After attempting an Itunes update to my lap top computer I received an error message and cannot access my Itunes program or library.  Is there a way to fix this without starting over?  I still have I tunes on my Iphone 6 but ut does not contain all

Error Updating ITunes onto lap top.  No access

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

Similar Messages

  • I updated to maverick, and maybe it's a coincidence but my left shift key doesn't work unless i really press it down.  Is there any way to fix this without bringing it into the Genius Bar?

    i updated to maverick, and maybe it's a coincidence but my left shift key doesn't work unless i really press it down.  Is there any way to fix this without bringing it into the Genius Bar?

    Plugins usually are installed externally to Firefox. However, you can disable them in Firefox so that Firefox does not use them.
    SearchReset is supposed to automate the task of resetting certain preferences, but you still can edit them manually if necessary.
    '''''Address Bar Search'''''
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the filter box, type or paste '''keyword''' and pause while the list is filtered
    (3) Right-click '''keyword.URL''' and choose Reset. This should restore Google as the default for address bar search.
    Does that work?
    '''''Search Box'''''
    Usually it works to choose your preferred search engine from the drop-down. To remove an unwanted search engine plugin, usually the Manage Search Engines... choice at the bottom of the drop-down takes care of it.
    Do either of those work?
    There might be another way to hijack that search box; I think some of the other frequent responders probably are more familiar with it than I am.

  • I keep getting a pop up asking for my voicemail password.  I can simply press cancel and it goes away, but it happens frequently and often during a text or email.  Is there a way to stop this?  I don't even have a voicemail password.

    I keep getting a pop up message asking for a voicemail password.  I can simply touch cancel and it goes away.  Put it pops up quite frequently during texting, chatting or email.  Is there a way to stop this?  I don't even have a voicemail password.

    Contact your carrier; they are the only ones who can resolve this for you. Use the Carrier Luke,
    "Fun with the Sun, MEta"

  • I updated to Firefox 4 and ever since it won't open. It says the process is running but no matter how long I wait it won't open the browser and restarting or ending the process and trying again doesn't work either. Is there any way to fix this?

    I thought it might be a compatibility issue with Windows Vista but the same problem happened on a computer with Windows 7. I'm not sure if the Windows 7 problem was resolved, though.

    You probably have other problems but for a start right click on your task bar and click on Start Task Manager. In "Applications" if Firefox is shown, click on "End Task". In "Processes" if Firefox.exe is shown, click on "End Process" and ignore the warning and click"End Process" again. Wait for a few seconds then start Firefox in the usual way. There is a chance that this may solve your problems.
    If not, you probably will need to do a complete uninstall and re-install. If you can't start Firefox you could try starting in Safe Mode - Hold down Shift key as you double click on the Firefox icon>ignore the page that opens>and Continue. If you've been able to open Firefox you could work through this Troubleshooting Procedure -
    https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
    If at any stage you are not making progress, report back here for best advice on an Uninstall/Re-install which is quite likely to be necessary.

  • After upgrading to Firefox 3.6.11, the browser does not see my previous browsing history, and does not save new history. places.sqlite is still in place. Is there a way to fix this without erasing previous history?

    Bookmarks are still being updated and saved. Recently closed tabs, Recently closed windows are being recorded as they should. I have a single .json file on my profile directory, search.json. I don't know if there should be another one for the browsing history. It looks like some index file for the history database was lost or corrupted, or re-created as an empty file. places.sqlite-journal has zero bytes; places.sqlite-stmtjrnl has 37 kbytes, date 2008-07-15.

    I kept trying to solve this problem, and after a few unsuccessful attempts, the only thing which worked was uninstalling Firefox (keeping all my customizations) and then reinstalling Firefox 3.6.10 (which is apparently no longer available at mozilla.org, but which I could easily find at filehippo.com). The unsuccessful attempts I made were: (1) Install Firefox 4 beta; (2) uninstall Firefox 4 beta, Firefox 3.6.11 (in both uninstalls, keeping my customizations), and reinstall Firefox 3.6.11.
    So right now I am stuck at Firefox 3.6.10, or I will loose access to my browsing history. If anyone at Mozilla.org is reading this, I would suggest taking a look at this issue to see if it can be reproduced and fixed. I am running Windows XP (fully updated), Brazilian Portuguese version.

  • When I try to open iTunes, I get an error stating that the program can't start because MSVCR80.dll is missing from my computer. I don't have my original iTunes disc to reload. Is there any way to fix this without the iTunes disc?

    Also, I'm due for an upgrade to the new iPhone.  Should I just wait for my new iPhone?

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • When I try to connect to App Store,I get an error message stating "cannot connect to iTunes Store.  I show 3 bars on wifi connection

    When I try to connect to App Store, I receive an error message stating, "cannot connect to iTunes Store.  I show 3 bars on my wifi connection?  Can someone help...why if I tap App store, does a iTune error message display?

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    Finally, if the Restore doesn't work, let the battery drain completely.  Then recharge for at least an hour and Restore again.

  • HT4972 I have an Iphone 4 and each time I try to update to iOS 7.0.6 I receive an error message after attempting the update.  I have gone through the update process about 3 different times, and each time I get the error message after about 30 minutes.

    I have an IPhone 4 and each time I try to update to iOS 7.0.6 I receive an error message.  I have gone through te update process about 3 times and each time I get message saying there was an error and it was unable to update. 

    What is the error message, and the error number specifically? You can look it up here: http://support.apple.com/kb/TS3694

  • I lost the ability to use wifi after the 8.02 update.  Is there a way to fix this?  I've already tried resetting network.  Turned the phone off and on. Nothing is working and now I have to run on just data.

    I lost the ability to use wifi after the 8.02 update.  Is there a way to fix this?  I've already tried resetting network.  Turned the phone off and on. Nothing is working and now I have to run on just data.

        csdwarf,
    So sorry to hear about the trouble with Wi-Fi! Let's get that working the way it should. Could you provide us some more details regarding where this breakdown occurs? Are you having trouble with turning Wi-Fi on or connecting to your Wi-Fi? Are other devices connecting to your Wi-Fi without issue?
    BrianP_VZW
    Follow Us on Twitter @VZWSupport

  • My Time Machine and backup drive are not recognized and do not work after this update...is there a way to fix this?

    After I upgraded to Yosemite, my MAC Time Machine backup drive is no longer recognized and the process freezes when I try to re-install the drive from the drive's software.  Is there a way to fix this?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • I made a video of our summer vacation on imovie. It's over an hour long. When I try to share it, the audio syncs incorrectly at about the 15 minute mark and is off for the rest of the movie. Is there a way to fix this? I think I have imovie 09.

    I made a video of our summer vacation on imovie. It's over an hour long. When I try to share it, the audio syncs incorrectly at about the 15 minute mark and is off for the rest of the movie. Is there a way to fix this? I think I have imovie 09 with all the availbable updates.

    If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
    If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
    http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
    This one will create the form, database and send out the emails...
    http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
    The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
    http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

  • HT4623 My iPhone wont update to iOS 6.1.3 I receive an error message after about 6 minutes

    My iPhone wont update to iOS 6.1.3 I receive an error message after about 6 minutes

    If you're having issues doing the update directly on the phone, try using iTunes on your computer to complete the update.
    Ensure you've done a backup & imported any photos or videos from your camera roll first, just in case something goes wrong.
    ~Lyssa

  • Airport time capsule 2 TB. All is connected and Wi-Fi is working but light still flashes amber rather than solid green. I have tried to reset but this still happens. Is there a way to fix this or do I need to?

    Airport time capsule 2 TB. All is connected and Wi-Fi is working but light still flashes amber rather than solid green. I have tried to reset but this still happens. Is there a way to fix this or do I need to?

    You want to see a green light on the Time Capsule.
    Once you have set up the Time Capsule initially, a flashing amber light indicates that the Time Capsule has a message for you....possibly about a network condition or notice of an update that is available.
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the amber dot and another window will appear to provide the current status....along with suggested actions to remedy the flashing amber light.

  • I still have a balance on my giftcard but it will not let me reddem it

    i still have a balance on my giftcard but it will not let me reddem it help!!!!11

    Once an iTunes Gift Card has been redeemed, the balance is fully transferred to your account and the card itself no longer has any value. It is not necessary to re-enter your card code for every purchase. Each time you make a purchase, funds will be automatically deducted from the store credit balance on your account until the credit is used up.
    To refresh your visible credit balance, sign in to your account in the iTunes Store. Your updated credit amount appears next to your account name.

  • I have just bought an iPhone 5 and it won't sync to iTunes.  It says it needs  iTunes 10.7, which I have downloaded and installed.  I still get the error message and looking at "about iTunes" it says 10.6.3.  What do I do??

    I have just bought an iPhone 5 and it won't sync to iTunes.  It says it needs  iTunes 10.7, which I have downloaded and installed.  I still get the error message and looking at "about iTunes" it says 10.6.3.  What do I do??

    Perhaps check to see if you're accidentally running two different versions of iTunes. There's some information on troubleshooting that in the Opening iTunes section of the following document:
    Troubleshooting iTunes installation on Mac OS X

Maybe you are looking for