After an update, Firefox is now unable to establish a connection with server.
After an update, attempting to use Firefox results in the following error:
Unable to connect
Firefox can't establish a connection to the server at en-us.start3.mozilla.com.
This error message appeared after uninstalling and re-installing Mozilla Firefox. Initially the the connection couldn't be made at google.com
Firefox will not open at all now.
In SQL server you can configure it how to communicate with clients (Shared Memory, Named Pipes, TCP/IP).
When the application is on the same computer with SQL server Local Named Pipes or Shared Memory are used.
When is on other computer TCP/IP or Named Pipes are used to communicate with the server.
Check these options and enable the appropriate.
Similar Messages
-
ERROR http: 5: Unable to initialize ssl connection with server, aborting co
HI EXPERTS,
one of my database give me below error when i start its dbconsole. and after failure it give me meassge
TZ set to Asia/Karachi
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
https://test:5500/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ..............................................................
........ failed.
Logs are generated in directory /u01/oracle/product/10.2/cnichol_cpuplt/sysman/log
and in trace file name "emdctl.trc" below error is logged.
ERROR http: 5: Unable to initialize ssl connection with server, aborting connection attempt
ERROR ssl: nzos_Handshake failed, ret=29024
and trace file named "emagent.trc" give below error
2010-10-04 19:12:25 Thread-88238992 ERROR http: 11: Unable to initialize ssl connection with server, aborting connection attempt
2010-10-04 19:12:25 Thread-88238992 ERROR pingManager: nmepm_pingReposURL: Cannot connect to https://test:5500/em/upload/: retStatus=-1
2010-10-04 19:12:38 Thread-88238992 ERROR upload: Error in uploadXMLFiles. Trying again in 300.00 seconds.
dbconosle URL is
https://test:5500/em/console/aboutApplication
Operating system is Redhat linux AS 5.3
what is the possible cause of this failure any one can guide me.
thanx in Advance
regards,
Edited by: AMIABU on Oct 4, 2010 7:28 AMoracle@bcm-laptop:~$ emctl
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Oracle Enterprise Manager 10g Database Control commands:
emctl start | stop dbconsole
emctl status | secure | setpasswd dbconsole
emctl config dbconsole -heap_size <size_value> -max_perm_size <size_value>
emctl status agent
emctl status agent -secure [-omsurl <http://<oms-hostname>:<oms-unsecure-port>/em/*>]
emctl getversion
emctl reload | upload | clearstate | getversion agent
emctl reload agent dynamicproperties [<Target_name>:<Target_Type>]....
emctl config agent <options>
emctl config agent updateTZ
emctl config agent getTZ
emctl resetTZ agent
emctl config agent credentials [<Target_name>[:<Target_Type>]]
emctl gensudoprops
emctl clearsudoprops
Blackout Usage :
emctl start blackout <Blackoutname> [-nodeLevel] [<Target_name>[:<Target_Type>]].... [-d <Duration>]
emctl stop blackout <Blackoutname>
emctl status blackout [<Target_name>[:<Target_Type>]]....
The following are valid options for blackouts
<Target_name:Target_type> defaults to local node target if not specified.
If -nodeLevel is specified after <Blackoutname>,the blackout will be applied to all targets and any target list that follows will be ignored.
Duration is specified in [days] hh:mm
emctl getemhome
emctl ilint
Em Key Commands Usage :
emctl config emkey -emkeyfile <emkey.ora path> [-force] [-sysman_pwd <sysman password>]
emctl config emkey -emkey [-emkeyfile <emkey.ora path>] [-force] [-sysman_pwd <sysman password>]
emctl config emkey -repos [-emkeyfile <emkey.ora path>] [-force] [-sysman_pwd <sysman password>]
emctl config emkey -remove_from_repos [-sysman_pwd <sysman password>]
emctl config emkey -copy_to_repos [-sysman_pwd <sysman password>]
emctl status emkey [-sysman_pwd <sysman password>]
Secure DBConsole Usage :
emctl secure dbconsole -sysman_pwd <sysman password> [-passwd_file <abs file loc>]
[-host <slb hostname>] [-sid <service name>] [-reset] [-secure_port <secure_port>]
[-root_dc <root_dc>] [-root_country <root_country>] [-root_state <root_state>] [-root_loc <root_loc>]
[-root_org <root_org>] [-root_unit <root_unit>] [-root_email <root_email>]
[-wallet <wallet loc>] [-wallet_pwd <wallet pwd>] [-trust_certs_loc <certs loc>]
emctl secure status dbconsole
Register Targettype Usage :
emctl register oms targettype [-o <Output filename>] <XML filename> <rep user> <rep passwd> <rep host> <rep port> <rep sid> OR
emctl register oms targettype [-o <Output filename>] <XML filename> <rep user> <rep passwd> <rep connect descriptor> -
firefox says it can't establish a connection with any website I try. I uninstalled and reinstalled it and get the same message .tryed running it with the addons diabled that didn't work. so I uninstalled it again this time uninstalling all the settings and addons too. reinstalled it and got the same message.
See:
* http://kb.mozillazine.org/Error_loading_websites -
Error - unable to establish JCO connection with SSO
Hello,
I have implemented XSS on WebDP and this is working fine. So my JCO connections SAP_R3_HumanResources must be configured correctly. However I have just done the 'GetFlight' BAPI tutorial and upon execution I get the error:
'com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCException: Could not create JCOClientConnection for logical System: SAP_R3_HumanResources - Model: class com.sap.tut.wd.flightlist.model.FlightModel. Please assure that you have configured the RFC connections and/or logical system name properly for this model!'
CAUSED BY
'User not authenticated (is anonymous) - unable to establish JCO connection with SSO'
Can anyone help here?
Thanks
Mr.THI
GOOD
GO THROUGH THIS LINK WHICH CONTAINS THE A SINGLE SIGN-ON IN A COMPLEX SYSTEM LANDSCAPE.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/80fbc690-0201-0010-1aba-93d5c8232b4a
http://www.sap-press.de/download/dateien/1020/sappress_sap_security_authorizations.pdf
http://sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ff65b5a2-0a01-0010-5b97-e747192a1d49
THANKS
MRUTYUN -
Using Firefox 22, Ghostery auto-updated. It said there was a conflict with the Beef Taco add-on; when I went to disable the add-on, nothing worked properly. Now FF crashes constantly, won't allow me to use tabs properly, and the add-on manager won't finish opening to allow me to make changes to add-ons. How can I remove Ghostery without the manager? (Even this form isn't functioning properly to allow me to add information, sorry.)
Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you. -
Question
I am trying to update Firefox per its suggestion, but haven't been able to connect to server. Keeps saying "connecting to server", but no connection after an hour of trying.Try running the combo update.
10.9.5 Combo Update -
SINCE UPDATING TO YOSEMITE NOW UNABLE TO FIND OLD EMAILS WITH NAME RECOGNITION
Apple Desktop
Since changing over to Yosemite i am now unable to find groups of old emails, if i type in say travelzoo i used to be able to find all the old emails, but since 31st January when we changed to Yosemite now it shows no old emails in a block form Can you help pleaseWhen you type travelzoo into the search field, does it make any token suggestions such as People or Name, or does it provide no search tokens?
If you don't get any, try reindexing Spotlight: Spotlight: How to re-index folders or volumes - Apple Support -
Each time the 'update' icon comes up (for months, now), I click to update. It never goes beyond 'connecting with update server' mode. Have never had this problem with updates to new versions before. This happens every single time the update icon comes up.
If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
* http://kb.mozillazine.org/Profile_folder_-_Firefox -
"Unable to establish a connection between WebEx and the mail server."
Hi,
I installed Cisco WebEx and integrated with our Microsoft exchange server. It showed server "UP". everything's came up and working fine after that and sudenlly i found this message "Unable to establish a connection with the mail server. Please recheck settings."
I went into the Mail Server setup to edit settings and now, it shows Server Down. Do I need to do something on the MS Exchange 2010 or from webex server ??
Any help is greatly appreciated. Thanks a lot!Every 180 seconds, CWMS verifies the connection to the SMTP server by establishing a connection on TCP port 25 (SMTP) and then sending the EHLO command followed by the QUIT command. This check is also performed once when logging into the admin web page or when browsing to System -> Servers (where the status of the mail server is displayed).
If this sequence does not complete successfully, the warning “Unable to establish a connection with the mail server. Please recheck settings.” will show in a banner at the top of the CWMS admin pages.
You can verify the connection to the SMTP server manually by using “telnet 25”.
If you have access to the CWMS unix shell be aware that CWMS does not come with the telnet command installed.
As an alternative, you can use this 3-lines script:
exec 3<>/dev/tcp/x.x.x.x/25
echo -e "EHLO\r\nQUIT\r\n " >&3
cat <&3
Replace x.x.x.x by the ip address or hostname of the SMTP server and save the script in a file, f.e.:
/* script saved in a file named ehlo */
[root@dchriste-cwms-adm1 ~]# cat ./ehlo
exec 3<>/dev/tcp/10.48.54.79/25
echo -e "EHLO\r\nQUIT\r\n " >&3
cat <&3
Then, execute it:
[root@dchriste-cwms-adm1 ~]# sh ./ehlo
The output should be similar to this:
220 *******************************************************************************************************************
250-confukdc.confuk.com Hello [10.48.52.110]
250-TURN
250-SIZE
250-ETRN
250-PIPELINING
250-DSN
250-ENHANCEDSTATUSCODES
250-8bitmime
250-BINARYMIME
250-CHUNKING
250-VRFY
250-XXXXXXXXXXXXXXXXXXXXXXXA
250-X-EXPS=LOGIN
250-AUTH GSSAPI NTLM LOGIN
250-AUTH=LOGIN
250-X-LINK2STATE
250-XEXCH50
250 OK221 2.0.0 confukdc.confuk.com Service closing transmission channel
Also, you can use this tcpdump command to see the conversation (replace x.x.x.x by the SMTP server’s IP address or hostname):
tcpdump -vXs 0 host x.x.x.x and tcp port 25
If you have HA, it is not certain which admin VM talks to the smtp server, so best to check both.
If you don't have access to the CWMS unix shell, best to span the switch ports and run packet capture. -
BEA-149505 -The administration server was unable to establish JMX Connect.
hello
Getting the following error, trying to access the weblogic admin server ( Linux x86-64 RHL50) after a fresh install.
BEA-149505 The administration server was unable to establish JMX Connectivity with the managedServer at the JMX Service URL of <none > URL in the AdminServer LogiI
1. what steps and configuration files do I need to access to add the url
I will like to add that the node manager and the cluster screen were NOT configured during the configuration, since this is NOT an OIM configuration
2. if you have any tips please let me know
r.faisal
thank for your feedback. I added this in my startup script, but I was NOT able to get the web access to work and when I shot it down, there was an error.
Here is the startup script, Please show me when to place the scripts
#!/bin/sh
# WARNING: This file is created by the Configuration Wizard.
# Any changes to this script may be lost when adding extensions to this configuration.
# --- Start Functions ---
stopAll()
# We separate the stop commands into a function so we are able to use the trap command in Unix (calling a function) to stop these services
if [ "X${ALREADY_STOPPED}" != "X" ] ; then
exit
fi
# STOP DERBY (only if we started it)
if [ "${DERBY_FLAG}" = "true" ] ; then
echo "Stopping Derby server..."
${WL_HOME}/common/derby/bin/stopNetworkServer.sh >"${DOMAIN_HOME}/derbyShutdown.log" 2>&1
echo "Derby server stopped."
fi
ALREADY_STOPPED="true"
# --- End Functions ---
# This script is used to start WebLogic Server for this domain.
# To create your own start script for your domain, you can initialize the
# environment by calling @USERDOMAINHOME/setDomainEnv.
# setDomainEnv initializes or calls commEnv to initialize the following variables:
# BEA_HOME - The BEA home directory of your WebLogic installation.
# JAVA_HOME - Location of the version of Java used to start WebLogic
# Server.
# JAVA_VENDOR - Vendor of the JVM (i.e. BEA, HP, IBM, Sun, etc.)
# PATH - JDK and WebLogic directories are added to system path.
# WEBLOGIC_CLASSPATH
# - Classpath needed to start WebLogic Server.
# PATCH_CLASSPATH - Classpath used for patches
# PATCH_LIBPATH - Library path used for patches
# PATCH_PATH - Path used for patches
# WEBLOGIC_EXTENSION_DIRS - Extension dirs for WebLogic classpath patch
"/erasdevapp/weblogic/user_projects/domains/base_domain/bin/startWebLogic
umask 037
# Call setDomainEnv here.
DOMAIN_HOME="/erasdevapp/weblogic/user_projects/domains/base_domain"
. ${DOMAIN_HOME}/bin/setDomainEnv.sh $*
SAVE_JAVA_OPTIONS="${JAVA_OPTIONS}"
SAVE_CLASSPATH="${CLASSPATH}"
# Start Derby
DERBY_DEBUG_LEVEL="0"
if [ "${DERBY_FLAG}" = "true" ] ; then
${WL_HOME}/common/derby/bin/startNetworkServer.sh >"${DOMAIN_HOME}/derby.log" 2>&1
fi
JAVA_OPTIONS="${SAVE_JAVA_OPTIONS}"
SAVE_JAVA_OPTIONS=""
CLASSPATH="${SAVE_CLASSPATH}"
SAVE_CLASSPATH=""
trap 'stopAll' 1 2 3 15
if [ "${PRODUCTION_MODE}" = "true" ] ; then
WLS_DISPLAY_MODE="Production"
WLS_DISPLAY_MODE="Production"
else
WLS_DISPLAY_MODE="Development"
fi
if [ "${WLS_USER}" != "" ] ; then
JAVA_OPTIONS="${JAVA_OPTIONS} -Dweblogic.management.username=${WLS_USER}"
fi
if [ "${WLS_PW}" != "" ] ; then
JAVA_OPTIONS="${JAVA_OPTIONS} -Dweblogic.management.password=${WLS_PW}"
fi
if [ "${MEDREC_WEBLOGIC_CLASSPATH}" != "" ] ; then
if [ "${CLASSPATH}" != "" ] ; then
CLASSPATH="${CLASSPATH}${CLASSPATHSEP}${MEDREC_WEBLOGIC_CLASSPATH}"
else
CLASSPATH="${MEDREC_WEBLOGIC_CLASSPATH}"
fi
fi
echo "."
echo "."
echo "JAVA Memory arguments: ${MEM_ARGS}"
echo "."
echo "WLS Start Mode=${WLS_DISPLAY_MODE}"
echo "."
echo "CLASSPATH=${CLASSPATH}"
echo "."
echo "PATH=${PATH}"
echo "."
echo "***************************************************"
echo "* To start WebLogic Server, use a username and *"
echo "* password assigned to an admin-level user. For *"
echo "* server administration, use the WebLogic Server *"
echo "* console at http://hostname:port/console *"
echo "***************************************************"
# CLASS CACHING
if [ "${CLASS_CACHE}" = "true" ] ; then
echo "Class caching enabled..."
JAVA_OPTIONS="${JAVA_OPTIONS} -Dlaunch.main.class=${SERVER_CLASS} -Dlaunch.class.path="${CLASSPATH}" -Dlaunch.complete=weblogic.store.internal.LockManagerImpl -cp ${WL_HOME}/server/lib/pcl2.jar"
export JAVA_OPTIONS
SERVER_CLASS="com.oracle.classloader.launch.Launcher"
fi
# START WEBLOGIC
echo "starting weblogic with Java version:"
${JAVA_HOME}/bin/java ${JAVA_VM} -version
if [ "${WLS_REDIRECT_LOG}" = "" ] ; then
echo "Starting WLS with line:"
echo "${JAVA_HOME}/bin/java ${JAVA_VM} ${MEM_ARGS} -Dweblogic.Name=${SERVER_NAME} -Djava.security.policy=${WL_HOME}/server/lib/weblogic.policy ${JAVA_OPTIONS} ${PROXY_SETTINGS} ${SERVER_CLASS}"
${JAVA_HOME}/bin/java ${JAVA_VM} ${MEM_ARGS} -Dweblogic.Name=${SERVER_NAME} -Djava.security.policy=${WL_HOME}/server/lib/weblogic.policy ${JAVA_OPTIONS} ${PROXY_SETTINGS} ${SERVER_CLASS}
else
echo "Redirecting output from WLS window to ${WLS_REDIRECT_LOG}"
${JAVA_HOME}/bin/java ${JAVA_VM} ${MEM_ARGS} -Dweblogic.Name=${SERVER_NAME} -Djava.security.policy=${WL_HOME}/server/lib/weblogic.policy ${JAVA_OPTIONS} ${PROXY_SETTINGS} ${SERVER_CLASS} >"${WLS_REDIRECT_LOG}" 2>&1
fi
stopAll
popd
# Exit this script only if we have been told to exit.
if [ "${doExitFlag}" = "true" ] ; then
exit
fi -
Recently I update Firefox and now I can't acces to my router
Recently I update Firefox and now I can't acces to my router main page any more.
Before I get a window that ask me to add an exception, cause the certificate ... as I check the remember the exception it always ask me for the exception. was not so bad as I have ask any time for the exception and finally I have acces to it . But now NO WAY !!!
I still go to internet, all my computers are connected but I could'nt reach the router to change some settings and add news computers ( my settings are very secure on my router to add a device I have to enter the MAC address). I still get my printer at 192.168.3.141, the modem at 192.168.1.1 but when I want to go to the router main page 192.168.3.1, I get this message :
Secure Connection Failed
An error occurred during a connection to 192.168.3.1. Cannot communicate securely with peer: no common encryption algorithm(s). (Error code: ssl_error_no_cypher_overlap)
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
I read that FF change some settings on the new versions and last time I enter on my router without problems was on October 10.
Now I have installed the 33.0.1 my OS Is XP.
PLEASE HELP WITH THAT ISSUE
EDIT: I suspect that my problem have to be with the certificate manager because I see it change a lot on this version, and have a place to add exception security like the old one that I use to have to check in the past.
it look like the same problem as me:
https://bugzilla.mozilla.org/show_bug.cgi?id=1042889
I don't understand almost nothing about certificates then I didn't find any tutorial explaining how to deal with. Also I sow that was totally diferent have some ssl things to check and now is a OCSP ??? for me all still chinesse (lol) I only want someting very simple: reach my router !!!.
I only see on authorities many times my router address, I try to add an exception and say the certificate couldn't be found. I don't know how to play with all this settings , but I'm shure have relation to my problem.
Sorry, my english it's not the best.[SOLVED)
@the-edmeister That work !!! thank you very much. I have to put it at SSLv3 option to this work.
I have a question for you. How I could figure out to work with that in the future? could I add an exception on the certificates? or something like that to still let me enter on my router web page? or how I could figure out to make any change on tomato router to still work with the new standard? . -
I updated Firefox and now it will not open at all. The hourglass shows that it's working but then nothing. I went to add/remove and removed mozilla and reinstalled it and still the same thing. It worked fine before I updated. Now I can't even remove the program at all. Why is this happening?
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
7.1 update to IPad now unable to use FaceTime and iMessage says could not sign in check your network connection. Why am I seeing this when I am connected?
Check Settings>General>Date & Time>Set Automatically>On. Make sure that the time zone setting is also set correctly.
If that didn't solve the problem, restart your iPad and try again. If that fails, reset your iPad and try again.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
I updated firefox and now have two desktop icons. How do I remove one?
I updated firefox and now have two desktop icons. When I try to delete one the remaining one no longer works. How do I get back to one icon which works?
Hi karenfaye,
To delete one of your online VZW accounts, login to that mobile number's account online and unregister it. If you need more assistance, send us a direct message or a private message on facebook.
Thanks,
EdW_VZW
Follow us on Twitter @VZWSupport -
HT4623 How do I retore app icons to screen after IO6 update? They now appear only in App store list
How do I retore app icons to screen after IO6 update? They now appear only in App store list
Go to iTunes, click on Apps in the left window, to bring up your app library. Then click on "check for updates" in the right window, bottom corner. If there are any updates available, you'll be notified of the number and you'll have to choose the apps you want to update in the next screen shown, or update them all at once after filling in your password.
You can also click on one app in the library and choose "get info" to see the actual version saved in your library.
Maybe you are looking for
-
-
How can I get JAXM SOAP with Attachement parts?
I received a SOAP with attachment message. Attached data is XML document("text/xml" type). But when I try to get a attachment part by using below source code, I got a NullPointerException. Iterator it = message.getAttachments(); AttachmentPart attach
-
Manufacturer part number to appear on when creating a request for quotation
my client want to be able to see the manufacturer part number already stored in the material master to appear on the request for quotation.
-
Photoshop CC 2014 will not save edits and has to be closed via Control alt delete and the edits are lost- hopin someone can help. thanks,John
-
Is disk Utility actually repairing the permissions or not?....
Hello there, I am running OS 10.6.7 on an original Mac Pro (2x3 GHz Dual-Core Intel Xeon) with 12GB of memory. Here is my question... I use disk utility once a week or so, to repair permissions on my operating system drive. Typically, it will run a