After a restart the screen is green

Ipod touch will not restart....get a pick screen try hard restat then get a green screen - any ideas

I have found the solution to my problem, if others need this information.
I was using Internet explorer.That was the problem. I dont know why, but internet explorer doesnt have that tab in its settings to disable the hardware acceleration.
Solution:
Download firefox. They have that tab to disable hardware acceleration. I didnt have any green screen problems after.
I dont know why any tech specialist here couldnt tell me this simple piece of information before.
I had to find it out for myself...
Such a simple solution to a simple problem...

Similar Messages

  • Last night I was installing the iOS 6 update on my ipod. I noticed it was taking way too long so I hit the home button and the ON/OFF button in ordered to restart it. After it restarted, the screen went blank and has been like that since.

    Someone please help me!

    Plug it into iTunes and hold the power and home buttons down for about 10 seconds, then release the power button but continue to hold the home button. That should put it in DFU mode. iTunes should recognize that and ask if you want to restore.
    ~Lt. Leviathan

  • When i open my computer I get the white screen with apple symbol and there are vertical lines all over the screen with green pixels and after a few minutes the screen gets grey and I get message to restart my computer what happens

    3 years ago I bought an IMac Desktop that I am using for a lot of things but the most important for dvd montage in Imovies and Idvd.
    Now today when I opened my computer I get as usual the white screen with the Apple symbol but there were all over the screen vertical lines with green pixels and after a while the screen gets grey and I get message to restart my computer using the power button or the restart button and when I do so each time the same is happening somebody can tell me what is happening and what caused this. This computer is my work and now I have no income anymore.
    On the Apple support site they are asking to enter the serial number and when I do so I get message it is wrong but it is the only one I have and I buy this computer in Cairo Egypt. I am living in Hurghada in Egypt for the moment. When I call the technical support of the shop where I buy it they are telling me that it is the hard disk or ram and that I probably lost everything on it and they are asking a big amount to repair.
    Can somebody advise me on this matter. Thanks in advance

    You can find the serial number either in About this Mc in the Menu bar under the , or it should be on a sticker under the foot of the machine.
    If you have the install discs, try booting from them, holding down the c key and then using Disk Utility to check the drive. 
    You can also boot into Safe mode
    To start up into Safe Mode (to "Safe Boot"), do this:
       1. Be sure the computer is shut down.
       2. Press the power button.
       3. Immediately after you hear the startup tone, press and hold the Shift key.
          Tip: The Shift key should be held as soon as possible after the startup tone but not before.
       4. Release the Shift key when you see the gray Apple and progress indicator (looks like a spinning gear).
    During the startup in Mac OS X 10.2 through 10.3.9, you will see "Safe Boot" on the Mac OS X startup screen.
    During the startup in Mac OS X 10.4 or later, you will see "Safe Boot" on the login window, which appears even if you normally log in automatically.
    Please post back with results,
    To leave Safe Mode in any version of Mac OS X, restart the computer normally, without holding any keys during startup.

  • After stand-by mode screen turns green or the graphics get messy - Satellite M100-165

    When i leave my laptop for more than 20 minutes on stand by mode and i try to activate it again the screen turns green or the graphics get messy.
    In order to work i have to reset and turn on again. Does anybody know what can i do about this issue?
    Thanks in advance.

    Very strange your description.
    Did you try to update the BIOS or the graphic card driver?
    If not so please check the available versions on the Toshiba driver page and if these applications are newer so try to upgrade it.

  • No video as the screen turns green.

    When trying to watch a video, as in tech support and movies,  the screen turns green.

    Hi,
    Try the following first.
    Start a video playing.
    Right click on the video ( green screen ) and select Settings.
    Remove the tick from the box next to 'Enable Hardware Acceleration' and then click close.
    Refresh the current page and see if the video now plays Ok.
    If the above fails to correct the issue, try a clean installation of the flash plugin/ActiveX as follows.
    First, download the Flash uninstall utility on the link below and save it to your Downloads folder.
    Flash Player Uninstaller.
    When the download has completed, close all browser windows, open your Download folder and run the uninstaller.  After this has completed, restart the PC.
    When windows has reloaded, download and install the latest version of Adobe Flash.  Note: You may want to deselect the option to include McAfee Security Scan Plus before downloading.
    When the installation has completed, restart the PC.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • I updated my iMac to 10.7.3 and about an hour later the screen began to flicker with a gray line on the upper side, and it also flicker green and red small pixel lines all over the screen, mainly green.

    I updated my iMac to 10.7.3 and about an hour later the screen began to flicker with a gray line on the upper side, and it also flicker green and red small pixel lines all over the screen, mainly green. The computer froze with these pixels, so I shut it off and restarted it, and there were this green lines everywere. So I turned it off, and the next day I turned it on and it began to work just fine, but suddenly the same thing happened again, and when I restart the computer again there are these green and some red pixels everywere.
    I've read 10.7.3 is giving people many problems, but I never saw that it gave one like this. How can I fix this, or what will Apple do to fix this problem they caused me with their update.
    Thanks

    Contact Apple Service, iMac Service or Apple's Express Lane. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you're eligible for onsite repair since yours is a desktop machine.

  • Uploaded a performance video on actors access, but cant view it on my pc. I get the audio, but the screen is green. It does come up on other computers, but not mine. Any explanations?

    uploaded a performance video on actors access, but cant view it on my account. I get the audio, but the screen is green. It does come up on other computers, but not mine. Is it my quicktime's not downloaded or upgraded?

    Open your QuickTime control panel (either via the Control panels, or by going "Edit > Preferences > QuickTime Preferences" in the Quicktime Player). In the Advanced tab, uncheck Enable Direct3D video acceleration:
    ... and click OK. Quit and restart the QuickTime Player prior to checking to see if the settings change has had any effect.

  • HT4356 Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example. What can I do?

    Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example.
    <E-mail Edited by Host>

    It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
    I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
    So what to do, what to do.
    Well there is hope for you as long as the drive wasn't Filevaulted.
    I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
    When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
    Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
    The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
    It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
    So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
    The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
    So what you will have to do is this:
    Create a data recovery/undelete external boot drive
    or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files.

  • HT1339 My ipod was not recognized by itunes and not does not power on after I restarted the ipod service in the Windows admin tools. I cannot restore the ipod since it is not recognized by my PC now. Any suggestions?

    My ipod was not recognized by itunes and not does not power on after I restarted the ipod service in the Windows admin tools. I cannot restore the ipod since it is not recognized by my PC now. Any suggestions?

    Time to replace it: $49 2nd Gen shuffle at online Apple Store...

  • I started making a movie and all was well. I added a few more pictures and some sound and played it back. It plays so far and then the pictures break up into colors and then the screen turns green.  The sound continues.

    I am making a movie from still pictures. I used no theme and then started adding pictues. When I played it back, all was well. Then I added a few more pictures and some sound. When I play iot back it plays just so far and then the sound continues, but the screen turns green or the pictures break up into colors.

    Sorry, everyone.  I think I may have figured out what it was all down to...........
    I had left the IDE ribbon cable plugged into my third HDD, with the power cable unplugged.  I did this so as not to endanger my years of work on the third drive, until Windows had setup.  I have in the past, accidentally chosen the wrong partiton to format, so this seemed a good way to avoid it from then on.
    This was not a problem on my old system, but it seems this system doesn't like it.
    I must have left the drive completely unplugged, the times Windows did setup.  Amazing really.  I couldn't see the woods for the trees.
    Anyway, I'm sorry to have bothered everyone with my problem.
    Cheers
    Marcus
    edit :   Sorry Syar2003, I didn't see your reply until I had posted mine.  Many thanks for taking the time to try and help me, it seems as though I may have sorted it now.  I am using IDE drives until I can afford SATA.  But many thanks for the heads-up on the NF4-SATA compliance, I'll be sure to bare that in mind.
    I didn't actually check the NVRAID/IDE ROM version before updating the bios, so I have no idea if the revision was changed when Liveupdate flashed the Bios, I'm afraid.  I didn't know they would be updated at the same time.
    Again, cheers
    Marcus

  • Whenever i try to watch one of my downloaded tv shows or movies the screen turns green and i can only hear audio

    when i try to watch a downloaded movie or tv show the screen turns green and only audio plays

    This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Mac forum.
    Regards.

  • . When I go into facebook and try to watch a video , the screen turns green.

    I have a HP 23 P114 all in one computer. When I go into facebook and try to watch a video , the screen turns green.  How can I correct this? It comes with Adobe 17?
    What can I do to correct this.

    Hey @billnaboo ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue with the Video not working correctly or green. Try clicking on the green screen, in the tab named Local Storage and put 10 KB and the green screen should disappear.
    Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating as the graphic driver could need updating.
    Have you tried another browser? This link will help you update your browser if needed.
    Let me know how this goes.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • When I try to play a video(any video)the screen turns green and then shows a distorted picture

    When I try to play a video(any video)the screen turns green &amp;plays a very distorted picture picture.

    What is your operating system?  If Windows, see http://forums.adobe.com/thread/945765

  • When I watch any kind of video the screen turns green, what should I do?

    When ever I watch a video of one I video taped or one on YouTube or a music video the screen turns green. How can I stop my iPhone from doing this?

    Most YouTube content requires Flash. Apple does not support Flash for iOS devices.
    Try using the pre installed YouTube app. 

  • TS3354 Cant view videos because the screen goes green

    Hi i cant view my videos properly i bought them a few years now and have bought a new mac this time last year, but when i try and view any of my videos i bought the screen is all fuzzy and flicks onto green and slows down?? help

    Hi @Sandyparm  and  @Darbie ,
    Welcome to the HP Forums!
    It is a great place to find answers and tips!
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I grasp that both of you are having an issue viewing videoes   You hear the audio in but the screen remains green.
    Here is a link to Resolving Video and Graphics Issues that will assist you in overcoming this difficuty.
    Here is a link to a YouTube video which is also helpful.   YouTube Green Screen Playback Problem FIX.
    Best of Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Maybe you are looking for

  • Formatting a PC-formatted External Hard Drive to work in Mac OS

    So I have a 300 gig external hard drive formatted for Windows XP with NTFS. I recently got a Macbook Pro and as it stands in Mac OS X the hard drive is read only. I can copy files from the hard drive to my Mac, but I can't edit files on the external

  • Converting seconds value to a date

    Hi, I have date column as integer like 1212638737.Could anyone tell me the way of converting this value to corresponding date value?

  • HTML  Parsers and reading all files in a directory

    Hello all, I was wondering if there was a html parser included in java. I am writing a program where I want to be able to search all the files in a directory tree for a particular string. I was able to read one file in a single directory but not in a

  • Request.setAttribute with strings that hold URLs

    Hi, In my servlet I do request.setAttribute(stringKey,stringValue) and then dispatch to a jsp. In that jsp I use the attributes with value = request.getparameter(stringKey) and value I use in <c:import> tags. This value is a string that holds complet

  • When saving a record it is displaying 2 records saved

    Hi When saving a record in a form it is displaying 2 records saved. On further analysis I found that "when new record instance" trigger is doing some validations and forcing form to think that there is a record updated though it is not so. what code