After applying KB2975719 Windows Explorer takes all available RAM until BSOD

OS Windows 8.1x64 Pro.
After applying the latest cumulative update for Windows 8.1 I noticed APC_Index_Mismatch BSOD. I investigated further and found that Windows Explorer was using more and more of my RAM until there was insufficient to process system tasks and the machine crashed.
Removing the update fixed and I reapplied and confirmed the issue was back so its 100% to do with the update.
Further investigation showed that if I had a folder with MP4 files and I was using details view this could happen. It doesnt seem to be all MP4 files but certain ones cause the effect of ever increasing RAM usage every time I do a view refresh (or sort by
date etc) unless I restarted the process. RAM didn't decrease at all which suggests memory leakage. Any other view in Explorer eg list, tile etc and the issue is not present. Other file extensions seem fine.
Sadly I've been unable to verify on my office machine (Win8.1 Enterprise) which could have enabled me to raise a support case but thats a lot different from the setup of my home box & I can't replicate that in the office.
Can anyone confirm/offer any other suggestions for details view?

Hi,
We have noticed some issues, so investigation is in process. Now, Microsoft has removed the download links to these updates while these issues are being investigated.
Alex Zhao
TechNet Community Support

Similar Messages

  • PSE 13 organizer consumes all available RAM and crashes

    I have found that I am unable to use PSE13 Organizer for more than a couple of hours without my system becoming unstable. Organizer keeps requesting RAM until it has taken up all available RAM and my virtual memory file has expanded to fill the hard drive it is on. At this point Organizer and most other running programs crash, the system becomes unstable and Windows issues  out of memory warnings. I am at a loss as to what to do about this. Does anyone know if Adobe is planning on fixing this rather major bug?
    I am running Windows 8.1 64 bit on an AMD X6 1090 with 16GB RAM.
    Thanks

    ndgreen a écrit:
    I have found that I am unable to use PSE13 Organizer for more than a couple of hours without my system becoming unstable. Organizer keeps requesting RAM until it has taken up all available RAM and my virtual memory file has expanded to fill the hard drive it is on. At this point Organizer and most other running programs crash, the system becomes unstable and Windows issues  out of memory warnings. I am at a loss as to what to do about this. Does anyone know if Adobe is planning on fixing this rather major bug?
    I am running Windows 8.1 64 bit on an AMD X6 1090 with 16GB RAM.
    Thanks
    That's the first time I see that problem on Elements forums and bug reports.
    Investigating your particular situation will require more info:
    - on your hardware, your preferences (scratch disk)
    - your organizer usage (photos or videos), autoanalyzer and other opened softwares
    - any plugins?
    What happens if you stop and restart the organizer at shorter intervals? Do you see the RAM and virtual memory grow the same way?
    The only remotely similar situation I have met on all Elements versions is the impossibility to delete a large number of files in the same batch. The Organizer slowly fills all the RAM, then issues an error message and rolls back to the situation before the delete command. No crash.

  • Windows explorer takes 100% CPU

    Hi, folks ... I have t42 with a strange problem. Sometimes the windows explorer get 100% of the CPU especially when skype is on and rarely when its not sign in ... the OS installation is clean and I can't find any information about this. Thanks for help. Regards!

    Hello,
    Let's see if we can identify where the problem is more specifically....  A few questions, in no particular order:
    •  Does the problem occur if you log in as a different user?
    •  Does the problem occur if you start the computer in Safe Mode?
    Knowing the answers to the former will help us determine whether the problem is due to software running just under your user profile, while the answers to the latter will help reduce the number of possible programs that could be responsible for the issue, since booting in Safe Mode only loads a fraction of those which normally run under Windows.
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • Premiere takes all my ram

    Hi
    When i eksport a file from premierer, all my ram gets used up. my ram goes from 20 % to 80 and 90 % of total ram usage.
    This also happens when i try to play a importet movie in the program area. Its pretty annoying because when i eksport a file, i can't do anything else on my computer. i got 12 GB of ram, and a i5 processor.

    Do not do anything else while editing video
    What are you editing, and does your project match your video?
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
    Report back with the codec details of your file, use the programs below... a screen
    shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30
    For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
    How many hard drives, and do you have your projects and video files on a separate hard drive or do you only have one hard drive?

  • An operating system wasn't found after applying a Windows image

    I have a problem.
    I have applied the wim image to a new computer by using this method.
    http://technet.microsoft.com/en-us/library/hh824910.aspx
    The image was applied by using the next command.
    Dism /apply-image /imagefile:N:\Images\my-windows-partition.wim /index:1 /ApplyDir:W:\
    I have used the BCDboot tool to copy common system partition files.
    C:\Windows\System32\bcdboot W:\Windows /l en-US
    When everything is ready but when I try to boot computer to Windows, it says:
    An operating system wasn't found. Try disconnecting and drivers that don't contain an operating system. Press Ctrl+Alt+Delete to restart.
    I have deployed a different kind of computers by using DISM but I have never seen this kind of notification.

    I resolved the problem.
    The computer has been switched of after an applying process. The bcdboot tool has to be used directly after an applying process is completed successfully.
    X:\Windows\System32>W:\Windows\System32\bcdboot W:\Windows

  • SMTPD consumes all available RAM resources

    Hi all,
    I have a mail server that has extremely heavy disk activity after a few minutes of being booted, I have narrowed this down to heavy RAM usage by the SMTPD process.
    In Activity monitor, multiple SMTPD processes are spawned, consuming up to 2GB of real memory each (server has 8GB of RAM).
    The server keeps spawning these processes until there is too many, and it becomes unresponsive. As more spawn, the amount of real RAM used by each reduces, but the overall total remains the same.
    I think each process should only be using 1-2MB per instance.
    Server specs:
    10.5.7 server, external XServe RAID connected via fibre channel holds the mail.
    Connected to an OD system (not a replica).
    OD master and replica sit on separate XServes, also running 10.5.7. Approx 1300 users on the OD server.
    Is there a dud setting in /etc/postfix/master.cf or main.cf that may cause this, or is there something else at fault?
    Any help greatly appreciated!
    Cheers

    I think I might have found the problem, there is a bunch of these entries in the log file:
    CFPreferences: user home directory at /var/imap is unavailable. User domains will be volatile.
    Called Apple and they said to re-select the mail store location in Server Admin -> Mail -> Settings -> Advanced -> Database
    This seems to have done the trick, all the smtpd daemons are now only consuming around 1.8MB each, fingers crossed it stays this way!
    I think there will be a kbase article posted about this soon.
    Thanks for your help

  • How to take all the prevoius until space or tab

    suppose i have the following
    Kim/Name 3 4 london/Place 5 33/age 10
    suppose i ask the user to enter a number then i'll retreive all the data before that number for example
    if the user enter 3 i'll return K im/Name
    if the user enter 10 i'll return 33/age
    Where there is 1space between the number and the words???

    it should be
    Kim/Name 3 london/Place 5 33/age 10
    class Test {
         public static void main(String[] args) {
              String data = "Kim/Name 3 london/Place 5 33/age 10";
              String lookingFor = "5";
              String regexp = "([^ /]+/[^ ]+) " + lookingFor;
              Matcher matcher = Pattern.compile(regexp).matcher(data);
              if (matcher.find()) {
                   System.out.println(matcher.group(1));
              } else {
                   System.out.println("No match");
    }Kaj

  • Windows not seeing all my RAM?

    Double post. Sorry.
    Message was edited by: coolestkidever

    Hi,
    I am not using Vista, so I can't promise that with a 32-bit Vista you will get more than the 2GB you have right now with XP.
    From what I heard, I doubt it, although there are rumours that with the SP1 (Service Pack) for Vista you get about 3.2GB.
    As said, only with the 64-bit versions of either XP or Vista you will get all the 4GB that you have.
    If you want to upgrade from XP to Vista, then you can do that. No need for reinstallation.
    regards
    Stefan

  • LR 3.3RC still eats all available ram and swaps during preview

    I didn't see anything about ram issues being fixed in 3.3rc1...  and can confirm I'm still seeing problems.
    If I preview and rate 500 images LR starts swapping, as it ate 16gig of ram.  After that, everytime you preview a couple of more images, it swaps another chunk of ram to disk and allocates more.
    Personally, I think this is a bit excessive...
    Any word on when this will be fixed?
    Cheers!
    Mac, 64bit, 16gig ram, dual quad core processors

    It is a known and unfortunate limitation of how our current lens profile installation/uninstallation works. The workaround is to reinstall LR 3.2.

  • After installing windows 8.1 all images in LR5 show up as blank grey, regardless of catalog.

    As title says, after I installed Windows 8.1 all the images in LR5.4 show up as a blank grey color. Doesn't matter which catalog, or module. This includes on import, etc.

    Broken monitor profile, most like.
    Try reprofiling your monitor, or - as a test - setting it to sRGB and restarting your machine/Lightroom.

  • "Windows Explorer Has Stopped Working" Error Message Loop upon Startup of WIndows 7 Ultimate 64-bit

    Ok I have a HP Touchsmart 6000 running Windows 7 Ultimate 64 bit OS.  It is my 74 year old mothers computer and about 3 months ago it started acting up.  First thing that happened was the internal DVD Burner started working intermitently, recognizing
    her QuickBooks backup DVD files occasionally.  I got her a new  internal DVD burner and it worked for a while.   during that time on Startup Help and Support would all of a sudden popup right away.    Then recently Adobe Acrobat would
    launch a PDF file about Flash and keep opening multiple instances of it.   Now her new DVD doesnt work again and on startup at the windows desktop she gets an error "Windows Explorer has Stopped Working".   No matter what I click the error
    keeps looping.  No program has been opened that causes it to crash because the error happens immediately and keeps repeating.   I have tried to boot to Safe Mode, Safe Mode with Networking and have tried System Restore to no avail.
    I have ran Malwarebytes Antivirus, Malwarebytes AntiExploit, AntiRootkit as well as Combofix.   I have run the AntiMalware software from Microsoft and have updated all the drivers for the HP system.   To no succcess.
    At one point the system did load and an error came up JAN2OSD failed to start due to missing ACPI or something like that.  For that brief moment Explorer stopped crashing.   When I finished updating  driverss though the error  came back.
    Please Help  as she is about to cry and no one wants to make a 74 year old woman cry.:)
    Thanks,
    Jeff

    Hi,
    According to the steps you have performed, we have followed the steps mentioned in this KB article?
    Error: Windows Explorer has stopped working
    Hvae you tried the repair install of Windows 7? Follow the steps here:
    How to Perform an In-Place Upgrade on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
    Besides, if issue insists, please follow the steps below to generate a dump file:
    1. Create a new folder (named New folder)under C: drive.
    2. Please save the below as a .reg file, and then import it to registry, reference here:
    ===
    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps\explorer.exe]
    "DumpFolder"=hex(2):43,00,3a,00,5c,00,4e,00,65,00,77,00,20,00,66,00,6f,00,6c,\
      00,64,00,65,00,72,00,00,00
    "DumpCount"=dword:00000010
    "DumpType"=dword:00000001
    "CustomDumpFlags"=dword:00000000
    ===
     3.  After that , if Windows Explorer stops working again, please check the
    C:\New folder for dump files and then upload them.
    Meanwhile, please also make a contact with the manufacturer to see if we could get any further help from there.
    Best regards
    Michael Shao
    TechNet Community Support

  • Unable to delete songs from IPOD except through Windows Explorer

    hello,
    I have a first gen 1 gb Ipod Nano ver Ver 1.3.1 modem #
    ma352ll.
    About a week ago i tried to free up some space on my ipod by removing some songs. Since I began using my ipod I have just felt more comfortable manually managing my songs. So what i would normally do is simply delete the song from the music folder on my ipod and it is usually gone. (I know that simply deleting from a playlist does not delete from ipod). When I tried deleting some songs I found that the available space on my ipod did not change and obviously could nto add any more songs. When I went into windows explorer, in the music folder for my ipod, I i found the songs I wanted to delete (they were large files because they were podcasts). When I deleted the file from windows explorer the space was freed up on my ipod.
    I updated itunes and restored my ipod. I am not using itunes 7. Today I tried adding 7 podcasts to my ipod manually thru itunes and only 5 show up in my music folder, however, i can find all 7 in windows explorer AND all 7 in the playlists I added them to. They play perfectly fine when I play them, but obviously if I tried to delete the 2 suspect files from my playlist they would still be hidden somewhere on my ipod and I can only delete them through windows explorer.
    I am not sure what to do at this point, is there anybody who can shed some light on what I am doing wrong or if this is a known issue with itunes and and 1st gen nanos. It's getting annoying to have to play each file in winamp from windows explorer to find the song titles I want to delete and keep the rest. The folders show up as F00, F001, etc... and the songs show up as QVRD.mp3. I havew to play the file QVRD.mp3 throguh winamp so the name of the song comes up so I know if that is the hidden file or one of the others thats how up in itunes that I want to keep. Any ideas out there?

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync/delete all music and resync
    To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       

  • Forms are not opening after applying QSP patches in R12

    Hi All,
    please help on below issue.
    forms are not opening after applying QSP patches in R12.
    all services are up and runnin.
    E-biz:12.0.6
    DB:11.2.0.2
    Thanks in Advance.
    Regards
    Kumar

    Hi Hussein,
    Thanks for quick respond..
    OS version:Red Hat Enterprise Linux Server release 5.5 (Tikanga)
    The below list of patches we applied on 10.1.2 home:
    ===================================
    [email protected][P2PDB31] => opatch lsinventory
    Oracle Interim Patch Installer version 1.0.0.0.64
    Copyright (c) 2011 Oracle Corporation. All Rights Reserved..
    Oracle recommends you to use the latest OPatch version
    and read the OPatch documentation available in the OPatch/docs
    directory for usage. For information about the latest OPatch and
    other support-related issues, refer to document ID 293369.1
    available on My Oracle Support (https://myoraclesupport.oracle.com)
    Oracle Home : /s02/app/p2pdb31/apps/tech_st/10.1.2
    Oracle Home Inventory : /s01/app/p2pdb31/apps/tech_st/10.1.2/inventory
    Central Inventory : /u01/app/p2pdb31/inst/apps/P2PDB31_p2pap16d/admin/oraInventory
    from : /etc/oraInst.loc
    OUI location : /s01/app/p2pdb31/apps/tech_st/10.1.2/oui
    OUI shared library : /s01/app/p2pdb31/apps/tech_st/10.1.2/oui/lib/linux/liboraInstaller.so
    Java location : /s01/app/p2pdb31/apps/tech_st/10.1.2/jre/1.4.2/bin/java
    Log file location : /s02/app/p2pdb31/apps/tech_st/10.1.2/.patch_storage/<patch ID>/*.log
    Creating log file "/s01/app/p2pdb31/apps/tech_st/10.1.2/.patch_storage/LsInventory__03-12-2012_18-23-44.log"
    Result:
    Installed Patch List:
    =====================
    1) Patch 9974899 applied on Mon Mar 12 04:29:56 EST 2012
    Unique Patch ID: 14106915
    [ Bug fixes: 7552946 4692585 6790178 7529830 6526074 9974899 8416899 6018059 6024000 6772953 7514592 7529859 5596834 6844221 9892569 5724681 7430171 6471931 5979883 5155185 6060499 5740055 6134487 6912781 6681624 5985742 4473073 7021360 4685283 4635520 6433471 5902630 9288120 7519011 6237650 7195030 5763122 5999450 6917549 6150541 5562810 6647933 9204863 5453754 6153975 5697416 5932346 5573438 7146872 7574599 6682888 7229577 9195865 6655345 6713795 5025985 9213612 7113141  ]
    2) Patch 9273888 applied on Mon Mar 12 04:29:10 EST 2012
    Unique Patch ID: 14106915
    [ Bug fixes: 9273888  ]
    3) Patch 8447875 applied on Mon Mar 12 04:28:41 EST 2012
    Unique Patch ID: 14106915
    [ Bug fixes: 6490362 8447875 8351021  ]
    4) Patch 12828135 applied on Mon Mar 12 04:27:40 EST 2012
    Unique Patch ID: 14106915
    [ Bug fixes: 5220448 6350565 6079585 5458753 9655023 4175906 5901912 6864078 4486132 5896963 11725035 6647005 5095815 4519477 5347751 4691191 4754900 5861360 8290534 5382595 5071931 6370967 5458543 6607951 5179574 4329444 5029950 5464895 5029952 5029954 5738539 5648727 5352587 5631915 4402808 4871035 6455161 5114396 5091108 5584790 4605877 4751932 5751672 5490845 10080564 6753516 8534394 3345756 5933477 7592360 5094098 10183338 5015557 4679094 5675556 5154689 12828135 5222931 5910829 5754150 5227879 4152843 4661844 6079603 5637094 7044603 6016022 4905112 8290629 4581220 4166537 7120513 5276400 7154097 7154098 5408664 5563256 6395024 4146291 6397568 6854919 12419228 9108675 5901877 4768040 5049074 7022400 5960451 5490935 5049077 4542188 4680009 4593539 4555795 12565867 5406923 4359124 5689908 5258410 4969005 3962946 3743912 5648102 9352208 5057964 8836540 3935623 5014128 4873311 4439469 4331689 6705965 4597251 4903532 6055387 9764906 7576788 5650178 5225797 4047969 4554284 5376215 4874628 5401921 5151518 4458415 4700543 7375686 5226235 4900129 5122955 5095648 4561867 5239126 5869471 4712638 5354517 4925103 4745776 5998987 4939157 6404864 4627335 7300525 5501362 4587572 4969029 9119261 6270140 5055442 7334756 6639839 4492467 5222032 5151675 5242647 6999528 6737308 7137797 6864202 4587431 5605370 6647068 9952279 6826532 4335559 5417371 4671216 5065930 9362645 4575854 6130365 5355257 7173149 5243019 6639553 4966417 5884075 4899479 4610820 3837600 5092688 4528572 4449900 4601861 6009358 4226736 6404447 4348230 8785236 5233111 5644862 4197970  ]
    5) Patch 12434128 applied on Sun Mar 11 23:48:16 EST 2012
    Unique Patch ID: 14106915
    [ Bug fixes: 9357234 7379127 9173023 8265594 7135493 12434128 7135488 8298232 9772332 9765884 7156655 7608327 7156648 8537027 9679852 7379122  ]
    6) Patch 9593176 applied on Sun Mar 11 19:07:38 EST 2012
    Unique Patch ID: 12856826
    [ Bug fixes: 5116235 5969391 7573720 6395358 7392832 7526041 8287889 8428638 9200985 6446152 8342525 8319129 8278813 6128859 4407272 7021759 5563375 7369690 7001328 7497460 9499728 9254095 7215354 7164050 7171994 6770810 9084276 7304653 7595761 1947595 8859958 5950737 6722224 7442879 8242418 9463433 6391947 7240862 6652955 7358376 6857221 7329300 8928753 8947375 8974551 9390538 7114153 6025516 7833659 9320023 6460568 7286928 5465339 8272078 7651246 6821297 7350891 6823259 6704955 9293220 5375851 8552429 7261996 8755926 8316127 8359788 7567072 6894576 8348570 8847739 7512736 7231982 7529909 7242694 6998181 6933210 7621923 9148117 5733397 6683962 7142365 6999812 6747939 6251633 3213707 8623626 7170999 7029083 6132689 7657973 7552880 7359193 8928735 8940272 6078303 8866722 6790720 9436383 7000696 5155021 8221857 7319888 4526825 8808264 9902558 8339004 8485711 9148124 7126045 6724714 7175618 6502349 6510297 9124173 7123031  ]
    7) Patch 11669923 applied on Sun Dec 11 02:00:51 EST 2011
    Unique Patch ID: 13373014
    [ Bug fixes: 11669923 10174371 8602992  ]
    8) Patch 6400501 applied on Sat Nov 12 20:13:35 EST 2011
    [ Bug fixes: 6400501  ]
    9) Patch 5394728 applied on Mon Aug 24 14:47:45 EDT 2009
    [ Bug fixes: 5394728  ]
    10) Patch 3559326 applied on Mon Aug 24 14:46:51 EDT 2009
    [ Bug fixes: 3559326  ]
    11) Patch 8300196 applied on Mon Aug 24 14:40:34 EDT 2009
    [ Bug fixes: 8300196  ]
    12) Patch 7140405 applied on Mon Aug 24 14:40:04 EDT 2009
    [ Bug fixes: 6764875 6116405  ]
    13) Patch 6371228 applied on Mon Aug 24 14:38:32 EDT 2009
    [ Bug fixes: 6371228  ]
    14) Patch 5917053 applied on Mon Aug 24 14:37:45 EDT 2009
    [ Bug fixes: 5917053  ]
    15) Patch 7016961 applied on Mon Aug 24 14:35:24 EDT 2009
    [ Bug fixes: 7016961  ]
    16) Patch 6995251 applied on Mon Aug 24 14:27:40 EDT 2009
    [ Bug fixes: 6995251  ]
    17) Patch 7121788 applied on Mon Aug 24 13:20:56 EDT 2009
    [ Bug fixes: 7121788  ]
    OPatch succeeded.
    ============================================================
    we got the error, servlet error in application.log
    12/03/05 18:13:15.482 formsweb: 10.1.3.5.0 Started
    12/03/05 18:13:39.497 formsweb: ListenerServlet init()
    12/03/05 20:26:53.850 formsweb: Broken pipe
    12/03/05 20:26:53.851 formsweb: Servlet error
    java.io.IOException: Broken pipe
    at sun.nio.ch.FileDispatcher.write0(Native Method)
    at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
    at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:100)
    at sun.nio.ch.IOUtil.write(IOUtil.java:71)
    at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
    at java.nio.channels.Channels.writeFullyImpl(Channels.java:59)
    at java.nio.channels.Channels.writeFully(Channels.java:81)
    at java.nio.channels.Channels.access$000(Channels.java:47)
    at java.nio.channels.Channels$1.write(Channels.java:155)
    at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:662)
    12/03/12 09:37:34.639 formsweb: 10.1.3.5.0 Started
    12/03/12 09:54:40.191 formsweb: Servlet error
    java.lang.NoClassDefFoundError: oracle/forms/servlet/MLEncoder
    at oracle.forms.servlet.FormsServlet.parseLine(Unknown Source)
    at oracle.forms.servlet.FormsServlet.doRequest(Unknown Source)
    at oracle.forms.servlet.FormsServlet.doGet(Unknown Source)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.5.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:734)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.5.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:391)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.5.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:911)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.5.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:458)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.5.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.5.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
    at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
    at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.5.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:662)
    Caused by: oracle.classloader.util.AnnotatedClassNotFoundException:
    Missing class: oracle.forms.servlet.MLEncoder
    Dependent class: oracle.forms.servlet.FormsServlet
    Loader: forms.web.formsweb:0.0.0
    Code-Source: /s02/app/p2pdb31/apps/tech_st/10.1.3/j2ee/forms/applications/forms/formsweb/WEB-INF/lib/frmsrv.jar
    Configuration: WEB-INF/lib/ directory in /s02/app/p2pdb31/apps/tech_st/10.1.3/j2ee/forms/applications/forms/formsweb/WEB-INF/lib
    This load was initiated at forms.web.formsweb:0.0.0 using the loadClass() method.
    The missing class is not available from any code-source or loader in the system.
    at oracle.classloader.PolicyClassLoader.handleClassNotFound(PolicyClassLoader.java:2204)
    at oracle.classloader.PolicyClassLoader.internalLoadClass(PolicyClassLoader.java:1726)
    at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1682)
    at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1667)
    Regards
    Kumar

  • Can't see Zen Mozaic content in Windows Explorer

    After installing Creative Centrale, I updated my Mozaic firmware to the 64 bit 7 OS. Now, I can no longer see all my Zen Mozaic content in Windows Explorer.
    All the songs and playlists are still on the Mozaic, but I only see about 15 songs of the approximately 1000 songs on the Mozaic using Explorer.
    Restored my computer to earlier date, and results are same. Have 64bit 7 OS.
    I plugged my wife's Zen Mozaic into the same computer and all the songs are visible through Windows explorer.

    Hello Mike,
    Welcome to Creative forums!
    Try cleaning up your player. Run the recovery mode (refer to my post here on how to boot from the recovery mode, #25 for plain Mozaic and #26 for Mozaic EZ series) and select CleanUp->Reboot. See if that helps.

  • Folder appears in Windows Explorer, but not in the Open File dialog

    Hello,
    I hope this is the right place to post this. If not, please let me know where is.
    A friend just showed me a weird problem he is having with his computer. He is using Windows 7 pro, and has a folder under My Documents, in which he keeps his work files. He emails these files using Gmail, which he accesses via Internet Explorer.
    All worked fine until a few days ago, when he noticed that when he clicked the link in Gmail to attach a file, his folder wasn't listed in the Open File dialog. He looked in Windows Explorer, and could see the folder OK. I tried opening Word and using the Open
    File dialog there, and the folder wasn't visible.
    If he clicks in the address bar, and adds the folder name to the path, it opens the folder, but shows it as empty. I actually has two subfolders. If he adds the name of a subfolder, then the Open File dialog shows the files in that folder.
    I checked the permissions on the folder, and couldn't see anything odd. What I don't understand is how the folder can be visible in Windows Explorer, and not in the Open File dialog.
    Anyone any ideas? Thanks
    FREE custom controls for Lightswitch! A collection of useful controls for Lightswitch developers.
    Download from the Visual Studio Gallery.
    If you're really bored, you could read about my experiments with .NET and some of Microsoft's newer technologies at
    http://dotnetwhatnot.pixata.co.uk/

    I can confirm - I'm having the exact same problem.
    When I try to lookup or save a file from an IE file dialog some folders do not show up. I can type the folder name into the directory field and it then goes there, but this assumes you know the directory name and it's a PITB.
    Firefox can browse to the directory directly.
    It would be interesting if anyone else found a fix for this - I'll post here again if I find out more somewhere else, but there are not too many threads out there as far as I have found for now.
    Found a solution over at answers at Microsoft dot com. (can post links here yet - will update once I can)
    In short: There's a fast fix for this issue by resetting a hidden flag that IE sets for some folders. I believe this part of the "protected mode" feature, though I can't confirm and also have no idea how this would protect me from any intruders,
    if only (unimportant) subfolders are protected ...
    Anyway - if you know the name of the missing folder (e.g. from browsing the directories form windows explorer): in the parent directory that has the folder missing do a Search (in box at top right) for the missing
    folder name. In my case the hidden folder shows up in the search - now right click -> Properties -> clear hidden flag. Note: this "hidden" flag is independent of the flags set in windows explorer - that's why you have trouble going there with IE and not
    the file explorer from the desktop.

Maybe you are looking for