After a rescent update on my ipad 3 Ican no longer connect to my pc with WIFI. I have tried resetting ipad and itunes but nothing works. Talked to support and they were no help. Any suggestions?
After a rescent update on my ipad 3 I can no longer connect to my pc with WIFI. I have tried resetting ipad and itunes but nothing works. Talked to support and they were no help. Any suggestions?
What error do you get if any?
Have you tried connecting to another network besides your own?
Do you use DHCP on your router or static IP address?
Similar Messages
-
Help?
- Have you tried another cable and USB port?
- See if placing the iPod in DFU mode will allow iTues to see the iPod
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Try here:
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
- Try on another computer to help determine if you have an iPod or computer problem -
I can connect my Iphone 6 and Ipad Air to my Bose Soundlink but not my IMac. I have tried all the usual solutions but nothing works. It has worked recently but not in the last week. Help
make sure it's not being connected to by any of the other two
one can only connect 1 device at the time and just by waking up sometimes a headset connects to a device
automaticly
then forget the bluetooth device in OS X and put the headset in pairing mode / discovery mode and connect with it once again with the mac -
I have an iPad two and my front camera doesn't work I have tried resetting it Clicking it twice nothing works can you please help me!!??
Try closing the Camera app:
1. Double-click the Home button to reveal the Task Bar
2. Hold down the Camera app for a second or two until you see the minus sign
3. Tap the minus sign to close app
4. Tap area above Task Bar to return to Home screen
If the above doesn't solve the problem, do a reset:
Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider -
The wi-fi in my iphone 4S is 'greyed out' and i am not able to switch it on. I have tried resetting the network settings but nothing happened. I can't even download the new iOS7 version as it requires WI-FI to do so. Please help.
I had same problem. I removed the back cover, and warmed wi-fi module by hairdryer of my wife). five days wi-fi works great. I do not know what will happen next.
during operation iphone must be turned off. time of heating is near five minutes. wifi module is located upper the battery, on the upper right corner of device. -
As soon as i type a letter in fire fox it stops working, i get (FIRE FOX IS NOT RESPONDING, WINDOWS IS NOT INTERACTING WITH FIREFOX) I have tried all i can and now give up. Ive cleared all cookies and catch, etc i have gone in to help and tried out instructions for the not responding but no luck. I have windows 7 and have not had problems in the past with firefox. I have uninstalled and reinstalled still no luck.
go to '''TOOLS '''then '''OPTIONS''' then '''ADVANCED''' then '''NETWORK tab''' then '''SETTINGS tab''' and select the options '''NO PROXY''' click '''OK''' and '''OK '''again in the next screen. With that you have disabled the proxy settings.
''if you like to not disable the proxy settings choose'' : '''Auto-detect proxy settings for this network''' (it is in the same session)
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem. -
New Ipod was accidentally locked with an unknown passcode - have tried restore process in I Tunes but still cannot unlock passcode - any suggestions?
You'll need to put it in dfu recovery mode, then do a restore. That will set it back to it's "out of the box" condition, without a password, then you can sync with iTunes...Here is an article that describes the process...
http://osxdaily.com/2011/01/16/forgot-iphone-passcode-how-to-reset/ -
I have an iMac G4 with AirPort with OS 10.4.11 installed. I keep getting an error message "There was an error joining the AirPort network "ATT5216." I called ATT U-verse - they were stumped. Any suggestions?
I checked for the IP address, and I'm not pulling one
up.
That's the problem. Even with no base stations available you should eventually within a few minutes get a self-assigned IP of 169.x.x.x!
http://docs.info.apple.com/article.html?artnum=106659
Maybe you could manually configure an IP but that doesn't answer what's wrong. How about a simple test - create a new Location in Network System Preferences and see if that helps. If it doesn't then maybe a re-install of Airport or System software would help. If the Airport shows up as an available network port then the card is probably OK. -
After the recent update of iOS 7.0.6 my phone is having issues with wifi connectivity. It gets disconnected most of the time. I went through support page and done with "Reset Network settings" too but it doesn't help. It is very toublesome while watching videos, sending pics, chatting and so on. Please advise.
It works fine in LTE network. The problem is with WIFI only.
Thank you.Hey Siddh.s!
Here is an article that will help you troubleshoot this issue with your Wi-Fi connections:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
Ever since I have updated my software to iOS 7, I cannot download anything from the AppStore app and I have tried resetting my password and updating ITunes, but nothing works! Also when I try to sink my mini with my iTunes account it says you cannot sync because the sync session failed to start.
It sounds like to me you're trying to sync using the computer.
Try these things and see if it helps before you try your next syncing session. If none of the things below work then you might consider trying to sync using iCloud only.
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/ -
I tried updating my iPhone3g through itunes. Now i'm stuck in recovery mode and i've EVERYTHING even websites and such but nothing worked out! I've also tried restarting and fiddling with the home button but nothing still worked. Please help! What should I do??
Well, if you've indeed tried EVERYTHING, then you'll need to bring your phone to Apple for evaluation.
-
Brand new iPhone 4 (unlocked), got it activated yesterday, and speakers doesn't work, did restore back to factory settings, not luck, any suggestions. This iPhone was purchased in US, currently in India, will Apple support in India?
There are many threads on this forum regarding speaker not working issues. You might try searching them. Hopefully you'll find the answer you need.
BTW, the iPhone only has ONE speaker. -
At the top of my iPhone 5 it has been saying searching for hours and won't go away I have tried cleaning my SIM card but nothing seems to work any advice?
Hey Savannahgrace321,
It sounds like you are experiencing an issue with service on your iPhone. I have an article for you that will help you troubleshoot this issue:
If you see No Service in the status bar of your iPhone or iPad - Apple Support
http://support.apple.com/en-us/ts4429
Thanks for coming to the Apple Support Communities!
Cheers,
Braden -
When I try to install Itunes, I get this error: (translated from Norwegian) There was a network error while trying to read from the file: C: \ windows \ installer \ iTunes.msi I have tried many times to reinstall, but nothing helps, please help me.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
My macbook pro no longer connects to my TV with the mini dvi to hdmi adapter. A while ago the computer fell down and hit the cable. How can I tell if the computer is working ok. Doesn't show mirroring any more. Was working while watching a movie but when I pulled it out from the computer and put it back in the system would no longer mirrorr the screen on the TV.
The best option is an appointment at an Apple store genius bar. The evaluation will be for FREE!
Ciao.
Maybe you are looking for
-
Document type to be set blank in transaction code mr41,mrhr
Hi, I want to set document type and currency field as blank whenever the user go for the transaction MR41 and MRHR. At present whenever user enter transaction MR and MRHR these two fields display some value which is there in memory id, i want to set
-
Safari 6 lost audio in HTML5 videos
I used to be able to play HTML5 videos in Safari without a problem--but as of the past week or so, I get no audio. I did a couple of courses through Coursera this summer and the HTML5 videos worked fine. But now that I've started new courses, I have
-
Runtime Error while trying to run the Requestor ABCS Process
Hi Everyone, I'm currently working on POC to Query Customer using AIA. Created Target Service which is Composite BPEL process to Query the data from the E-Business Suite. Deploy the the same to SOA and AIA MDS. Created Provider ABCS and deployed the
-
for my HD video footage I need a 4 way raid 0, my question is what kind of raid controller cards are there for a mac pro is it only ATTO? CORE
-
How do I find out the answers to my security questions?
I cannot remember the answers to my security questions and am unsure how to fine the answers/reset them. Would be great if someone could help! Thanks