After a power outage Apple TV can't find date and time - just keeps spinning on that screen. Tried powering off Apple TV, the computer, and the router. Tried to restart Apple TV. Tried to restore Apple TV, but it got stuck again setting time/date.
After a power outage Apple TV can't find date and time - just keeps spinning on that screen. Tried powering off Apple TV, the computer, and the router. Tried to restart Apple TV. Tried to restore Apple TV, but it got stuck again setting time/date.
Welcome to the Apple Community.
Along with the things you have tried, some have had success setting the location to the US.
Similar Messages
-
My new apple tv can't find its bluetooth connection, just keeps searching
My new Apple tv can't find its bluetooth connection, just keeps searching,
Seeing as MobileMe is being discontinued with no information from Apple as to whether or not galleries will be retained, there may be little point investing time in creating new ones from now on.
Photostream alone will not cut the mustard.
AC -
I am trying to use my adobe premiere elements 12 and when I go to click on a "new project" it takes me to the sign in page. Once I type my information in and click on "sign in" a little 'thinking circle' pops up and it just keeps spinning but it never ends up doing anything. Please help me with this issue. I really need to get this project started like yesterday. Thank you.
dplum12
What computer operating system is your Premiere Elements 12 running on? Did you have the opportunity to update 12 to 12.1 Update yet using an opened project's Help Menu/Update? If not, please do so when you get the opportunity.
For now I will assume that your computer is Windows 7, 8, or 8.1 64 bit. Please try the following suggestions to overcome your Premiere Elements Sign In issue.
http://www.atr935.blogspot.com/2014/04/pe12-premiere-elements-12-editor-will.html
and, if you get any messages about Internet connect and the computer clock, please review the following
http://www.atr935.blogspot.com/2014/04/pe12-sign-in-failure-connect-to.html
Please let us know the outcome.
Thank you.
ATR -
Please help. My gmail app on my iPad 2, has been frozen since a power outage that occurred last week.I am a verizon fios customer. I tried to correct this problem through settings without success. Thanks for any info you can share.
Try a Reset [Hold the Home button (bottom centre) and Sleep/Wake button (top edge, right) down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is app and data safe!
-
unable to get a network
MMaybe it is defective or your phone isnt registered right. Did you contacted the provider virgin? it uses cdma network.
-
I guess I have more then one Apple ID accounts and I own a little money on both and I am willing to pay and when I try to update and put my new payment method in my iPhone it tells me I need to contact iTunes support, the apple id I'm useing now is xxxxxxx and I know that I had one with xxxxxxx but apple won't let me use that one anymore it just say account nolonger promitted. Please help
<Edited By Host>Have you contacted iTunes support ? If not then you can do so via this page (these are user-to-user forums, and I've asked the hosts to remove your email addresses from your post) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
-
Apple TV says it is updating date and time after a power outage. But the wheel just spins and nothing happens.. The software is updated and my wifi router is on and working fine and recognized by the Apple TV. How do I get Apple TV to work again?
Thanks for the tip. Unfortunately "Restart" did not change the situation. I then used the "Restore" option. After about 45 minutes of the unit going through the process, Apple TV was up and running again.
-
I have a 27in Mac desk top, its about a 2009, after several power outages and the computer pluged up and on now when turn it on it shows a white screen, apple in the center and a time strip toward the bottom when the time strip goes to the end of the cycle it shuts its self off.
The only thing we have tryed which was from a forum which was simular problem was, command-option-p-r, hold them down til the screen was back up, we try several times it did not work, please,please some-one help we use this computer for our job.Also the trick you used, is known as resetting the PRAM. Not always the best of ideas for Macs older than 4 years. But I'm glad it worked for you. There is a battery which will eventually need replacing inside that would actually make that technique stop your Mac from working until replaced.
-
Apple TV I have to re-start after every power outage. Is this normal? I have gen 3
After all power outages. I have to re-set my Apple TV. Is this normal? I have had this device for 8 months and its become a pain!
Many thanks guys for the response. there are still problems that i didn;t put here: 1: Storage (USB) is really slow; 2: Config restore is not working (I used to think this is not a problem while i changed my mind after reading some of the search results of the product); 3: Device will get back to work after power outage ONLY if you leave everything to be factory default, as long as you changed ANY setting, you lose your connection after power break. I will return this piece, and go back to D-link. I bought this router for my boss and i can not afford losing my job because of it. Sorry for this decision in Linksys forum, but, it leaves me no choice.
-
I have a Mac Pro 5.1 and after a power outage my usb ports on the back of the tower do not recognise the apple usb keyboard upon start up. If I leave the plug out and then insert the keyboard after start up it works fine. The same happens with the front usb ports. How do I fix this issue?
System.log says USB related message?
Resetting SMC as well as NVRAM could solve the problem.
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM -
This is driving me crazy. Is there anyone running Mavericks as a mission critical server on Backup Power Supplies that has a way to get the servers to restart automatically after a power outage. The UPS vendors all have software for Windows, but not Macs, and the setting in System Preferences, doesn't work with the UPS's Iv'e tried (2 different APC models (Smart and Back-UPs), one Triplite (Smart) and one CyberPower, (all claiming to be Mac compatible))
APC do apparently still do a command-line daemon (PowerChute Network Shutdown) which monitors over the network the UPS and will cleanly shutdown the Mac. For lower-end UPS devices these are typically connected via a USB cable and the built-in Apple System Preferences let you control the options - if it is a model supported. There is however a big limitation of using a USB connection which is that you can only connect a single computer to a UPS via USB and of course most companies have multiple servers.
It maybe that what is happening even if you use APC's software is the following -
Power failure detected by UPS
Signal sent to Mac
Computer does a clean shutdown
Power restored
UPS has no way to tell Mac because it is shutdown and Mac does not support 'Wake on LAN' if fully shutdown
The Mac does have an option to 'Startup automatically after a power failure'. However this might only take place if the Mac is not cleanly shutdown, it could be that if the Mac is cleanly shutdown it does not count this as a power failure. If this is correct then there is nothing that can be done as users to resolve this, the only way it could be resolved would be if Apple provided a way for a tool like APCs software to both do a clean shutdown and set a flag as this being due to a power failure so that when the Mac does detect the power being restored it triggers the Mac in to booting.
In the dim and distant past when Macs used ADB to connect keyboards and mice the ADB interface did support an external power-on signal. This does not exist for USB.
Personally I have regarded the APC software (PowerChute Network Shutdown 3.0.1) to be so badly supported and so old as to be too risky to use. It lists 10.7 and 10.8 but not 10.9 and uses Java 1.6 which itself is unsupported. There is a third-party tool you might want to look at called NUT (Network Ups Tools) see http://www.networkupstools.org
NUT is free and lets you do clever things like -
Connect a single computer via serial or USB to the UPS
Act as a 'server' over the network to other computers sharing the UPS
When power failure is detected the NUT 'server' sends a signal to the NUT 'clients' so all of them know that there is a power failure and can do their own clean shutdowns
This gets round only being able to connect a single computer via USB. -
How do i restore my iphone from "no Service". I tried to update my iphone 3G TO iOS 6.0. But it got stuck and now my itunes is displaying Error message: "there is no sim card installed in the iphone you are attempting to activate" and my iphone is without service. While i am trying to activate my ihone on wifi also it doesnt saying servers are temporary unavailable try after sometime. Kindly suggest
tariqrehmani wrote:
How do i restore my iphone from "no Service". I tried to update my iphone 3G TO iOS 6.0. ...
The iPhone 3G is Not Compatible with iOS 6...
It also appears that your phone may have been Hacked and / or Jailbroken...
If this is the case... you are out of luck... Because...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
Why Jailbreak is Not Supported > http://support.apple.com/kb/HT3743 -
My printers are missing after a power outage.
This is now the 4th time this has happened, but this time I have at least what I believe to be a cause. After a power outage of about 30 seconds this past thursday all of my printers attached to my imac have disappeared. Not only this, but when attempting to even press cmd p from any program that I could possibly print from slows down the system to a crawl, and eventually crashes. When going through system preferences the printers menu takes about 10 minutes even come up, and when it does, it's empty. When attempting to add a printer back the system once again slows to a halt eventually not responding. I've tried restarting multiple times, making a new user account (which worked for about 3 months the previous incident happened.) The only thing that has fully fixed this problem in the past was to re image the computer.
Any help would be great.Try resetting the printing system OS X Mavericks: Reset the printing system
if that doesn't help you may need to reinstall OS X. Consider getting a UPS if power outages are that common in your area. -
ok, so heres my problem . I have this ipod touch 4g and i was updating it to the newst version and the screen turned white i tried connecting it to the computer and nothing i pressed the home and main button but still nothing i dont want to pull it apart or anything but please help what do i do
Let the battery fully drain. After charging for an hour try the reset (both buttons) and restore as necessary.
-
my new iphone 5 is frozen, with the cord to computer symbol on the screen after failing to finish updating to ios 7. iTunes no longer sees the phone. I've tried rebooting the computer, rebooting the iPhone, but iTunes still doesn't see the iPhone.
If your computer doesn't see the phone when you plug it in, you may have to take it to an Apple Store.
Maybe you are looking for
-
Secure link to iTunes failed - how can I fix this?
Help! It reads "Secure link to iTunes failed" - how can I fix this?
-
HT6207 After 2014-002 update my MBP lost my home wi-fi network. How do I fix it?
After 2014-002 update my MBP lost my home wi-fi network. How do I fix it?
-
TIFF - Need to set Whiteiszero (JAI)
Hi, I manipulate images, if it's a RGB picture, I change it to a gray scale and I change it again to a 1-bit pictures (bilevel). When I save this picture to a tiff, JAI set it's Photometric param to Blackiszero but I want to encode my picture with Wh
-
Bcp doesnt throw an error when the data length exceeds size of the column
Hi, We are using bcp in SQL 2008 R2 to import the data from flat file. When the data length exceeds the size of the column, it doesn't throw any error instead it has ignored the row. Please suggest me how to truncate and load the data into table. Tha
-
When verizon connected to my computer the installer did not connect to wireless, now I cannot connect my Kindle or other wireless devices , can some one tell me how to connect my wireless router to my computer?