After an upgrade from Power mac G5 to iMac and PS will not run... Error - 150:30. Seems to be a Licensing issue. Any ideas? Works fine on the old Powermac...

Delighted with the new iMac but I have had an old version of CS4 for years now and it will not run on the new machine. I have tried Adobe customer care chat but it seems that nobody is available right now. Can anyone help?

I cannot locate the Flexnet folder by the way.... and the License recovery tool tells me that ....
You can’t open the application “LicenseRecoveryLauncher” because PowerPC applications are no longer supported.
Where do I go from here please?

Similar Messages

HT201210 When I try to do a software upgrade from 4 to 6 on my ipad I get a Network error message. i have full internet access. Any ideas?

I am trying to upgrade my ipad ios 4 to IOS 6 or above. I get a network error code saying the ipad upgrade server cannot be contacted. I do have full internet access on a high speed connection. Any suggestions?

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 7.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
 Cheers, Tom

Exclamation mark appears instead of photo. Recently upgraded from i mac to Macbook air and all was transferred over. I have run all the repair and rebuild functions in iphoto. Any other solution?

Exclamation mark appears instead of photo. Recently upgraded from i mac to Macbook air and all was transferred over. I have run all the repair and rebuild functions in iphoto. Any other solution?

Since iPLM failed to help try the following:
Starting over from scratch with new library
Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
1. Open the library package like this.
2. Launch iPhoto with the Option key held down and, when asked, select the option to create a new library.
3. Drag the subfolders of the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from the open iPhoto Library package into the open iPhoto window a few at a time.
This will create a new library with the same Events (but not necessarily the same Event names) as the original library but will not keep the metadata, albums, books slideshows and other projects.
Note: your current library will be left untouched for further attempts at a fix if so desired.
OT

When starting up after a erase/reinstall of Mac OS X 10.6 it will not accept any of my passwords/names

when starting up after a erase/reinstall of Mac OS X 10.6 it will not accept any of my passwords/names, I had just entered my info and clicked on "continue", the cube began to turn and froze, a translucent screen came over the whole window and request that I restart the computer, after doing so, I got the start up sound and a message saying that OS X was starting up and then the sign in window, but when I entered my info it kept shaking/rejecting it, only thing I can think is that could I have possibly entered my password wrong twice, don't know, I'm still scratching my head.

Do it again, I'm afraid. Be sure you set up the initial admin account with a proper password you can remember - all lowercase letters and numbers. No special characters or spaces except for the "_" underline character.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

I cannot seem to load raw images into LR 2.5. I've been using this for years. I always load from memory card, but it gives me an unknown error message. I tried to load from camera, hard drive, & external drive and still will not work. I checked import

I cannot seem to load raw images into LR 2.5. I've been using this for years. I always load from memory card, but it gives me an unknown error message. I tried to load from camera, hard drive, & external drive and still will not work. I checked import menu and nothing has changed. I loaded the photos onto my tablet and images are fine, so do not feel it is the memory card. Any thoughts?

The error message probably said "unsupported or damaged"
The T3 requires Lightroom 3.4.1 or later. You can either upgrade to a more current version of Lightroom (version 5.6 is the most recent) or you can use the free Adobe DNG Converter to convert the RAWs to DNG, which should import into Lightroom properly.

I dl'ed V. 4.0 and it will not run on my Mac with OS 10.4.11. What to do? I trashed v.3.0 and it is lost.

I dl'ed V. 4.0 and it will not run on my Mac with OS 10.4.11. What to do? I trashed v.3.0 and it is lost.
If V.4.o is not supported by my OS, can I dl the previous version (3.0)?

Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

HT1338 Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

Sorry for being unclear.
When I am using the update in the App Store App, there will be a list of various applications that have updates to be installed (Final Cut Pro will be in this list). I will already be logged in with the Apple ID I use for everything (my dev account). I will be able to update all of the other various applications needing updating except for my Final Cut Pro. When I click the update button next to the FCP update, it will give me an error saying "This download is not available for this apple ID either because it was bought by a different user or the item was refunded or cancelled"
I have not had any applications refunded or cancelled and this has only happened since my update to Yosemite. FCP was working fine until the upgrade. Is there anything that can be done to fix this?

When upgrading quicktime, I get an error code: -3, and itunes will not run.

when upgrading quicktime, I get an error code: -3, and itunes will not run. How do I fix?

i 'm very interest because on 3 PC , i have the same problem and i work at tv producer...

Just replaced my hard drive on my Mac book pro. Photoshop will not open error 150:30

Just replaced my hard drive on my Mac book pro. Photoshop will not open error 150:30

This is more of a Photoshop question than a Mac question. I typed the error into Google and there seems to be multiple threads about it in the Adobe forums. Here is one:
Photoshop Error 150:30

I am trying to connect with a friend via FaceTime from my IPad to his IPhone and it will not connect. We are both on wifi. What are we doing wrong?

I am trying to connect with a friend via FaceTime from my IPad to his IPhone and it will not connect. We are both on wifi. What are we doing wrong?

Read this:
There is a troubleshooting section at bottom.
http://support.apple.com/kb/TS5419

HT1349 I don't have a MAC, I have a PC and itunes will not run because I had an update and now it says msvcr80.dll isn't working or not installed and wont let me run itunes help me fix it.

I don't have a MAC, I have a PC and itunes will not run because I had an update and now it says msvcr80.dll isn't working or not installed and won't me install or run itunes anymore help me fix it.

MSVCR80.dll missing, cannot install iTunes - https://discussions.apple.com/message/24618776

Mac mini slowed down and now will not start up

Help!
I couple days ago i noticed my mac was running a bit slower than usual but I just ignored it since I brought it home for the holidays and thought it might just be the internet connection. Then, yesterday, I turned it on in the morning and it was running so slow that it would take up to 10 minutes just to open any window. TODAY, i turned it on again to try to solve the problem after being unsuccessful yesterday, and now the fan starts blowing really loud as soon as i turn it on as if it were hot (i don't know, im not very smart with computers) and it will not load past the first grey screen or the second blue one.
Any ideas on how to solve this problem? Also, if it matters, i'm not sure what my 'OS' is and since i can't turn my mac on i can't find out what it is at the moment...
Thanks for any suggestions!

Thanks for the info about having wrongly applied the PMU reset to your Intel Mini. That will account for the fan running full blast. Only known (cheap) fix is to apply the correct SMC reset.
http://support.apple.com/kb/HT3964?viewlocale=en_US
(The Mini's reset procedure is at the very end of that link.)
If that fixes the fan, then we have to consider that your original problem had something to do with the hard drive. Either the hard drive was too full, or else it was starting to fail and needed to re-read sectors -- which would account for things getting very slow.
Do you have any recollection of how full the drive was? Any warning messages?
To check for HardDrive failure or file system corruption, typically one would startup the Mini from the install disc that shipped with it and run DiskUtility from the Utilities menu at the top of the screen. But it seems you can't get your hands on that disc -- and you pretty much need the kind of disc that shipped with your model of Mini.

External backup drive will not mount on new mac mini. still works fine on the old one. new one is running mavericks

I just bought new-to-me mac mini running OSX mavericks.
Trying to migrate from old mac mini using simpletech external hard drive.
It still mounts on my old mac mini (system 10.5) but will not mount or show up when I plug it in to the new mac mini running mavericks.
Any ideas?

BDAqua wrote:
What exactly shows in System Profiler>Hardware>USB for those drives?
Boot from the Install Disc & see if they show up, not grayed out in Disk Utility.
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
We were thinking along the same lines. While at home I dug up a firewire enclosure and put a bootable GUID formatted drive in it (that I had in one of the usb enclosures) and started her computer holding down the option key and then chose to boot from the external firewire. All usb drives are now mounting upon connection. I asume that her drive has bad sectors on it (even though the SMART status says it's OK) and is not loading all the drivers properly for USB to mount. I was suspicious from the beginning that the OS was corrupt when she first had me look at it. It was at that point that I booted it in target mode, connected to my Macbook Pro, and then CCC'd to a usb drive that I had. I then had a couple of difficulties installing the new OS. Should have known......
I am now going to put a new drive in it for her and she'll be up and running.
Thanks so much for your help and thoughts that got me thinking as well.
pax

Beta 4 ver 6 installed on Mac Snow Leopard 10.6.4 will not run, will not delete, cannot reinstall any other version of mozilla, also mozilla help is useless and too confusing, is there not just a simple email address to ask for help?

Firefox tries to run, mac says name too long. It will run only when mounted but will not run from Applications. It refuses to delete and stays in trash, must use combinations of DropNuke2 and Trash to get it to delete I think! Then when trying to put any other version of Firefox in Applications, Finder states name already exists then refuses to move the Firefox application to APplications! Never had problems with Firefox until installed the stupid beta 4 ver 6!

It turns out that there's something wrong about permissions.
Here's the fix:
(1) log in as the +root user+
(2) type +chown -R Michael:staff ~Michael+
(3) log out the +root user+
(4) log in your account
(5) done!
Hope this thread will help those who encounter the same problem as me!

HT1695 I am visiting from the us and using my iPad using the wifi at my parents home just fine. Just brought one for my Mum and trying to set it up, it will not conect to wifi so cannot continue with set up. Any ideas ?

I am visiting from the US and using my iPad at my parents house using their WiFi. We brought a new iPad for my Mum and am trying to set it up, I get to step 3 chooses a network and it will not connect to WiFi, the same WiFi that I am using with no problem. Any ideas .

The first time you set up the iPad you must do it by connecting the iPad to a computer, which needs to be running the latest version of iTunes, using the provided USB cable that came with it. It cannot be done wirelessly initially.

After an upgrade from Power mac G5 to iMac and PS will not run... Error - 150:30. Seems to be a Licensing issue. Any ideas? Works fine on the old Powermac...

Similar Messages

Maybe you are looking for