After attaching the headset to the audio jack, i get sound from the laptop speaker

after attaching the headset to the audio jack, i get sound from the laptop speaker

This worked for me as well. Great find! I have gigabyte ep45-ud3r motherboard and I was getting all sound through external speakers except itunes was playing the sound out of the digital output instead of the speakers. I could see this when I went to control panel > hardware & sound > manage audio devices. I did the repair as described above and now I have sound in iTunes.

Similar Messages

  • I only get sound from the computer's speakers even though I put in headphones

    I have for a while now had the problem that I only get sound from the computer's speakers even though i plug in the headphones, I have rebooted the computer but still the same problem occurs. So i thought there might be someting wrong in the settings, when i open the soundsettings and plug in my headphones nothing happens, usually I believe there should be a text appearing that says that the sound is now going to headphones, am I right? any how, it still just sends the sound out to the speakers and there is no option to send it else where then "soundflower 2ch and soundflower 16ch".
    I do have an external sound card, for music recording, that goes through USB, and when i plug that in i get the option to send the sound to that device and also to recive sound and i can also choose if i want to sent it to the computer's speakers. So could it be someting wrong with the headphone jack?

    Good day!
    Thank you for writing to the Dell Community Forum.
    Boot into the System Bios and make sure that Onboard Devices- Integrated Audio is On. Then exit the System Bios saving the change. Once back into Windows, open the Device Manager and make sure that ADI1983 HDA appears under Sound devices. Then re-test the rear green audio jack #4 using headphones. Also, reply to this post with the service tag of the system sent via private message so that I can look into the details of the system and assist you better.
    Have a great day ahead.

  • I've connected my ipad to my TV via hdmi but cannot get sound. Is there a way to get sound from the TV?

    I'd like to get sound from the tv for my keynote presentations. Is there a way to do this via the hdmi connection? Or do I need to connect an 'audio-out? Thanks in advance for your help

    the hdmi should transfer both sound and picture
    http://store.apple.com/us/product/HFQL2VC/A/moshi-mini-displayport-to-hdmi-adapt er-4k?fnode=a8e08a2bb3c16bf3cd606aecff68b12c10fe327cd7b063c9bbc492e57158bbfa0778 d5b941eb2a8c1c5f2e25e51cf7b82e193c9a722651b3fc2694996f7b5281b8bf4338c46284247b76 ccce6907fa6caee062d974158ee4d0336fca558384426e7a6c6cbf3ee58c8f53f8db53c9ef91
    Supports multi-channel digital audio output on compatible devices
    make sure your ipad is not muted
    make sure you volume is not all the way down
    make sure audio play out of the ipad when not connected to the hdmi adapter
    if you did and it don't work then it's likely an issue with the connetor
    or the tv or it's settings

  • I cannot get sound from the web, you tube, etc, however, my speakers are on, my itunes play sound?

    I cannot get sound from the web, you tube, etc, however, my speakers are on and my itunes play sound? What gives?

    Hi,
    Try the following.
    First, download the Flash uninstall utility on the link below and save it to your Desktop.
    Flash Player Uninstaller.
    When the download has completed, close all browser windows and run the uninstaller.  After this has completed, restart the notebook.
    Next, download and install Firefox and then using Firefox, download and install the latest version of Adobe Flash.
    Close all browser windows before running the Flash installer.
    Launch Firefox and see if Youtube videos etc play Ok - if they do, close Firefox, open IE and click on the same Adobe Flash link above to get a prompt to install the ActiveX component.  When done, restart IE.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • I am getting no sound from all of the game apps on my ipad. i.e. angry birds, scrabble, but I can still get sound from the ipod app.  also I can hear the games if I am using earphones

    i am getting no sound from all of the game apps on my ipad. i.e. angry birds, scrabble, but I can still get sound from the ipod app.  also I can hear the games if I am using earphones

    You have your mute button on.  In Settings check to see if you have Lock Orientation checked or Mute checked on the right hand side.  If you have Mute checked, all you need to do is click the mute button above the volume control buttons on the upper right hand side of your iPad.  If you have Lock Orientation checked in settings, you double click your home button and the most recent apps will appear.  Swipe your finger to the right until the Mute icon appears on the left side.  Touch it and you will unmute system sounds.

  • I want to link my Mac Mini through my independent hifi system, which forms part of my home tv system which is the monitor I am using with the Mac Mini. The hdmi cable I am using comes from the receiver of the tv. I cannot get sound from the Mac Mini. Do

    I cannot link my new MacMini with my TV's sound system. It's a Pioneer screen & receiver with an independent Pioneer Amp. The Mac Mini does not pick up the sound through the hdmi cable, so how do I get sound going through the MacMini so I can appreciate the music and films I want to hear. Do I need another piece of Apple kit? I have seen 'Express' on Apples web site. Surely I dont have to pay for this as well?
    I used to have an Apple TV box which had a seperate audio connection from my Pioneer Amp and it worked great.
    Help will be appreciated

    The Mac Mini is going to be used for an Internet connection on the Pioneer Plasma/receiver so I can also play stored films from a seperate hard drive. The receiver has an HDMI connection which I have connected the Mac Mini too. the picture is fine, but there is no sound. I have checked the 'sound' settings on the Mac Mini and it registers the Pioneer PDP receiver is connected but states it has no audible connection?

  • Only getting sound from the left earphone

    I changed headphones to make sure its not a headphone problem but there is no sound from the right earphone. If I press the connector deeper into the socket then both the earphones work fine, however, I have to keep it pressed down with my finger. Does not work of its own accord. I have had it for 13 months now...any tips anyone?

    I have had a the same problem, only its my left headphone that doesnt seem to work.
    I've tried using dozens of headphones and speakers but the left speaker or headphone never works.
    I have found a cheecky way of getting some sound through however. If you push the ipod jack up at an angle to the roof of the ipod jack hole then you should find that it works. Just press down on the ipod jack (nib bit close to the speaker hole).
    Only problem with this is that you have to hold the ipod to listen to it and it can become quite tiresome. As soon as you let go it will stop sound going through that speaker.
    I did also find out that this happens to quite a few people and most commonly is caused when dirt (e.g. sand) gets into the ipod jack hole.

  • Anyway to get sound from the main window only?

    If you have mulitple quicktime windows playing is there anyway to get sound from only one when you make it the main window?

    Open QuickTime Player 7.6.6.
    Command-, (comma key) to open the Player preferences / General tab
    Sound: Play sound in frontmost player only.

  • Audio Stream player : getting informations from the source

    Hello everyone,
    I'm trying to create a webRadio player, wich different sources.
    On a click on a button, the player plays the corresponding flow. I would like to display some informations, like : current music, url, description, ... I think it's possible to have all those informations, because when I play my .pls files in my audio player (winamp), I've got them.
    Here is my code corresponding to this part :
    private function playSound(e:MouseEvent):void {
                try {
                    //Sound release
                    pSound.close();
                    pChannel.stop();
                    //Flow construction
                    pSound = new Sound();
                    pChannel = new SoundChannel();
                }catch (e:Error) { trace(e.name, e.message); }
                var tmpFlow = new URLRequest(e.currentTarget.name);
                pSound.load(tmpFlow);
                //using pChannel to play the sound allows the source changement on a click on another button
                //Without it, the different sources just surimpose themselves
                pChannel = pSound.play();
                displayInformations();
            private function displayInformations() {
                trace(pSound.id3);
    My trace() commaned gives me [object id3Info]
    The problem is I'm playing the sound from a url source, not a mp3.
    Any idea ?

    No, this is not what I am saying.
    If MP3 container has id3 tags - you can read them. Also, if MP3 container has metadata and you stream sound with NetStream - you can read it as well. I am not sure about cuepoints though - never done it.
    If you are dealing with ohter than MP3 format - you will need to do custom work to read bytes and offsets, etc.

  • Dell OptiPlex 3020: I only get sound from the internal speakers

    I have a brand new Dell OptiPlex 3020 running Windows 8.1. I am able to hear through the internal speakers, but I cannot get external speakers or headphones to work - I've tried both the jacks on the front and back.
    The microphone on my headset works correctly, but I still hear only through the internal speakers.
    Advice?

    Good day!
    Thank you for writing to the Dell Community Forum.
    Boot into the System Bios and make sure that Onboard Devices- Integrated Audio is On. Then exit the System Bios saving the change. Once back into Windows, open the Device Manager and make sure that ADI1983 HDA appears under Sound devices. Then re-test the rear green audio jack #4 using headphones. Also, reply to this post with the service tag of the system sent via private message so that I can look into the details of the system and assist you better.
    Have a great day ahead.

  • I set up two identities, the default & one more. How to get mail from the second one?

    I have two different e-mail addresses that I want to get mail from. So the main/default one worked just fine. So I went to options, account settings, identities and set up the second one. But this second one doesn't appear on the start page and still when I Get Mail, it only brings in the mail from the default one. So what do I do?

    You do not place your second account in Identities.
    You go to the Menu Bar and select '''File-New-Existing Mail Account''' and add it there.
    No Menu Bar? Press the alt key.
    If using the '''AppMenu button''', click that and select''' New Message-Existing Mail Account'''

  • Must disconnect headphone from front jack to get sound from rear jack

    p7-1446s, win 8.1- 
    Amplified speakers connected to "Rear Speaker Out (black) port"
    Headset-Headphone/Microphone connected to front panel ports.
    No matter how I enable/disable  "Playback(s)" from Sound Control Panel, I can not get Rear Speaker sound
    unless I physically disconnect the front headphone.  Also, Sound will  always comes through headphone
    no matter what Playback output is selected.
    Other than that, sound is OK.
    Any suggestions?

    Hello al_paxanax,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand you are having issues with your audio coming out of your headset no matter the setting you choose on your computer running Windows 8.1. I would recommend that you ensure your audio driver is up to date. Your system uses the IDT High Definition Audio Driver for Windows 8.1. If this does not work you can also try the audio troubleshooter from Microsoft and see if that can resolve your audio issue.
    I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • I have an Iphone 3.  How do I..can I..mute the phone's mic when I have a headset plugged in?  The headset worked but I got feedback and echo from the phone's mic.

    Hi

    This article should help you get your photos and videos transferred over   The iPhone should be listed next to the local hard drives in My Computer. Right click on it there and then choose the import option.  The article will also help you if the iPhone isn't recognized by Windows at all.

  • I am trying to get sound from the MIDI output from an analogue synth (Prophet 08) as an External MIDI track in Logic Pro 8

    I route the signal via an Edirol UA-25. I open a new project, new track and specify it as an External MIDI track. While the indicator light next to the Mute button blinks when I press a key, there is no sound.
    Can you help me, please. I have read the manuals, to no avail...

    David,
    Learning is not a bad thing, I'm just saying what you thought MIDI did is in error, you're not the first.
    Here's an article explaining what MIDI is and how it works, it probably seems less than you thought it capable of but the fact is, since it's standardization in 1983 it completely revolutionized electronic music. By the Way, the designers of the Prophet 8 (Dave Smith & Sequential Circuits) had a lot of input into the MIDI protocol, in fact, if you had to say one company/person came up with the basics of MIDI it was Sequential Circuits. They also came up with the first polyphonic, fully programmable analog synth. I had a very basic MIDI studio at the end of 1984.
    http://entertainment.howstuffworks.com/midi1.htm

  • Powerpivot Error on Refresh -- "We couldn't get data from the data model..."

    I'm using Excel 2013 and Windows 8.1.  I have a spreadsheet I've been using for over a year, and I've just started getting this error message when I try to refresh the data.
    "We couldn't get data from the Data Model.  Here's the error message we got:
    The 'attributeRelationship' with 'AttributeID' - 'PuttDistCat9' doesn't exist in the collection"
    Any idea how I can fix this problem?  I haven't changed anything related to that particular attribute.  All the data is contained in separate sheets in the workbook, so there are no external sources of data.
    Thanks.
    Jean

    Thanks for all the suggestions.
    I found a slightly older version of the spreadsheet that still refreshes properly, so I don't think I have any issues with the version of Excel or Power Query.  (I've had this same error before, and I believe I applied the hotfix at that time.)
    I think this problem started after I updated a number of the date filters in the pivot tables.  I haven't made any changes to the data model, and the only updates I've made were to add data (which I do all the time), and to change the date filters on
    the pivot tables.
    As suggested, I added a new pivot table querying one table (the table with the attribute that shows up in the error message), and it worked fine.  I can also refresh this pivot table.
    Then I tried adding a pivot table which went against several tables in the data model (including the table in question).  The pivot table seemed to return that data properly.  However, when I tried to refresh it, I got the same error message ("we
    couldn't get data from the data model..."). 
    Dany also suggested running the queries one at a time to see which one is in error.  Without checking all the pivot tables, it appears that any which use the table "HolePlayedStrokes" generate the error (this is the table with the attribute
    mentioned in the error message).  Pivot Tables without that particular table seem to refresh OK.  Unfortunately, that is the main table in my data model, so most of the pivot tables use it.
    Any other suggestions?  I'd be happy to send a copy of the spreadsheet.
    Thanks for all the help.
    Jean

Maybe you are looking for