After applying support package up to sapkb64020 finance node in IMG disappe
We havwe an ECC5. It seems that (very probably as we noticed aftervards)after applying
support package up to sapkb64020 in IMG(SPRO) "finance" node(and nodes
beneath) disappeared. As this is very urgent I would kindly ask you for good answers
Hey,
The sulotion for this problem exists in note number 922552:
Note 922552 - SPRO: Financial Accounting Node not visible in Reference IMG
good luck
Similar Messages
-
MAM Not Working After Applying Support Package
We have been lived with MAM 2.5 with SP16 for almost a year now. We recently applied support package 19 for ABAP and J2EE stacks but MAM stopped working right after that. To fix the problem we had to do the following steps:
1. Disable all SyncBO
2. Regenate all SyncBO
3. Run Replicate Database
4. Enable all SyncBO
5. Delete MAM 2.5 client by WebConsole for all PDA (over 100 devices)
6. Re-Assign MAM 2.5 client back to PDA from WebConsole
My question is do we have to perform those steps above every time we are applying new support package? If it is a case, it's very time consuming because we have to manually perform step 5-6 for every users.
Does anyone have seen or experience this scenario before? Your comment is highly appreciated.
Regards,
Dai LyHi Karthik,
Let me clarify on "Not working"
It showned synchrozation successuffly but no data transfer between client and middleware and vs. For instance, the user never receive any new work orders, or their times never got transfered back to R/3. Even though, there is no error on the client.
It appear that step 1-4 are required otherwise, you get ABAP Runtime error (using ST22):
Runtime Error CALL_FUNCTION_NOT_FOUND
Except. CX_SY_DYN_CALL_ILLEGAL_FUNC
Date and Time 02/07/2007 08:12:27
After we performed step 1-4 but there were data transfer between client and R/3. The only way to get it working, we had to delete client and re-assign MAM 2.5 back to each users.
No, we didn't apply client patch SP19. We are still using SP16.
As we speak, everything is working because we had to re-assign MAM 2.5 for every users. but I hope we don't have to do this next time we apply another Support Package.
Thanks.
Dai Ly -
Unable to Login & Ececute any transaction after Applying Support Package
Dear all,
After applying SAP_BASIS Packs (SAPKB700..) support pack from level 15 to 18, the it got cancelled and when i try to execute any transaction i am receiving ABAP dump "syntax_error".
When i try to login i m getting the following msg. " Syntax error in program "SAPLSDOC ""..
SAME MESSAGE IS POSTED IN 2007 BUT NO ANSWER
Unable to login after applying patches
could you help me to resolve this problem?
Thanks and regards.
SubbuHi,
Is Support Package upgrade failed in IMPORT_PROPER step ? then plesae refer
support pack SAPKB70014 stuck at import _proper! Very urgent.
http://www.sapfans.com/forums/viewtopic.php?f=12&t=309661&p=954180
We also faced same issue in Solution manager and issue solved by running to r3i commad
tp r3i <SP_name> <SID> pf=<transport profile> -Dclientcascade=yes -Dstoponerror=8 -Drepeatonerror=8 -Dsourcesystems= tag=SPAM
eg:
D:\usr\sap\trans\bin>tp R3I SAPKB70014 SID pf=TP_DOMAIN_SID.PFL
-Dclientcascade=yes -Dstoponerror=8 -Drepeatonerror=8 -Dsourcesystems= tag=SPAM
Note: Before executing above command please contact SAP (OSS message)
Thanks,
Preethish -
Error while applying support packages
Hi,
I was applying support packges for NW 7.0 EHP2 for the components SAP BASIS/ABAP/PI BASIS & BW, the support package level was 02, I have downloaded 03,04,05,06 for all the above four components. While updating spam/saint update I got the above error, displayed below. But even while applying support packages I got a list of errrors.
1.
Category: Abap programming error
Runtime error: call_function_parm_unknown
CX_SY_DYN_CALL_PARAM_NOT_FOUND
abap program: RSSPAM07
Function parameter "IV_IMP_SCENARIO" in unknown
this first error displayed after applying SPAM/SAINT update.
2. The import was stopped, since an error occured during the phase IMPORT_PROPER, which the support package Manager is unable to resolve without your input
The following details help you to analyse the problem:
Error in phase : IMPROT_PROPER
Reason for error:
Return code:
Error Message:
Please provide any solution as soon as possible....The details of SLOG
START CMDIMPORT NG1 L 20120227162812 SHABZ BasisTrn3 20120227162811973
STOP CMDIMPORT NG1 L 20120227162813 SHABZ BasisTrn3 20120227162811973
START imp all NG1 20120227162821 SHABZ BasisTrn3 20120227162821661
INFO: event SAP_IMPORT_START triggered successfully
START DD IMPORT NG1 H 20120227162822 SHABZ BasisTrn3 20120227162821661
STOP DD IMPORT NG1 H 20120227162839 SHABZ BasisTrn3 20120227162821661
START DD ACTIVATION NG1 A 20120227162839 SHABZ BasisTrn3 20120227162821661
START tp_getprots NG1 J 20120227162839 SHABZ BasisTrn3 20120227162821661
STOP tp_getprots NG1 J 20120227162925 SHABZ BasisTrn3 20120227162821661
STOP DD ACTIVATION NG1 A 20120227162925 SHABZ BasisTrn3 20120227162821661
START DISTRIBUTION OF DD-O NG1 S 20120227162925 SHABZ BasisTrn3 20120227162821661
START tp_getprots NG1 S 20120227162925 SHABZ BasisTrn3 20120227162821661
STOP tp_getprots NG1 S 20120227162929 SHABZ BasisTrn3 20120227162821661
STOP DISTRIBUTION OF DD-O NG1 S 20120227162929 SHABZ BasisTrn3 20120227162821661
INFO TBATG CONVERSION OF NG1 N not needed SHABZ BasisTrn3 20120227162821661
START MOVE NAMETABS NG1 6 20120227162929 SHABZ BasisTrn3 20120227162821661
START tp_getprots NG1 P 20120227162929 SHABZ BasisTrn3 20120227162821661
STOP tp_getprots NG1 P 20120227162935 SHABZ BasisTrn3 20120227162821661
STOP MOVE NAMETABS NG1 6 20120227162936 SHABZ BasisTrn3 20120227162821661
START MAIN IMPORT NG1 I 20120227162936 SHABZ BasisTrn3 20120227162821661
STOP MAIN IMPORT NG1 I 20120227163023 SHABZ BasisTrn3 20120227162821661
START TBATG CREATION OF EN NG1 n 20120227163024 SHABZ BasisTrn3 20120227162821661
START tp_getprots NG1 Y 20120227163024 SHABZ BasisTrn3 20120227162821661
STOP tp_getprots NG1 Y 20120227163034 SHABZ BasisTrn3 20120227162821661
STOP TBATG CREATION OF EN NG1 n 20120227163034 SHABZ BasisTrn3 20120227162821661
START EXECUTION OF REPORTS NG1 R 20120227163035 SHABZ BasisTrn3 20120227162821661
START tp_getprots NG1 R 20120227163035 SHABZ BasisTrn3 20120227162821661
STOP tp_getprots NG1 R 20120227163202 SHABZ BasisTrn3 20120227162821661
STOP EXECUTION OF REPORTS NG1 R 20120227163202 SHABZ BasisTrn3 20120227162821661
INFO EXECUTION OF STANDAR NG1 9 not needed SHABZ BasisTrn3 20120227162821661
INFO: event SAP_IMPORT_STOP triggered successfully
STOP imp all NG1 0004 20120227163203 SHABZ BasisTrn3 20120227162821661
START CMDIMPORT NG1 L 20120227164418 SHABZ BasisTrn3 20120227164416991
STOP CMDIMPORT NG1 L 20120227164454 SHABZ BasisTrn3 20120227164416991
START DD IMPORT NG1 H 20120227165608 SHABZ BasisTrn3 20120227165607479
STOP DD IMPORT NG1 H 20120227170309 SHABZ BasisTrn3 20120227165607479
START DD ACTIVATION NG1 A 20120227170313 SHABZ BasisTrn3
START tp_getprots NG1 J 20120227170313 SHABZ BasisTrn3
STOP tp_getprots NG1 J 20120227171206 SHABZ BasisTrn3
STOP DD ACTIVATION NG1 A 20120227171206 SHABZ BasisTrn3
START imp all NG1 20120227171208 SHABZ BasisTrn3 20120227171207614
INFO: event SAP_IMPORT_START triggered successfully
START DISTRIBUTION OF DD-O NG1 S 20120227171208 SHABZ BasisTrn3 20120227171207614
START tp_getprots NG1 S 20120227171208 SHABZ BasisTrn3 20120227171207614
STOP tp_getprots NG1 S 20120227171303 SHABZ BasisTrn3 20120227171207614
STOP DISTRIBUTION OF DD-O NG1 S 20120227171304 SHABZ BasisTrn3 20120227171207614
START TBATG CONVERSION OF NG1 N 20120227171304 SHABZ BasisTrn3 20120227171207614
START tp_getprots NG1 N 20120227171304 SHABZ BasisTrn3 20120227171207614
STOP tp_getprots NG1 N 20120227171307 SHABZ BasisTrn3 20120227171207614
STOP TBATG CONVERSION OF NG1 N 20120227171307 SHABZ BasisTrn3 20120227171207614
START MOVE NAMETABS NG1 6 20120227171307 SHABZ BasisTrn3 20120227171207614
START tp_getprots NG1 P 20120227171308 SHABZ BasisTrn3 20120227171207614
STOP tp_getprots NG1 P 20120227171755 SHABZ BasisTrn3 20120227171207614
STOP MOVE NAMETABS NG1 6 20120227171755 SHABZ BasisTrn3 20120227171207614
START MAIN IMPORT NG1 I 20120227171756 SHABZ BasisTrn3 20120227171207614
ERROR: RFC function TRINT_PROGRESS_INDICATOR error: SYSTEM_FAILURE
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
STOP MAIN IMPORT NG1 I 20120227195335 SHABZ BasisTrn3 20120227171207614
START TBATG CREATION OF EN NG1 n 20120227195335 SHABZ BasisTrn3 20120227171207614
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
START tp_getprots NG1 Y 20120227195335 SHABZ BasisTrn3 20120227171207614
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
STOP tp_getprots NG1 Y 20120227195521 SHABZ BasisTrn3 20120227171207614
STOP TBATG CREATION OF EN NG1 n 20120227195521 SHABZ BasisTrn3 20120227171207614
INFO EXECUTION OF STANDAR NG1 9 not needed SHABZ BasisTrn3 20120227171207614
INFO: event SAP_IMPORT_STOP triggered successfully
STOP imp all NG1 0903 20120227195522 SHABZ BasisTrn3 20120227171207614 -
Syntax Error while applying support package stack 8
I get the following short dump while I was applying support package stack 8. I'm at the latest saint version 34
Runtime Errors SYNTAX_ERROR
Date and Time 23.07.2009 14:09:27
Short text
Syntax error in program "CL_DYNPRO_PROPERTY_BAG========CP ".
What happened?
Error in the ABAP application program.
The current ABAP program "SAPLSCR2" had to be interrupted because it con
a statement that cannot be executed.
In the include "CL_DYNPRO_PROPERTY_BAG========CM009 " in the line 176 of
program "CL_DYNPRO_PROPERTY_BAG========CP " the following syntax
errors occur:
"The field "SPROP_C_TAG_CUSTOMPROPERTY" is unknown, but there is a fiel"
"d with the similar name "SPROP_C_TAG_TOOLTIPTEXT". "SPROP_C_TAG_TOOLTI"
"PTEXT"."
Author and last person to change the include are:
Author "SAP "
Last changer "SAP "
Error analysis
The following syntax error was found in the program
CL_DYNPRO_PROPERTY_BAG========CP :
"The field "SPROP_C_TAG_CUSTOMPROPERTY" is unknown, but there is a fiel"
"d with the similar name "SPROP_C_TAG_TOOLTIPTEXT". "SPROP_C_TAG_TOOLTI"
"PTEXT"."
Trigger Location of Runtime Error
Program SAPLSCR2
Include LSCR2U47
Row 31
Module type (FUNCTION)
Module Name RS_SCRP_PROP_ADD_TO_PROP_LIST
1 FUNCTION RS_SCRP_PROP_ADD_TO_PROP_LIST.
2 *"----
3 ""Lokale Schnittstelle:
4 *" IMPORTING
5 *" REFERENCE(P_TEXTFIELD) TYPE D021S-FNAM OPTIONAL
6 *" REFERENCE(P_TOOLTIPTEXT_TEXTELEM) TYPE CHAR3 OPTIONAL
7 *" REFERENCE(P_TOOLTIPTEXT_VARIABLE) TYPE D021S-FNAM OPTIONAL
8 *" REFERENCE(P_KEEPTAB) TYPE SEU_BOOL OPTIONAL
9 *" REFERENCE(P_DISABLEIMPLICITLABELS) TYPE SEU_BOOL OPTIONAL
10 *" REFERENCE(P_BARCODEINPUT) TYPE SEU_BOOL OPTIONAL
11 *" CHANGING
12 *" REFERENCE(P_PROP_LIST) TYPE PROP_LIST
13 *"----
14
15 data: l_prop type prop_line,
16 l_prop_list type prop_list,
17 l_string type prop_str.
18
19 * Property TextField
20 * -
21
22 if p_textfield is supplied.
23 clear l_prop_list.
24 clear l_prop.
25 l_prop-name = sprop_c_tag_textfield_name.
26 l_prop-syntax = sprop_c_syntax_content .
27 l_prop-value = p_textfield.
28 append l_prop to l_prop_list.
29 * Zusammensetzen eines Strings der Form
30 * <Name>value_1</Name> ... <Name>value_n</Name>
>> call method cl_dynpro_property_bag=>fill_prop_list_into_properties
32 exporting
33 prop_list = l_prop_list
34 importing
35 properties = l_string.
36 * Property-Eintrag zusammensetzen
37 clear l_prop.
38 l_prop-name = sprop_c_tag_textfield.
39 l_prop-type = sprop_c_type_string.
40 l_prop-syntax = sprop_c_syntax_content .
41 l_prop-value = l_string.
42 * Property-Eintrag in PROP_LIST aufnehmen/ersetzen
43 read table p_prop_list transporting no fields
44 with key name = l_prop-name.
45 if sy-subrc = 0.
46 modify p_prop_list index sy-tabix
47 from l_prop.
48 else.
49 append l_prop to p_prop_list.
50 endif.
Can anyone help me? I now get the same error with executing other transactions as well.Hi,
Please let us know the component which you are trying to apply. Is it BASIS or ABAP or BW and also let us know the version?
I hope you are applying the BW patch 8, as per SAP's recommendation we need to apply both 8 an 9 patch of BW at the same time. If not we need to apply some notes which you could find in the service market place. Once you apply the notes, you can proceed with the SP application.
Regards,
Varadhu -
DDIC_ACTIVATION ERROR WHILE APPLYING SUPPORT PACKAGE SAPKW35020 IN ECC5.0
Hi Gurus,
I am getting error DDIC_ACTIVATION while applying support package(BW) SAPKW35020 in ECC5.0 with MSSQL database in Windows server.
I am not able to reset the queue, when i tried to reset the queue the system prompting that " cannot reset queue while DDIC_ACTIVATION" phase".
Can you please help to reset the queue and implementing this support package.
Thank you,
Regards,
GaneshPaste the SPAM log here.
Regards,
Nick Loy -
DDIC_ACTIVATION ERROR WHILW APPLYING SUPPORT PACKAGES
Hi all,
While applying support package(KB62019),i got error(DDIC_Activation)..
How to resolve it?
Thanks in advance.Hi,
Which support package are you applying ? Have a look at these notes: 782140 and 447925.
Search for SAPKB62019 in this note and you will get a solution to that. The note refers to some more notes. Please follow the instuctions in the note carefully.
Cheers,
Sunil
PS: Reward points for helpful answers. -
Error after applying support patch SAPK-40009INCPRXRPM
Hi all,
In our PLM system after applying support patch SAPK-40009INCPRXRPM of component CPRXRPM, release-400
we are getting some short dumps like CALL_FUNCTION_NOT_FOUND saying that OLR3_DMS_RFC_LOAD_OBJECT_LINKS function module can't found but this function module doesn't exist in the system.
plz help me in this regard.
Thanks in advance.
Regards,
RajaThanks for the prompt response Samrat,
But with SGEN we can only regenerate the programs, but here the problem is the module I mentioned doesn't exist in system.
Regards,
Raja -
InfoObjects Key disappeared after BW support packages applied
Hi.
We have a serious problem, after we applied BW support packages (7.0110) all our infoobjects that are created as text only, no master data, are only displaying the text. The objects key is empty. Do anybody have a solution for this?
Koos.Hi.
We have found a work around for the problerm for know and here it is:
5.1.3 Optimizing detail object syntaxFor queries on BI universes that include only the key and medium name detail objects of adimension, it is possible to modify the generated syntax of the objects to improve queryperformance, due to some internal details of the OLAP BAPI interface.To modify the syntax:
1.Open the universe in Designer.
2.Double click the key detail object you want to modify.
3.In the Select text box on the "Definition" tab of the "Edit Properties" dialog box, changethe syntax to refer to the NAME attribute of the SAP characteristic.For example, for the objectL01 Customer Key , change the generated select syntax:[Z_CUSTOM].[LEVEL01].[[2Z_CUSTOM]].[Value] to refer to the NAME attribute:[Z_CUSTOM].[LEVEL01].[NAME]4.ClickOKto save the changes.5.Follow the same steps for the name object. Change the syntax to refer to theDESCRIPTION attribute of the SAP characteristic. -
The customer themes not working after installing support package.
Hi,
In a Web dynpro ABAP aplication that i made in a project, we have a customer theme. We transported the development of a new host that had a higher level of support package, and it has stopped working properly the customer theme. We´ve gone from 7.0 sp 9 to sp 20. Well, when you run the programa WD_THEMES, in the ALV appeared to me not the customer theme. So I exported the standar themes and with Eclipse, I´ve copied and re-created the customer theme by modifying the latter.
Once changed, I try exporting to the test environment and it is here that the level of support package was sp18. I could not import it because the version was not the same.In the development environment was 7.0.19.1 and in the test environment was 7.0.15.1.
The question that comes to me is when we have a customer theme in a environment and upgrade the level of support package, is the version of all themes listed in the program updated or only the standar themes?. If this is so, if we upgrade the level of support package we will have to re-export the standar themes, copy one of theme and go back to redo our theme, right?.
Thanks and hope your answer.Hi Karthik,
Let me clarify on "Not working"
It showned synchrozation successuffly but no data transfer between client and middleware and vs. For instance, the user never receive any new work orders, or their times never got transfered back to R/3. Even though, there is no error on the client.
It appear that step 1-4 are required otherwise, you get ABAP Runtime error (using ST22):
Runtime Error CALL_FUNCTION_NOT_FOUND
Except. CX_SY_DYN_CALL_ILLEGAL_FUNC
Date and Time 02/07/2007 08:12:27
After we performed step 1-4 but there were data transfer between client and R/3. The only way to get it working, we had to delete client and re-assign MAM 2.5 back to each users.
No, we didn't apply client patch SP19. We are still using SP16.
As we speak, everything is working because we had to re-assign MAM 2.5 for every users. but I hope we don't have to do this next time we apply another Support Package.
Thanks.
Dai Ly -
Problem after applying support pack 15
Hi ,
I applied Support Pack 15 for SOLMAN 4.00. Every thing went fine , but after that i entered into maintenance optimizer and tried to download a package, then its giving error saying "No Customer numbers in transaction AISUSER". When i click that it gave a popup saying as below:
Message Number: SOLMAN_SAP_BACKEND016
Diagnosis
There are no entries with a customer number in the 'Customer Number' field in the table AISUSER.
System Response
You cannot get customer number-specific RFC destinations.
Procedure
Maintain these entries manually or start the report
SMBI_AISUSER_VAR_MIG to copy any existing customer number from the table AISDK_CF_OSS_USR.Please guide me
ThnaksYes i did the same and when i went to maintenance optimizer it says:
Message Number: SOLMAN_SAP_BACKEND016
Diagnosis
There are no entries with a customer number in the 'Customer Number' field in the table AISUSER.
System Response
You cannot get customer number-specific RFC destinations.
Procedure
Maintain these entries manually or start the report
SMBI_AISUSER_VAR_MIG to copy any existing customer number from the table AISDK_CF_OSS_USR.
Actually for this message i got a note 1140822 in the forums and when im following this note i got the error mentioned earlier (below):
The RFC-user does not belong to a VAR- or CCC-customer number
Message no. AI_SC_EN111
Diagnosis
The user used in RFC destination SAP-OSS does belong to a simple customer number that is not assigned to a Value Added Reseller or Customer Competence Center in SAP Support Portal.
Procedure
You need to maintain your customer numbers manually in table V_AISAPCUSTNOS or choose another user.
Reply
I couldnt get much information for this error though i gave 6 digit in theV_AISAPCUSTNOS and 10 digit in the AISUSER.
Forward -
Error in the phase IMPORT_PROPER while applying support packages
Dear All,
I am on ECC 6.0(ABAP+JAVA) SR2, SUSE Linux 10 SP1, DB2.
I have successfully applied the kernel patch and started applying the support packages, i have successfully completed applying the ABAP, Basis, BW, HR and other related patches, but i am not sure why i am stuck at the import_proper phase when applying the SAP_APPL patches (SAPKH60008 and SAPKH60009 both in the same queue) and my tp log is as follows
========================================================================================================
START imp all SCD 20081229080538 DDIC sealcpro 20081229080537
INFO: event SAP_IMPORT_START triggered successfully
INFO TBATG CONVERSION OF SCD N not needed DDIC sealcpro 20081229080537
START tp_getprots SCD P 20081229080539 DDIC sealcpro 20081229080537
2EETP000 sap_dext called with msgnr "1":
2EETP000 db call info
2EETP000 function: db_setget
2EETP000 fcode: RT_SETB (65535)
2EETP000 tabname: TRBAT
2EETP000 len (char): 0
2EETP000 key:
2EETP000 retcode: 1
1AETP000 exit in function texitnow
ERROR: EXIT(16) -> process ID is: 5319
STOP imp all SCD 0016 20081229080602 DDIC sealcpro 20081229080537
=========================================================================================================
And also when i look at the Support package import logs they show that
TEST IMPORT
Import ABAP Dictionary Objects and
ABAP Dictionary Activation phases ended with return code 4
But i dont think this can give any problem.
I have tried to import from the phase where it stopped, but all of a sudden i get disconnected from SAP and get an error message saying that NO CONNECTION TO THE DATABASE, then when i check for the processes for dw and db2 there are process already running.
I had to start SAP and only then i was able to connect to the SERVER again.
Can you please help me on this..
For any more information plz let me know
Thanks and regards
HunkyDear Balaji,
Thank you very much for the reply...
I deleted the import request in the STMS and wi ran the RDDIMPDP and RDDMNTAB reports and restart the SPAM, but this time the SPAM immediately stopped, but i am still connected to the system and the error which i got earlier (database connection error ) is now not occuring.
But otherwise also i noticed that i get the following ABAP Dump while this error is triggering
===================================================================
DBIF_REPO_INTERNAL_ERROR
Internal error when accessing program "CX_SY_OPEN_SQL_DB=============CP ".
An unspecified internal error occurred in the SAP-internal
database interface.
For further analysis the SAP system log should be examined
(transaction SM21).
Check the entries in the developer trace of the relevant work process
(transaction ST11).
Attempted to access component "LOAD" of program
"CX_SY_OPEN_SQL_DB=============CP ".
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_REPO_INTERNAL_ERROR" " "
"SAPLSTPA" or " "
==========================================================================
Based on this error i searched few notes and got the below results 309583 and 132383 but these are not for my release.
So i request you to kindly help me on this as i am running out of time in delivering my server.
Waiting for all the valuble replies
Thank you in advance
Regards
Hunky -
RSM2052 error after import Support Package SAPKW70022 in MSSQL Data Load
Hi;
I imported Support Package SAPKW70022 but after import data load from MSSQL gives error RSM2052.
How can I solve my problem.
Best Regards.Hi,
I think I have to stop extraction process in LBWE or R/3. Can anybody tell me how to stop extraction process.
Thx & Regds,
SGK -
Report painter report does not exist after applying support pack
Hi,
I have created report with the help of report painter for FI.
Also created transaction code for the same.
After applying the support pack, while testing I got the error that
program in the transaction code does not exists.
How to search that program and where or I need to create the same program again?
Thanx in advance.
-UmeshThe reason could be having (1) invalid characteristics value or (2) have not properly defined the General Data Section, most likely (1) in this case.
Either way, go to t-code GRR2 to change the report.
In the report row or column, is there an Element (the labels in red color) that does not make sense?
It could still have the correct label names, but double-click and go into "Record Types (from your error message)". Be sure to have the correctly define values attached to each Characteristics.
If all above seems okay, try (From top bar, select) Edit --> General Data Section. Think of this section as the "header data" of the report.
Good luck
AY -
Best way to apply Support Packages to Solution Manager
We have a single instance dual stack for SOLMAN 4 running. I want to apply Suppot packages, I need some suggestion what would be the best way to do this, the way I am thinking to proceed for this is -
1. Do kernel and igs upgrade thru JSPM
2. Apply ABAP Support packages and then,
3. apply JAVA support packages
Is it possible to apply ABAP support packages with JSPM?
Any suggestion would be helpfulPatch your abap stack first then the java...
No, its not possible to pacth abap with JSPM (JAVA Support Package Manager)
Regards
Juan
Maybe you are looking for
-
R835-P56x motherboard Part number
Toshiba R835-P56X Part number PT324U-008003 I need a motherboard but there is no part number on original motherboard. would anyone know the part number or know where i can go to find out what it is? Its a I5 systemboard Thank you Solved! Go to Soluti
-
Installation CS4 Master Collection (Trial): Photoshop doesn't start
After installing the following products from the CS4 Master Collections DVD (as 30 days trial versions): - Acrobat 9 - InDesign - Illustrator - Photoshop and everything (what is possible) else UNCHECKED I get the following error at the end of the ins
-
Don't restore form values on tab restore
A part of my website uses a lot of forms on a single page. On the page, you can filter the items (each item has his own form) and alter them. A single entry looks like this: [name] [select for status] [other select]. Other significant things are that
-
Visual fortran calling a c function in visual studio
Hi, I am running Windows 8.1 with Visual Studio Prof. 2012. I have installed Visual Fortran also. Now I wanted to make a solution with two projects one for Visual Fortran and one for C, and be able to call a C function from within the Fortran. Can s
-
Hi I am trying to import photos into iPhoto using two Panasonic cameras both Lumix (DMC TZ3 and DMC FZ30). Worked in the past no problem, I upgrade system when prompted and am running Mac OSX 10.6.8 with iPhoto 9.1.5. When I attach cable from camera