After adding 2nd WiSM and failing over AP's some apps don't work
We have a dual core made up of 2 6513's. In 6513#1 we have WiSM#1 which we have had for sometime now. We have added a 2nd WiSM in 6513#2 for redundancy purposes also we are going to be re-configuring the WiSM in 6513#1 to more match that of the new WiSM in 6513#2. We have installed the new WiSM and failed over the AP's from 6513#1 so we can re-configure it's WiSM. The failover went great and no issues, with the exception that a web application or two didn't function from wireless clients and users were having issues getting to some mapped drives. The only difference from the new WiSM config vs the old WiSM is that on the old WiSM the AP's were in the same VLAN as the controller management interfaces. Now with the new WiSM it's configuration has the controllers AP mgt interfaces ip addresses in a different VLAN from the AP's, we are doing this based on Cisco best practices. If we revert the AP's back to the original WiSM/controllers the PC's where they are on the same vlan/subnet the applications and shares that were having issues the other way work. We have placed a call with Cisco TAC and they say our configs look good and we even sent them some packet captures and they said everything looks normal. The wireless clients can ping and resolve the server hosting the application database just fine.
Thanks
We did create the mobility groups, and we are using DHCP opt 43. The AP's find the 2nd WiSM#2 just fine and associate to the controllers and all the WLAN's work just fine. The only issue is that after the AP's are on the new WiSM and controllers there is an application or 2 that is having trouble locating it's database server and that some share's are not working. Again the only difference in this new setup in that now the AP's are on a different subnet/vlan from the controller mgt addresses where as before they were in the same subnet/vlan and the application and shares worked fine. It's almost like it is a bit of a routing issue?
Thanks
Similar Messages
-
After installing "Java for OS X 2013-004" update, Java apps don't work anymore as expected
After installing "Java for OS X 2013-004" update, Java apps don't work anymore as expected.
Windows of Swing apps don't display all GUI elements.
After replacing System/Library/Java from a Time MAchine Backup, everything works normal again.
Is this update corrupted?"avoid using Java in a web browser at all,..."
Good advice.
"...old Java apps/applets that aren't written to modern specs ..."
The stand-alone Java Swing applications, that don't display their GUI elements after installing this update, have been written according to modern standards. With Oracle Java7, and with Java6 from Apple prior to this update, they run absolutely flawlessly.
This is absolutely Apple's fault. -
After upgrade to os 4 some apps don't work including Apple Store
Upgrade went ok, but took long time. Some apps don't work correctly or crash. e.g. Apple Store app just recycles back to main screen. Starbucks app works for a few seconds then crashes.
I had same problems.
I decided to "downgrade" back to OS3. You can too!
Go to this thread and read about it. http://discussions.apple.com/thread.jspa?threadID=2473976&tstart=0 -
Help , I don't know how to update my iOS on the iPad one some apps won't work with the one I have and are suggesting that I update . Can someone help me figure this out.
See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
Device iOS Verson
iPhone 1 iOS 3.1.3
iPhone 3G iOS 4.2.1
iPhone 3GS iOS 6.1.x
iPhone 4 iOS 7.0.x
iPhone 4S iOS 7.0.x
iPhone 5 iOS 7.0.x
iPhone 5c iOS 7.0.x
iPhone 5s iOS 7.0.x
iPod Touch 1 iOS 3.1.3
iPod Touch 2 iOS 4.2.1
iPod Touch 3 iOS 5.1.1
iPod Touch 4 iOS 6.1.x
iPod Touch 5 iOS 7.0.x
iPad 1 iOS 5.1.1
iPad 2 iOS 7.0.x
iPad 3 iOS 7.0.x
iPad 4 iOS 7.0.x
iPad Mini iOS 7.0.x
iPad Air iOS 7.0.x
=====================================
Select the method most appropriate for your situation.
Upgrading iOS
1. How to update your iPhone, iPad, or iPod Touch
2. iPhone Support
3. iPod Touch Support
4. iPad Support
a. Updating Your iOS from iOS 5
Tap Settings > General > Software Update
If an update is available there will be an active Update button. If you are current,
then you will see a gray screen with a message saying your are up to date.
b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
c. Resolving update problems
1. iOS - Unable to update or restore
2. iOS- Resolving update and restore alert messages -
Some Apps don't work after an upgrade IOS to 6.1.1
Description of the problem with my iPhone 4 after an upgrade from iOS 5.1 to 6.1.1:
Some Apps try to start but stopped immidiatly.
The issue for my case:
Try to find your App trough the App Store on your iPhone.
The status of this App should be open. (but when you try to open it, it won't !!!)
Use the main button to go back to your App and delete it.
Go back to Apps Store and reinstall your App.
Check the progress of the installation.
When the install is done open your App again and it should be working again.
Best regards,
SchotelTry downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.
-
WLS6.1sp1 stateful EJB problem = load-balancing and fail over
I have three problem
1. I have 2 clustered server. my weblogic-ejb-jar.xml is here
<?xml version="1.0"?>
<!DOCTYPE weblogic-ejb-jar PUBLIC '-//BEA Systems, Inc.//DTD WebLogic 6.0.0 EJB//EN'
'http://www.bea.com/servers/wls600/dtd/weblogic-ejb-jar.dtd'>
<weblogic-ejb-jar>
<weblogic-enterprise-bean>
<ejb-name>DBStatefulEJB</ejb-name>
<stateful-session-descriptor>
<stateful-session-cache>
<max-beans-in-cache>100</max-beans-in-cache>
<idle-timeout-seconds>120</idle-timeout-seconds>
</stateful-session-cache>
<stateful-session-clustering>
<home-is-clusterable>true</home-is-clusterable>
<home-load-algorithm>RoundRobin</home-load-algorithm>
<home-call-router-class-name>common.QARouter</home-call-router-class-name>
<replication-type>InMemory</replication-type>
</stateful-session-clustering>
</stateful-session-descriptor>
<jndi-name>com.daou.EJBS.solutions.DBStatefulBean</jndi-name>
</weblogic-enterprise-bean>
</weblogic-ejb-jar>
when i use "<home-call-router-class-name>common.QARouter</home-call-router-class-name>"
and deploy this ejb, exception cause
<Warning> <Dispatcher> <RuntimeException thrown b
y rmi server: 'weblogic.rmi.cluster.ReplicaAwareServerRef@9 - jvmid: '2903098842
594628659S:203.231.15.167:[5001,5001,5002,5002,5001,5002,-1]:mydomain:cluster1',
oid: '9', implementation: 'weblogic.jndi.internal.RootNamingNode@5f39bc''
java.lang.IllegalArgumentException: Failed to instantiate weblogic.rmi.cluster.B
asicReplicaHandler due to java.lang.reflect.InvocationTargetException
at weblogic.rmi.cluster.ReplicaAwareInfo.instantiate(ReplicaAwareInfo.ja
va:185)
at weblogic.rmi.cluster.ReplicaAwareInfo.getReplicaHandler(ReplicaAwareI
nfo.java:105)
at weblogic.rmi.cluster.ReplicaAwareRemoteRef.initialize(ReplicaAwareRem
oteRef.java:79)
at weblogic.rmi.cluster.ClusterableRemoteRef.initialize(ClusterableRemot
eRef.java:28)
at weblogic.rmi.cluster.ClusterableRemoteObject.initializeRef(Clusterabl
eRemoteObject.java:255)
at weblogic.rmi.cluster.ClusterableRemoteObject.onBind(ClusterableRemote
Object.java:149)
at weblogic.jndi.internal.BasicNamingNode.rebindHere(BasicNamingNode.jav
a:392)
at weblogic.jndi.internal.ServerNamingNode.rebindHere(ServerNamingNode.j
ava:142)
at weblogic.jndi.internal.BasicNamingNode.rebind(BasicNamingNode.java:36
2)
at weblogic.jndi.internal.BasicNamingNode.rebind(BasicNamingNode.java:36
9)
at weblogic.jndi.internal.BasicNamingNode.rebind(BasicNamingNode.java:36
9)
at weblogic.jndi.internal.BasicNamingNode.rebind(BasicNamingNode.java:36
9)
at weblogic.jndi.internal.BasicNamingNode.rebind(BasicNamingNode.java:36
9)
at weblogic.jndi.internal.RootNamingNode_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:296)
So do i must use it or not???
2. When i don't use "<home-call-router-class-name>common.QARouter</home-call-router-class-name>"
, there's no exception
but load balancing does not happen. According to the document , there's must load
balancing when i call home.create() method.
my client program goes here
DBStateful the_ejb1 = (DBStateful) PortableRemoteObject.narrow(home.create(),
DBStateful.class);
DBStateful the_ejb2 = (DBStateful) PortableRemoteObject.narrow(home.create(3),
DBStateful.class);
the result is like that
the_ejb1 = ClusterableRemoteRef(203.231.15.167 weblogic.rmi.cluster.PrimarySecon
daryReplicaHandler@4695a6)/397
the_ejb2 = ClusterableRemoteRef(203.231.15.167 weblogic.rmi.cluster.PrimarySecon
daryReplicaHandler@acf6e)/398
or
the_ejb1 = ClusterableRemoteRef(203.231.15.125 weblogic.rmi.cluster.PrimarySecon
daryReplicaHandler@252fdf)/380
the_ejb2 = ClusterableRemoteRef(203.231.15.125 weblogic.rmi.cluster.PrimarySecon
daryReplicaHandler@6a0252)/381
I think the result should be like under one... isn't it??
the_ejb1 = ClusterableRemoteRef(203.231.15.167 weblogic.rmi.cluster.PrimarySecon
daryReplicaHandler@4695a6)/397
the_ejb2 = ClusterableRemoteRef(203.231.15.125 weblogic.rmi.cluster.PrimarySecon
daryReplicaHandler@6a0252)/381
In this case i think the_ejb1 and the_ejb2 must have instance in different cluster
server
but they go to one server .
3. If i don't use "<home-call-router-class-name>common.QARouter</home-call-router-class-name>",
"<replication-type>InMemory</replication-type>" then load balancing happen but
there's no fail-over
So how can i get load-balancing and fail over together??
I have three problem
1. I have 2 clustered server. my weblogic-ejb-jar.xml is here
<?xml version="1.0"?>
<!DOCTYPE weblogic-ejb-jar PUBLIC '-//BEA Systems, Inc.//DTD WebLogic 6.0.0 EJB//EN'
'http://www.bea.com/servers/wls600/dtd/weblogic-ejb-jar.dtd'>
<weblogic-ejb-jar>
<weblogic-enterprise-bean>
<ejb-name>DBStatefulEJB</ejb-name>
<stateful-session-descriptor>
<stateful-session-cache>
<max-beans-in-cache>100</max-beans-in-cache>
<idle-timeout-seconds>120</idle-timeout-seconds>
</stateful-session-cache>
<stateful-session-clustering>
<home-is-clusterable>true</home-is-clusterable>
<home-load-algorithm>RoundRobin</home-load-algorithm>
<home-call-router-class-name>common.QARouter</home-call-router-class-name>
<replication-type>InMemory</replication-type>
</stateful-session-clustering>
</stateful-session-descriptor>
<jndi-name>com.daou.EJBS.solutions.DBStatefulBean</jndi-name>
</weblogic-enterprise-bean>
</weblogic-ejb-jar>
when i use "<home-call-router-class-name>common.QARouter</home-call-router-class-name>"
and deploy this ejb, exception cause
<Warning> <Dispatcher> <RuntimeException thrown b
y rmi server: 'weblogic.rmi.cluster.ReplicaAwareServerRef@9 - jvmid: '2903098842
594628659S:203.231.15.167:[5001,5001,5002,5002,5001,5002,-1]:mydomain:cluster1',
oid: '9', implementation: 'weblogic.jndi.internal.RootNamingNode@5f39bc''
java.lang.IllegalArgumentException: Failed to instantiate weblogic.rmi.cluster.B
asicReplicaHandler due to java.lang.reflect.InvocationTargetException
at weblogic.rmi.cluster.ReplicaAwareInfo.instantiate(ReplicaAwareInfo.ja
va:185)
at weblogic.rmi.cluster.ReplicaAwareInfo.getReplicaHandler(ReplicaAwareI
nfo.java:105)
at weblogic.rmi.cluster.ReplicaAwareRemoteRef.initialize(ReplicaAwareRem
oteRef.java:79)
at weblogic.rmi.cluster.ClusterableRemoteRef.initialize(ClusterableRemot
eRef.java:28)
at weblogic.rmi.cluster.ClusterableRemoteObject.initializeRef(Clusterabl
eRemoteObject.java:255)
at weblogic.rmi.cluster.ClusterableRemoteObject.onBind(ClusterableRemote
Object.java:149)
at weblogic.jndi.internal.BasicNamingNode.rebindHere(BasicNamingNode.jav
a:392)
at weblogic.jndi.internal.ServerNamingNode.rebindHere(ServerNamingNode.j
ava:142)
at weblogic.jndi.internal.BasicNamingNode.rebind(BasicNamingNode.java:36
2)
at weblogic.jndi.internal.BasicNamingNode.rebind(BasicNamingNode.java:36
9)
at weblogic.jndi.internal.BasicNamingNode.rebind(BasicNamingNode.java:36
9)
at weblogic.jndi.internal.BasicNamingNode.rebind(BasicNamingNode.java:36
9)
at weblogic.jndi.internal.BasicNamingNode.rebind(BasicNamingNode.java:36
9)
at weblogic.jndi.internal.RootNamingNode_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:296)
So do i must use it or not???
2. When i don't use "<home-call-router-class-name>common.QARouter</home-call-router-class-name>"
, there's no exception
but load balancing does not happen. According to the document , there's must load
balancing when i call home.create() method.
my client program goes here
DBStateful the_ejb1 = (DBStateful) PortableRemoteObject.narrow(home.create(),
DBStateful.class);
DBStateful the_ejb2 = (DBStateful) PortableRemoteObject.narrow(home.create(3),
DBStateful.class);
the result is like that
the_ejb1 = ClusterableRemoteRef(203.231.15.167 weblogic.rmi.cluster.PrimarySecon
daryReplicaHandler@4695a6)/397
the_ejb2 = ClusterableRemoteRef(203.231.15.167 weblogic.rmi.cluster.PrimarySecon
daryReplicaHandler@acf6e)/398
or
the_ejb1 = ClusterableRemoteRef(203.231.15.125 weblogic.rmi.cluster.PrimarySecon
daryReplicaHandler@252fdf)/380
the_ejb2 = ClusterableRemoteRef(203.231.15.125 weblogic.rmi.cluster.PrimarySecon
daryReplicaHandler@6a0252)/381
I think the result should be like under one... isn't it??
the_ejb1 = ClusterableRemoteRef(203.231.15.167 weblogic.rmi.cluster.PrimarySecon
daryReplicaHandler@4695a6)/397
the_ejb2 = ClusterableRemoteRef(203.231.15.125 weblogic.rmi.cluster.PrimarySecon
daryReplicaHandler@6a0252)/381
In this case i think the_ejb1 and the_ejb2 must have instance in different cluster
server
but they go to one server .
3. If i don't use "<home-call-router-class-name>common.QARouter</home-call-router-class-name>",
"<replication-type>InMemory</replication-type>" then load balancing happen but
there's no fail-over
So how can i get load-balancing and fail over together??
-
Load-balancing and fail-over between web containers and EJB containers
When web components and EJB components are run in different OC4J instances, can we achieve load-balancing and fail-over between web containers and EJB containers?
nullIt looks like there is clustering, but not loadbalancing available for rmi
from the rmi.xml configuration. The application will treat any ejbs on the
cluster as one-to-one look-ups. Orion will go out and get the first ejb
available on the cluster. See the docs on configuring rmi.xml (and also the
note below).
That is a kind-of failover, because if machine A goes down, and the
myotherAejbs.jar are on machine B too, orion will go out and get the bean
from machine B when it can't find machine A. But it doesn't go machine A
then machine B for each remote instance of the bean. You could also specify
the maximum number of instances of a bean, and as one machine gets "loaded",
orion would go to the next available machine...but that's not really
loadbalancing.
That is, you can set up your web-apps with ejbs, but let all of the ejbs be
remote="true" in the orion-application.xml file:
<?xml version="1.0"?>
<!DOCTYPE orion-application PUBLIC "-//Evermind//DTD J2EE Application
runtime 1.2//EN" "http://www.orionserver.com/dtds/orion-application.dtd">
<orion-application deployment-version="1.5.2">
<ejb-module remote="true" path="myotherAejbs.jar" />
<ejb-module remote="true" path="myotherBejbs.jar" />
<ejb-module remote="true" path="myotherCejbs.jar" />
<web-module id="mysite" path="mysite.war" />
... other stuff ...
</orion-application>In the rmi.xml you would define your clustering:
<cluster host="230.0.0.1" id="123" password="123abc" port="9127"
username="cluster-user" />
Tag that is defined if the application is to be clustered. Used to set up
a local multicast cluster. A username and password used for the servers to
intercommunicate also needs to be specified.
host - The multicast host/ip to transmit and receive cluster data on. The
default is 230.0.0.1.
id - The id (number) of this cluster node to identify itself with in the
cluster. The default is based on local machine IP.
password - The password configured for cluster access. Needs to match that
of the other nodes in the cluster.
port - The port to transmit and receive cluster data on. The default is
9127.
username - The username configured for cluster access. Needs to match that
of the other nodes in the cluster. -
i have connected my iphone to pc through itunes after adding a music and removed my phone there is no content in my phone what should i do plz help mee
Greetings michealjerold,
When syncing between iTunes on your computer and your iPhone, be sure to use the procedures in this article -
Sync your iPhone, iPad, and iPod with iTunes using USB - Apple Support
Thanks for using Apple Support Communities.
Be well,
Brett L -
while trying to access my local network I get the message..."The page could not be opened because server cannot be found." This, after updating to Yosemite and paying (again) for the server app.
It's absolutley scandalous that a company with Apple's resources can let this happen. They should have staggered the release by region rather than opening the flood gates. The upgrade itself took me about 10 attempts to download it, and then I thought I was home free. That was until it rebooted and won't activate. It's over 2 hours now.
Scandalous! -
After installing ios 5.1 on my iphone 4s, some apps are being closed automatically after a few seconds. I've tried a restart and a total reset. nothing seems to work. Any solutions?
The problem Apps may need to be updated. Or maybe your iTunes account needs to just update itself on your iPhone. To do this, install a free App from the App Store on your iPhone. Tap App Store app on iPhone, select and install a free App. When that is done try the problem Apps to see if they work OK again.
-
After updating to Mavericks and trying to updates for my apps I get : This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled. My apple id has always been .mac but after the update I used .me. Are these not synonymous?
Hi everyone yesterday I was experiencing the same problem I am glad to share its fixed now for me
"This issue is only related to our Apple ID and to to those specific apps which we already have on phone or had installed on phone before except for those apps which we already have in purchase history AppStore>Updates>Purchase(on iPhone) History(having cloud icon next to them) it's something related to our purchase data
*ITS NOT RELATED TO PHONE OR MAC!
*RESETTING OR UPDATING THE DEVICE WONT MAKE A DIFFERENCE!
(As in my case it was on iPhone 4 7.1.1 iPhone 5s 7.0.3 and iTunes of course )
Here is how I got it fixed
I contacted apple support via chat method and I asked about a solution giving my info.she told me that she submitted my application and in order to resolve this I should not be using my AppStore ID for any purchase for at least 30mins as doing so may not resolve the issue so I checked it after couple hours and it's fixed
(As I read in some other discussions that some people asked for solution from apple support and they told them to reset the device or so.. You may need to make your statement clear that it's appearing both on iTunes and iPhone ) -
After software update (Sept. '09) apps don't work and some missing
Plugged my phone in and itunes said there was an update I needed to install. Did that then it said there was a problem with the phone and it needed to be formatted before itunes could read it, did that too. Then while it was syncing up again after formatting it kept telling me there was a problem and items could not be found. All downloaded apps, some are missing completely from the phone, are no longer working. HELP!
expresso3 wrote:
yes i am fully aware of that!!!
This "i do not see an update when i connect to itunes!!!!" suggested otherwise.
the post says "after software update (sept. '09) apps don't work and some missing"
there has been no update in sept 09!!!!
Perhaps the OP doesn't connect the iPhone to the computer very often.
Phil -
Ive backed up my phone and restored it after updating the software and now a lot of my apps are greyed out and i cant access them via the phone interface
I can only access them via the App storeI did plug it into itunes and then backed it up to the cloud (im actually wondering if thats my problem)
then restored it from the cloud.
Maybe I should restore it from the computer (when its plugged into itunes?)
thanks sberman -
Even after installing new batteries and switching it on my magic mouse does not work. Sometimes it works but switches off (indicator light goes off) on its own after a few minutes.
Try resetting the PRAM and SMC. Try making the device a favorite .
Barry -
All Mac apps don't work after cloning on new hd.
All Mac apps don't work after cloning on new hd.
I used CCC to clone 10.6.8 then onto new drive. Everything works BUT all Mac apps.
Error: You can't open the app(s) because it is not supported on this type of Mac. (On MacBook 2011)
Thanks for your help.All good. Just drag and dropped each application and they worked until I did a restart. Then repaired permissions and everything works.
Maybe you are looking for
-
Why won't the Mac Mini connect to the internet but won't browse
Here's an odd one...I hook up the mini with an ethernet cable to the cable modem - it finds the settings on it's own - IP address, subnet - the whole thing. That's just great - go to the activity monitor - and look at the network - packets going and
-
How can i access to components of a table?
Hi, I have a table and i need to set to some componen's value in the prerrender method. Some components are asociated with the database and others not (i want to modify the second case) . I dont want to modify all rows. What sould i do? Thanks in adv
-
Error with multiple accessors in 10.1.2.1
I've an Entity say A wich has assiociations to 2 entities say B and C. When I create a VO including both B and C and I try to reference also A I can choose both associations (good) but the query it creates uses allways the first one also if I chooes
-
Hello, I want to display my tweets in flash using as3. Is there any tutorial teach me how to do that. please ?! Regards,
-
Integrating Oracle Mapviewer 12c in Endeca Map Component
Hi, I m trying to use my own mapviewer for the map component of Endeca Studio 3.1. For this, I have made the necessary changes in the following fields in Framework settings: df.mapViewer: The URL of the MapViewer instance. By default, this is th