After adding SPF records for Hybrid Development some external mails bounced back with error SPF Unauthorized mail is prohibited.

Added v=spf1 include:spf.protection.outlook.com -all and the txt token for the Exchange 2013 hybrid configuration, now some mails bounced back with the error "SPF Unauthorized mail is prohibited". What could be the cause? Should I customized
the SPF record but it is not mentioned in the procedures for Hybrid configuration to do that. 

Hi,
Would you like to mark Ed's reply as an answer so that others can find the solution easily.
Have a nice day : )
Thanks
Mavis
Mavis Huang
TechNet Community Support

Similar Messages

  • DNS spf record for Microsoft

    The spf record for Microsoft has a “ ~ALL “.  What does this do and how do we make use of the same for our domain names?
    NSLOOKUP Output for Microsoft.com:
    > server 4.2.2.1
    Default Server:  vnsc-pri.sys.gtei.net
    Address:  4.2.2.1
    > set type=ANY
    > microsoft.com
    Server:  vnsc-pri.sys.gtei.net
    Address:  4.2.2.1
    Non-authoritative answer:
    microsoft.com   text =
            "v=spf1 mx include:_spf-a.microsoft.com include:_spf-b.microsoft.com inc
    lude:_spf-c.microsoft.com include:_spf-ssg-a.microsoft.com ~all"
    microsoft.com
            primary name server = dns.cp.msft.net
            responsible mail addr = msnhst.microsoft.com
            serial  = 2007053102
            refresh = 300 (5 mins)
            retry   = 600 (10 mins)
            expire  = 2419200 (28 days)
            default TTL = 3600 (1 hour)
    microsoft.com   MX preference = 10, mail exchanger = maila.microsoft.com
    microsoft.com   MX preference = 10, mail exchanger = mailb.microsoft.com
    microsoft.com   MX preference = 10, mail exchanger = mailc.microsoft.com
    microsoft.com   internet address = 207.46.232.182
    microsoft.com   internet address = 207.46.197.32
    microsoft.com   nameserver = ns4.msft.net
    microsoft.com   nameserver = ns5.msft.net
    microsoft.com   nameserver = ns1.msft.net
    microsoft.com   nameserver = ns2.msft.net
    microsoft.com   nameserver = ns3.msft.net
    ==
    Thanks,

    Mechanisms are prefixed with qualifiers:
    "+" Pass
    "-" Fail
    "~" SoftFail
    "?" Neutral
    Mechanisms are evaluated in order and when no matche, the default will be "Neutral".
    If there is no SPF for a domain, the result is "None". If a domain has a temp error during DNS processing, you get the result "TempError" (called "error" in earlier drafts). If some kind of syntax or evaluation error occurs (eg. the domain specifies an unrecognized
    mechanism) the result is "PermError" (formerly "unknown").
    Evaluation of an SPF record can return any of these results:
    Pass -The SPF record designates the host to be allowed to send accept
    Fail -The SPF record has designated the host as NOT being allowed to send reject
    SoftFail - The SPF record has designated the host as NOT being allowed to send but is in transition accept but mark
    Neutral - The SPF record specifies explicitly that nothing can be said about validity accept
    None - The domain does not have an SPF record or the SPF record does not evaluate to a result accept
    PermError - A permanent error has occured (eg. badly formatted SPF record) unspecified
    TempError - A transient error has occured accept or reject
    Marcus @ www.wormy.com

  • After doing the recording for transaction fpcj, the values are not being se

    after doing the recording for transaction fpcj, the values are not being sent to the g/l.

    HI,
      When you are recording.. you might be creating the values... ensure that they are updated into the GL before u write program. I doubt you might have missed the save ..
    Thanks
    Mahesh

  • I bought a used PowerMacPC G5. I can burn and read DVDs, but I can't read or burn CDs. The CDs are not even recognized. After the drive searches for a while, the CD is ejected without any error messages. The CDs work okay on my iMac.

    I bought a used PowerMacPC G5. I can burn and read DVDs, but I can't read or burn CDs. The CDs are not even recognized. After the drive searches for a while, the CD is ejected without any error messages. The CDs work okay on my iMac.
    I am running Mac OSX 10.4.11. According to the System profiler the CD/DVD drive is a "PioneerDVD-RWDVR-112D." When I compare the information under this heading, the only unusual difference from my iMac is that the G5 reads "Burn Support: Yes (Unsupported)." My iMac reads "Burn Support: Yes (Apple Shipping Drive)."
    Under the System Preferences the options are set to "Ask what to do" when a blank CD or DVD is inserted. Music CD set to open iTunes, Picture CD set to open iPhoto, Video DVD set to open DVD player.
    Do you have any suggestions?
    Thanks, Jack

    Hi Jack, great help so far!
    Internal...
    http://eshop.macsales.com/static_pages/Framework.cfm?page=superdrive/sdl_powerma c_g5.html
    External be sure it's Firewire & not Bus powered...
    http://eshop.macsales.com/shop/firewire/optical-drives/

  • My iPad Air will not recognize my newest Apple ID e-mail address for cloud access. It continually reverts back to an old e-mail address that I no longer have access to and don't remember the PW for. How can I fix this?

    My iPad Air will not recognize my newest Apple ID e-mail address for cloud access. It continually reverts back to an old e-mail address that I no longer have access to and don't remember the PW for. How can I fix this?

    Didn't work but thx
    Mark Flohr
    [email protected]
    949-636-3069

  • After printing 12 records for a employee then automatically goto next page

    hi..
    i am facing one promblem in smartforms and i am not able to rectify that , my requirement is that if a user enter a single employee code then  output must comes in 1 page with deatils of 12 months and if user enters in range eg.
    from employee code 1 to 50 then all the details of 12 months comes in single page  for each employee and after printing 12 records its directly comes to another page and here again print 12 records and goes to next page...soon..
    plz help on this ..
    john

    John,
    The smartform is called for each employee so when the employee range is given in the selection then the smartform is called for each employee in the print program.
    Check the print program and change the logic/code .
    For Example: in the loop if the Form is called for every new employee using the the code AT NEW then place the code for calling the Form using AT  LAST in the loop.
    Regards..

  • HT5654 my ipad is not working i just install a software update  after that it ask for restore ipad when i did that it show error 3194?

    my ipd is stop working after i install a software updates it ask for restore ipad when i did that it show error 3194?

    savvyfromvic wrote:
    ...  error 3194?
    Please see the  More Like This  section on the right.
    Also... see item 3 Here  >  Community etiquette

  • HT1349 How can I obtain an original receipt for a Time Capsule (external hard drive back up) that was stolen?  I want to get the serial number of the device.

    How can I obtain a receipt for the purchase of my Time Capsule back up external drive.  My drive was stolen and I am trying to find the serial number of the device.

    Unless you registered it, for warranty purposes, with the manufacturer, there's no way.
    Or if you have the box it came in, the box may have the S/N.
     Cheers, Tom

  • How do I Refresh an Indexed Data Bound Table after Adding a Record

    I have a MySQL table which is indexed (ie. idnum). I created a table component binded to this table. This means everytime I open, I would see my records sorted according to idnum.
    Problem:
    When I add a record, it always reflect on the last row. How do we refresh the table without quiting the browser?
    Thanks in advance

    After appending the row and setting column values, you could do cachedRowSetDataProvider.commitChanges() and cachedRowSetDataProvider.refresh()
    That could reorded the rows per your expectation.
    Regards,
    Sakthi

  • Reg: vacancy for LabVIEW developer in Bangalore, Chennai and Delhi with (1-6) years experience

    Recruitment Process for LABVIEW: Tele Interview in case of outstation candidates. Bangalore candidates will have to first come for a Written Test (Technical + Analytical), 1-2 rounds of direct technical interview.
    Degree/Branches:  B.E / B.Tech in Electronics / EEE / E&C / E& Instrumentation .
    ROLES AND RESPONSIBILTIES OF ASSOCIATE ENGINEER-SEG:
    Development
    1. Responsible for developing software for the project/module allotted to you with smooth coordination and smooth handing over of the work executed by one to another member in case of change of projects.
    2. Expected to work on multiple projects, project dead line, adhere to coding guidelines and update your progress on the project on a weekly basis to your immediate supervisor.
    3. Developing the software strictly as per the requirement specification, design and Bug free.
    4. Responsible for building a trouble-free system to the satisfaction of the customer.
    Installation
    1. Responsible for installation of hardware and software at customer site for coordinating with the vendor and Manager – Sourcing to see that works done by the vendor is as per requirement specification
    Customer Support
    1. Responsible for providing support to the customer on the system supplied by the Captronic Systems in the past as well as present.
    2. Attends to the support case within 48hrs(local) / 96hrs(outstation ) / 96hrs(out of warranty) of reporting and collecting the Support Closure Report from the customer and submit it to the SBU-HEAD
    3. Informs Support executive with Support Status, Action Taken and Support Closed On
    Training
    1. Responsible for providing training to customer on the systems supplied by Captronic Systems.
    2. Responsible for in-house training to newly recruited engineers.
    Testing
    1. Responsible for testing code developed by you, by another developer and testing entire system at the customer site.  
    2. Responsible for testing hardware supplied by Captronic System and log the test report on the hardware test register.
    Sales Support
    1. Expected to travel with sales team to provide support to sales-team in proposal making at short notice and perform flawless pre-sales system and requirement study.
    General
    1. Expected to take part in technical sessions and keep yourself abreast with the recent product released and technical advancement made
    2. Expected to become domain expert is at least one field and to constantly improve coding style and knowledge.
    Quality
    Responsible for implementing the project methodology and quality policy of the company for all activities under your purview
     Interested candidates may forward your resumes witheir current CTC and notice period to [email protected] . Salary is never the Constraint.

    SANDU SUNITHA
    D/o.S. Venkateshwarlu,
    H.No:11/57, Kothapeta,
    Maruthi Nagar,Dhone,
    Kurnool (Dt.),
    Andhra Pradesh.
    E-Mail:[email protected]
    Mobile : 91-9963586292/08884822259
    Date: 09/ 05/ 2013
    Respected Sir/Madam,
    I have done my masters in  Control Systems Engineering in Electrical
    branch from Malla Reddy College of  Engineering. I am a well organized
    person, with good knowledge about the subject, able to do
    multitasking, able to work within a team and have excellent
    communication skills. As a good Engineer and excellent team player I
    can handle the responsibilities and challenges of the post of an good
    engineer to its fullest.
    I have worked for 6 Months as Project Trainee in CSR INDIA PVT LTD. My
    responsibilities in that institute include Testing, Reporting and
    Debugging, Updating the bugs as a trainee fresher. I was a part of the
    team that designed MERCURY TESTING TOOL, world's Best Automation tool
    today. I tested the model and executed the changes.And i had worked as
    Project Engineer in FUSION ELECTRONICS on Wonder ware SCADA. Presently
    working as Project Scientist in NAL (National Aerospace Laborateries)
    under Research and Development of IVHM(INTEGRATED VEHICLE HEALTH
    MANAGEMENT) Project on MATLAB/SIMULINK ,Labview ,Wireless Sensor
    Networks,WatchDog and Testing.
    Here is the list of the documents enclosed with this cover letter.
     1. Resume
    I hope that you find these of worth. I assure you that if selected; I
    will not let you down and would prove to be an asset for your reputed
    industry.
    Sincerely yours,
    SANDU SUNITHA
    Attachments:
    SANDU_SUNITHA(29_Apr_2013).doc ‏176 KB

  • HT5796 I restored my phone after resetting all settings for an international unlock.  I had backed up everything under Gail-PC as the device name Itunes.  After I restored the device and went to sync my phone it now says the last time i backed it up was M

    I had Sprint unlock my phone for international use.  I backed up my phone to Gail-PC on Itunes and then reset the iphone 4S.  When i went to resync the phone after the reset my computer now says the last time it was backed up was March 2013.  I backed it up prior to and had no computer error.  Now it shows the divice Gail-PC no longer exists in Itunes and only Gail's Iphone shows up.  I upgraded to IOS 7 recently, I don't know if this could be an issue.  Help what do I do know? I have lost all my messages and data from the last year.  This computer does not have a backup.  I only have 5 Gb space on Icloud so the Imessages did not get saved there.  Is there any help for me now?

    Thanks for the reply!  Yeah that's pretty much what I figured.... I just find it upsetting that it didn't tell me the reset had anything to do with backing up data and made it sound like it would save everything on my phone regardless.  Thanks again for your response

  • MX records for email - how do I set it up with Godaddy info?

    This is the info I got from Godaddy:
    Priority      Points to:                                        TTL
    10               mailstore1.secureserver.net           1 HOUR
    0                 smtp.secureserver.net                    1 hour
    Godaddy says I need to include both.
    But when I do the steps from Adobe, it only lets me add 1 mail server... so... how can I add both of them?
    Business Catalyst Help | Use an external email provider

    Hi!
    Just go to your domains page and add a new MX record: http://prntscr.com/64jmbc
    Kind Regards,
    Alex

  • Apple is not allowing for me to make purchases keeps notifying me with error:0

    ^^

    There is enough balance on my card cut each time I attempt to make in game purchase it tells me I cannot connect to iTunes Store and to contact apple
    Your card may have been blocked for security reasons. You have to talk to contact Apple - only they will be able to help you.
    Try to email the iTunes Support using this form:  https://ssl.apple.com/emea/support/itunes/contact.html
    Or give Apple Support a call . See this webpage on how to contact Apple Support in your country: There are either telephone numbers given or an email form:
         Apple ID: Contacting Apple for help with Apple ID account security
    Explain, that you need help with an account security problem.

  • HT4889 After migrating Safari will not open up. It's coming back with "Safari quit unexpectedly".

    Just purchased a new MBA, I'm trying to migrate my files from my MBP to my MBA using the Apple Cap. Safari is coming up with an error and will not open. The message from Safari is stating: Safari quit unexpectedly. I'm running MAC OS X 10.7.4 on my both MACs. Any ideas?

    https://discussions.apple.com/thread/4251807

  • Blackberry 8130 Rogers - some mail bounces back

    If someone sends an e-mail to me at my main address (shaw.ca) which is also forwarded to my Blackberry they receive a message back from the Blackberry account saying that the message could not be received.
    I did however in fact get the message on my Shaw acvcount which also shows up on my blackberry.
    My blackberry e-mail address appears to be correct in my profile.
    This seems to happen only when the e-mail is one that is sent to a group that I am part of with other addresses in the To: __________________
    Any ideas on solving this problem?

    eetonaee,
    It could be an Auto-Population issue. If the user is using a program like Outlook, have them create a new email. Have them start typing your name/address and press the down arrow key to highlight and delete. Once deleted, have the user entery in your full email address again.
    Keep us updated.
    Office2Mobile
    Poor Service and the Worst Support provided by VarDynamics http://vardynamics.com/

Maybe you are looking for