After a synchronization Icaqnnot connct to internet. What can be the reason

I have synchronized my iPad. Unfortunately since that time I cannot connect to internet although the signal quality is shown as very good.
Hat anybody an idea what I can do?

Hi,
SQL in trigger reults into 'Y' i.e. it is returning row when run from backend.
So, it should Null out credit invoice line id. But it soes not work.
My requirement is to Null out credit invoices which are on Order lines (OE_ORDER_LINES_ALL),
Basically, the fuctionality is to copy order from an existing source order.
Once it is copied, it should null out credit invoice id which does not exist on source order too.
Please find the details of the tables:
desc oe_order_headers_all
Name Null Type
HEADER_ID NOT NULL NUMBER ORG_ID NUMBER
ORDER_TYPE_ID NOT NULL NUMBER
ORDER_NUMBER NOT NULL NUMBER
VERSION_NUMBER NOT NULL NUMBER
CREATION_DATE NOT NULL DATE
CREATED_BY NOT NULL NUMBER
LAST_UPDATED_BY NOT NULL NUMBER
LAST_UPDATE_DATE NOT NULL DATE
CANCELLED_FLAG VARCHAR2(1)
OPEN_FLAG NOT NULL VARCHAR2(1)
BOOKED_FLAG NOT NULL VARCHAR2(1)
ORDER_CATEGORY_CODE NOT NULL VARCHAR2(30)
desc oe_order_lines_all
Name Null Type
LINE_ID NOT NULL NUMBER
ORG_ID NUMBER
HEADER_ID NOT NULL NUMBER
LINE_TYPE_ID NOT NULL NUMBER
LINE_NUMBER NOT NULL NUMBER
INVENTORY_ITEM_ID NOT NULL NUMBER
SHIPMENT_NUMBER NOT NULL NUMBER
CREATION_DATE NOT NULL DATE
CREATED_BY NOT NULL NUMBER
LAST_UPDATE_DATE NOT NULL DATE
LAST_UPDATED_BY NOT NULL NUMBER
LINE_CATEGORY_CODE NOT NULL VARCHAR2(30)
OPEN_FLAG NOT NULL VARCHAR2(1)
BOOKED_FLAG NOT NULL VARCHAR2(1)
desc OE_TRANSACTION_TYPES_ALL
Name Null Type
TRANSACTION_TYPE_ID NOT NULL NUMBER
TRANSACTION_TYPE_CODE NOT NULL VARCHAR2(30)
ORDER_CATEGORY_CODE VARCHAR2(30)
START_DATE_ACTIVE NOT NULL DATE
END_DATE_ACTIVE DATE
CREATION_DATE NOT NULL DATE
CREATED_BY NOT NULL NUMBER
LAST_UPDATE_DATE NOT NULL DATE
LAST_UPDATED_BY NOT NULL NUMBER
Thanks & Regards,
Sumir

Similar Messages

  • What can be the reasons of diffrence in value generated using mb5l and f.01

    what can be the reasons of difference in value generated using mb5L and f.01
    when we use mb5L for stock taking and when we use f.01 for same purpose what could be the reasons if the value donot match. that i.e stock taking donot match in mm and fi.

    Hi,mau be you doing smt wrong in selection screen?by the way,in mb5l acumulated balance!

  • What can be the reason behind getting the Dialer Detail

    what can be the reason behind getting the Dialer Detail
    CallResult = 2 "Error condition while dialing"

    Sorry buddies, for bothering you, without providing enough details.
    We are running Java based ERP for our client, with Oracle Application Server 10.1.3.1.
    OS is Sun Solaris 10
    Database is Oracle 11g
    We found the following errors in /product/10.1.3.1/OracleAS_1/Apache/Apache/logs/error_log file.
    [Mon Jun  8 11:01:41 2009] [error] [client <ipaddr>] [ecid: 1244439100:<server ip>:17034:0:70,0] mod_oc4j: request to OC4J iisapp:8890 failed: AJP error: bad header
    [Mon Jun  8 11:11:36 2009] [error] [client <ipaddr>] [ecid: 1244439685:<server ip>:16312:0:2255,0] request failed: error reading the headers
    [Mon Jun  8 13:25:52 2009] [warn] [client <ipaddr>] oc4j_socket_recvfull timed out
    We have done the following changes recently
    => KeepAlive TImout changed to 5 secs from default 15
    => Changed the MaxPermSize to 512M in opmn.xml
    => Our Max Clients setting changed to 350 from default 150.
    Can someone help us by providing the possible reasons for the occurence of said errors.
    Regards,

  • Fonds look great. The moment I publish it all looks different. Color, size... What can be the reason?

    iWeb worked just fine. But now I have a problem after publishing. It all looks fine but going on Safari changes all. Any idea what can be the problem?

    You would need to post the URL to the published site to get help.

  • TS4148 on my iphone network loosing and no service appears .what can be the reason

    hello
    on 2g network selected condition all of sudden network signal missing and no service displays .what can be reason please

    i have an iphone 5 its practically new and after a week or so i am using my iphone and suddenly from nowwhere a purple spot comes out on the bottom right corner of my screen i havent dropped it or anything can someone help me????

  • Matlab routine within labview cannot get input after a few hours of use. What can be the trouble?

    I have a Matlab-within-Labview application that needs to run 30-40 times in a row. However after let's say 10 runs I get error 1047, that is, there is no communication between Matlab and Labview. I have to reset the computer to start re-running the application without problem. Note that Matlab is open on this computer all the time.

    Hello,
    The only information I could find on this from NI or MWorks is that MATLab must be running in order for LabVIEW to access the Matlab server. I would check to see if there is anything specific happening inbetween the 10 and 11th runs that causes the link between the Matlab server and LabVIEW to break, isolate where this happens and try to work from there.
    Doug

  • My own website has a navigation bar-in firefox the options does not open a nwe page. IN IE it works perfect. What can be the reason ?

    the website : www.regiokoor.nl is ok in IE and in firefox the navigation bar does not work. I cannot open other pages then the home-page.
    What do I wrong ?

    Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. <br />
    http://forums.mozillazine.org/viewforum.php?f=25 <br />
    You'll need to register and login to be able to post in that forum.

  • What can be the reason for an iOS app not to open ?

    I've built an app and it doesn't open .

    I used the debugger and it told me the following :
    terminate called after throwing an instance of 'NSException'
    Program received signal:  “SIGABRT”.
    kill
    quit

  • ALL IP SLAs to dmVPN spokes give invalid RTT=1 . Nodes use NTP. What can be the reason for this?

    IP SLA Measurements are invalid. RTT should be 20 to 60ms, but IP SLAs deliver RTT=1ms. This applies for UDP Jitter and UDP echo IP SLAs.
    Nodes use NTP time.

    you can use any router you want - I use a netgear others belkin - up to you.
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Someone have problema with ios 5.1 on ipad2? My ipad is breaking down some apps, and sometimes it  crashes! what could be the reason? I havent been jb it!

    Ipad 2 slowing down on new ios? What can be the reason?

    Force close the App Store app and reset the iPad. No data will be lost when you reset the device.
    In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • HT1386 Cannot sync only my contacts what can be the cause

    connecting my I Phone via USB it sync OK except my contacts that cannot be sync giving message
    "ITune could not sync contacts to the I Phone because an error occured while sending data from the I Phone "
    What can be the reason.
    Thanks
    Menachem

    Does the error give you a number? This a Mac or Windows PC?  Does the computer, if Windows, use Outlook for it's contacts?   Too many variables to change the answer.  You need to give more details.
    Try another route and sync contacts through iCloud.

  • Pse trial v12 installed but when opening the editor it shuts down after 2 seconds, what can be the problem? I have windows 8.1 64 bit with the latest video drivers installed. Thanks

    PSE trial 12 installed just fine but when i start the editor it opens and shuts down after about 2 seconds without an error, the only thing that appears is a message with 'continue trial'.
    I have windows 8.1 64 bit and i already installed the latest video drivers, intel hd 4000 and nvidia geforce 710M.
    I also installed premiere elements version 12 with the same problem.
    What can be the problem here, please help?
    Thanks.
    Wim.

    Hi roberto-
    Yes, its a shame. I have also contacted lenovo support hoping that they can sort out this problem. However, first response from them was 'contact your internet service provider since internet connectivity goes down'! :-/ I am hoping I have been able to get through to them now at least about where the problem lies. I wonder if anyone has tried using the laptop with the same broadcom wireless adapter with some other version of OS (linux, windows 7 etc.) and whether they still face the same problem. I haven't tried that yet. If this is just an OS / driver issue I hope someone somewhere is working on a fix! If not, I guess the only other solution would be to get an external USB wifi adapter but that is not something one would want to do when you buy a brand new Lenovo laptop. This was a big let down for me.
    -sag

  • I have a problem with youtube...i can't watch some videos from youtube! They stop after few seconds of playing!! what can i do to fix it?

    I have a problem with youtube...i can't watch some videos from youtube! They stop after few seconds of playing!! what can i do to fix it??

    Try loading the same video in different browsers (Firefox, Chrome, Safari and Internet Explorer are your best options). If the issue is across all of them, make sure you've downloaded the latest version of Flash at http://get.adobe.com/flashplayer/
    If it's still stopping after that...Do the tried and tested method for everything: reset your router.

  • I can't connect to Wi-Fi - keeps timing out. No problem connecting from other laptops / phones. Stopped working after I did a system upgrade. What can I do?

    I can't connect to Wi-Fi - keeps timing out. No problem connecting from other laptops / phones. Stopped working after I did a system upgrade. What can I do? I am on OS X Yosemite.

    Take each of the following steps that you haven't already tried, until the problem is resolved. Some of these steps are only possible if you have control over the wireless router.
    Step 1
    Turn Wi-Fi off and back on.
    Step 2
    Restart the router and the computer. Many problems are solved that way.
    Step 3
    Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
    Step 4
    Run the Network Diagnostics assistant.
    Step 5
    In OS X 10.8.4 or later, run Wireless Diagnostics and fix the issues listed in the Summary, if any.
    Step 6
    Back up all data before proceeding.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
    Step 7
    You may need to change other settings on the router. See the guidelines linked below:
    Recommended settings for Wi-Fi routers and access points
    Potential sources of interference
    Step 8
    Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
    Step 9
    Reset the System Management Controller (SMC).

  • My tel Goes after 10 minutes offline, apears à enige Apple, and i have to unlock again. People are not able to call me while THE Apple apears. Question what can be THE solution ?? It is à 3GS tel iOS 4.2.1

    My tel Goes after 10 minutes offline, apears à enige Apple, and i have to unlock again. People are not able to call me while THE Apple apears. Question what can be THE solution ?? It is à 3GS tel iOS 4.2.1

    Hi Richard,
    You mentioned that 'Apple put the AirPrint spec out there for all printer makers'. I've been looking around but I haven't found any spec. Where did you find it?
    Do printer makers have to buy a license in order to be able to advertise that they've implemented the AirPrint protocol? Is there maybe an Apple review process in place?
    TIA
    Geert

Maybe you are looking for