After an unexpected shutdown, dispatcher not start.
Dear senior...
dispatcher has problem.
I don't corrective log off and have shutdown.
After all, dispather don't start.
I need to advice.
Have a nice weekend!
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid NSP
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 23
intno 20050900
make: multithreaded, ASCII
pid 2368
Sat Feb 10 10:52:31 2007
kernel runs with dp version 202(ext=109) (@(#) DPLIB-INT-VERSION-202)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2368) [dpxxdisp.c 1226]
shared lib "dw_xml.dll" version 23 successfully loaded
shared lib "dw_xtc.dll" version 23 successfully loaded
shared lib "dw_stl.dll" version 23 successfully loaded
shared lib "dw_gui.dll" version 23 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Sat Feb 10 10:52:34 2007
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0012.qqq.nxst) took 3 seconds
Sat Feb 10 10:52:40 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 6 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5209]
MtxInit: 30000 0 0
Sat Feb 10 10:52:41 2007
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpShMCreate: sizeof(wp_adm) 6160 (880)
DpShMCreate: sizeof(tm_adm) 3351072 (16672)
DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1076)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 04D70040, size: 3951144)
DpShMCreate: allocated sys_adm at 04D70040
DpShMCreate: allocated wp_adm at 04D71978
DpShMCreate: allocated tm_adm_list at 04D73188
DpShMCreate: allocated tm_adm at 04D731B8
DpShMCreate: allocated wp_ca_adm at 050A53D8
DpShMCreate: allocated appc_ca_adm at 050A5888
DpShMCreate: allocated comm_adm at 050A5D38
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 05126BE8
DpShMCreate: allocated gw_adm at 05126C28
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05126C58
DpShMCreate: allocated wall_adm at 05126C60
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
MM diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
Sat Feb 10 10:52:42 2007
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( ncfp) [dpxxdisp.c 11163]
CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off.
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 23
Release check o.K.
Sat Feb 10 10:53:22 2007
ERROR => W0 (pid 2428) died [dpxxdisp.c 13743]
ERROR => W1 (pid 3604) died [dpxxdisp.c 13743]
ERROR => W2 (pid 3616) died [dpxxdisp.c 13743]
my types changed after wp death/restart 0x9f --> 0x9e
ERROR => W3 (pid 3624) died [dpxxdisp.c 13743]
my types changed after wp death/restart 0x9e --> 0x9c
ERROR => W4 (pid 3628) died [dpxxdisp.c 13743]
my types changed after wp death/restart 0x9c --> 0x98
ERROR => W5 (pid 1756) died [dpxxdisp.c 13743]
my types changed after wp death/restart 0x98 --> 0x90
ERROR => W6 (pid 3640) died [dpxxdisp.c 13743]
my types changed after wp death/restart 0x90 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-2428 (SIGUSR2)
ERROR => DpWpKill(2428, SIGUSR2) failed [dpxxtool.c 2656]
killing W1-3604 (SIGUSR2)
ERROR => DpWpKill(3604, SIGUSR2) failed [dpxxtool.c 2656]
killing W2-3616 (SIGUSR2)
ERROR => DpWpKill(3616, SIGUSR2) failed [dpxxtool.c 2656]
killing W3-3624 (SIGUSR2)
ERROR => DpWpKill(3624, SIGUSR2) failed [dpxxtool.c 2656]
killing W4-3628 (SIGUSR2)
ERROR => DpWpKill(3628, SIGUSR2) failed [dpxxtool.c 2656]
killing W5-1756 (SIGUSR2)
ERROR => DpWpKill(1756, SIGUSR2) failed [dpxxtool.c 2656]
killing W6-3640 (SIGUSR2)
ERROR => DpWpKill(3640, SIGUSR2) failed [dpxxtool.c 2656]
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Feb 10 10:53:32 2007
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Sat Feb 10 01:53:32 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2428 Ended no 1 0 0
1 DIA 3604 Ended no 1 0 0
2 DIA 3616 Ended no 1 0 0
3 UPD 3624 Ended no 1 0 0
4 ENQ 3628 Ended no 1 0 0
5 BTC 1756 Ended no 1 0 0
6 SPO 3640 Ended no 1 0 0
Dispatcher Queue Statistics Sat Feb 10 01:53:32 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
4
4
2000
4
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 11
wake_evt_udp_now 0
wake events total 7, udp 6 ( 85%), shm 1 ( 14%)
since last update total 7, udp 6 ( 85%), shm 1 ( 14%)
Dump of tm_adm structure: Sat Feb 10 01:53:32 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Sat Feb 10 01:53:32 2007
=============================
Slots: 20, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Feb 10 10:53:37 2007
NiISelect: TIMEOUT occured (5000ms)
Shutdown server ...
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (3484) (SOFT_KILL)
Stop icman
killing process (3548) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:3484 HANDLE:1628)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Feb 10 10:53:38 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:3484 HANDLE:1628)
wait for end of icman
[DpProcDied] Process lives (PID:3548 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Feb 10 10:53:39 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3548 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Feb 10 10:53:40 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3548 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Feb 10 10:53:41 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3548 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Feb 10 10:53:42 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3548 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Feb 10 10:53:43 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3548 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Feb 10 10:53:44 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3548 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Feb 10 10:53:45 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3548 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Feb 10 10:53:46 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3548 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Feb 10 10:53:47 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3548 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Feb 10 10:53:48 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3548 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Feb 10 10:53:49 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:3548 HANDLE:1644)
NiIMyHostName: hostname = 'ncfp'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11447]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1588 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1588 (pos=2)
SiSelNRemove: removed sock 1588
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/20/7
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 14)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1588
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2368) [dpxxdisp.c 9836]
Good Bye .....
Thanks a lot..
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Sat Feb 10 10:52:42 2007
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' ...
B Library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' loaded
B Version of 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' is "700.08", patchlevel (0.19)
B New connection 0 created
M sysno 00
M sid NSP
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 23
M intno 20050900
M make: multithreaded, ASCII
M pid 2428
M
M kernel runs with dp version 202(ext=109) (@(#) DPLIB-INT-VERSION-202)
M length of sys_adm_ext is 360 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2428) [dpxxdisp.c 1288]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 6160 (880)
M DpShMCreate: sizeof(tm_adm) 3351072 (16672)
M DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
M DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
M DpShMCreate: sizeof(comm_adm) 528048 (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1076)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 04D70040, size: 3951144)
M DpShMCreate: allocated sys_adm at 04D70040
M DpShMCreate: allocated wp_adm at 04D71978
M DpShMCreate: allocated tm_adm_list at 04D73188
M DpShMCreate: allocated tm_adm at 04D731B8
M DpShMCreate: allocated wp_ca_adm at 050A53D8
M DpShMCreate: allocated appc_ca_adm at 050A5888
M DpShMCreate: allocated comm_adm at 050A5D38
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 05126BE8
M DpShMCreate: allocated gw_adm at 05126C28
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 05126C58
M DpShMCreate: allocated wall_adm at 05126C60
X EmInit: MmSetImplementation( 2 ).
X MM diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host ncfp
M
M Sat Feb 10 10:52:43 2007
M calling db_connect ...
C
C DBSDBSLIB : version 700.08, patch 0.019 (Make PL 0.23)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.019) UPDSTAT optimized (note 870327)
C (0.010) MaxDB DBSL patch collection 1 2005 (note 850830)
C (0.009) New stream compression available with LVC 7.6.0 b12 (note 835809)
C (0.008) Support of SDBUPDEXCL (note 847616)
C (0.005) Switch stream compression on/off (note 835809)
C (0.005) ITAB stream handling optimized (note 835809)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC SDK Version : SQLDBC.H 7.6.0 BUILD 002-121-083-965
C SQLDBC Library Version : libSQLDBC 7.6.0 BUILD 018-123-113-357
C SQLDBC client runtime is MaxDB 7.6.0.018 CL 113357
C INFO : SQLOPT= -I 0 -t 0
C Try to connect (DEFAULT) on connection 0 ...
C *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:database not running))
[dbsdbsql.cpp 118]
B ***LOG BV3=> severe db error -10709 ; work process is stopped [dbsh#1 @ 1195] [dbsh 1195 ]
B ***LOG BY2=> sql error -10709 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> Connection failed (RTE:database not running) [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1391]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 9995]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = V-1
M
M *****************************************************************************
M *
M * LOCATION SAP-Server ncfp_NSP_00 on host ncfp (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Sat Feb 10 10:52:43 2007
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10180
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2428) [dpnttool.c 327]
Similar Messages
-
After first installation iweb will not start
After first installation iweb will not start Problem message pops up:
Die Datei „/Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Butterfly.mailstationery“ kann nicht geöffnet werden.(can not open file butterfly.mailstationary)
any tips?
ThanksIf you are trying to launch iWeb '09 with a domain file made in iWeb '08, drag the domain file out of Home Folder/Library/Application Support/iWeb into a new folder and then try launching.
-
Dispatcher Not Started in Upgrading to ECC 6.0
We are upgrading the system to 4.7 to ECC 6.0 while upgrading the system ,
1)We are taking back up of old prod Server (system copy) in New Dev Server.
2) hardware Configurations of New Dev Server is OS Windows Server 2003 ,32 .bit SQL 2000.
3)we are Upgrading the system to ECC 6.0 in New Dev Server. With the same hardware Configuration which I have Written in Point no2.
4we have format the server and install OS win server 2008 with 64 Bit.18 GB Ram Support.SQL 2005.
4when Format the Server ,and Copy the Data through Attach and Detach in New Dev Server,there was some Error displayed when reebot the server Dispatcher Stops.
5)Dispatcher Not Started.
Regards
Ritesh sharma
ABAP ConsultantHi Ritesh,
Please check with Basis team on this.
Take the backup of production and physical copy of datafiles and transaction log file.
Now build the new system by system copy (detach/attach).(The platform should be same as production.)
Now you upgrade to your o/s to 2008 64 bit on the development server.Upgrade the mssql 32 bit to mssql2005 64 bit.Then convert the sap to 64 bit and then perform the upgrade to ecc6.
Format will not work.A basis person onsite will help.
Regards
Ashok Dalai -
after update.. i can not start the ipad, when i press agree in the terms ...it will freeze and the screen not working///help please
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
After removing illustrator (it was not starting) i can no longer download it again via CC
after removing illustrator (it was not starting) i can no longer download it again via CC
How much space is there according to airport utility?
TM can be fussy.. Do a factory reset of the TC and give it a new name. Use short, no space and pure alphanumeric type names..
And reset TM. See A4 here. http://pondini.org/TM/Troubleshooting.html
Then set up TM again to the TC and see if TM will start .. the reset will not hurt the backup and TM can still find it on a renamed TC. -
My one month old macbool pro shut down unexpectedly and is not starting up the magsafe led is faint orange and flickering what to do now???will I be charged by apple istore ??? I'm very panicked please reply
Welcome to Apple Support Communities
It seems like your logic board is damaged. As your computer is in warranty, you will get your MacBook repaired for free if you take it to an Apple Store or reseller. Furthermore, you may receive a new MacBook -
Dispatcher not started after client import
hi all,
here i imported one client and the client import process is running but in that system we have other clients my question is users are unable to log in into that other clients
so i checked into os leve (dpmon) and after i try to stopsap and its stoped and after it is not started the error message is shown as
oscollector is already running,, and
trying to start sid database .....
log file :/ /home / sidadm / startdb.log
please what can i do for my server starthi srineevas elow are shown my usr/sap/sid/sys/exe/run/startdb
#!/bin/sh
@(#) $Id: //bc/700-1_REL/src/ins/SAPINST/impl/tpls/ind/ind/startdbora#4 $
NAME: startdb
PURPOSE: startup an ORACLE database
PARAMETER:
none
Environment
ORACLE_HOME must be set
ORACLE_SID must be set
Return Codes:
0 ok. DB may have already been running.
1 erroneous license check
2 DB not startable: inconsistency?
3 environment check failed
4 orasrv error / starting of listener error
5 script was killed
USAGE: startdb [ORACLE_HOME] [startRemoteService]
DESCRIPTION:
- initialize
- start orasrv / now: lsnrctl start
- check database state (connect)
- startup database, change archivelog mode
if this procedure is changed (e.g. Test System)
there is no guarantee of hotline support if the system crashes
- check database state (connect)
- check archive log state
- licence check
DGUX and Sequent exceptions
R3trans is not available on the DG standalone DB server
therefore the Oracle processes are checked
#History
#2001-03-01 rv replace SAPSYSTEMNAME with DB_SID where appropriate, due to SDMS
#2000-11-14 rv include begin/end messages from startsap
#1996-07-25 kgd SQLNETV2 and SQLNETV1
#1996-07-11 ar Sequent exceptions
#1996-06-11 kgd SQLNET*V2 adaptions
#1994-12-7 mau warning "Transport system not init." not only to
logfile but also to stdout
Project: 22C 241
#1995-07-25 dg included check that caller is admuser
#====================================================================
FUNCTION: check_db_running
PURPOSE: check wheather db is runnig without R3trans
set returncode = 0 db available
returncode != 0 db error
check_db_running()
in order to find out if the database is available
check whether the Oracle processes are running or not
echo "
" >> $LOG
echo `date` >> $LOG
echo "check if Oracle processes are running" >> $LOG
$PS | grep ora_[a-z][a-z][a-z][a-z]_${ORACLE_SID} > /dev/null 2>&1
if test $? -eq 0
then
echo 'Database already running' >> $LOG
returncode=0;
else
echo 'database not available' >> $LOG
now check if sgadef exists
if a database connect fails but sgadef exists,
it is possible that there is a severe database problem
otherwise continue with startup procedure
if test -f $ORACLE_HOME/dbs/sgadef$.dbf -o \
-f $ORACLE_HOME/dbs/sgadef$.ora
then
echo "*** ERROR:Database possibly left running when system" >> $LOG
echo " went down(system crash?)." >> $LOG
echo " Notify Database Administrator." >> $LOG
returncode=$error_dbnotavail
else
echo 'There are no Oracle processes running - ' >> $LOG
echo 'Database is probably already stopped.' >> $LOG
returncode=$error_dbnotavail
fi
fi -
SAP R/3 Installation : Dispatcher not starting up.
Hi,
I'm trying to Install SAP R/3 Enterprise ABAP on Windows: Oracle. Central Instance, Database Instance & Gateway Instance Installation went smoothly without any problems.
But when I tried to start the SAP system the Dispatcher is not starting.
I'm getting following error which is listed below from various files like dev_wx, dev_ms, stderrx & dev_rfc.
<u><b>dev_rfc.trc file</b></u>
>TS> Fri Jun 03 14:02:41 2005
T:5268 ======> Connect to SAP gateway failed
Connect_PM TPNAME=IGS.C01, GWHOST=wipro, GWSERV=3300
ERROR partner not reached (host 10.119.2.66, service 3300)
TIME Fri Jun 03 14:02:41 2005
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -10
MODULE nixxi_r.cpp
LINE 8593
DETAIL NiPConnect2
SYSTEM CALL SiPeekPendConn
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 2
<u><b>dev_ms file</b></u>
[Thr 5884] Fri Jun 03 17:51:27 2005
[Thr 5884] systemid 560 (PC with Windows NT)
[Thr 5884] relno 6400
[Thr 5884] patchlevel 0
[Thr 5884] patchno 12
[Thr 5884] intno 20020600
[Thr 5884] pid 5816
[Thr 5884] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 5816) [msxxserv.c 1655]
[Thr 5884] MsHttpInit: full qualified hostname = wipro.hobbits
[Thr 5884] HTTP logging is switch off
[Thr 5884] set HTTP state to LISTEN
[Thr 5884] MsHttpOwnDomain: own domain[1] = hobbits
[Thr 5884] *** I listen to port sapmsC01 (3601) ***
[Thr 5884] *** HTTP port 8101 state LISTEN ***
[Thr 5884] CUSTOMER KEY: >P1811225457<
[Thr 5884] Fri Jun 03 17:51:47 2005
[Thr 5884] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from wipro_C01_00 [msxxserv.c 4190]
[Thr 5884] Fri Jun 03 17:52:44 2005
[Thr 5884] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from wipro_C01_01 [msxxserv.c 4190]
[Thr 5884] Fri Jun 03 17:52:49 2005
[Thr 5884] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from wipro_C01_00 [msxxserv.c 4190]
[Thr 5884] ***LOG Q0I=> NiPRead: recv (10054: WSAECONNRESET: Connection reset by peer) [ninti.c 777]
[Thr 5884] *** ERROR => MsSRead: NiBufReceive (rc=NIECONN_BROKEN) [msxxserv.c 9101]
[Thr 5884] *** ERROR => MsSClientHandle: MsSRead C2 (wipro_C01_00), MSEINTERN [msxxserv.c 3765]
[Thr 5884] Fri Jun 03 18:03:09 2005
[Thr 5884] *** ERROR => MsSCheckConnections: no response from client C1 (10.119.2.66) after 300 secs received [msxxserv.c 2913]
[Thr 5884] *** ERROR => MsSCheckConnections: disconnect now [10.119.2.66] [msxxserv.c 2917]
[Thr 5884] *** ERROR => MsSCheckConnections: no response from client C0 (10.119.2.66) after 300 secs received [msxxserv.c 2913]
[Thr 5884] *** ERROR => MsSCheckConnections: disconnect now [10.119.2.66] [msxxserv.c 2917]
<u><b>stderr file</b></u>
<u><b>stderr2 file</b></u>
C:\usr\sap\C01\D00\work>echo WHENEVER SQLERROR exit SQL.SQLCODE 1>v9start.sql
C:\usr\sap\C01\D00\work>echo connect / as sysdba 1>>v9start.sql
C:\usr\sap\C01\D00\work>echo startup 1>>v9start.sql
C:\usr\sap\C01\D00\work>echo exit 1>>v9start.sql
SQL*Plus: Release 9.2.0.5.0 - Production on Fri Jun 3 17:51:27 2005
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected.
ORA-01081: cannot start already-running ORACLE - shut it down first
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.5.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.5.0 - Production
<u><b>stderr4</b></u>
work process W0 died => tskh_init: db_connect
work process W3 died => tskh_init: db_connect
work process W4 died => tskh_init: db_connect
work process W5 died => tskh_init: db_connect
work process W6 died => tskh_init: db_connect
work process W7 died => tskh_init: db_connect
work process W2 died => tskh_init: db_connect
work process W1 died => tskh_init: db_connect
ICM up and operational (pid: 4100) ***
Shutdown ICM server ......
ICM shutdown completed (pid: 4100) ***
DISPATCHER EMERGENCY SHUTDOWN => DpWPCheck: no more work processes
<u><b>stderr6</b></u>
[Thr 3668] Fri Jun 03 17:51:27 2005
[Thr 3668] *** ERROR => SncPDLInit(): DlLoadLib("sncgss32.dll")=DLENOACCESS
[sncxxdl.0340][Thr 3668] *** ERROR => SncPDLInit()==SNCERR_INIT, Adapter (#0) sncgss32.dll not loaded
[sncxxdl.0604][Thr 4144] Fri Jun 03 17:51:28 2005
[Thr 4144] *** ERROR => SncPDLInit(): DlLoadLib("sncgss32.dll")=DLENOACCESS
[sncxxdl.0340][Thr 4144] *** ERROR => SncPDLInit()==SNCERR_INIT, Adapter (#0) sncgss32.dll not loaded
[sncxxdl.0604][Thr 3680] Fri Jun 03 17:51:28 2005
[Thr 3680] *** ERROR => SncPDLInit(): DlLoadLib("sncgss32.dll")=DLENOACCESS
[sncxxdl.0340][Thr 3680] *** ERROR => SncPDLInit()==SNCERR_INIT, Adapter (#0) sncgss32.dll not loaded
[sncxxdl.0604]
From the above log, it says that there is problem in database connection. But I am not able to figure out where the problem lies & what are the changes that needs to be done.
Kindly suggest me what needs to be done.
Cheers,
JeetuHi Jeetendra
I have the same problem of dsipatcher not starting up, i am using XP as operating system , pinning hope that u have got the solutions for the problem
Here are the below
1)dev_wo
trc file: "dev_w0", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Wed Oct 19 09:23:41 2005
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\PRD\SYS\exe\run\dboraslib.dll' ...
M
M Wed Oct 19 09:23:42 2005
M *** ERROR => DlLoadLib: LoadLibrary(C:\usr\sap\PRD\SYS\exe\run\dboraslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library 'C:\usr\sap\PRD\SYS\exe\run\dboraslib.dll'
[dbcon.c 3789]
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 251
M intno 20020600
M pid 3660
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3660) [dpxxdisp.c 1016]
I
I Wed Oct 19 09:23:43 2005
I MtxInit: -2 0 0
X
X Wed Oct 19 09:23:44 2005
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M
M Wed Oct 19 09:23:50 2005
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\PRD\SYS\exe\run\dboraslib.dll' ...
M
M Wed Oct 19 09:23:55 2005
M *** ERROR => DlLoadLib: LoadLibrary(C:\usr\sap\PRD\SYS\exe\run\dboraslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library 'C:\usr\sap\PRD\SYS\exe\run\dboraslib.dll'
[dbcon.c 3789]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 008192) [thxxhead.c 1098]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8277]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server sap_PRD_00 on host sap (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Wed Oct 19 09:23:55 2005
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 8408
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 235]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3660) [dpnttool.c 345]
2)stder
C:\usr\sap\PRD\DVEBMGS00\work>echo WHENEVER SQLERROR exit SQL.SQLCODE 1>v9start.sql
C:\usr\sap\PRD\DVEBMGS00\work>echo connect / as sysdba 1>>v9start.sql
C:\usr\sap\PRD\DVEBMGS00\work>echo startup 1>>v9start.sql
C:\usr\sap\PRD\DVEBMGS00\work>echo exit 1>>v9start.sql
'sqlplus' is not recognized as an internal or external command,
operable program or batch file.
3)dev_rfc
ERROR file opened at 20060207 010848 India Standard , SAP-REL 620,0,252 RFC-VER 3 500897 MT-SL
T:2608 Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1360
T:2608 <* RfcDispatch [1] : returns 1:RFC_FAILURE
4)dev_ms
trc file: "dev_ms", trc level: 1, release: "620"
[Thr 2316] Wed Oct 19 09:23:36 2005
[Thr 2316] MsSSetTrcLog: trc logging not active
[Thr 2316] relno 6200
[Thr 2316] patchlevel 0
[Thr 2316] patchno 125
[Thr 2316] intno 20020600
[Thr 2316] pid 2328
[Thr 2316] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2328) [msxxserv.c 1515]
[Thr 2316] MsHttpPortInsert: set HTTP state to LISTEN
[Thr 2316] *** I listen to port sapmsPRD (3600) ***
[Thr 2316] *** HTTP LISTEN ***
[Thr 2316] *** I listen to HTTP port 8100 ***
[Thr 2316] CUSTOMER KEY: >B0642345523<
[Thr 2316] Wed Oct 19 09:24:27 2005
[Thr 2316] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from sap_PRD_00 [msxxserv.c 3957]
[Thr 2492] Wed Oct 19 09:27:02 2005
[Thr 2492] MsSExit: received SIGINT (2)
[Thr 2492] ***LOG Q02=> MsSHalt, MSStop (Msg Server 2328) [msxxserv.c 4786]
5) dev_disp
trc file: "dev_disp", trc level: 1, release: "620"
Wed Oct 19 09:23:38 2005
ERROR => DlLoadLib: LoadLibrary(dboraslib.dll) Error 126 [dlnt.c 226]
Error 126 = "The specified module could not be found."
systemid 560 (PC with Windows NT)
relno 6200
patchlevel 0
patchno 251
intno 20020600
pid 2120
***LOG Q00=> DpSapEnvInit, DPStart (00 2120) [dpxxdisp.c 966]
shared lib "dw_xml.dll" version 252 successfully loaded
shared lib "dw_xtc.dll" version 252 successfully loaded
shared lib "dw_stl.dll" version 252 successfully loaded
MtxInit: -2 0 0
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 268 MB
<ES> 267 blocks reserved for free list.
ES initialized.
Wed Oct 19 09:23:39 2005
***LOG Q0K=> DpMsAttach, mscon ( sap) [dpxxdisp.c 8832]
Wed Oct 19 09:23:40 2005
CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
Wed Oct 19 09:23:42 2005
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6200, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 940]
DpMsgAdmin: Set patchno for this platform to 251
Release check o.K.
Wed Oct 19 09:24:21 2005
ERROR => W0 (pid 3660) died [dpxxdisp.c 11210]
ERROR => W1 (pid 3728) died [dpxxdisp.c 11210]
ERROR => W2 (pid 3716) died [dpxxdisp.c 11210]
ERROR => W3 (pid 4048) died [dpxxdisp.c 11210]
ERROR => W4 (pid 3704) died [dpxxdisp.c 11210]
ERROR => W5 (pid 3700) died [dpxxdisp.c 11210]
ERROR => W6 (pid 3684) died [dpxxdisp.c 11210]
ERROR => W7 (pid 3692) died [dpxxdisp.c 11210]
ERROR => W8 (pid 3896) died [dpxxdisp.c 11210]
ERROR => W9 (pid 3672) died [dpxxdisp.c 11210]
ERROR => W10 (pid 2620) died [dpxxdisp.c 11210]
ERROR => W11 (pid 3628) died [dpxxdisp.c 11210]
ERROR => W12 (pid 3620) died [dpxxdisp.c 11210]
ERROR => W13 (pid 3580) died [dpxxdisp.c 11210]
ERROR => W14 (pid 3612) died [dpxxdisp.c 11210]
ERROR => W15 (pid 380) died [dpxxdisp.c 11210]
ERROR => W16 (pid 3624) died [dpxxdisp.c 11210]
my types changed after wp death/restart 0xbf --> 0x80
DP_FATAL_ERROR => DpEnvCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
ERROR => DpMBufRead: state MBUF_PREPARED, opmode MBUF_USE [dpxxmbuf.c 503]
ERROR => DpModState: DpMBufRead failed (-1) [dpxxdisp.c 13129]
Wed Oct 19 09:24:27 2005
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9058]
MBUF state OFF
MBUF component DOWN
Wed Oct 19 09:24:28 2005
***LOG Q05=> DpHalt, DPStop ( 2120) [dpxxdisp.c 7637]
kindly help me to solve and able to connect to server
and please let me know step by step solutions as i am very much new
Thanking you my emial id ([email protected]) -
Dispatcher not starting up ::Shared library version mismatch
Hi,
System is SAP ECC 6.0, AIX and Oracle 10g.
We upgraded the Kernel Level from 201 to Level 221.
<hostname>/root$ su - <sid>adm
[YOU HAVE NEW MAIL]
.profile[30]: 1: not found.
<hostname>:sidadm> disp+work
disp+work information
kernel release 700
kernel make variant 700_REL
compiled on AIX 2 5 005DD9CD4C00
compiled for 64 BIT
compilation mode UNICODE
compile time Aug 23 2009 20:51:38
update level 0
patch number 221
source id 0.221
supported environment
database (SAP, table SVERS) 700
operating system
AIX 1 5
AIX 2 5
AIX 3 5
After upgrading the kernel dispatcher is not starting. Kindly find the below error:
sysno 10
sid SID
systemid 324 (IBM RS/6000 with AIX)
relno 7000
patchlevel 0
patchno 221
intno 20050900
make: single threaded, Unicode, 64 bit, optimized
pid 778402
Wed Nov 25 12:20:08 2009
kernel runs with dp version 243000(ext=110000) (@(#) DPLIB-INT-VERSION-243000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (10 778402) [dpxxdisp.c 1287]
DwSLCheckVersion: shared library version mismatch:
shared lib "dw_xml.so" version 201 <-> kernel version 221
shared lib "dw_xtc.so" version 201 <-> kernel version 221
shared lib "dw_stl.so" version 201 <-> kernel version 221
shared lib "dw_gui.so" version 201 <-> kernel version 221
shared lib "dw_mdm.so" version 201 <-> kernel version 221
DP_FATAL_ERROR => Version mismatch of dw shared libraries detected. See dev_disp trace for details.
Set environment variable SAP_NO_SLIB_CHECK=1 to disable version checking.
DISPATCHER EMERGENCY SHUTDOWN ***
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 25 12:20:13 2009
NiISelect: TIMEOUT occured (5000ms)
ERROR => DpHalt: my PID is not the dispatcher's (778402/0) [dpxxdisp.c 10510]
Kindly look into the issue. Looking forward for your reply.
Thanks,
SoumyaSoumya Saha wrote:
ERROR => DpHalt: my PID is not the dispatcher's (778402/0) http://dpxxdisp.c 10510
The system appears to think that the dispatcher process may already be running. Stop all the SAP processes and run cleanipc to clear out the shared memory. I've seen this on AIX before where the shared memory will prevent SAP from starting back up and clearing these resolved the issue.
Hope that is helpful.
J. Haynes -
Work processes died and dispatcher not starting
Any idea on the following error causing dispatcher not to start?
The following excerpt is taken from the trace log.
Any clue would be very helpful. Thanks.
Mon Mar 03 11:44:02 2008
CCMS: start to initalize 3.X shared alert area (first segment).
ERROR => DpHdlDeadWp: W0 (pid 1452) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W1 (pid 528) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W2 (pid 3532) died [dpxxdisp.c 14507]
Mon Mar 03 11:44:03 2008
ERROR => DpHdlDeadWp: W3 (pid 3956) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W4 (pid 3056) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W5 (pid 2104) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W6 (pid 568) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W7 (pid 3820) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W8 (pid 3092) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W9 (pid 2568) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => DpHdlDeadWp: W10 (pid 2812) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => DpHdlDeadWp: W11 (pid 3304) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => DpHdlDeadWp: W12 (pid 3208) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W13 (pid 2316) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W14 (pid 3644) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => DpHdlDeadWp: W15 (pid 3896) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => DpHdlDeadWp: W16 (pid 2756) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***Hi,
Upon restarting the host system I found the application server to be running normal.
I am not sure if there were any pending configuration requiring the host system to be restarted and causing the dispatcher not to become operational.
Thanks a lot for your response though.
If I get the error again, I would surely paste both the logs here in my question.
Best Regards,
OI -
Hi!
please help me....
i have installed SAP NW 2004s ABAP Trial SP11 completely without any error,,
but my Dispatcher(disp+work.exe) is not starting ,, only Message server is starting
initially it gives me a error message ' Running but message server unreachable' in status in process list in SAPMMC
and after the error message it stops,,hi..
i am getting a similiar erro
this is my sap mmc developer trace
===============
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 2316] Wed Jun 06 19:40:33 2007
[Thr 2316] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 79
intno 20050900
make: multithreaded, ASCII, 64 bit, optimized
pid 2500
[Thr 2316] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2500) [msxxserv.c 1824]
[Thr 2316] ***LOG Q0I=> NiPGetServByName2: service 'sapmsDEV' not found: getservbyname_r [ninti.c 530]
[Thr 2316] *** ERROR => MsSCommInit: NiBufListen(sapmsDEV) (rc=NIESERV_UNKNOWN) [msxxserv.c 10118]
[Thr 2316] *** ERROR => MsSInit: MsSCommInit [msxxserv.c 1857]
[Thr 2316] *** ERROR => main: MsSInit [msxxserv.c 5890]
[Thr 2316] ***LOG Q02=> MsSHalt, MSStop (Msg Server 2500) [msxxserv.c 5938]
============
i checked the services file..
the entry there is correct as per sap note
===============
db2c_DB2 50000/tcp
db2c_DB2CTLSV 50001/tcp
sapmsDEV 3605/tcp # SAP System Messaging Service Port
sapdp00 3200/tcp
sapdp01 3201/tcp
sapdp02 3202/tcp
sapdp03 3203/tcp
sapdp04 3204/tcp
sapdp05 3205/tcp
sapdp06 3206/tcp
sapdp07 3207/tcp
sapdp08 3208/tcp
sapdp09 3209/tcp
sapdp10 3210/tcp
sapdp11 3211/tcp
sapdp12 3212/tcp
and so on till
sapmsSOL 3600/tcp # SAP System Messaging Service Port
sapdb2DEV 6001/tcp # SAP DB2 Communication Port
-==
any help much appreciatedc
badly stuck
need to up server anyhow by tommrow
full points guranteed -
Dispatcher not starting, inconsistencies with database.
Hi guys,
In my coy a member of staff shutdown the SAP Server abnormally causing inconsistencies in the database. The SAP system runs on an MSSQL database.
The next morning the dispatcher was not starting and i checked the database. Apparently, i could not login to the database so i changed the default database to master. I could login alright so i tried running the ALTER LOGIN.... which did not run.
Drilling down i found out that the database was marked "SUSPECT" so i tried to take it offline and detach it. I got the error "attempt to retrieve data for object failed for server".
I would appreciate your prompt response on this.
Regards
Basisman.you may also want to check:
[http://deepakrangarajan.blogspot.com/2007/08/how-to-recover-from-suspect-database.html]
http://www.sqlservercentral.com/Forums/Topic399609-266-1.aspx -
After Upgrade, Windows Service will not start automaticly
I just upgraded from 10.2 to 10.4. When I did the Windows File Service, will not start automaticly. I can start it manually, after a reboot. Any idea on how to fix this?
I am having the same problem on a clean install of Server 10.4.10, AFP & Web starts automatically on restart, but not Windows Service. This is the first time I have run into this, it starts fine on all other servers I administer. Then entry in /etc/hostconfig for SMBSERVER is set to "-YES-", there is no errors or messages of any kind in the console or system log, it just won't start.
This complicated with the problem I am having on the same server where I cannot connect via ARD after reboot without someone there physically plugging a monitor into the video port first (another open post I have - http://discussions.apple.com/message.jspa?messageID=5850246#5850246 ). So, doing maintenance at off-hours is almost unworkable. -
J2EE engine Dispatcher not starting
I installed Developer Workplace 2004s SR2 (Java) on MS SQL server, in Windows XP Professional. It worked fine and I was able to start the engine. When I patched it to SP10 , dispatcher is not starting and it is greyed out. All the log files has no errors reported except one file which has an error message logged in work/jvm_dispatcher.log. Here is the message:
Error - ID:000000. Error in loading com.sap.engine.core.Framework class. Class not found.
Any ClueAre all SCA needed for SP10 deployed successfully?
I think some sca files were not properly deployed... -
Hi All,
The SAP IPC dispatcher and the SAP IPC Server are not starting. Message: "Couldn't start the SAP IPC Dispatcher service on local computer. The service didn't return an error. This could be an internal windows error or an internal service error. "
Environment:
1. Windows 2000 Server Service Pack 4.
2. SAP:IPC:4.0 SP06
Here are contents of properties file
rfcEnabled=true
rfcDispatcherProgId=IPC_RFC_DISPATCHER
rfcServerCount=1
rfcServerProgIdPrefix=IPC_RFC_SERVER_
I searched OSS notes and this forum, but didn't have good luck.
Looking forward to your help.
CRM InstallerDid you try note 842950?
Regards,
Kaushal
Maybe you are looking for
-
I have a simple inventory query where the user can input a search term, and a price span in 2 text boxes, named p1 and p2, the search box is named s. When I just change the price boxes and submit, it works perfectly, but if I put anything in the sear
-
Hi, I would like to know if there is a possibility to delay an asynchronous update to the database? What I mean by that? I have changed or created some data in the UI, in my case in the CRM application, and than when saving, I am triggering the COMMI
-
Hi all, What is the difference between WebDynpro iView and URL iView pointing to a WebDynpro application? any advantages? disadvantages? Aviad
-
Importing site created with other software
Hi, I Anyone knows if Dreamweaver can import a site or pages created with other editors, particular with Yahoo SiteBuilder, and if it can, does it have an option of converting html code into whatever coding it uses? I have site site coded with free Y
-
Loading JSON from InDesign javascript
I would like to load and eval a file containing JSON. Can that be done from InDesign scripting?