After aquiring an image how do you convert or save it as an HDF file

I am using LV to acquire an image. Once I grab the image I need to save it as an HDF file so I can do some further analysis. Has anybody done this if so could you explain how to go about it?

There is a LabVIEW toolkit that will enable you to edit and save files stored in HDF (Hierachical Data Format) You might consider reading the following knowledgebase:
http://digital.ni.com/public.nsf/websearch/CB8A7F8090900F6C86256CC700033816?OpenDocument
Will Denman
Application Engineering
National Instruments

Similar Messages

How do you convert the audio from a mpeg4 video file to mp3?

How do you convert the audio from a mpeg4 video file to mp3 format?

Probably the easiest way to do this is to download a free media convertor. Most will be able to convert video into audio files.

How do you convert an iMovie Progect to a QuickTime file

I am trying to upload a iMovie file or a iDVD file, which ever makes more sence, to my .mac account. How do I do this? I was thinking of publishing a video on my home page or on YouTube either way I need some help

Using Your Movies on the Internet
http://www.apple.com/ilife/tutorials/imovie/im4-4.html
as a start, for YT I recommend these settings:
http://karsten.schluter.googlepages.com/youtubeuploadsettings

How do you convert channels.dvb to channels.conf

Title says is all. How do you convert the kaffeine file channels.dvb to a channels.conf file which can be used by mplayer.
The winterhill transmitter in the UK is now totally digital, since the change over I've not been able to get BBC channels properly in mplayer. The receiver is a Freecom DVB-T USB. I've manually edited the uk-WinterHill file with the transmitter info to update it and used it to create a channels.conf file.
scan /usr/share/dvb/dvb-t/uk-WinterHill > /home/~/channels.conf
This picked up pretty much all the channels & I can tune into BBC channels but receive no picture. I've googled a bit and it seems other people have this problem too and they think it's a problem due to the increased power of the signal after the change over to digital. I've tried a variable attenuator which did no good.
I've now found that kaffeine can scan for and find the BBC channels AND it can also play them back properly. So the theory about the signal strength being too much for the freecom sticks attenuator is probably a load of guff, at least in my case.
The data for BBC One from the kaffeine channels.dvb is:-
TV|BBC ONE|101(2)|102(eng),106(eng),|0|4168|4168|Terrestrial|802000|0|v|-1|-1|-1|-1|8|-1|-1|-1|45|105(16)(1)(1)(eng),||9018|-1|0|
The same data from the mplayer/scan channels.conf is:-
BBC ONE:802000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:101:102:4168
I really don't want to keep kaffeine installed and any links or info that would help convert these channel data files would be greatly appreciated. Seems there are ways to convert them the other way round, but so far I've found nothing to do it fron channels.dvb to channels.conf
Last edited by Nixie (2009-12-17 08:42:56)

Do you want to capture a single frame of the video as a separate image? You can play the video full screen in QuickTime, pause it at the appropriate frame and take a screenshot using shift-command-3.
Matt

HOW DO YOU CONVERT IPHOTO 8.1 TO APERTURE FILE FORMATT

how do you convert iphoto 8.1.2 photos to aperture file formatt?

I believe this is still possible if the iPhoto library has not been up graded.
No joy, Frank. This is what I get, when I try to import an older iPhoto Library into Aperture 3.4.3 using "File > Import > Library":
Aperture 3.4.x insists on the library being converted to 9.4.x. To be able to import earlier iPhoto Libraries you would have to fall back on Aperture 3.2.x; temporarily install a second, older Aperture version, create a new Aperture library with this version, import the iPhoto Libraries, then open this Aperture library in Aperture 3.4.3 to convert it to a current version.
bertpa, how many iphoto photos are we talking abourt? If you are having several iPhoto libraries with thousands of edited photos, it really would be worth it to upgrade to iPhoto 9.4 to convert your libraries. iPhoto 9.4 will convert your library to a format with Master-version pairs like aperture uses. If you import this to Aperture, you will be able to import each edited image as a single image with two versions (original and edited)- importing from previous iPhoto versions you would be importing each edited image as two separate images - an edited image and the original. This would be wasteful, if you have many photos in Aperture, and it would cause a lot of additional work to get these duplicates sorted out. But if you only have a handful of iPhoto images, launch iPhoto and use the "File > Export" command to export your photos from iPhoto to a folder. You will have to do it twice - once to export the originals and once to export the edited versions. Then import your exported iPhoto photos into Aperture.
Regards
Léonie

How do you convert 60fps to 24fps in FCP X

How do you convert 60fps to 24fps in FCP X for or do I need to figure out the percentages and use that optical flow tool, because I have tried to figure it out but there is a blurry trail when I use the optical flow tool.

Thanks Tom, so can you do that after it's already been imported? I am out shooting this afternoon, but I will look for it when I get back to the studio. I appreciate the help, I haven't had a lot of time to spend relearning FCP, so any help I can get to make my life easier is super appreciated.
Cheers,
Matt

How do you convert a ages file to a jpeg file?

How do you convert a ages file to a jpeg file?

If your .pages file pre-exists, you can open it directly in Preview. With thumbnails enabled in Preview, you can subsequently select the page you want to export as an image.

How can you convert a PDF File into a picture format for uploading?

How can you convert a PDF File into a picture format for uploading?

If you have Acrobat 11, you'd select: File > Save As Other > Image
and select one of the available image formats.

How do you convert a PDF document to a word document ?

How do you convert a PDF document to a word document ?

I just noticed that you added a few more details and it seems like the problem is that part of the conversion is not working. Would it be possible to share the file with me so that I can forward it to the team that owns that service? My email address is [email protected]
Thanks!
Pat

How do you convert a PDF to Word or Excel in Acrobat 9 Pro?

How do you convert a PDF to Word or Excel in Acrobat 9 Pro?

Refer to Acrobat 9 Help PDF (installed with Acrobat 9 is installed).
Review the discussion for Exporting PDFs in Chapter 5 of this Help PDF.
The PDF is also available on Adobe's site.
http://help.adobe.com/archive/en_US/acrobat/9/professional/acrobat_pro_9.0_help.pdf
Good to know is that the Acrobat 9.x product family passed into End of Support mid-year 2013.
Be well...

How do you convert a jpeg file into word document so i can edit it?

How do you convert a jpeg file into word document so i can edit it?

http://office.microsoft.com/en-us/mac-word-help/training-edit-pictures-in-office -for-mac-2011-RZ103709558.aspx

How do you convert an Autocad drawing into a pdf with Acrobat X Standard?

How do you convert an Autocad drawing into a pdf with Acrobat X Standard?

Something to try -
Having installed Acrobat Standard you have the Adobe PDF virtual printer installed.
From your authoring application do a "file-print" and select the Adobe PDF printer rather than the attached local or network printer / plotter.
Be well...

How do you convert a jar file into a java file, ?

how do you convert a jar file into a java file ?
I am new to Java ,but have a little experience in C++ and Visual Basic.
I want to edit and maybe create my own mobile games that are written or converted into jar files.
At the moment I am using Java NetBeans , and Easy Java( the java pad).
However the only solution I tried was to open the JAR file in winrar and see that its made up of png picture files,
midi music files and class files. Unfortunately when I uncompressed the JAR file , there was NO java file to be seen and the JAVA editors Do not show the class file like a Java file. So why is there no extension Java file in the mobile JAR game ?

801283 wrote:
how do you convert a jar file into a java file ?You generally don't. There exist decompilers, but if you're meant to have the source, you should either have it because you are the author, or you should be able to get it from the author.
I am new to Java ,but have a little experience in C++ and Visual Basic.Does that experience include turning .exe files into C++ code? Because that's the equivalent of what you're asking
I want to edit and maybe create my own mobile games that are written or converted into jar files.Eh?
Are you saying you want to take existing games and modify them? If the creators allow you to modify their source, then they'll provide you with that source (the .java files). If you're allowed to add things but not modify, you don't need .java files. Just documentation, which, again, the creators should be providing.
Or are you saying you want to create your own games and distribute them in jar files? If so, there's no need to turn jars into .java.
However the only solution I tried was to open the JAR file in winrar and see that its made up of png picture files,
midi music files and class files. Unfortunately when I uncompressed the JAR file , there was NO java file to be seen and the JAVA editors Do not show the class file like a Java file. So why is there no extension Java file in the mobile JAR game ?Why would you expect there to be one?

How do you convert a quotation into a purchase requisition?

How do you convert a quotation into a purcahse requisition?

Hi Ganesh
But from ME51N in shows selection varaint it show RFQ for creation of Requisition but when you drop the RFQ to header for creation , it is not working..
Chek again.
Kishor
Hi Christopher
See Purchase requisition creation can happen without vendor and price details as well.
so once you have finalised your vendor and price ,you can put the vendor and price details in PR and then PR can go further for approval...there will be some manual work ,,but I do not think any more option available.
hope its logical,.
Kishor

After downloading Flash 9, how do you get it to work with Apple iMac OS X 10.3.9 ?...

a.
After downloading Flash 9, how do you get it to work with Apple iMac OS X 10.3.9 ?...
b. , c.
What's the best browser to try?... Firefox?... Opera?...
Why?...
d.
What directory/ies contain the downloaded Flash 9 files?...

a. Your browser and the flash player should work together. You should not have to do any thing
b. Camino is the best for 10.3.9 Why? You can access apples me.com through Camino on 10.3.9 but Safari will not work with me.com. Also all the internet plug ins work with camino
c. hard disk - library - internet plug ins

After aquiring an image how do you convert or save it as an HDF file

Similar Messages

Maybe you are looking for