After approver reject RFx response(QUOT), is that possible tho open back?

Hi Gurus,
We are now implementing SRM 7 EHp 1 and with workflow in RFx creation and evaluation. During RFx evaluation, once the approval reject the quotation and the status will turn into REJECTED. Is there anyway to open back the quotation in order leave it as rejected.
There is few scenario we facing at the moment.
1. 5 lines item. Bidder A been partial award 3 items and Bidder B partial award 2 item. Both quotation route to approval in awaiting approver status. If approval reject bidder A quotation and put a remark to purchaser that bidder B should get the full award (5 items). Is that possible to handle by the system?
2. 5 lines item. Bidder A been partial award 3 items and Bidder B partial award 2 item. Both quotation route to approval in awaiting approver status. The approval reject bidder A and accept bidder B. Could system handle the 3 items back to the sourcing cockpit?
Best regards,
Wind

Hello Wind,
Kindly refer to the thread Re: Quotation in Release Rejected Status, how does the purchaser can review it? , to solve your issue here.
As per the standard functionality delivered with SRM 701, purchaser user should be allowed to view the details for the Rejected RFx response and he also he will be provided with the Undo Reject option to re-submit the response for approval to the purchasing manager.
Hope this helps you.
Best Regards,
Rahul

Similar Messages

Create Rejection Note after approval/rejection using Ztranscation.

Hi Experts,
I have a requirement to create a Rejection Note when a document is rejected using a SAP Transaction.
I mean I would call a Z Transaction to show the details and have the approve/reject buttons on which the approver can action them directly.
Now, when rejected, I would like to advance with dialog and immediately pop up to capture the reason for rejection.
Please advice.

Hi Vijay,
You can use the std task TS20000139 to enter rejection text.
Or
Try as given in this link below.
http://wiki.sdn.sap.com/wiki/display/ABAP/ApprovalDecisiononApproveorRejectwithReasonsor+Comments
Regards,
Raj

TS1702 After downloading iOS7, I have an app that won't open and won't delete. How can I get rid of it?

I have tried re-downloading, but don't believe the app is available as I cannot find it.

Similar issue:
Recently updated to ios7 and then updated some apps. A few of them have, theoretically, updated. I can only open them from the App Store by clicking open (where it used to say install and now it says open). However, the actual app on the home screens are shaded and say "Waiting..." as if they are still currently downloading. It has been two days. I tried installing a free app (as some have suggested), this did not work. I tried turning phone on and off. I cannot delete these apps form my phone because when you hold down to get the jiggly apps and then the little "x" to click to close/delete the app, these apps don't have the "x."
Any thoughts/suggestions??

RFx Response Approved / Rejected notification

Hello SRM Experts,
We are currently experiencing some complications with our e-mail notification for approved/rejected RFxs, some are unable to receive the e-mail. We have checked the possible configuration for this like transaction SU01 etc., we might missing something.. Any inputs?
Thank you!

Ranjan Sutradhar wrote:
Hi Jerome,
> Have you checked if the outputs are generated for the failed mail output in SOST tcode?
>
> Thanks and regards,
> Ranjan
Hi Ranjan,
Thank you for the quick reply.
Yes we have already checked tcode SOST, but the mail didn't reach SOST . It's weird because it happens only on selective users...
Thank you!

RFX response Workitem in UWL of approver even if it is closed

Hello experts,
In a scenario, if the RFx response is closed, that is 'transaction completed'. But still the work item appears in UWL of the approver and 'Approve' button is enabled. Can anyone tell me how to close the RFx response, so that the work item does not appears in UWL of the approver?
Regards,
Yayati

Hello,
what is the WI workflow status?
Regards.
Laurent.

How do you hide RFx responses on SAP Sourcing 10.0?

Hi gurus,
I'm new on SAP Sourcing 10.0. I want to know where can I go to write a script that will enable me to hide RFx responses. I want to write a script that will hide the RFx Responses tab so that all collaborators assigned to the RFx will not see the RFx responses unless they are assigned to scoring.

Why don't just use standard functionality in Page Customisations?
You can Hide/Unhide a Tab with Dimension Field <%USER_GROUP%> and Group Reference.
It's a clean, standard way and guaranteed to work and not break anything.
Bogdan Toma

Pricing in SRM for RFx response

Dear SRM Experts,
We are using sourcing scenario in SRM 7.0 EHP 1 and are inviting bids from international as well domestic vendors.
Bids contain varoious price components apart from the basic price like deleivery cost, insuarance, packing and forwarding etc. Based on this price components we wanted to calculate the landed cost of the material.
Since SRM only has one calculation schema 0100 for mainatenance group 01QU ( RFx response) i wanted inputs on how difference schema can be mapped into SRM for calculating the net price from RFx response.
Any pointers on the same will be apperciated.
Regards,
Darshan

Hi Ramki,
First of all i am really honoured to have reply from you. I have referred your book many a times during the implementation as well as support phase.
Presently we are working for one of the client wherein the requirement is that the responses received from various bidders having values against different pricing condition needs to compared before the L1 bidder is finalized and PO is placed. Landed cost of material needs to be calculated for the Bids received from international as well as domestic bidders which would have different conditions.
I have created various condition types in the maintanace group 01QU (RFx responses). So that those conditions can be populated in RFx at time of publishing and we can receive the values against those conditions in response. There is need to calculate the landed cost of material at the time of comparison report generation.
Using IPC i think wont be feasible because anyways we need to calculate landed differently for domestic as international vendors. Also from stability perspective this is not advisable.
I would request if i can get pointers to map this requirement.
With Regards,
Darshan

SRM RFx Response Undo Accept/Reject Action

Kindly we use SRM 7 EHP1 , when I try to find out undo accept or undo
reject button on Screen but there is no button for undo action
Is that available in SRM 7 EHP1 ? and if it is available why is not
shown ? or need any configuration ?
Please advise ASAP

Hi
1687814 - Rfx response is not editable after Undo Accept for purchaser
is not correct note , my question is
when I try to find out undo accept or undo
reject button on Screen but there is no button for undo action

POR (Purchase Order Response): Approve/Reject buttons not functioning

Hi folks,
In SRM 5.0 extended classic scenario, a POR is sent to EBP from SUS. The POR is outside tolerances so it triggers workflow -WS14500019. When a user goes into their Approval Inbox they have the option to Approve or Reject the POR using the Approve/Reject icons.
When a user clicks on either the Approve or Reject icon, a message appears at the bottom of the screen:
"Work Item is been Processed, Please Wait"
When this message disappears the work item is not processed and remains in the Approver's inbox unprocessed.
If anybody has any suggestions it would be greatly appreciated.
Regards,
Pat

Hello Nagarajan,
Thanks for the response. I have realised that the Approve/Reject buttons should not be used with PORs. I am still a little unsure as to how it is supposed to work though. Take the scenario below:
A buyer orders a quantity of 10
The vendor responds with a quantity of 7 which is outside the tolerances and goes to approval
If the buyer does not accept the response but wants to request 10 again what should they do?
1) If they copy the POR to their PO a changed PO is sent to the Vendor with a quantity of 7.
2) If they copy the PO to the POR but untick the header and item levels in the POR, the SUS PO remains in a status of Confirmed so the vendor will ship the goods.
Which options above is most suitable when the Buyer wants to request the 10 again? Option 2 and then to manually change the PO to a quantity of 10?
Regards
Pat

Once RFX response approved the other responses should delete

Hi All,
We have one requirement, Using SRM 7, RFX is sent to 4 bidders, all of them sent the responses, now Buyer has decided to go one of the Bid, once the RFX response is approved all the other responses should get rejected and the notification should sent to them.
Did any one already using this scenrio please help how to proceed.
Regards,

Hi,
Ricardo mentioned correctly.
I've tested this scenario, you need to accept which ever you want and reject remaining bids.
Other wise for the remaining bidders status will be shown as submitted not rejected.
Regards,
Krish

When does Apple will take unlocking for Mexico (Telcel) iPhones seriously? Because That carrier give thousands of evasive responses to people that ask for an unlocking service after their contracts are done...

When does Apple will take unlocking for Mexico (Telcel) iPhones seriously? Because That carrier give thousands of evasive responses to people that ask for an unlocking service after their contracts are done...

This is the best invention to make people buy new devices. Why am I asking this to Apple???? Maybe I´m wrong and I have to ask to Microsoft or maybe Google? There is a law that obligates all carrier companies to unlock those devices that are off contract. But even with this, this company denies to do it. They suppor their idea in the fact that that law was published on Oct´12, so brilliantly they have solved to unluck only those devices bought after that date..... I have all those evidences but all are in spanish.....

Expense request getting errored out after Expense approver rejected

Dear Experts,
I am facing issues where employee expense request is getting errored out when the expenses approver reject the Request.
We are using a workflow to move this request.
Once the employee submitted the expense request. We are having 2 level approval of his/her. Supervisor at the 1st and Expense approver at 2nd level
In the 2nd phase the Expense approver rejecting the travel request to make modifications, however the rejected request is NOT routing back to the employee.
Any assistance highly appreciated

Hi Venkat,
Many thanks for your reply
The required work flow is properly configured. I can see after rejection it has been routed to the employee again.
However after rejection its getting errored out, any idea on the possible reasons, does er approver is selecting or inputing any incorrect parameters.
Regards,
Tamiz

Sales Order (Returns) for Approval / Reject

Hi,
I have a Sales Order of Credit Only Order type.
Existing Custom Workflow
When the Customer Service creates Sales Order of Order Type Credit Only, it will got to AR dept for Approval/Reject.
If the AR dept rejects, then a Notification will flow to Customer Service with Rejection comments.
Required Logic
Once Customer Updates and saves Sales Order, Customer Service should have an option to send SO back to Approval to AR dept.
Could any one give me the logic.
Thanks

Thanks for your quick response Ajay.
I am aware that I can move it to unrestricted stock but I would lose my link to the RMA sales order. Correct?
We currently are not using split valuation.
Any other suggestions?

Can't Create Contract From RFx Response (SAP SRM 7.0)

Dear Expert,
Could you help me,
i have create rfx, response the rfx and accepted the rfx response.
After i have accepted that RFx, i would like to make a contract from this RFx response. Via menu Create Contract.
But this error is show up.
Error application is coming up.
20111020
RHESAS
093450
sapgsd
http://sapgsd.garuda-indonesia.com:8011/sap/bc/webdynpro/sapsrm/wda_l_fpm_oif
OBJECTS_OBJREF_NOT_ASSIGNED
Access via 'NULL' object reference not possible.
Method: PST95E57RQRHC49FBLT5QTJBJT9Z of program /1BCWDY/NC67WCWB50U4IGZ40GZ1==CP
Method: IF_WDR_VIEW_DELEGATE~WD_DO_MODIFY_VIEW of program /1BCWDY/NC67WCWB50U4IGZ40GZ1==CP
Method: DO_MODIFY_VIEW of program CL_WDR_DELEGATING_VIEW========CP
Method: MODIFY_VIEW of program CL_WDR_VIEW===================CP
Method: DO_MODIFY_VIEW of program CL_WDR_CLIENT_COMPONENT=======CP
Method: DO_MODIFY_VIEW of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW=================CP
Method: EXECUTE of program CL_WDR_MAIN_TASK==============CP
Method: IF_WDR_RUNTIME~EXECUTE of program CL_WDR_MAIN_TASK==============CP
http://sapgsd.garuda-indonesia.com:8011/sap/bc/webdynpro/sapsrm/wda_l_fpm
Do you have any idea to solve this issue?
(we are activate Procurement for Public Sector Functions )
Regards,
Rhesa Syahrial

Hi All,
I have solved this issue.
I missed the configuration in Partner Grouping schema ID.
Regards,
Rhesa Syahrial

Workflow in Project server 2013 online not going particular stage after Approval

Hi All,
i have created workflow using sharepoint designer 2013 for project server 2013 online. and i have also set the approver after the first stage. when i create a project using this workflow, project is created successfully and the approval task also go for
a approval to specific user. and i have set the property that after approval it has to go on specific stage. but the problem is when user approve the task it shows approved but my stage in workflow is remain same. it is not going to any stage.
i don't know why this type of problem is occur.
FYI, i have created same workflow for Project server 2013 on premise(Which is installed in my server) and
it is working fine but when i want to deploy this workflow in
project server 2013 online its giving error.
so please help me to solve this type of issue.
Thanks

I am also experiencing issues with this. After the approval task is completed, the Workflow gets cancelled with the following message
RequestorId: 60d96368-4cb4-b059-8086-604972a92e60. Details: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary. at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context)
at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager
bookmarkManager, Location resultLocation)
All other desired workflow actions work as expected. Emails are sent, project is moved from stage to stage, however as soon as the workflow approval task is completed, either Approved or Rejected, the Internal Status is changed to Canceled and the
workflow fails.
What is interesting is when the Approval task is completed, the approver will receive an email notification that the task was CANCELLED or DELETED....
not COMPLETED, which is what would be expected.
Has anyone seen this - any potential resolution?

After approver reject RFx response(QUOT), is that possible tho open back?

Similar Messages

Maybe you are looking for