After ATV3 software update 7.0.1, ATV3 no longer listed in Airplay menu in iTunes12

So I was glad to see that Apple updated the ATV3's to 7.0.1 this Monday, along with the iOS 8.1 for iPad/iPhone. This seemed to have fixed the dreaded ethernet bug which airplay refused to work or even wake the ATV3 device.
Until today...
I open up iTunes to play music to the living room ATV3 (which has software 7.0.1), and I get an orange airplay icon in iTunes 12. It cannot wake the device... I haven't checked my iPads yet. Now, the Living room ATV3 isn't listed in the airplay list. Anyone have this issue? Software 7.0.1 seemed too good to be true, and this breaks again. Everything was working fine since Monday's update, and it's totally broken this afternoon.
Thank goodness I didn't update the other two ATV3 devices. #AppleFixYourStuff

I have the same exact problem and same exact symptoms. I tried uninstalling and re-installing and no luck. Did you ever find a solution?

Similar Messages

  • Macbook will not boot up after running Software Update (Couldn't fix it)

    Hi there,
    I also have been experiencing some problems after running Software Update (Security update + Java) a couple of days ago. Similarly to Jandaf (http://discussions.apple.com/thread.jspa?messageID=9000023) I have only the gray start up screen + Apple logo + gear wheel constantly rotating. Based on the information provided in this forum I have tried some procedures which didn't solved my problem so far. Below I describe I have tried:
    1) I have booted using the installation DVD and run the disk utility. When performing the First Aid/Verify Disk I found some errors ('Invalid node structure'). But I couldn't fix the problem using disk repair (same problem 'Invalid node structure' 'Volume check failed'.
    2) I also tried to boot in single user mode (command + s) to run fsck -fy. It didn't work. I got the following message (last 4 lines):
    CSRHIDTTransitionDriver::probe: -s
    CSRHIDTTransitionDriver::probe: booting in single user .. do not match
    Extension "com.apple.driver.AppleUSBTCKeyboard" has no kernel dependency.
    Extension "com.apple.driver.AppleUSBTCEventDriver" has no kernel dependency.
    3) When trying to boot in safe mode. I got a grey screen with the following message:
    'You need to restart your computer. Hold down the power button for several seconds or press the Restart button".
    4) I also tried to 'Archieve & Instal'. Again no success. After reading the DVD the action is terminated because some errors (does not specify).
    5) I also tried the 'German Medicine' (http://discussions.apple.com/message.jspa?messageID=8728797#8728797) (i.e. Connect the 'problematic MacBook' to my old G4 via firewire and reinstall the 2009-001 update). Again no success. The G4 cannot mount the MacBook hardrive.
    I don't know what to do any more.
    A) Can I resuscitate my old system? If yes how?
    B) If not, can I at least save the data I have in my old HD?
    C) Is it possible to format and reinstall the OS or is this this computer doomed?
    Apologies for writing so many questions but I'm really freaking out!
    Thank you.
    B.

    Hi BDAqua,
    I did as you said and got a firewire backup drive (Seagate - FreeAgent Desk 500GB). I tried to make a carbon copy of HD but it seems that the copy had some problems. Below I report both the CCC and console logs:
    1) "Cloning method: Backup everything
    Delete items on target that aren't on the source: No
    18:23:39 Enabling ownership on the target volume...
    18:23:50 The target volume has ownership enabled.
    18:23:50 The target volume has Access Control Lists enabled.
    18:23:50 Authenticating...
    18:23:50 Initiating synchronization engine...
    18:23:51 Cloning...
    18:31:20 rsync: readdir("/Applications/Utilities/Audio MIDI Setup.app/Contents/Resources/French.lproj"): Input/output error (5)
    19:04:41 rsync: readdir("/System/Library/Components/AudioCodecs.component/Contents/Resources/Fr ench.lproj"): Input/output error (5)
    19:05:41 rsync: readdir("/System/Library/CoreServices/Menu Extras/IrDA.menu/Contents/Resources/French.lproj"): Input/output error (5)
    19:06:01 rsync: readdir("/System/Library/CoreServices/Menu Extras/User.menu/Contents/Resources/French.lproj"): Input/output error (5)
    19:07:05 rsync: readdir("/System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSBC DCECMData.kext/Contents/Resources/French.lproj"): Input/output error (5)
    19:10:13 rsync: readdir("/System/Library/PrivateFrameworks/Assistant.framework/Versions/A/Resou rces/French.lproj"): Input/output error (5)
    19:50:10 rsync error: some files/attrs were not transferred (see previous errors) (code 23) at /Volumes/Home/Users/bombich/Development/Bombich_Software/rsync-3.0.5pre2/main.c (1047) [sender=3.0.5pre2] (51)
    19:50:11 rsync: Some errors were encountered during the backup., Error code: 51
    19:50:14 Sync Engine warnings: (
    "rsync: readdir(\"/Applications/Utilities/Audio MIDI Setup.app/Contents/Resources/French.lproj\"): Input/output error (5)",
    "rsync: readdir(\"/System/Library/Components/AudioCodecs.component/Contents/Resources/F rench.lproj\"): Input/output error (5)",
    "rsync: readdir(\"/System/Library/CoreServices/Menu Extras/IrDA.menu/Contents/Resources/French.lproj\"): Input/output error (5)",
    "rsync: readdir(\"/System/Library/CoreServices/Menu Extras/User.menu/Contents/Resources/French.lproj\"): Input/output error (5)",
    "rsync: readdir(\"/System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSB CDCECMData.kext/Contents/Resources/French.lproj\"): Input/output error (5)",
    "rsync: readdir(\"/System/Library/PrivateFrameworks/Assistant.framework/Versions/A/Reso urces/French.lproj\"): Input/output error (5)",
    "rsync error: some files/attrs were not transferred (see previous errors) (code 23) at /Volumes/Home/Users/bombich/Development/Bombich_Software/rsync-3.0.5pre2/main.c (1047) [sender=3.0.5pre2]"
    2) "Mac OS X Version 10.4.11 (Build 8S2167)
    2009-03-01 10:30:14 +0100
    2009-03-01 10:30:21.962 SystemUIServer[213] lang is:en
    Mar 1 11:20:32 Bs-Home-Mac /usr/sbin/ocspd: starting
    Mar 1 11:38:25 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
    Mar 1 12:46:40 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
    Mar 1 13:54:55 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
    Mar 1 15:03:13 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
    Mar 1 16:11:31 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
    Mar 1 17:19:46 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
    Main starting
    2009-03-01 17:47:20.393 Skype[313] SkypeApplication::init called
    2009-03-01 17:47:21.554 Skype[313] SKInitDebugLogging
    2009-03-01 17:47:46.169 Skype[313] SkypeSound::setAudioDeviceUID: cannot find audio device with UID (null), trying to use default system output device instead
    2009-03-01 17:47:47.208 Skype[313] SkypeSound::setAudioDeviceUID: cannot find audio device with UID (null), trying to use default system output device instead
    Starting the process...
    2009-03-01 17:48:36.186 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
    2009-03-01 17:48:36.367 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
    2009-03-01 17:48:37.367 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
    2009-03-01 17:48:37.369 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
    2009-03-01 17:59:16.450 Skype[313] SkypeSound::setAudioDeviceUID: cannot find audio device with UID (null), trying to use default system output device instead
    Mar 1 17:59:19 Bs-Home-Mac crashdump[355]: Skype crashed
    Mar 1 17:59:20 Bs-Home-Mac crashdump[355]: crash report written to: /Users/bernardolima/Library/Logs/CrashReporter/Skype.crash.log
    Mar 1 18:23:50 Bs-Home-Mac authexec: executing /Applications/Carbon Copy Cloner.app/Contents/Resources/helper_tool
    Mar 1 18:28:01 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
    Main starting
    2009-03-01 18:41:03.154 Skype[393] SkypeApplication::init called
    2009-03-01 18:41:12.433 Skype[393] SKInitDebugLogging
    Mar 1 19:36:16 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
    Mar 1 19:55:54 Bs-Home-Mac mdimportserver[480]: -[ABAddressBook sharedAddressBook] Can't ABACQUIREFILELOCK Framework/AddressBook/ABAddressBook.m:2746
    Mar 1 19:57:12 Bs-Home-Mac mdimportserver[480]: * +[NSUnarchiver unarchiveObjectWithData:]: extra data discarded
    Mar 1 19:57:12 Bs-Home-Mac mdimportserver[480]: * +[NSUnarchiver unarchiveObjectWithData:]: extra data discarded
    Mar 1 20:44:34 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
    Mar 1 21:52:51 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
    Mar 1 23:01:07 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor"
    Due to my lack of knowledge I can't judge how bad this is. But I can tell you that every time I read the word bad in the log it scares the s*** out me.

  • IPad mini will not let me access mail after latest software update, 6.1.2, seems to want me to sign in, but whenever I type my Id ad password it just says that the mail account already exists.. Still can't open my mail!

    iPad mini will not let me access mail after latest software update, 6.1.2, seems to want me to sign in, but whenever I type my Id ad password it just says that the mail account already exists.. Still can't open my mail!
    Help would be appreciated.

    PhotogYogi wrote:
    I Have the same issue on a brand new iPad mini 2. My battery is only lasting up to 5 hours. I went on chat with Apple last night and they said my battery is fine and its a Safari issue. I'm literally losing 1% every 3-4 minutes. I tried recalibrating my battery, signing out of iCloud, shutting off all locations, turning off background app refresh, restoring network settings, restoring all, and finally restoring from iTunes with no luck. This is just awful. I got this iPad so I could use it on my long flight for a trip I have coming up, and unfortunately, it's not going to last that long, plus I'm concerned about how many times i will be recharging my battery because of this since battery's do have a life cycle dependent on the number of charges. This is frustrating and needs to be fixed ASAP and addressed by Apple.
    By the way, Apple told me to bring my device to the Apple Store because it's still under warranty. That's great and all, but I'm going to waste my time if there is no fix for this issue.
    Ok so you want Apple to address the problem, but yet you don't want to take it to them just in case they can't fix it? What if they can fix it? Complaining here certainly won't fix it.

  • ITunes won't open after downloading software update.  Macbook Pro OSX10.6.8  Simple solution?

    iTunes won't open after downloading software update.  Macbook Pro OSX10.6.8  Simple solution?  And by the way, this is apparently a common problem and Apple has completely failed to warn in advance or offer a quick straightforward solution - used to be a good company, but it's becoming just another crappy screw-the-consumer corporation.

    It would help to know versions here.  I'm guessing your update put an older version of something into a place where a newer version of something iTunes put in there existed.  Updating an earlier OSX version to 10.6.8 is still only updating to system software that was issued several years ago.  If you are running some slightly newer version of iTunes issued subsequent to 10.6.8 and you just updated to 10.6.8 you may have put in an older version of something iTunes uses.  Anyway, I'm guessing here until we know exactly what you did.

  • After my software update, my calendar no longer syncs w my PC

    After my recent update to IOS6, my calendar no longer syncs with my PC, yet my iPod touch is fine.

    Make sure you are running the latest version of iCloud control panel for Windows (ver. 4) by running Apple Software Update and installing any available updates.  If you install an update, restart your PC, then try calendar syncing again.
    If that wasn't the issue, try force-closing the calendar app on your iPad (double-tap the home button, swipe up on the calendar app, tap the home button again), then reset your iPad (hold the power and home buttons at the same time until you see the Apple logo, then release).  After it restarts, try adding a new calendar event and see if it appears on your PC now.
    If not, try going to Settings>iCloud on your iPad, tap Sign Out, choose Delete from My iPad and provide your password when prompted (your data will still be in iCloud).  Then reset your iPad again and test calendar syncing.

  • My ipod 4th gen can't be recognized by itunes after itouch software update

    my ipod 4th gen can't be recognized by itunes after itouch software update. I have reset both PC and itouch to no avail

    http://support.apple.com/kb/TS1538

  • After running Software update, I can no longer run, open, sync or use iTunes in any way. PLEASE what happened??

    I was running the newest version of Snow Leopard, and after running Software update, I can no longer run, open, sync or use iTunes in any way. PLEASE what happened?
    I really regret that I said "OK" to Software Update message... after Software Update of these updates on 7-26-11:
    Migration Assistant Update for Mac
    Mac OSX 10.6.8 Supplemental Update
    Safari
    iTunes
    Remote Desktop Client Update
    Now I get a message:
    iTunes cannot be opened because of a problem
    Check with developer to make sure iTunes works with this version of Mac OSX. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OSX.
    Process:         iTunes [5092]
    Path:            /Applications/iTunes.app/Contents/MacOS/iTunes
    Identifier:      com.apple.iTunes
    Version:         ??? (???)
    Build Info:      iTunes-10315501~1
    Code Type:       X86 (Native)
    Parent Process:  launchd [111]
    Date/Time:       2011-07-26 12:08:18.568 -0500
    OS Version:      Mac OS X 10.6.8 (10K540)
    Report Version:  6
    Interval Since Last Report:          504736 sec
    Crashes Since Last Report:           20
    Per-App Crashes Since Last Report:   13
    Anonymous UUID:                      B8B5EE28-970A-4E79-949B-EA2DD6E6DAA2
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread:  0
    Dyld Error Message:
      Library not loaded: @loader_path/libgnsdk_musicid.1.8.2.dylib
      Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
      Reason: image not found
    Binary Images:
    0x8fe00000 - 0x8fe4162b  dyld 132.1 (???) <A4F6ADCC-6448-37B4-ED6C-ABB2CD06F448> /usr/lib/dyld
    Model: Macmini3,1, BootROM MM31.00AD.B00, 2 processors, Intel Core 2 Duo, 2.26 GHz, 2 GB, SMC 1.35f1
    Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x90), Broadcom BCM43xx 1.0 (5.10.131.42.4)
    Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
    Network Service: Ethernet, Ethernet, en0
    Serial ATA Device: Hitachi HTS543216L9SA02, 149.05 GB
    Serial ATA Device: OPTIARC DVD RW AD-5680H
    USB Device: External HDD, 0x1058  (Western Digital Technologies, Inc.), 0x0704, 0x24100000 / 2
    USB Device: Hub, 0x0424  (SMSC), 0x2507, 0x26400000 / 2
    USB Device: iMic USB audio system, 0x077d, 0x07af, 0x26440000 / 4
    USB Device: Hub, 0x0424  (SMSC), 0x2502, 0x26470000 / 3
    USB Device: Deskjet D4300 series, 0x03f0  (Hewlett Packard), 0x1f04, 0x26471000 / 5
    USB Device: GD-0608-U, 0x056a  (WACOM Co., Ltd.), 0x0021, 0x04700000 / 4
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0x04500000 / 3
    USB Device: Hub in Apple Pro Keyboard, 0x05ac  (Apple Inc.), 0x1003, 0x04300000 / 2
    USB Device: Apple Optical USB Mouse, 0x05ac  (Apple Inc.), 0x0307, 0x04310000 / 6
    USB Device: Apple Pro Keyboard, 0x05ac  (Apple Inc.), 0x020b, 0x04330000 / 5
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x06100000 / 2
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x8216, 0x06110000 / 5
    FireWire Device: unknown_device, Unknown
    FireWire Device: d2 DVDRW FW, LaCie, Up to 400 Mb/sec

    Same thing happened to me and I get the same error message. These are the programs that don't work
    mail
    keynote
    pages
    all Office 2011 programs
    safari

  • Macbook will not boot up after running Software Update

    My MacBook will not boot up after running Software Update (Security update + Java?) earlier today. I have only the gray start up screen + Apple logo + gear wheel constantly rotating. I have tried restarts several times and tried to start up from my original system DVD - this makes no difference.
    I called Apple support, tried resetting the power and PRAM - still no difference. He had no knowledge of other problems reported; although I note recent post may have same issue.
    I cannot get an appointment at my Apple Store before Monday.
    Any suggestions?

    Still no success. When I hold down the option key when powering up I get the hard disk icon plus arrowhead (only). When clicking the arrowhead it goes to the gray screen + apple logo+ rotating gearwheel.
    This happens both with DVD in slot and without DVD. the DVD image is not coming up on screen. When I start up without DVD the hard disk icon appears promptly. When I start with DVD in the DVD is spinning for a short period before the hard disk icon appears. On clicking the arrowhead to hard disk icon the DVD spins again for a while then stops. Apart from the DVD spinning, both situations result in gray screen + apple logo+ rotating gearwheel.

  • When i open itunes the warning itunes Library.itl appears with the following message. ..."it cannot be read because it was created by a newer version of itunes. after checking software updates we have the lastest version.  What to do?

    when i open itunes the warning itunes Library.itl appears with the following message. ..."it cannot be read because it was created by a newer version of itunes. after checking software updates we have the lastest version.  What to do?

    Perhaps check to see if you're accidentally running two different versions of iTunes. There's some information on troubleshooting that in the Opening iTunes section of the following document:
    Troubleshooting iTunes installation on Mac OS X

  • HT1414 after a software update the device is not working properly and can not open any website.

    I can operate it properly after an software update . Now no website cannot be opened and cannot get emails. Main thing cannot go to tunes and app store .

    First Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414

  • I'm having all kinds of problems since loading Lion and I really wish I hadn't bought it yet. Even after the software update today, 1. my modem still won't work, 2. Photoshop Elements produces muddy photo prints, etc.  Anybody at Apple listening?

    I'm having all kinds of problems since loading Lion and I really wish I hadn't bought it yet. Even after the software update today, 1. my modem still won't work, 2. Photoshop Elements produces muddy photo prints, 3. View preferences in windows don't hold,  etc.  Anybody at Apple listening?  Anybody else out there having these kinds of problems?

    10.7 was horrible unstable so I waited until 10.7.1 and tried it again. Well I have to say that it is still a defective OS. I am reverting to Snow as we speak from my carbon clone copy.. This is really the worst OSX I have ever used. It gives me random Kernel panics for no reasons, unstable airport and hundreds of small issues that are just not necessary. For instance I can't use QuickTime in Lion to trim a videoclip ( the UI goes mad and the trimslider becomes inoperable and hangs the Player window ) while in Snow it is no problem. Itunes gives me crackling sound when the equalizer is turned on, Graphical glitches in Photoshop, games crashing, Preview.app not working with some pdfs, so I need Adobes reader which I never used before.. It is definately not ripe for mass usage. Might 10.7.2 or 10.7.3 fix it, but not yet.
    * and just for the records : the hardware is absoltely ok. Because in Snow it works as it should. ( So many Lion fanbois are talking : "your Ram is defect", defintely NOT. - Lion is defect! ).
    Shame on you Apple.
    Message was edited by: Sjazbec

  • Programs won't launch & finder crashing after recent software updates

    Finder and most programs won't launch after a software update. I was able to run Cocktail and repair permissions. I've restarted a few times, and ran disk utility from the start up disk to no avail.
    Any suggestions?
    thanks

    http://www.thexlab.com/faqs/multipleappsquit.html

  • Motion 3 still freezing after after MBP Software Update 1.1

    I have just started to use Motion 3 with my new Hi Rez 17" MBP and had a couple of occasions where Motion would freeze completely with the only option being to turn off the MBP and reboot it. I checked the Motion discussions and found that a lot of people had been having trouble with Intel MBP's and Motion after software update 1.0. I was pleased to hear that software update 1.1 was supposed to fix the issues and duely downloaded and installed it.
    However, in the past 3 hours I have been trying to work on a motion project (a pretty simple one at that) and motion would have FROZEN AT LEAST 6 TIMES. Disappointed to say the least!
    Has anyone else with a similar MBP experienced the same issues with Motion 3 after installing software update 1.1? As it is Motion is next to impossible to use and because the app is not crashing I can't even send off a report to Apple.
    Cheers
    Pete

    Hi Jose,
    Although we don't seem to be any closer to a fix, its good to know I'm not the 'Lone Ranger' on this issue.
    A bit more info, in case somebody has any ideas. Since my post, at the suggestion from the guys I bought the MBP from I ran the Extended Hardware Test on the OSX install CD in case I might have some issues with something like the MBP's memory (I am running the full 4GB of RAM by the way). It came up completely fine.
    Another thing is that I noticed today that there is a new software update available - the 'MacBook MacBook Pro Software Update 1.0'. It doesn't say in the notes that it has anything to do with any motion fixes but I found the naming convention a bit strange. Maybe this is normal but just because they stick 'MacBook' in front I would have thought Apple would have given a different version number considering MacBook Pros have already had a software update 1.0. I was wondering if I try to run software update 1.1 again whether this might have the desired effect but I think I am probably clutching at straws.
    Any other feedback is greatly appreciated.
    Cheers
    Pete

  • After the software update to my iPhone 5, i cannont access Facebook. What do I do now?

    After the software update to my iPhone 5, i cannont access Facebook. What do I do now?

    Thats great thanks for your help! Do I have to take anything with me to the Genius Bar other than the iPhone 5 itsself? Also, am I correct in thinking you have to make an appointment into the Genius Bar and cannot just turn up in the store?
    Thanks

  • HT1338 After a software update, how do I get my camera to work on my Mac Air?

    After a software update, how do I get my camera to work on mu MacBook Air?

    Launch the app that does what you want to do with the camera:
    OS X Mavericks: Use your Mac computer’s built-in camera.
    Message was edited by: EZ Jim
    Mac OSX 10.9

Maybe you are looking for