After a while, cannot connect to WRT320N through 192.168.1.1

I have a WRT320N with latest firmware 1.0.03.
Everything works OK other than the fact that after a while (hours / days) I cannot connect to the router through http://192.168.1.1 but I have connection to the internet though. If I restart the router, I cannot connect to it but after a while I can't do it again. When I try, browser stays for minutes and eventually gives me the "Page not found error". This is happening from any computer (I have 4 computers wired and 2 wireless). The wired computers are connected through a GbLan switch and they have different OS: Vista(x64), XP(x86), Windows Server 2003 (x86) and Windows Server 2008 (x64). The 2 computers wireless connected are Windows 7 (x86) and Windows 2000. From all of them I have the same problem and after restarting the router I can connect again from any.
This behavior had been in place from the beginning but not being under pressure because I rarely have to change something in router's settings, I did not report it in time and now it seems is out of warranty.
My question is if this is something that happened to others (but I was not able to find any similar reports) or is it something wrong with my router? As I said before, other than that, router is functioning without any issues.
Thank-you

Is someone using bittorrent or any p2p software? p2p software, downloading using torrent opens a lot of TCP port, hogging the router's resources. Thus, accessing the router's gui is sluggish or not even opening up.
Upgrade the router's firmware.

Similar Messages

I have no trouble viewing apps in the iTunes Store on my iPad. However, every time I try to install a new app, I get an error message after a while - cannot connect to iTunes Store. This issues cropped up two days ago on my new iPad. Please help...

I have no trouble viewing apps in the iTunes Store on my iPad. However, every time I try to install a new app, I get an error message after a while - cannot connect to iTunes Store. This issues cropped up two days ago on my new iPad. Please help...

JUst experienced the exact same problem after changing password.Getting same message. Hope someone has an answer for this.

Cannot connect to VPN through NetworkManager anymore.

I cannot connect to VPN through networkmanager anymore. Last time used it, it worked perfectly but I don't use it so often and last time was 2-3 months ago. So I don't know what went wrong, or which package upgrade broke it.
I switched to systemd a month ago, it may or may not be related.
I can still connect from the commandline using the vpn/vpn-disconnect tools.
All that happens is an alert windows saying: "The VPN connection '......' failed because there were no valid VPN secrets." And here is the journal:
NetworkManager[355]: <info> Starting VPN service 'vpnc'...
NetworkManager[356]: <info> VPN service 'vpnc' started (org.freedesktop.NetworkManager.vpnc), PID 9214
kernel: tun: Universal TUN/TAP device driver, 1.6
kernel: tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
NetworkManager[356]: <info> VPN service 'vpnc' appeared; activating connections
NetworkManager[356]: <error> [1349687970.426748] [nm-vpn-connection.c:1405] get_secrets_cb(): Failed to request VPN secrets #3: (6) No agents were available for this request.
NetworkManager[356]: <info> Policy set 'MYSSIDOMITTED' (wifi0) as default for IPv4 routing and DNS.
NetworkManager[356]: <error> [1349687973.943758] [nm-vpn-connection.c:1405] get_secrets_cb(): Failed to request VPN secrets #3: (6) No agents were available for this request.
NetworkManager[356]: <info> Policy set 'MYSSIDOMITTED' (wifi0) as default for IPv4 routing and DNS.
NetworkManager[356]: <info> VPN service 'vpnc' disappeared
All neccessary vpn packages for networkmanager are installed.
Google did not turn up any useful info other than a few year old threads saying "upgrade your networkmanager".

Well, I managed to get the auth dialog to show up reliably by applying a couple patches from this Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=679212
Still getting breakage in that it's not properly authenticating:
Attempting to connect to redacted:443
Using client certificate '/CN=redacted'
Client certificate expires soon at: Dec 5 02:57:05 2012 GMT
SSL negotiation with somesite.somedomain.com
Connected to HTTPS on somesite.somedomain.com
GET https://somesite.somedomain.com/
Got HTTP response: HTTP/1.0 302 Object Moved
SSL negotiation with somesite.somedomain.com
Connected to HTTPS on somesite.somedomain.com
GET https://somesite.somedomain.com/+webvpn+/index.html
GET https://somesite.somedomain.com/CACHE/sdesktop/install/binaries/sfinst
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Failed to read from SSL socket
Error fetching HTTPS response
This behavior is not what I'm getting from the command-line client, of course, so... still digging.

My ipad frequently says "I am not connected to internet" although it is and there is a good signal. after a while it connects regularly. what could be the problem?

my ipad frequently says "I am not connected to internet" although it is and there is a good signal. after a while it connects regularly. what could be the problem?

You can try these things and see if it helps.
Tap Settings, then tap Safari on the left side. Then on the right side - tap clear history, clear cookies, clear cache. Clear all three. Reboot your iPad. Hold down on the sleep button at the top until the red slider appears and slide to power off. Then hold down on the sleep button until the Apple logo appears and the iPad will restart. Launch Safari and see if helped.
If that doesn't help, try this. Tap Settings, then tap General on the left side, then scroll down on the right side and tap Reset, then tap Reset Network Settings at the top. Reboot your iPad as described above. Launch Safari and log on to the Internet. You may have to enter your network password again when you reset Network Settings.
Renew the Lease in WiFi by going to Settings>WiFi>Network Name>Renew Lease. Reboot your iPad and try Safari again.

?E: Cannot connect to Loggerd on 192.169.x.x on CHM 12.1.0.1.0

C:\crf\bin>crfgui.bat -m 192.169.x.x
Cluster Health Analyzer V1.10
        Look for Loggerd via node 192.169.x.x
?E: Cannot connect to Loggerd on 192.169.x.x
    Reason: Invalid node name
Note: Node localnode is now up
?E: Cannot connect to Loggerd on 192.169.x.x
    Reason: Invalid node name
...Polling for connection to Loggerd on 192.169.x.x, duration: 60sec
Terminating on signal SIGINT(2)
Terminate batch job (Y/N)? Y
Cluster version is 12.1.0.1.0

Outside of my domain of expertise (you might try asking in a more appropriate space), but I do see a couple of bugs when searching MOS on
"Reason: Invalid node name" (Including the quotes) on all sources. Perhaps you need to use your hosts file.

Can't access three routers through 192.168.1.1, Not address of router. HELP?

Long story here, and I am baffled...
My parents were initially connected to a broadband connection through a wired BEFSX41 router. After moving the computers to another room had major connectivity issues. Tried to access router through 192.168.1.1 and could not. Ran ipconfig and found address to be 76.180.104.1. Tried reset, power cycles, release and renew, could not get it to go back to 192.168.1.1. Brought a WRT54G I had over, had normal results for a brief period(10 seconds tops) then again, same ip address and connectivity issues. After this I brought both routers home, connected them to my laptop, but not my network, inspected the configurations and updated firmware, with no issues. So to narrow down issues I brought the WRT54G to my sisters house. She runs a WRT160N. Before changing anything I accessed 160N through webpage, checked settings and verified ip through ipconfig to be 192.168.1.1. All ok. Replaced her 160N with 54G and had wrong ip address again, also 76.180.104.1, so I decided router was somehow damaged/corrupted. This is where this story turns really crappy for me. When I reconnected the 160N, the ip address was 192.168.1.1 for 15 seconds, then in ipconfig two ip addresses were shown suddenly. They were 76.180.96.1 and 192.168.1.1. Ran ipconfig again and got only 76.180.96.1, and now I can no longer access router.
My sister talked to a knowledgeable guy she knows before I hooked it to her computer and he surmised a Google redirect virus which I did sign on to. But now it seems the 54G router has transferred this virus/issue to my sisters computer, which then uploaded it to her 160N. Judging by the time delay when initially connecting 54G, I think maybe this virus is somehow corrupting routers? Does this sound possible to anyone? And if so, what are my options to save the routers, and not have to re-image computer drives? Anyone with any knowledge, please help, cause the idea of having to re-image three computers is killing me. Also I did not leave any of the routers with the original password. Thank you in advance for your help.

Good. The symptoms you saw (computer gets public IP address) is most commonly because you connect one of the LAN ports of the router to your modem. That way the computer can talk directly to the modem and gets a public IP address.
Sometimes this can happen if the router crashes and won't boot up (often power light is blinking). In that case, the switch in the router won't separate the internet port from the LAN port again giving computers direct access to the modem.

There was a problem connecting to the server "192.168.1.3

'There was a problem connecting to the server 192.168.1.3 Check the server name or IP address, and then try again. If you continue to have problems, contact your system administrator.' - How to sort this out so I can connect to my NAS Drive via wifi?
I am running OS X Yosemite all though I had this problem also with the prevues OS.. I can't seem to connect to my NAS Drive any more via wifi at home. I keep on getting this message error. I have tried different things like trashing some of the Library Preferences suggested on other discussions and updated everything I can. I have also re started Finder (as previously that sometime worked) but this no longer a solution.
The server is working fine I can connect to it via remote website. I also I can see the server/drive and even wake it up but that is as far as it goes, soon after it is 'connected/woken up' I get this error messgae and I can't see any of the files etc. Please help, this is extremely annoying, I feel helpless, this is beyond my technical know how..

I have same problem. It started after i replaced my router (which was on 192.168.1.1) to new air port time capsule, which has different IP address. When i start chrome i have to wait half a minute to get this message. Then i click ok and after that everything is working. Until next time you restart the browser. What is happening here?

Problem with my linksys WRT120N i can't connect to the address 192.168.1.1

Hello friends
i need help cuz i can't connect to the address 192.168.1.1
i didn't change the address 192.168.1.1 to an other address but i can't connect to this last i want to change my options
i really need help plz

Make sure that the computer is connected to the router on the Ethernet port..Now,check the ip address on the computer....Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1 (assuming your router is 192.168.1.1)...
If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter...If it gives you request timed out then disable any firewalls, security softwares on the computer...
If you get 4 replies then,Adjust the Browser Settings on the computer....Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on O.k...Close the IE and re-open it...

Hello iupgrade my ipad to ios7 after it upgraded cannot connect to wifi i do all things that i read on apple support

hello iupgrade ipad to ios7 after the upgration not conect to wifi and shows the message connot able to connect i do every things that i read on apple forum but at this moment cannot connect to wifi my wifi modem is tp link

You are in Recovery Mode. Follow the instructions below to recover your iPad.
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

After OS4 upgrade cannot connect to iTunes Store???

Hey guys,
I upgraded my 3GS software to OS4 and since then I am unable to connect to the itunes store from my phone. I can connect to the internet using Safari and i can access the store when I connect my phone to my laptop. But when i try to connect to itunes store just from my phone through wireless, it just says "Cannot connect to itunes store".
My internet connection/Wifi is super, there are no problems there.
Pls help me out with this glitch. Its annoying!
Thanks a ton!

I think this might have something to do with using 2 iPhones on 1 computer. My boyfriend and I each bought an iPhone 4 yesterday - mine works fine (I was the first to connect to iTunes). My boyfriend connected his to iTunes after me, then when he disconnected from the computer and tried to access the iTunes store through wifi it came up with the "cannot connect to iTunes store" message on his iPhone.
I created a new user on our laptop and downloaded iTunes again. I connected my boyfriend's iPhone and restored to factory settings and this seemed to do the trick!!!! Hope this helps!

Cannot Connect to Domain Through Wireless Connection

Hello TechNet Gurus,
As the title suggests, I am having issues connecting to my domain through a wireless connection. I am running Windows Server 2008 R2 (Data Center and Enterprise) to build my understanding of server administration to supplement my undergraduate
coursework (B.S. Computer Engineering & Cyber Security minor). So far I have a working domain controller attached to a switch that I re-purposed from an old WRT54G Linksys router. In turn, the switch is attached to a WRT54GS Linksys router.
When connected through physical media, the domain controller works as expected. I can connect to the domain from two personal laptops running Windows 7 Professional and from two virtual environments running Windows 7 Enterprise. Through these connections, I
can divvy out group policy, access network drives, and other services successfully. However, I attempted to connect wireless, and when I do, I continually get an error indicating that my username/password is incorrect. I carefully re-input the login information
(over-and-over), and I even recreated the user/computer objects. All to no avail.
After a couple of days of research between classes, homework, and work, I found some promising tips:
Added the following entry to the registry for the local machine: %comspec% /c netsh wlan connect name="JBnetwork"
Added the following local group policy (using gpedit.msc): Computer Configuration\Policies\Administrative templates\System\Logon\Always wait for the network at computer startup and logon
Unfortunately, the above tips have not resolved the issue. From what I understand, the issue stems from the order that the wireless software and domain authenticate. I have also read that this may purely be a networking issue that is not directly related
to Active Directory or Windows 7 configurations. Whatever the situation is, this has me completely stumped and I could use some expert advice.
This is my ipconfig, for the reference:
Connection-specific DNS Suffix . : jbnetwork.local
Description . . . . . . . . . . . : Broadcom 802.11n Network Adapter
Physical Address. . . . . . . . . : 88-9F-FA-88-FA-44
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::18d8:7f74:26a0:c429%10(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.14(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Tuesday, August 05, 2014 10:08:35 PM
Lease Expires . . . . . . . . . . : Wednesday, August 06, 2014 10:08:34 PM
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.3
DHCPv6 IAID . . . . . . . . . . . : 294166522
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-1E-03-7F-88-9F-FA-88-FA-44
Thanks to anyone who can help!

@Zanderol24,
Thanks for following up with me. I completely forgot about this post because I was able to figure out a solution by poking around in Group Policy.
The issue was a pretty simple fix. I tweaked the wireless policy a bit: Computer Configuration > Policies > Windows Settings > Security Settings > Wireless Network (IEEE 802.11) Policies.
Thanks again!

Sys User cannot connect to DataBase10g through ODBC

Hi guys ,
am making ODBC connection of Oracle 10g2 with sys user from xp administrative tools(Data sources ODBC) but it's giving me error.
ORA-01017:invalid username/password ;login denied.
with the same user /password i connect many times at sql* plus.
Please guide me why its all happening.
Note=ODBC connection with other user HR/Scott have no problem.

Using sql can very well mislead. See below,
E:\Documents and Settings\aristadba>sqlplus / as sysdba
SQL*Plus: Release 11.1.0.6.0 - Production on Wed Jan 13 10:22:00 2010
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> sqlplus shakeel/khan as sysdba
SP2-0734: unknown command beginning "sqlplus sh..." - rest of line ignored.
SQL> connect shakeel/khan as sysdba
Connected.
SQL> connect tom/kyte as sysdba
Connected.
SQL> conn aman/sharma as sysdba
Connected.
SQL>So would suggest that change the password while being connected as Sys from sqlplus (easiest way) or through recreating the password file and retry the connection.
HTH
Aman....

HT1414 After backp & restoration cannot connect to new carrier

I purchased locked iPhone 3GS in USA and brought it to India where I had to Jailbreak to use it on different carrier. Due to often software crash I went for restoration and backup thro' iTunes from my Windows PC. Itunes has done its job but at the end iPhone cannot connect to the carrier. The message is Please insert SIM card into your phone though the SIM card is inserted. I do not have original AT&T SIM card. Please suggest solution.

Discussion of jailbroken devices is not permitted here per the terms of use.
Goodbye.

CANNOT CONNECT TO WIFI THROUGH IPOD TOUCH 4G..ROUTER REQUIRES USERNAME AND PASSWORD..HELP NEEDED

i have a ipod touch 4g...and my router requires WEP key and a username and a password when i connect to it through my laptop..ipod touch only asks for a password i.e. the WEP key..question is how to enter the username and the password in ipod touch?

my service provider has provided me with a username and a password..therefore my router is "NOT ALWAYS CONNECTED TO THE INTERNET"..also PPPoE is enabled...
i think i ll have to call the ISP and tell him to remove the username and password...because i dont think that ipod has a provision for entering passwords other than the WEP key..

Cannot connect to VPN through Time Capsule.

I have setup a VPN but my buddy cannot connect to it unless he bypasses his Time Capsule (2011 model) and connects his Mac directly to his cable modem.
The Time Capsule is setup with DHCP to lease out a different IP range than my VPN.
We have looked over all of the Time Capsule settings and cannot seem to find anything wrong.
My brother has a similar setup except using just a nornal Air Port Extreme and has no problems connecting to my VPN.
Any suggestions would be appreciated.
Thanks.
-Jeff-

Port forward using the v5 utility.. I have strong suspicions about the v6 for port forwarding.
It does depend on what particular VPN you are talking about.
Check what ports are required.
You can load v5 utility even into Mountain Lion .. as well as later Lion versions thus and so.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
Leave the package open on the desktop so you can see the file. AirportUtility56.pkg
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. If your Mac refuses to run the software, because it wasn’t downloaded from the Apple store, go to security in preferences and allow other software to work.. this is limitation of trade methinks. You can set back later if you like.
Now drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. in finder, open the new directory, drill down.. applications, utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall version 6 (now 6.3 if you updated) so don't try.. and you cannot or should not run them both at the same time.. although I have had no problems when doing so.

After a while, cannot connect to WRT320N through 192.168.1.1

Similar Messages

Maybe you are looking for