After AMD X2 3800 upgrade MSI Radio causes stop error

Hi!
First of all sorry for by bad English
I have an MSI TV Anywhere master card for about two years now.
Until now it was running fine, using the updated drivers from MSI's site
This include the main driver, and the new WinDVR 3.0 and the updated MSI Radio
With these AMD vs Intel price wars, I've upgraded my Athlon Winchester 3000+ to a X2 3800+
The CPU is running fine
However, MSI radio immedialy gives a BSOD since I have changed the CPU
I have even got as far as reinstalling XP SP2 from scratch, and it still BSOD's :(
I get
STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER
How do I solve it?
Any other users having trouble with TV Anwhere Master with an AMD X2
CPU has run for several hours PRIME 95 and some heavy games with no crashes whatsoever
Just click on MSI radio and the mouse cursor wil freeze, followed by a BSOD and a reboot
Every time this happend
The only time when I could lauch MSI radio was when I booted Windows XP in safe mode
Thx in advance
Steven
System specs:
CPU AMD X2 3800 Socket 939
RAM 1Gb DDR400
Mobo Asus A8V Deluxe rev2 bios 1018, latest version
2x HDD WD Raptor 740 and Maxtor Diamondmax 10 250
AOpen A600A Case with 350W PSU by Fortron Source Power
PCI stuff:
SCSI Controller for scanner
TV Anywhere Master
Opti USB card
DVD, CDRW, and CDROM drive

Hi Stu!
Followed you advice, I looked a little more at the processor AMD procesor driver program
I already had installed the latest version, but it crashed too :(
However you suggestion had led my to try this:
* Removed the normal AMD processor driver
* Installed the AMD Fix for dual core processors from the AMD site
It worked!! Now MSI radio no more crashes!
knock on wood
I'll report back when there are errors
This is the page I got the utility from:
http://www.amd.com/us-en/Processors/TechnicalResources/0,,30_182_871_13118,00.html
It's the first tool listed
From the desc:
"The AMD Dual-Core Optimizer can help improve some PC gaming video performance by compensating for those applications that bypass the Windows API for timing by directly using the RDTSC (Read Time Stamp Counter) instruction"
Hope this helps anyone who has an AMD X2 an has similar problems
Actually, with the new drivers from MSI I'm quite happy with my TV Anywhere Master
Greetings & thanks everyone
Steven

Similar Messages

Bad CPU cause stop errors?

Does anyone know that a bad cpu cause stop errors in win2k ect.. or what would cause such errors? Bad memory?/

Hi,
It can be anything:
Bad CPU
Bad mounted CPU-cooler
Light powersupply
IDE cables wrong used
Harddisk broken
Mobo damaged
Metal standoff's left between the case and the board
Bad drivers
Broken videocard
Bad memory banks
Bad BIOS settings
There are probably a few more, but that's about what it can cause it.....
Start reading the trouble guide.... :D

RAM problems with KT3 Ultra 2 causing STOP errors in XP

I've run the NEC ncramtst program on my PC and its coming up with an error in the extended memory at adddress 1B8EE01C which probably explains the stop errors and problems I've been having in XP...
I've tried reseating the RAM and tried a different slot but it still returns the same error.
The PC is only 2 months old and I have only experienced stop errors in the last 2 weeks or so and usually are at random - and occur more often when copying files - or putting load on the PC.. any ideas why the RAM is only now causing errors and what the problem is?
Are the problems definatly being caused by RAM or could it be the motherboard?
Thanks in advance
Ben
MSI KT3 Ultra 2
AMD AlthonXP 2400+
512Mb PC2700 DDR RAM (with errors)
80Gb Hard drive
Geforce Ti4400 Graphics card
Modem
LAN

OK I found a few minidumps in the event log
The computer has rebooted from a bugcheck. The bugcheck was: 0x10000050 (0xde1d3ee0, 0x00000000, 0x804eef61, 0x00000000)
Error code 10000050, parameter1 e262ca7a, parameter2 00000001, parameter3 8053cb3e, parameter4 00000001.
Error code 1000008e, parameter1 c0000005, parameter2 8053cbb1, parameter3 ee5b1a40, parameter4 00000000.
The computer has rebooted from a bugcheck. The bugcheck was: 0x10000050 (0xe1fe9a18, 0x00000000, 0x8053cbb1, 0x00000001). A dump was saved in: C:WINDOWSMinidumpMini030703-10.dmp.
Hope these help

Plugging iPod in causes stop error

Ever since -I think- Sunday, whenever I try to plug my iPod in the USB portal, it causes some kind of stop error, showing a blue screen saying something caused a stop error. The code is 0x00000007, with some parameters behind it.
I don't understand, I recently installed Windows SP 3 via the Windows Updates, i don't know if that has anything to do with it...
Please help me, my battery is about to die and I really can't live without the iPod =( [lol]

I have the same problem on a Windows XP machine; I have not been able to solve it yet but here is one small piece of additional information: the 0x00000007 STOP error was happening before I installed SP3, and it still happens after SP3 was installed.

After installing a iTune upgrade I'm getting this error message

iTunes could not connect to the iTune store. Make sure your network connection is active and try again.
Anyone have any ideas?

Are you running any of Symantec's (Norton) or McAfee's Internet security products or anything similar, or an antivirus/antispyware application? There have been reports that some such utilities treat an upgrade to iTunes as a new application and can block the application from connecting. So you have to go in and reset the utility to allow iTunes. The same thing can happen if you upgrade the security product (this has particularly been a problem with recent McAfee upgrades).
Check the settings for your utility. If iTunes is still listed, remove and re-enable the exception for iTunes. Consult your utility's documentation for the appropriate procedure; you can find instructions for Norton on Symantec's web page for iTunes. You may also need to check the built-in Windows firewall as well.
Hope this helps.

Upgrading Illustrator cc causes launch error

I have updated this software this morning and it will no longer launch.
This is the error.
Verdana is installed and enabled. This is highly inconvenient. The update has broken the software and it is costing me money and time.

This is the suitcase view.

10.5 Upgrade + exteranl drive causing a error and itunes shut down

I installed 10.5 on my computer. I have alsways used an external drive to store my media. When I go to preferences it gives me an error message and shuts down itunes. I do not have enough memory to store my media on the internal drive. What can i do to fix this

You can find version 6.0.1 at http://www.oldapps.com/itunes.htm.

Planning To buy MSI K9N Platinum + AMD X2 3800+

Hello everyone,
as the title as Iam planning to buy a MSI K9N Platinum board with an AMD X2 3800+ for a new system build. Ive been out of the game for a while, the last time I was really up to date on computer technology is when the AMD XP 2500+ Barton was the hottest thing on the market, some what of a new comer to dual core technology. I have a few questions, mainly about the board it self. I did a little searching and that answered some of my question but I have a few more.
Ive read a lot about the shutdown problems from the board when transferring large files or burning DVDs. I have a few questions about that.
From what I see so far, this is a very informative forum and I appreciate any and all information. So here goes:
1) It says on the MSI website that the ram slot for this motherboard is at 1.8 volts. The ram Iam planning to get is OCZ Platinum EL XTC PC2-6400 1GB 2X512 DDR2 CL4-5-4-15 240PIN DIMM Dual Channel Memory Kit. On the OCZ website it says that the ram modules run at 2.1 volts. My Question is if I stick this ram in the mother board will it boot long enough for me to go into the bios and change the ram voltage to 2.1 volts?
2) Now Ive read about the shutdown problems with this board. Ive seen a lot of people up the VCore to 1.35V. If I do this along with a bios flash, will this take care of the problems?
3) Now the dealer that Iam buying my PC from didn't have this board in stock for the last week. He just got them in 2 days ago this week. Therefore Iam assuming he has the lastest version of these boards. Now are these problems taken care of on the new version of these boards? If not what can I do to get rid of them?
4) Is there anything else I should know about this motherboard?
Thanks for the the help.
Ron

1) It says on the MSI website that the ram slot for this motherboard is at 1.8 volts. The ram Iam planning to get is OCZ Platinum EL XTC PC2-6400 1GB 2X512 DDR2 CL4-5-4-15 240PIN DIMM Dual Channel Memory Kit. On the OCZ website it says that the ram modules run at 2.1 volts. My Question is if I stick this ram in the mother board will it boot long enough for me to go into the bios and change the ram voltage to 2.1 volts?
Yes, you could set up manually the voltage to 2.1v perfectly I've got one k9nsli p, with an amdx2 3800+ whit 2gb ddr2 (512x4 twins pack corsair xms2 ddr2 800) that works at 1,9v
2) Now Ive read about the shutdown problems with this board. Ive seen a lot of people up the VCore to 1.35V. If I do this along with a bios flash, will this take care of the problems?
My shutdowns problems was resolved by unnistallin' nvidia IDE controller, nothing about vcore or flashin bios... I keep original bios version 1.0 & Core center shows vcore at 1.33v
3) Now the dealer that Iam buying my PC from didn't have this board in stock for the last week. He just got them in 2 days ago this week. Therefore Iam assuming he has the lastest version of these boards. Now are these problems taken care of on the new version of these boards? If not what can I do to get rid of them?
Good question... 2morrow I'll check on the box of my k9 the part number and will post it
4) Is there anything else I should know about this motherboard?
The first week, I was desire burn my k9 shutdowns... shutdowns.... shutdowns... after I find the cause of that ShiX$/#(! (nvidi IDesuxs controller) my life is happy!
good luck
Thanks for the the help.
Ron

Newly Built System. MSI K8N Neo4/SLI Plat with AMD X2 3800 Crashing in all Games

I just built this system yesterday..
MSI K8N Neo4/SLI Plat with AMD X2 3800 latest BIOS 3.7 amd MB drivers
I have a Albatron Geforece 7800 GT PCI-E 256Mgs with the latest Drivers. 78
WINXP SP2 latest stuff.
DirectX 9.0C
I have 2 512 DDR3500 Memory Sticks.
SATA 160 Hard Drive
DVD 8X NEC Burner
All 3d games lok it up. 3DMark2001 SE locks it up too.
I ran Memtest and everything passed fine.
Anyway all 2d video works fine. but any 3d video screen goes black and the system locks up solid.
Any help work be appriciated
DaaDoctor

Welcome to the forum DaaDoctor
If you creat a signature (in profile) it will save you having to type your spec's out each time or us looking for it. Use mine as a template.
What PSU are you using ? Can you list the power output ? (writen on side of psu)
Going from your specs you listed your graphics card is very hungery on power so I would suggest your psu isn't up to the job under load.
Post the spec and we will know for sure.

MSI Radio displays 5 min after doubleclick..!

Hi,
my problem is that when I execute the MSI Radio application it won't start immediately - nothing on the screen, but the task manager shows it as executed with 99% CPU usage. After ca. 2 minutes it appears!
Then it works just fine.
BUT when i try to play with the settings and then return, it simply does not respond to anything e.g. tuning, ... and when I close it, I can still hear the radio quietly playing, so I have to reboot/relaunch.
Any suggestions???
Thx

I have the same problem also. I purchased a TV@anywhere plus and it worked fine. Reinstalled the TV Master and still the same problem. It is installed in a shuttle 61g, fresh windows xp sp2 install and using the latest chipset, video (GeForce), and MSI dirvers. Any help would be appreciated.

Help with K8N NEO 4 and AMD X2 3800+!!!

For christmas i got a new AMD Athlon X2 3800+ CPU. System Specs Below.
AMD Athlon 3800+ Dual Core CPU
MSI K8N Neo4 Sli motherboard, nforce 4 chipset
XFX Geforce 7800GT 256 MB PCI-E GFX Card
2X512 MB Corsair XMS 3200 Xtra low latency memory
Antec TruePower 2 550Watt PSU
Now, when ever i'm playing a game, at random time periods, the system will start looping the sound, and after a few seconds it will reboot. When it does this, the monitor will go into standby until it restarts,with the little amber light and everything. It does it more often on some games than others. The memory has passed a 24 hr memtest 86 with no errors, and this is the second psu i've tired and still get the same result. The psu in it right now is brand new. I dunno what to do. I'm tired of not being able to play my games b/c of this. The heatsink on the CPU is stock. Also on the graphics card. Temps never reach above 47C on the processor and 65C on the GFX card. Please help me.

I short of have the same problem.I got my pc about two weeks ago.
AMD 3800+ x2 Manchester E6 (Toledo E6 inCpu-Z)
MSI K8N Neo 4 Sli (came with 3.6 bios upgraded to 3.7 and 2 days ago 3.8)
Sapphire x1600 256 pci e
2x512 Corsair VS512MB400 value select(2,5,3,3,8 1T)
Tagan TG480-U01
The first day after a clean install i runned MSI Live update and it just froze (no other application running) force restart and then the hard disk was gone.Fixed it then updated all the drivers for mb graphics nvidia drivers AMD hot fix and M$ hot fix but still it just freezes.Today there were 2 one when i run MSI live update(??????) and another when using 3Dmark06(froze between tests).
Used memtest for 1 hour no errors no Oc althought when used MSI core cell Oc(bios) in comander mode froze in 1 min.Temps dont go above 41 42 (user mode 7/8 fan speed in core center when in Cool n Quiet temps reach 42 43 even 46 and it keeps the rpm near 1100 1200????????)when running games apps with stock fan.
Whats the problem

K8N Neo4 Platinum (PCB 1.0) and AMD 64 3800+ X2

Help!
I have a K8N Neo4 Platinum (PCB 1.0) and it had an AMD 64 3200+ single core CPU.
Now I've upgraded to an AMD 64 3800+ X2 dual core but the BIOS and MS Vista are seeing only the one core.
The BIOS is at the latest version - 1.D.
Whats' going on?
Hitch.

Quote from: hitchhiker on 20-April-07, 08:44:57
This motherboard does support the X2 CPU right?
It's listed as supported on the MSI website but has nayone else got both cores running on it?
Hitch.
Yes it does support X2
Did you clear cmos with power cable disconnected from psu?
Look at my signature for link to proper method.

My laser jet 100 color MFP M175nw is not working after windows 8.1 upgrade,

my laser jet 100 color MFP M175nw is not working after windows 8.1 upgrade, driver on your website fails to setup at 83 % with an error message

Welcome to the HP Forums MillaMagia,
I see by your post that the USB isn't being recognized.
I can help you with this issue.
Are you using the same USB cable? (known good USB cable)
You want to use the normal USB slot 2.0 cable and not the latest USB 3.0.
USB 3.0 are supposed to be backwards compatible.
Try another USB port on the Laptop, some of the USB ports are more powered then others.
I have provided a document to see if the printer is partially recognized in the device manager, which is causing the printer not to be recognized again. (the uninstall from the CD should have removed the entry and the printer from the registry)
Leave the printer turned on and the USB cable connected directly to the computer and the printer's power cord directly into a wall outlet.
How do I get into Windows Device Manager?
Here is a document for Identifying problems in Windows Device Manager.
Check to see if there are any hardware driver conflicts, you might see a ! mark or a red x beside a device with a conflict or unknown device, look under universal serial bus controllers, look for USB printing support or mass storage device, delete the entry by right clicking and select uninstall, OK.
Let me know how it was listed. (screen shots welcome)
If this is a Laptop then check the power management settings.
Access the device manager. Windows 8-How do I access the Device Manager.
Select universal serial bus controllers from the list, for each USB root hub, right click and left click on properties, for power management remove the check mark for "Allow the computer to turn off this device to save power". It allows the computer to limit or turn off power for this device.
Disconnect the USB, run the full uninstall and reinstall the printer software again.
If you need further assistance, let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Runtime Errors SYNTAX_ERROR in SAPLS_CODE_INSPECTOR after the ECC6.0 upgrad

we recently upgraded our development test sandbox from 46C to ECC6.0 using downtime minimized strategy for practice purposes.After a sucessful completion of the upgrade we applied all the support packages successfully upto the latest available. Upon testing we found that everything else works fine except code inspector. Everytime we go to transaction sci we get syntax error
Runtime Errors         SYNTAX_ERROR
Date and Time          08/20/2008 08:26:29
Short text
     Syntax error in program "SAPLS_CODE_INSPECTOR ".
What happened?
     Error in the ABAP Application Program
     The current ABAP program "????????????????????????????????????????" had to be
      terminated because it has
     come across a statement that unfortunately cannot be executed.
     The following syntax error occurred in program "SAPLS_CODE_INSPECTOR " in
      include "LS_CODE_INSPECTORTOP " in
     line 11:
     ""SCI_DYNP" must be a flat structure. You cannot use internal tables, s"
     "trings, references, or structures as components. ."
     The include has been created and last changed by:
     Created by: "SAP "
     Last changed by: "CRENSHAWDP "
     Error in the ABAP Application Program
     The current ABAP program "????????????????????????????????????????" had to be
      terminated because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Please eliminate the error by performing a syntax check
     (or an extended program check) on the program "SAPLS_CODE_INSPECTOR ".
     You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
r analysis
The following syntax error was found in the program SAPLS_CODE_INSPECTO
""SCI_DYNP" must be a flat structure. You cannot use internal tables, s
"trings, references, or structures as components. ."
to correct the error
Probably the only way to eliminate the error is to correct the program.
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
   To save the description, choose "System->List->Save->Local File
2. Corresponding system log
    Display the system log by calling transaction SM21.
    Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
    In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
tem environment
SAP-Release 700
Application server... "kiel"
Network address...... "138.254.140.161"
Operating system..... "AIX"
Release.............. "5.3"
Hardware type........ "000B7B2ED600"
Character length.... 8 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "kiel"
Database type..... "ORACLE"
Database name..... "UPD"
Database user ID.. "SAPR3"
Terminal................. "D800204486"
Char.set.... "en_US.ISO8859-1"
SAP kernel....... 700
created (date)... "Jun 22 2008 20:58:25"
create on........ "AIX 2 5 005DD9CD4C00"
Database version. "OCI_102 (10.2.0.2.0) "
Patch level. 166
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "AIX 1 5, AIX 2 5, AIX 3 5, AIX 1 6"
Memory consumption
Roll.... 16128
EM...... 8379840
Heap.... 0
Page.... 40960
MM Used. 705904
MM Free. 3481488
r and Transaction
Client.............. 070
User................ "CRENSHAWDP"
Language key........ "E"
Transaction......... "SCI "
Transactions ID..... "48AB59A7D7E00112E10080008AFE8CA1"
Program............. "????????????????????????????????????????"
Screen.............. " "
Screen line......... 0
Information on where terminated
Contents of system fields
Name     Val.
SY-SUBRC 0
SY-INDEX 0
SY-TABIX 0
SY-DBCNT 0
SY-FDPOS 0
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE
SY-MSGTY
SY-MSGID
SY-MSGNO 000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO 0
SY-DATUM 20080820
SY-UZEIT 082629
SY-XPROG
SY-XFORM
Internal notes
    The termination was triggered in function "ab_genprog"
    of the SAP kernel, in line 1551 of the module
     "//bas/700_REL/src/krn/runt/abgen.c#10".
    The internal operation just processed is " ".
    Internal mode was started at 20080820082629.
    Program name.........: "SAPLS_CODE_INSPECTOR ".
    Error message........: ""SCI_DYNP" must be a flat structure. You cannot use
     internal tables, s".
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
=> 64 bit R/3 Kernel
=> 64 bit AIX Kernel
=> Heap limit      = 2684354560
=> Stack limit     = unlimited
=> Core limit      = unlimited
=> File size limit = unlimited
=> Heap address = 0x11716f260
=> Stack address = 0xfffffffffff2a20
=> Stack low     = 0xfffffffffff2a20
=> Stack high    = 0xffffffffffff710
=> Stack Trace:
#AixStack() at 0x1000a2474
#CTrcStack2() at 0x1000a256c
#rabax_CStackSave__Fv() at 0x1000d0e04
#ab_rabax() at 0x1000cd7e4
#ab_genprog() at 0x100b3d5f8
#newload__FPCcP13TmpSubpoolDirUiPUi() at 0x1002194ac
#ab_LoadProgOrTrfo__FPCcUiPUi() at 0x10021905c
#ab_load() at 0x100218e2c
#ab_LoadMainProg() at 0x100820d6c
#dystartx() at 0x100ade944
#dy_cdiag() at 0x100833174
#ab_ctransaction__Fv() at 0x100ae1ef0
#ab_retdynp__Fi() at 0x100821c98
#ab_dstep() at 0x100821924
#dynpmcal() at 0x100e932e0
#dynppai0() at 0x100e905ec
#dynprctl() at 0x100e99d48
#dynpen00() at 0x100e8cc18
#Thdynpen00() at 0x1000f9ed4
#TskhLoop() at 0x1000fec7c
#ThStart() at 0x100115890
#DpMain() at 0x1017f4b14
#nlsui_main() at 0x1018e2b6c
We contacted SAP OSS about this problem and they suggested that we check our LS_CODE_INSPECTORTOP include in program SAPLS_CODE_INSPECTOR and revert it to the original version. We did that and still are getting this error. Any suggestions how to fix this issue. All advices are welcome.
Thanks.
Kamran

Nope... this is SAP standard code so I will reply to the OSS and wait for them to come back to you.
Regards
Juan

Problems After Win 8.1 Upgrade - Two Additional Partitions Both With Same Volume Serial Number?

An update from Win 8 Pro to Win 8.1 Pro has occurred automatically on one of my machines.
Prior to the upgrade (from memory) the machine had an OEM Partition (40MB), EFI System Partition (500MB), Recovery Partition (8.17GB) and OS (C:) partition. Only the latter was visible in Computer.
After the 8.1 upgrade there are two additional partitions, Recovery (500MB) and Recovery (450MB). All the partitions are now displayed in This PC as drives except the 40MB OEM Partition.
When viewed in This PC both the two new drives (that appear to equate to the new partitions) show as 499MB each with the same amount of free space. In Disk Management the first new partition is shown as 500MB and the second as 450MB.
I have SugarSync installed on this machine and since the upgrade it is displaying an error telling me it won't work because the two new drives have the same Volume Serial Numbers.
Clearly something has gone wrong with the upgrade:
Is there any way to resolve the Volume Serial Number conflict?
Is there any way to stop all these drives appearing in This PC?
Do I need the two new partitions and if not how can I get rid of them?

There is a fourth path to upgrading to Windows 8.1 provided by Microsoft. Microsoft have been displaying automated reminders from time to time on Windows 8 computers that Windows 8.1 update is available to download - from these reminders it is possible to
choose either Install or Not Now. Just recently these reminders have changed, they are instead notifying the user that the Windows 8.1 Update will be installed automatically or the user has options to postpone the installation for 1hr, 2hrs, etc. The
user of this computer tells me she went away from the machine and Windows 8.1 update installed automatically from one of these prompts.
I have seen these installation prompts on several of my customer's computers and they are not malware related (I deal with malware removal every day and would recognise this). However, I have scanned this computer with Bit Defender and MalwareBytes and there
are no infections present.
The only difference between this Windows 8.1 Update and the others that I have carried out is that it wasn't controlled and therefore I wasn't able to disable the security software (Bit Defender Internet Security 2015). This may be the cause of the problem.
I've uploaded the two screenshots you asked for - the two new drives are W: and Z: and SugarSync is reporting that they have the same Volume Serial Numbers. Note: X: and Y: were not visible prior to the upgrade.
There are two Windows Update logs at C:\Windows\ so I will upload both.

After AMD X2 3800 upgrade MSI Radio causes stop error

Similar Messages

Maybe you are looking for