After activation of atandard business content key figure is not visible
Hi all,
I am trying to implement inventory management scnerio in BW3.5 using screen shot PDF , for this i activate standard business content ( cube : 0IC_c03 ) and activate all its related object . one of my key figure 0RECVS_VAL I want to change its parameter for this when I search this infoobject in Infoobject tree this is not visible
while its present in cube 0IC_c03 ,can anybody tell me for changing in this key figure what can i do???
Thanks and regards
Ankit modi
Hi
Again it install from BI content and do the changes what ever u want by RSD1
Cheers
Edited by: SDN USER on Jun 26, 2008 12:04 PM
Similar Messages
-
BI COntent: Key figure *** is not available in version D
Hello,
I am trying to activate 0PUR_C02 in BI content by Before and After Installation ,i got errors-infoobject is not available in Version 'D' 'or Version 'A', I checked in RSD1 InfoObject is in Active version , and i unistalled by selecting "Do Not Install any Below" still am facing same error...
wat is the sol for it....Hi Vinay,
The BI content objects are delivered in version D. They have to installed(Activated) before they can be used.
In your case the BI content object "0ADDATEFROM" seems not be in inactive state. So search for this BI content object and then activate(install) it. Later you can use it in 0BP_ID .
Reward points if you find it helpful.
Regards,
Harold. -
Error in DTP load from PSA to IC - Error - Key figure 0 not allowed for
HI ALL,
ERROR - Key figure <> 0 not allowed for unit ' '; see long text
Diagnosis
The unit/currency ' Source unit MEIN ' with the value 'space' is
assigned to the key figure ' Source Key Fig. DIFF ' with the value '
4240.000- '.
System Response
A key figure that is not equal to 0 and for which no unit/currency is
set has an inconsistent data state. The data record is not processed.
Procedure
Correct the source data.
Procedure for System Administration
Please guide
BR
PrasadHi ,
First af all identify all such records by creating an error DTP so that the same can be collected in Error stack .
1. Go to the Update tab of the normal DTP and there you can find the create Error DTP option .Click on that .
2. This will take you to the Error DTP screen .Use the option 'Valid record updated reporting possible (request green).You can increase the number of errorneous records to be avoided there only .
3. Please make sure you have activated the option of ' Valid records update reporting possible request green ' both in the Normal and Error DTP .Also the number of errorneous records to be avoided to be mentioned in both the DTP's.
4. Activate the DTP's (Both Normal and Error) .
After this can you please run the Normal DTP again .You can check the Error stack to see the errorneous records .When you double click on any record in the error stack it will thrown an error message from where you can find the exact error with those records .You can rectify these records in the errror stack and then run the error DTP to update the same to the data target.
Ideally these records should be rectified in the Source system .
Thanks
Kamal -
Appended Key figure is not working in Delta reverse record
Dear All,
I have enhanced 2LIS_11_VASCL datasource, to pull value from condition record, called Surchage.
I have set reversal indicator for this field in my datasource. I have written code in CMOD to get this value from KONV table of that sales order.
Now when value is changed, delta record for this, automatically creates reversal record, but it shows new value of surcharge as negative, because that code is pulling value which currently exists in table.
For example for order 350089 , if surchage is $ 100 . User changes it to $200
Then I get following record.
Reversal Record - $200 (This should be instead -$100 , i.e. previous value)
New Record - $100.
Because of this my new value is not getting updated in table.
I can't use overwrite mode in ODS because some other technical reason.
How can I solve this problem?
appended Key figure is not working in Delta reverse recordLIS have before-after delta. So ODS should be in Overwrite mode. If that is not possible.. try sorting the records in Start Routine such way that the - 100 $ is above the - 200 $ records in Data Package.
but this is risky as it will affect other key figures for which things maybe fine. I guess you need take Data Package records in an internal table. And then sort this internal table. then you can read the internal table in update routine of this key figure.
OR (If you are on BI 7.0) you introduce an InfoSource in between DS and DSO with Overwrite mode for this Key Figure. -
Virtual Key Figures its not populated when execute query
Hi All
I did a BADI for populate a Virtual Key Figure, I follow the instructions of link
Link:[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60e34f63-f44c-2c10-488e-c89b04e0ca7c?quicklink=index&overridelayout=true]
In addition I add the code section of data declarated on example of: CL_EXM_IM_RSR_OLAP_BADI section define: IF_EX_RSR_OLAP_BADI~DEFINE, only information that said:
DATA: l_s_chanm TYPE rrke_s_chanm,
l_kyfnm TYPE rsd_kyfnm.
FIELD-SYMBOLS:
<l_s_chanm> TYPE rrke_s_chanm.
I test the query on RSRT and the virtual Key Figure is "0.00" this look like if the virtual key figure is not populated.
I did other things like:
Set a Break Point on COMPUTE section of my BADI, I saw that the value is assigned, but I don't know how I can continue reviewing the pass of this value to result of query.
I generate again the query on RSRT.
My code is:
IF_EX_RSR_OLAP_BADI~DEFINE
method IF_EX_RSR_OLAP_BADI~DEFINE.
data: L_S_CHANM type RRKE_S_CHANM,
L_KYFNM type RSD_KYFNM.
field-symbols:
<L_S_CHANM> type RRKE_S_CHANM.
case I_S_RKB1D-INFOCUBE.
when 'ZGTO_OB2'.
append 'ZVIRTKF' to C_T_KYFNM.
endcase.
endmethod.
IF_EX_RSR_OLAP_BADI~COMPUTE
method IF_EX_RSR_OLAP_BADI~COMPUTE.
field-symbols <FS_ZVIRTKF> type any.
P_KYF_ZVIRTKF = 16.
assign component P_KYF_ZVIRTKF of structure C_S_DATA
to <FS_ZVIRTKF>.
<FS_ZVIRTKF> = 10 .
endmethod.
I will appreciate your recommendations, Thanks in advanced.
AlThank you very much Sanganya
I saw this:
I put a break point on P_KYF_ZVIRTKF = 16., then I saw that P_KYF_ZVIRTKF obtain value 16.
Then on sentence: assign component P_KYF_ZVIRTKF of structure C_S_DATA
to <FS_ZVIRTKF> , when the system pass this line, I review the sy-subrc and is equal 4, as I understood the ASSIGN sentence did not be complete, the value shoul be 0.
Then when the system try to run the sentence: <FS_ZVIRTKF> = 10 the system send an Execution error that say: GETWA_NOT_ASSIGNED...
Error analysis
You attempted to access an unassigned field symbol
(data segment 32780).
This error may occur if
- You address a typed field symbol before it has been set with
ASSIGN
- You address a field symbol that pointed to the line of an
internal table that was deleted
- You address a field symbol that was previously reset using
UNASSIGN or that pointed to a local field that no
longer exists
- You address a global function interface, although the
respective function module is not active - that is, is
not in the list of active calls. The list of active calls
can be taken from this short dump.
Exactly the line selected with error is:
>>>> <fs_zvirtkf> = '10.0'.
I will appreciate your help
Thank you
Al -
Hi APO Gurus ,
After SCM and Liive Cashe migration , when we run transaction /SAPAPO/SDP94 the following error message is appearing :
" Key figure does not exist " .
Does somebody has any Ideas ? any logical flow for resolution ?
Appreciate your help ,
YoniHi Yoni,
Check on the following
1) Check whether the planning area is initialised after migration
2) Look for any pending transports during migration
3) Check any key figures maintained with calculation type N
4) Check sap note 1352371
5) In case if the error still exists, run report
/SAPAPO/PSTRUCONS
Regards
R. Senthil Mareeswaran. -
Very Very Urgent Issue: Restricted Key Figure does not return any data
Hi all,
Please help me solving this urgent issue.
created customer exit variable on characterstics version and also
other customer exit variable on Value type.
I coded that in variable exit. Problem is when I include these in
restrickted keyfigure My query does not return me any data.
But if I remove from restrickted key firgure and put it as normal
charaterstics I see the variable is getting populated.
Also in RSRT the SQl generated when these are included in RKF is not
correct.
I debugged and know they are getting populated. As when included in RKF
I can also see the values of customer exit variables from information
tab.
I also know that there is data in cube for those restrictions.
I posted one OSS Notes regarding this urgent issue. But got no reply from SAP.
FYI: We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11
Thanks
SAP BW
**Please do not post the same question twice: Very Urgent Issue: Restricted Key Figure does not return any dataHi,
Everyone out there this is very urgent. If someone can help me solving this problem.
We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11.
I posted one oss notes also regarding this issue. But got no reply from SAP.
So, Please help me solving this issue.
Thanks
SAP BW -
Some key figure are not update for movement type 101
Dear All,
I have done load for Inventory and now i am finding that for some material the with movement type 101 the key figures are not getting populated, for these materials the values in characteristics is getting populated fine.
I have loaded the data according to stranded procedure in "How to Load...."
I have checked the values of material in R3 and it is there.
Example of the record::
Material Plant Movement type Calender Day quanity Base Unit
10101 01 350 01.02.2006 20 KG
10101 01 101 05.07.2006 KG
10101 01 101 10.07.2006 KG
The Quantity is not appearing in second and third record.Hi,
Please check whether you have set ''Rule groups'' at transfermation level . There you can set the conditions like materials having movement type X can be updated to one Key Figure and material having movement type Y can be updated to another Key figure.
Please check whether you have set this option at transfermation level.
For example, may be in your case materials from different plants are updating to different key figure.
Thanks,
Edited by: kavitha nagandla on Feb 17, 2010 7:19 AM -
After downloading iOS 6, I can't seem to shut down my phone after holding the lock and slide key. Phone not jailbroken
You mean lock and home key right? I have the same problem with my 4th gen iPod touch. Seems as though if I hold the buttons again a 2nd time, the iPod automatically restarts as it loads the apple screen that appears when you turn on the iPod/iPhone but I can't get the iPod to stay turned off.
-
Key focus is not visible for all objects when tabbing
I'm using LabView 5.1.
The key focus is not visible for all objects when tabbing through a "disabled and grayed-out" object.
For example, let's say I create a panel with 3 buttons. If I create a "disabled" attribute for button 2 and assign the value "2" (disabled and grayed-out) to it. When I will run this VI, the key navigation will go through button 1 and button 3 (skipping button 2 as expected) but the key focus on button 3 will not be visible.
Is this a bug with LabView or am I doing something wrong ?Hi Ben,
Don't worry, time is not an issue... I'm posting an example of a VI with the problem I described. I noticed that the problem occurs only with "dialog buttons".
When you have time, let me know if you see the same behavior. If you do, I will report the problem to National Instrument.
Thanks for your time !
BigBen
Attachments:
3buttons.vi 22 KB -
Hidden Key figures are not being displayed after unhiding
We've applied SP 14 - SP 22 in our 3.1C BW system. Prior to the patches going in, users were able to unhide hidden key figures through the Change Query local view and view them in the report once the query was executed. After the patches were applied, even though the key figures
were unhiden through the change query local view, they are not returned in the report after executing the
query.
As anyone run across this after appling this patch level ?Hi Rajkumar,
Actually it is a generic extractor (customized) and the ODS active data is getting the delta records correctly. After I extract from R/3 and activate the ODS, the active table has correct results, but the change log table has the problem described before. All the fields comes from one single extractor.
The 0RECORDMODE that I mentioned is about the setting in the transformation to the ODS. You have the Technical rule group where you can set the 0RECORDMODE, in my case it is set to ' ' (blank) which means it will receive After-Images from the extractor (which I think is correct in my case). The most curious is that it is working for almost all key figures (all amount type), except for the Price Unit which is Quantity type.
Any other ideas?
Thanks. -
Problem when activating Query from Business Content
Hi Gurus,
I'm currently encountering problems when activating a query (Financial Statement and P&L: Actual/Actual Comparison) in the business content under these 2 cubes (0FIGL_VC1 and 0FIGL_VC2). Since I was told that these cubes are Virtual Cubes I also have already activated Basis Cubes (0FIGL_C01 and 0FIGL_C02) as a prerequisite of the 2 Virtual Cubes. I have also loaded the data for the 2 cubes and have encountered no problem at all.
But while activating the said Query (Financial Statement and P&L: Actual/Actual Comparison). I have encountered a problem during activation and only this error message appears 1. Error when activating element DO9NE34DKNREWIBWNVAW8BS7M (Technical Name of the Query) and 2. BEx transport request '' is not available or not suitable.
What other possible steps am I missing here?Is there anything else I should do or activate before activating the Query. Thank you again for all the help.
- KitHi Kristian,
Do the following ->
Goto transaction RSA1 -> Transport Connection -> Edit -> Transport -> Switch On Standard.
After this try activating your Query again.
Hope this helps!
Regards,
Saurabh -
Error while activating cube contains non cumulative key figures
Hi all,
when i am trying to activate a cube which contains non cumulative key figure it is showing out the following error:
DDIC Object TABL /BIC/LZATTR1NON has not been activated
Table /BIC/LZATTR1NON could not be activated
Please let me know if any one come across with such error
Help are appreciatedBefore activating an infocube with non-cumulative keyfigures, the system
design forces the user to enter at least once the screen: maintain
non-cumulative values (validity table). If that step has been performed, activation will work fine.
In the meantime, please do this step explicitly, at least once, when
configuring such an infocube, then you should not have any problem.
Please follow the same process while activating the infocube
Goto Infocube ->Goto Change mode->Menu ->Extra-> goto the screen:
maintain non-cumulative values once.
Walter Oliveira. -
BB Balance - long delay after switch to/unlock business content after Upgrade to 10.2
Dear All,
we're using Z10 with BES10.1.3, everything run smoothly but we've one issue:
since we have upgraded Z10 device software from 10.1 to 10.2.0.1791 there is a delay of about 12-15 seconds each time we unlock device to business content until we see messages in BB-Hub
to explain, business content is locked - we type in password - OK
display switch to empty hub - then we have to wait 12-15sec. until messages will appear in hub
We've tried out different things, we've wiped device, we've deleted business content and regarding email account, activated device new on BES10, wait 2 days that basic syncronisation will be done and same issue.
Can you help us please, we don't know what we should try out any more...Blackberry Hub and the fast check of new incoming messages is one of the main features of Z10...thanks in advance.Thanks for your quick reply, so what should I try out with this device in detail?
Thanks -
Some key figures are not being correctly reversed in the Change Log
Hi Experts,
I'm working with the BI 7 (SP 15) and I have created an ODS with Overwrite option (Record Mode equal to ' ') and a Cube receiving data from this ODS.
Whenever I have a change in one existing record in R/3 side (already previously loaded to BW), it comes perfectly to the ODS and overwrite the record in the Active Data. However, in the change log table, the before image record is not reversing all the key figures, there is one (Quant type) which is not working and it is being doubled in the cube. All the other key figures are Amount type and are working fine. PLease see below some examples of the Change Log behavior:
First time the record comes - Change log content:
Material Valid Dt Cost Value Quantity Rec. Mode Req. ID
1234 May/01 $ 100.00 10 'N' 1
Second time when the record changes the Date:
Material Date Cost Value Quantity Rec. Mode Req. 1234 May/29 $ 100.00 10 ' ' 2
1234 May/01 $ -100.00 10 'X' 2
Then the final result in the cube, after it is compressed, is:
Material Date Cost Value Quantity
1234 May/29 $ 100.00 20
Also, I have a Counter in the transformation to the Cube which is a constant equal to 1, it is also being aggregated erroneously. I could create a routine to check the record mode coming, but I'm not sure it is the best solution.
Can anybody help me to figure this out, please?
Thanks in advance.Hi Rajkumar,
Actually it is a generic extractor (customized) and the ODS active data is getting the delta records correctly. After I extract from R/3 and activate the ODS, the active table has correct results, but the change log table has the problem described before. All the fields comes from one single extractor.
The 0RECORDMODE that I mentioned is about the setting in the transformation to the ODS. You have the Technical rule group where you can set the 0RECORDMODE, in my case it is set to ' ' (blank) which means it will receive After-Images from the extractor (which I think is correct in my case). The most curious is that it is working for almost all key figures (all amount type), except for the Price Unit which is Quantity type.
Any other ideas?
Thanks.
Maybe you are looking for
-
MacBook Pro missing video adaptor
Hi, I have a MacBook Pro (Uniboby). I need to use it on a theater show with a video projector that will be 15 meters away. The projector has S-vidéo, Dsub15 ou RCA inputs. What is the best solution knowing Apple does not have a direct to RCA adaptor.
-
I received an email with a reply address of [email protected] Here is the body of the message: "As we strive to secure your account, please be informed to upgrade to our latest security platform ***** Your privacy and protection is our concern. Apple
-
No data media can be created for the proposal run - Bacs Payment
Hi, When i schedule program RFFOGB_T for bacs payment and select proposal run only i get the following error "No data media can be created for the proposal run". But when i execute the program with out selecting the check box " Proposal run only...a
-
The Apple app store doesn't show Mac OS X Lion 10.7.3 as purchased and will resell it to me. I bought this computer (early 2011 macbook pro 17 in) new in oct 2011 it came with Lion installed has anyone else noticed this?
-
What's with the HUGE file sizes for patches
Hi gang, Every time I install a patch my Staroffice directory bloats back up. When installing for the first time, I select english only and it only installs english but when I install the patches it installs about 5 different languages which fattens