After all this... so far so good!

So, I did a Erase and Re-Install of Leopard. Repaired Permissions and then utilized my Diskwarrior as there were still a ton of things out of wack. Well, knock wood, all is well. I have all the buttons back in my Address Book (original issue) as well as Safari/Mail and am now re-importing all my music/photo's. Of course re-installing Final Cut Studio 2/iLife 08 took quite some time but all is smoking good so far.
Thanks to everyone for the help and patience.

Hi,
As I known, vmsal.exe is known as Windows Virtual PC Application Launcher. This executable manages seamless applications. You will have one instance of this executable running for each virtual machine that has seamless applications running.
If you encounter difficulties with vmsal.exe , you can uninstall the associated program (Start > Control Panel > Add/Remove programs) for a test.
You may try to start Windows XP Mode in Safe Mode. If it works, please try to check it in clean boot:
How to configure Windows XP to start in a "clean boot" state
http://support.microsoft.com/kb/310353
In addition, Check the link mentioned below as a reference.
http://windows.microsoft.com/en-US/windows7/install-and-use-windows-xp-mode-in-windows-7
If the issue persists, I also would like to suggest you uninstall and reinstall Windows XP Mode to check the result.
http://www.microsoft.com/en-us/download/details.aspx?id=3702
Hope it works.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

Similar Messages

Would like to upgrade to Dragon Naturally Speaking 11 from DNS 6 (which would also entail a necessary upgrade from Windows 2000 to 7) but understand after all this expense and trouble, DNS upgrade may not be compatible with Firefox 6?

Question
Would like to upgrade to Dragon Naturally Speaking 11 from DNS 6 (which would also entail a necessary upgrade from Windows 2000 to 7) but understand after all this expense and trouble, DNS upgrade may not be compatible with Firefox 6?
Main priority is voice activation upgrade. Ideas about how to proceed appreciated!

AFAIK, it's been over three years since a WinXP laptop or desktop PC has been sold; I specifically bought a laptop in June 2008 because it was being clearanced by that retail chain to meet Microsoft's deadline, and got it real cheap. It was tagged for the store manager to purchase, but he let me have it because I exceeded his expectations for the services I performed for his store and thought I deserved it. Anything that wasn't made for Vista-compatibility will be very iffy with Win7, IMO - so that basically rules out anything that was made before like Oct or Nov 2007.
Unless another DNS 11 user happens to see this thread and can verify whether it works in Firefox 6.0 or not, I don't what to recommend except for you doing a web search to see what other DNS / Firefox users have to say about compatibility.

TS4148 What if this happens after all this has been done and checked!?

After all the trouble shooting advice and carrying out all checks what's wrong if this problem is still occurring even with iOS 6!?!?

Peterk82 wrote:
After all the trouble shooting advice and carrying out all checks what's wrong if this problem is still occurring even with iOS 6!?!?
you failed to mention what the actual problem was...

Whats going with itunes store ? after all this updates. win 7 64 bit store does not upload completly and very slow, no nav bar.

I re-installed itunes and by this i mean part by part itunes, quicktime and so on. Once I re-installed it looked like all was going well. I went to the store and upload like it use to before the upadtes. Than I pluged my Ipad2 no problem but I went to store once more the problem started agian the up-load was very slow it didn't up load completly. the nav bar on the store page is missing no apps, music, books,tabs are all gone. I think it has to do with the new itunes upates in the last few days. I also did the firewall and anti virus off step no fix and i'm running Norton 2011. Has itunes put any message on this ? Is it only window 7 64bit with the problem ? Oh one more thing I was getting a 3259 error but that looks like is good now, but it did take me a few days to download one book and one app the download is very slow.

Hi,
I am using a Nvidia 4200M adapter in my Laptop, Driver 266.96, Direct X 11
In my desktop I am using an ATI XFX 6950, latest revision drivers (I am not at home right now so I cant get that info).
The issue I did describe above, but it was a long explanation.
In some flash games the game files load initially and get as far as the "click to start" button. Then the flash area usually goes either all white or all black (usually depending on the falsh game default background color) and then it stays that color. Cant see anything after hitting start (usually most games have an intro video or animation before the game starts, but I cant see any of it.
For the very few games that do start, the flash game or application does not seem to work correctly in that when the rare game starts, it wont save any game files or save files to the pc and so if I exit the game (navigate away to another page or close browser) and then later come back, even though I click the option to save games (and ensure that the flash application slider shows it can save files and lots of space) it does not save and I have to start from the beginning all the time.
More explanation I gave above.

How is the iMac G4 performing after all this time?

I have a 1TB hard drive connected to an AirPort Express which have 2 500GB partitions, one for downloads, my itunes library and the other for time machine backups. I use this itunes library on my macbook, and is not working as expected. Sometimes all the artworks disappears and is very slow to manage the library without an ethernet cable connecting the PORTABLE computer on the AirPort... it's really boring. So, i want to buy a computer to use as iTunes & print/scanning server, but i don’t want to pay much for this.
The iMac G4 is an incredible beautiful machine which i wanted since i was 7 years old. I really want to buy a refurbished one, but i need to make sure that it can run iTunes 10 and OS X Leopard or the machine will be useless and a waste of money.

Be aware that all the PowerMacs are pretty much dead in the water for many modern web pages. The technology in those pages abandoned the "G" series processor long ago. I keep my G4 Tower limping along on the Web by using TenFourFox. Web sites see it as a reasonably current version of FireFox--newer than any version of FF that will run on a G-series--so you don't get all the "this browser is not supported" messages, but current versions of TenFourFox do not support plug-ins so you can't run Flash player, meaning no videos will play that rely on Flash.
http://www.floodgap.com/software/tenfourfox/
If you go for a G4--they are indeed lovely to behold--I recommend going for the latest version with a 1.25Ghz processor. Theose also have USB 2.0 so are not so sluggardly with backups to external drives. They can also handle up to 2GB RAM with teh proper models.
Here are my "big" caveats:
1) The G4 iMac was never inteded to be user-serviceable. If you have to max the RAM, replace the hard drive or the optical drive, or even chenge a little $5 internal backup battery, it is a major teardown that is not one for the average user. Failing to reassemble to strict requirements can cause the computer to overheat and fail. If you are not up to the challenge and seek outsire help, be aware that Apple no longer will do any work on the G4 iMac.
2) Software: Almost no new software will run on a G4 Mac. You will be searching for used packages contemporary with a 2004 computer. Office 2004 is the sweet spot for that one. However, Office 2008 will run on a G4, G5, or an Intel iMac.
3) Check the chrome display arm carefully for proper movement and that it stays in place. After 10+ years, many are now rather "tired" and droop unattractively.

Still a mess after all this time

This image says it all:

Say you are tired of login in over and over?
Just a tadge.
Today, Jive's bug du jour seems to be to randomly truncate threads (i.e., I can't see past certain posts). It only does it with some threads, and only some of the time. Earlier today, I couldn't see the avatars. I almost passed out from the deprivation; my forum experience was less "rich" than I've become accustomed to!
(This is beyond pathetic. I hear Adobe is, like, a major software company, but to have this excrementious forum persisting in its excrementiality after months and months (and after many, many, many complaints) is.....um..... beyond pathetic!)
I blame...... Bush!
(Sorry..... that just popped out. I really blame Obama. )
(OK, I lied..... it's really Bill Clinton's fault! )

Temp still high after all this

Well after my volcano 9 and artic silver 3 came in I installed them. And the temps still are the same 69c idle and up to 85 under load.
My system is stable though, no bsod or anything at all.
k7n2-l
amd xp 2200
512 of 2100 ram
gainward gf4 4200 golden sample
32x burner
80 gig west digital 7200 special ed. 8 mg
sb live 5.1
420 watt ps,
chemming black server case
My old system, in my girls room
k7s5a mobo
amd xp 1800
temps on that are a rock solid 32c idle and 43 under load with stock heatsink
maxtor 7200 40 gig
16x dvd
ati radeon 9000 pro 128 meg
256 of 2100 ram
modded case with window and lights etc...
antec true ps 350 watts
both are running xp home ed, with sp-1
I took the 1800 out and put it in my msi board and get the same temps as above, then out and put it back in the k7s5a, and get the temps above.
Something has to be wrong with this k7n2 board.
But like I said never had a crash or and problems at all.
I just figured that getting the new fan and artic silver would help alittle bit on the temps, but i guess i was wrong.

Quote
Originally posted by Deathstalker
carcasswth,
The nForce Temp Sensor has been known to read about 10C too high. My guess in your case it is reading high too. I am sure a BIOS Update will fix that problem.
I would not worry about it if you have and Volcano 9 on and the AC3 is given time to cure, you will be fine.
Take Care,
Richard
carcasswth,,
Just built my nforce2 system tonight and the bios temp reads,,45c,,,,i have the 2600 and using AC3 also....
is that normal? about right? hi? low?

So how come after all this time, iPod touch still doesn't have a battery percentage option under the usage section...?

Why????

HI rjdfja,
Sorry to interupt Nickyizcool but the battey percentage feature is not available on the iPod Touch as it is with the iPhone and iPad. Only Apple knows if it will be added in the future. If you like to leave them feedback about this, use the form on this page.
http://www.apple.com/feedback/ipodtouch.html

Having trouble with videos (not audio) of you tube . . . we use them for training and don't want to use IE after all this time !? HELP . . .

''''''Solved the Problem by un-checking “Enable Hardware Acceleration" after right-clicking a Flash Video and clicking Settings !! ''''''

Solved the Problem by un-checking “Enable Hardware Acceleration" after right-clicking a Flash Video and clicking Settings !!

Hate 7.o.1. Wasting so much time. Will go back to Safari unless I can revert to my former version..And after all this hype about upgrading!

Don't like format.
Can't play Lexulous with robot.
Can't search on Amazon.
I don't have time for this, guys!

Thanks for responding.
I think it was 3.1.6 ,some time in 2010,but I can't check in my update history( I could yesterday) since it now says I have NO updates.
Getting rather too complex for a relative neophyte like me.
I obviously need help!

HT5167 I had started to download this about 10hours go-it looks like it's telling me it will take over 2000 hours to doit! It is 1% installed after all this time.What am I doing wrong?

My computer is telling me it will take over 2000hours to download new OSX LIon v10.7.4 update.I had it downloading today for 10 hours and only 1% was done. What am I doing wrong?

You don't say what kind of connection you have, but if it's dial-up, you'll be old and gray before it finishes.

HT201263 ITS NT WORKING YET AFTER ALL THIS STEPS IT IS SAYING THAT AN ERROR HAS BEEN OCCURED WHAT SHOULD I DO NOW........?

i want it recover till tommrow

Research the Error code and see if there are steps to resolve it. If you forgot the Error code, try Restoring your iPhone with iTunes on a different computer, if an Error code is given, write it down, so you can look up the cause and possible solution.

Hello hi, i just won't to ask, if there has been any changes on how to find a stolen phone, did some one come up with a fare and good solution. as it is not fare at all when some one could use it for free and there is a lot of things could be done to this

hello hi, i just won't to ask, if there has been any changes on how to find a stolen phone, did some one come up with a fare and good solution, new Apps. as it is not fare at all when some one could use it for free and there is a lot of things could be done to this condition, no one seem to care,
i have a story about my sister, am talking on her behalf, she got stolen her phone at a caffee when she just come from a horeble exam, she was very mad and having haedace for not doing well at the exam, i ask her if we could have coffee before we go home, once she sate; while i was getting the coffee for her, some one snicked to her pocket and took the phone, immidatly she feelt it and went on to searching, but nathing was hopefull. what makes it more heart braking is that she worked day and night just to buy the phone and pay for her books and so on as a student. she use to work 16 houres a day before she had to start school. 8 houres in one place and then to the other place. and she was always demanding for more houres to work; one day her boss saw her on her other job and she was serprised to see her and saied OHhh my God Milly if you work like this, i wonder if you servive, how could you also ask for more houres, My sis had to do it she has no parents or any thing, well the phone was taken after only two months of having it. the sad thing is she stile dream having it even though she can't think of buying againe. well me i have tryed a lot of things but i know some were out there there is a solution for people like this, it is not always fare for some one who has payed up to 800 to just loose his ......
Thnks

I'm sorry, but your sister, unless she had already turned on the "Find my iPhone" feature and the person who took the phone has not disabled it, is out of luck. She should report the theft to local police authorities, including the serial number of her iPhone. While her experience is unfortunate, there are good reasons why Apple cannot do anything else about it.
I hope she gets her phone back.
Best of luck.

MacBook Pro 10.6.8 My @me account has been wiped of all mail, will not send or receive and iCal will not recognise user name or password even though i haven't changed it. All this after a scheduled software update. Any ideas??

MacBook Pro 10.6.8 My @me account has been wiped of all mail, will not send or receive and iCal will not recognise user name or password even though i haven't changed it. All this after a scheduled software update. Any ideas??

kwmlr439 wrote:
CSOUND Read the title please:
Re: Macbook Pro 10.6.8 RAM Upgarde to 8 GB
The amount of RAM is not dependant on the operating system. It is all about the model of you Mac.
10.6.8 is the version of OS X that is installed on your system. It has no real baring on the amount of RAM that CAN be installed.
Personally I have never had good luck with Corsair RAM. I have always had good luck with Crucial and Kingston.
Message was edited by: Shootist007
Message was edited by: Shootist007

Can't login after 10.5 install on G4 PM, all this threads, still no clue!!

Hi all,
After reading numerous threads, still I cannot find an answer!
I installed Leopard on my Powermac g4 1.25 DP but I am not able to log in. I can only select the user "other". I have tried resetting the root password and tried to login with username "root" and password "what i previously selected" , but it did not work. All it does all the time is "wiggle" and return to the login screen.
Is it helpful to do a reinstall of Leopard using Archive and Install?? I read this solution works for iMacs.... Does it work for a Powermacs too??
Is it helpful to also change the "user" password (and not only the System administrator (root) password)???
Is it helpful to revert to Tiger and change my password there, before installing Leopard??
When I reset a password in the utility menu on the install disk, I type and retype the password. Should I then click "reset" or "safe"???
I hope anyone here can solve my problem or at least answer a few of my questions. Thanks in advance!!
Thomas

Greetings,
You might try to boot the machine with the installation disk, and after the screen where it asks for the language click on the arrow and wait until you see the menu bar at the top of the screen. It may take a few seconds to a minute.
Go to Utilities and there is a reset password selection. Use it to select the user you want to reset the password for. You should then be able to reboot and sign and take care of the other accounts. I've had to use this a time or two at work - it should work in your situation.
After you log in do a Repair Permissions. You can also do it from the install disk, if you still have some issues after the reset password procedure.
Good Luck - Cheers,
M.

After all this... so far so good!

Similar Messages

Maybe you are looking for