. I don't know if the drivers just don't work because I upgraded to Yosemite within the past few weeks (and the drivers are for the OS prior to that one), or what. I can't even begin printing because I'm dealing with this nonsense...

    Did everything you said to do, and still had the same issue. The Wireless Network Test results say the following: WirelessWireless Working - FAILSignal Quality - Not Run ConnectivityConnected - Not RunDisconnect count total - 0Disconnect count (last hour) - 0Disconnect count (last 24 hours) - 0 NetworkNetwork Name (SSID) Found - Not RunOther networks detected matching your network name (SSID) - NoWireless Networks Detected - 0 SettingsPrinter Settings Consistent with Wireless Router Settings - Not RunNo Filtering - Not RunChannel - Not RunSecurity - Not Run

  • Photosmart 7510 - Calendar starts with sunday

    Hi
    i have a 7510 all in 1. The calendar app which allows you to print a monthly calendar sstarts off with Sunday as the first day. How do you change this?
    thanks
    This question was solved.
    View Solution.

    All apps are either HP proprietary, or are created by the company that partenered with HP to create the app.  To the best of my knowlege, HP has not released the language used to write print apps, and does not plan to.  Sorry.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • How do I get efax to automatically print an incoming fax? I am using a Photosmart 7510 printer

    This question was solved.
    View Solution.

    Issues Resolved By Fix:
    Can't Send eFaxes
    Can't Receive eFaxes
    Can't Login to eFax on the front panel of the printer.
    Can't Register eFax on the front panel of the printer.
    When trying to access eFax, it says that the printer is not connected wirelessly.
    When trying to access eFax, it asks that you enable web services before continuing.
    The Fix:
    First, press the ePrint button in the top left hand corner of the screen on your printer to access the Web Services menu.
    Once there, press the “Settings” button.
    If ePrint is turned on, turn it off and then back on. Press the return button and then press “Print Report”.
    If ePrint is turned off, turn it on. Press the return button and then press “Print Report”.
    These steps might sound strange since the issue is with eFax, but eFax works on the printer through the ePrint service.
    If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

Maybe you are looking for

  • Problems with Home Sharing - works with some users but not all

    Hi all, On our Mac we have 3 different user accounts. Among the three, home sharing seems to work for two of them, but not three. For example, if I'm logged into User A's account, I'm able to access the library for users B & C. However, B & C are abl

  • Need conversion from UCS2 to utf-8

    1. I have data in MS SQL server table in arabic in UCS2 format , need to transferr these records to ORACLE 8i table ( of same table structure) in utf-8 format. Friends , is there any tool available to do this. 2. I have above one lakh records of data

  • HT203856 I do not have "share link via icloud" option

    According to this help article: HT203856: iWork: Sharing links to documents in iCloud Learn about iWork: Sharing links to documents in iCloud I should have a "share link via icloud" option on my mac when I hit the share button. I do not have that opt

  • FAST QR Server issue

    Hi, We are facing one issue related to FAST qrserver. Following are the details. FAST version: 5.3 sp4. Issue: The qrserver has been assigned port 15100. When we run the telnet command on the same server where we have qrserver service, the connection

  • Creating an Invoice from XI doesn't work

    I have tested in se37. It works but it doesn't in XI RFC Adapter. All paramters are the same. I have got an exception - The system could not determine the "Ordering Party". Could you help me which parameter is incorrect? I have read notes 206068, 730