After a system recovery, my ipod nano is not recongnized by my computer or ITunes...

the ipod is fine and is recognized on another computer and is charged.... just doesn't show up as a portable device in my computer or ITunes  after a system recovery i did.  help

See Here for Device not recognised
http://support.apple.com/kb/TS1538
http://www.apple.com/support/ipod/

Similar Messages

  • Ipod Nano does not appear in "My Computer" and "Itunes"

    I was charging my Ipod Nano. I erased all the songs from the nano to create a new playlist. The Ipod froze in the "Do not disconnect" phase. It was disconnected a few hours later (not intentionally). Now it has disappeared from Itunes and the computer does not recognize it. The Ipod screen still says "Do not Disconnect". I have tried to reconnect the device many times. I have tried to "toggle the hold button" and even shut the computer down and restarted it to see if it would recognize the ipod. No luck. I cannot turn the ipod on and the screen is still dark and the "Do Not Disconnect" seems to be perminant. HELP!

    See if any of these articles help.
    Windows XP cannot detect an iPod.
    USB drivers are not installed properly or are out of date.
    iTunes 7 doesn't recognize the iPod.
    Your Windows PC doesn't recognize iPod

  • 3rd gen iPod Nano will not sync with latest version of iTunes. It passes the connectivity test but not the sync test under diagnostics.  Worked fine on old Windows 7 laptop but not new one.  From Control Panel it shows up as an Apple iPod USB Device...

    3rd gen iPod Nano will not sync with latest version of iTunes on new laptop. It passes the connectivity test but not the sync test under diagnostics.  Worked fine on old Windows 7 laptop but not new one.  From Control Panel it shows up as an Apple iPod USB Device...

    Never mind, I think. I think I figured it out. There was 1 song (out of > 900!) that somehow had been purchased with the other ID - I have no idea how. Once I deleted that song, it stopped asking.
    There may be something with the newest iTunes version too. I didn't think in older versions that the "On this iPod" list of songs was greyed out. But at least it syncs ok.

  • Ipod touch does not appear in my computer or itunes

    my ipod touch does not appear in "my computer" or"itunes"
    i have reset the ipod
    switched it on and off and also the PC

    when you connect the ipod what does it do? does it charge? does the cable have connectivity?
    try a different USB port first. also, how did you reset the ipod? can you describe?

  • HT1369 my ipod nano will not download songs from my library. itunes will not load on my desktop computer and I cannot get it to work?

    I cannot get itunes to download to my desktop and will not download music from my library. 

    rubicon53 wrote:
    I just bought a new laptop and my ipod nano will not stay connected to my computer.
    I cannot transfer any of my songs to my new laptop
    How to use your iPod to move your music to a new computer

  • HT1329 Trying to transfer playlist from iPod nano (gen4) to a new windows computer with iTunes.

    We are trying to connect a iPod Nano (gen4) to a new Win7 computer.  The iPod doesn't show up on iTunes and the message says that it can't be synched to a another computer.  There are more playlist on the iPod that are not on the computer.  How do I connect this iPod to the new Win7 box and transfer the playlist to iTunes.

    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • My iPod classic is not recognized by my computer or iTunes

    My iPod is not recognized by my computer or iTunes. It worked fine a few months ago but now it doesn't even sync. I tried everything from turning it on/off, reinstalling iTunes, checking the connectivity issues and etc. After going through the connectivity test the only thing I found odd was that it said that the iPod classic running firmware 1.1.2 is not connected. Could that be the issue? And if so, how can I get that firmware running again?

    I have the same issue with my ipod classic, and have gone through these steps. However, when i come to the step where it says to reinstall: "
    Next, open the new version of iTunes and connect your iPod to your computer.
    Select your iPod in the source list and click "Check for Update" under the Summary tab.   iTunes will check to see if your iPod needs to be updated and perform the update for you. "
    there is no ipod listed in the source list to check for any updates under the summary tab. Itunes just DOES NOT see the ipod at all. And this is where I am stuck....further instructions PLEASE!!! Thank you....

  • Solved: New iPod nano 8g not seen in My Computer/iTunes after Apple Support

    I received this iPod as a Christmas gift and it has taken months to get it working but I am happy to say I finally did. I wanted to post what I did to solve the problem in case anyone else is having the same issue.
    Background Information:
    - Windows XP operating system (I had to upgrade to SP 2 just for this iPod)
    - Computer works fine with an older iPod nano
    - New iPod nano would simply bring up the "Install Hardware Wizard" and always resulted in "Cannot Install Hardware"
    - Nothing would show up in My Computer
    - iPod would say "Connected, Eject before disconnecting" when it was connected
    - Under "Services" iPod service was running & Started
    - Under "Device Manager" iPod showed up under "Other Devices" with an exclamation/question mark for "iPod" (note: this did not show up under USB controllers)
    What I Have Tried That Didn't Work:
    - Downloading new iTunes. I did this a few times and ended up with 7.6.1.9
    - Uninstall and reinstall iTunes and Quicktime
    - Tried Install Hardware Wizard option to search for drivers in c:\WINNT\inf (or c:\windows\inf if that's what you have)
    - Restarted computer several times and tried creating a new user in Windows XP
    - Tried going to "Right-click-My Computer"-"Manage"-"Device Manager" and uninstalled any instance of iPod (under "Other Devices") and tried refreshing / re-installing
    - Tried stopping and restarting the iPod service in "Services"
    - Tried restarting iPod, resetting it, all those 5 R's and other Apple support docs online
    - Tried finding answers in forums
    - Finally today I spent a few hours on the phone with Apple Support, and after repeating everything in their self-help documents online, and it still didn't work, they said "Call Microsoft and tell them you have a driver issue" and that my new iPod needed some additional driver (which is why old iPod works but not new)
    So that's where I left off this afternoon. I think I've seen people who haven't had much luck getting Microsoft support to help with iPod issues, so I continued searching online. I tried updating my Video driver from the Gateway.com website and that didn't work.
    On the microsoft.com website, the best I could find was a registry change which told me to delete registry keys for UpperFilters and LowerFilters, which I didn't even have so I couldn't try.
    Finally, here is the solution to what worked:
    I searched for iPod - specific drivers, and on some random help forum - http://www.computing.net/hardware/wwwboard/forum/43267.html
    You'll see they mention "usbstor.inf" which needs to be in c:\winnt\inf (or c:\windows\inf). I checked my computer and it was missing. Luckily, it was there on my work laptop which was also recently upgraded to Windows XP so I e-mailed it to myself (glad I didn't have to trust some one online).
    I also followed his directions to add "usbstor.sys" from c:\winnt\servicepack files\i386\ to c:\winnt\system32\drivers.
    Lastly, I saw some other usb*.inf and usb*.pnf files on my laptop so I decided what-the-heck, I'll grab them all since I only had usbvideo.inf, and thus I extracted the following into my c:\winnt\inf directory: usb.inf, usb.pnf, usbport.inf, usbport.pnf, usbprint.pnf, usbprint.inf, usbstor.pnf, usbtor.inf.
    I restarted my computer and right away my iPod magically appeared in MyComputer and when I opened iTunes, it was also successfully there. Funny thing is, Windows Install Hardware Wizard popped up and I pointed it to that directory -- guess what, it didn't work. Apparently that doesn't matter. Every time I plug in my iPod now, I will just skip the "Install New Hardware Wizard" and go straight to iTunes.
    I know this was lengthy but I thought I could save some one else hours of checking around--- just go look in your "inf" directory and make sure you have the usbstor.inf file!
    Good luck!!!!

    Take a look at this link, http://support.apple.com/kb/TS1410

  • Ipod nano charges but isnt found on computer or itunes

    i recently purchased a ipod nano second generation (product)RED and it worked great but now (two months later) the center button dosent always work and when i plug it in to a windows compaq presario laptop it charges but isnt even on the computer or itunes .
    i tried using different cords and even on a different computer please help me :[
    compaq presario   Windows XP   laptop

    i recently purchased a ipod nano second generation
    (product)RED and it worked great but now (two months
    later) the center button dosent always work and when
    i plug it in to a windows compaq presario laptop it
    charges but isnt even on the computer or itunes .
    i tried using different cords and even on a different
    computer please help me :[
    compaq presario   Windows XP
      laptop
    i got it t work i reseted it while it was plUGED IN OK thx n e waY

  • My ipod nano does not appear on my computer no matter what i do

    Iv tried for 6 months to get my computer to recognize my ipod nano.iv downloaded itunes 7.3, my ipod is fully charged, all my usb ports are updated and in device manager its as if nothing has been plugged in. Iv tried putting my ipod in disc mode and when i plug it into the computer it does nothing and still reads: ok to disconnect.nothing seems to work! I plug it in to my computer and nothing!!! Iv contacted apple and have even taken to ipd into the store but they were no help. my friend had experienced the same thing and said she tried for a year until one day her computer just decided to read her ipod. can somebody help me.........

    the same exact thing happens to me except that when i plug it in it tells me not to disconnect it. i had a friend who told me to leave it plugged in no matter how long it took.. i waited for 5 hours or more for my ipod to do something and i got so mad i just disconnected it.it didn't do ANYTHING AT ALL. so, if someday you find out how to make yours work.. can you tell me please? i'm desperate!
      Windows XP  

  • Ipod nano 6th generation wont connect to computer or itunes, but still charges

    I have an Ipod nano 6 that will not connect to my computer. It still charges however. I tried a new cord. I uninstalled and reinstalled itunes. I reset my computer and the ipod. I looked to see if it was a problem with my usb drivers and the ipod did not show up. I have basically tried everything but restoring it. Any help is greatly appreciated

    Hey JHost13!
    I have an article for you that will help you troubleshoot this issue with your iPod nano:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • New ipod nano 4gen doesn't connect to computer, or itunes!!!

    i just got a new ipod and when i connected it my computer said new software connected, and had "install" or "install later". i clicked install and it said software for download could not be found.
    i thought because it wasn't fully charged yet, so i let it charge.
    i disconnected it and tried again, the same thing happened.
    i then went to "my computer" and it didn't show up there either. then i went to itunes and there it didn't say anything.
    my sister has the older ipod nano and i used the same cord and it connected. so its not the cord, or itunes because hers shows up.
    i then went to my aunts house and tried to install it there. it actually did show up on her computer, but it didn't fully register because her itunes won't connect to her internet access.
    I HAVE NO CLUE WHAT TO DO NOW! PLEASE HELP ME!

    Same problem. Mine just flashes the Apple logo when connected. I've tried all the suggested methods that you have aswell. NO warranty, what now? Any luck with you?

  • My ipod nano will not eject from the computer and it says that it is connected even tho i have hit the eject button on itunes. What do i do????

    I have tried to disconnect my ipod nano from the computer and it continues to say that it is connected. I am afriad to unplug it because I did that a few minutes ago to try and fix it and I had to reset it. It was completely synced when i hit the eject button. PLEASE HELP!!!!!!!!!!!

    Right click on the iPod Nano icon.  "Eject" should pop up.  At least that is the way it works on Macs. 
    Just found this: 
    iPod: How to Safely Disconnect if iPod doesn't eject

  • TS1538 My ipod touch still not recognized by my computer or itunes

    I just bought a brand new Ipod Touch. I plugged it in to my computer and my computer will not recognize it but other things are recognized by the device manager. I installed and reinstalled the newest version of Itunes and it isn't recognized by my computer or Itunes. I checked the USB cables, restarted the computer, restarted the Ipod and did everything in the article iOS: Device not recognized in iTunes for Windows and it still can't be recognized!! What should I do now?!

    Did you also check your security software settings?
    iTunes for Windows: Troubleshooting security software issues
    Did you try to connect in recovery mode?
    iOS: Recovery mode

  • My iPod touch is not recognised by the computer or iTunes

    I have recently whiped my laptop and did a clean install of Windows 7. Now the iPod and the computer both beep when I connectn it to the computer BUT it does not appear as a drive i  the computer, it is not recognised in iTunes and it does not show to be that it is charging.
    I have uninstalled iTunes and all the associsted softwar (in the order designated) and reinstalled iTunes, powered down and restarted both deviceses, and stopped and restarted the Apple Mibile Device software. I even tried to "restore" the iPod and did the whipe on it (bad choise) now it displays the cord and plug and is asking to be connected to iTunes. but the laptop and iPod are not talking past the initial beeps.
    Not sure where to go from here.

    Did you try everything here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

Maybe you are looking for

  • WWC-43273 Error

    Hi! While trying to register a new provider (following the steps in Section 6.3 of the OAS Portal Developer's Guide 10gR2 (10.1.4) I got the following error: WWC-43273: An error occurred during the call to the WSRP Provider: %1. Cause: A problem occu

  • Has anyone encountered error -50 during iOS5 update on iPhone 4?

    I was in the process of upgrading to ios5 and when I tried to complete to complete the process, it wouldn't allow ,e to continent, displaying error -50. Has anyone experienced this? What did you do?

  • BDC vs XI :Recommendations required

    Hi All, We have the following task. I am providing 2 solution approach for the task. Do let me know which one is is the best and Efficient and your recommendations. <b>Systems involved :</b> SAP ; 3rd party file based systems. (Applciations that acce

  • JRE GIF Images Buffer Overflow Vulnerability

    Hello All, There is an exploit in the wild for a vulnerability covered here: http://www.securityfocus.com/bid/22085/exploit It is on the following site: (Caution! Visiting any page on this site will cause the exploit to be executed, and I'm not convi

  • How Do I Keep Cover Page Blank?

    I'm running an old version (4.0.3) of Iphoto. I am trying to make a simple book - but do NOT want a picture or text on the cover. I can't seem to get this done. Any suggestions? IBook G4   Mac OS X (10.4.8)