After authentication request

how long does a product take to show up in your product part of adobe id only I downloaded a trial version then authenticated it but don't see it anywhere?

I downloaded it as trial version, decided it would do what I wanted, inserted product key and clicked authenticate. which just vanished from the screen. The software seems to be working fine (photoshop elements 12) but if I look at adobe id its not listed in my products which is why I asked if anyone knew how long it takes to go in there?

Similar Messages

WLC4402 and ACS receives double authentication request with MS client

I have a 4402 wlc, ACS 3.3 and we use Microsoft client with WPA-TKIP/MSChapv2.
We hardly connect to the WLAN, but after 10 minutes we are disconnected.
We are migrating from LEAP to PEAP, so we create two profiles in the WLC.
LEAP connects good, but PEAP fails.
In the ACS log I can see a double authentication request.
Any idea?

but that doesen't solve the problem on the ACS right?! On the ACS I have to configure the device with the ip address and the EAP type (ex. "Cisco Aironet" for LEAP or "Cisco IOS/PIX" for PEAP), and how do that?
Thanks for your feedback

Accessing j_username after authentication

Using Weblogic Server 8.1, I am authenticating a user with FORM based authentication.
Posting j_username and j_password to j_security_check.
Is there a way to access the j_username variable after authentication? After
the user is authenticated, I need a unique identifier to match that user to his/her
data in another database. Is there anything in the request/response headers or
in the session?
Jay

"Jay Wright" <[email protected]> wrote in message
news:3f81ebc0$[email protected]..
>
>
Using Weblogic Server 8.1, I am authenticating a user with FORM basedauthentication.
Posting j_username and j_password to j_security_check.
Is there a way to access the j_username variable after authentication?After
the user is authenticated, I need a unique identifier to match that userto his/her
data in another database. Is there anything in the request/responseheaders or
in the session?
I would ask in the weblogic.developer.interest.servlet newsgroup.

HT201363 I am receiving an authentication request at launch on my desktop. I am unable to satisfy the password and then it freezes. Uninstalled and re-installed yesterday and have same issue. I think it is a podcast feed, but cannot delete

I am locked out of my Itunes. When I launch on the desktop I receive an authentication request from www.podshow.com that I cannot satisfy with password. Actually i don't ever remember giving them a password. When I cannot satisfy the password it locks up my screen. When I went to the website listed I could not satisfy the password to even get onto the site. I am pretty sure it is a feed, how can I delete it and get back into my itunes? I uninstalled and re-installed yesterday- same issue

Hi,
This forum is for general questions and feedback related to Outlook for Windows. Since your question is more related to Outlook for Mac, I'd recommend you post your question to the Outlook for Mac forum:
http://answers.microsoft.com/en-us/mac/forum/macoutlook?tab=Threads
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

The KDC encountered duplicate names while processing a Kerberos authentication request in a Domain controller server

HI
we have a sharepoint farm and in domain controller server, this error is in event viewer
Log Name:      System
Source:        Microsoft-Windows-Kerberos-Key-Distribution-Center
Date:          9/15/2014 10:44:15 PM
Event ID:      11
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      XXXAPP01.xxxportal.com
Description:
The KDC encountered duplicate names while processing a Kerberos authentication request. The duplicate name is HTTP/XXXWFE01.xxxportal.com (of type DS_SERVICE_PRINCIPAL_NAME). This may result in authentication failures or downgrades to NTLM. In order to prevent
this from occuring remove the duplicate entries for HTTP/XXXWFE01.xxxportal.com in Active Directory.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Kerberos-Key-Distribution-Center" Guid="{3FD9DA1A-5A54-46C5-9A26-9BD7C0685056}" EventSourceName="KDC" />
    <EventID Qualifiers="49152">11</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-09-15T19:44:15.000000000Z" />
    <EventRecordID>131824</EventRecordID>
    <Correlation />
    <Execution ProcessID="0" ThreadID="0" />
    <Channel>System</Channel>
    <Computer>XXXAPP01.xxxportal.com</Computer>
    <Security />
</System>
<EventData>
    <Data Name="Name">HTTP/XXXWFE01.xxxportal.com</Data>
    <Data Name="Type">DS_SERVICE_PRINCIPAL_NAME</Data>
    <Binary>
    </Binary>
</EventData>
</Event>
adil

Hi adil,
Service principal names (SPNs) are stored as a property of the associated account object in Active Directory
Domain Services (AD DS). I noticed that you have used setpn –X to identify the duplicate SPN. Please refer to following articles and check if help you to solve this issue.
Event ID 11 — Service Principal
Name Configuration
Event ID 11 in the System log of domain controllers
Please also refer to following article and check if can help you.
The problem with duplicate SPNs
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

J_security_check not redirecting after authentication - in one environment

Hi all,
I have a J2EE web application developed in JDeveloper 10.1.3 which uses JAAS security with a custom authentication provider class. I can configure this is both a windows and unix based OC4J. The windows OC4J is stand alone, the unix one is part of a managed instance (OPMN).
When I deploy to windows, attempts to access a protected resource cause the authentication to fire off perfectly and redirect to the appropriate url after login is successful. Absolutely no problems.
When I deploy to unix with the same configuration, the authentication fires off perfectly but after authentication the redirect attempts to go to Base URL/j_security_check which results in a 404 not found as j_security_check is a logical name and not a real url.
I have tried setting the ocfj.formauth.redirect flag in the oc4j startup options and this did not seen to help. I still got the 404 error.
Can anyone advise me on whether there are any switches or parameters I need to set for the j_security_check redirection to work correctly, or is there something else I need to do in a unix (Solaris) environment to cause the redirections to work?
thanks for any suggestions
Ben

Hi,
you are always seeing the j_security_check in the URL. It seems that this problem is OC4J rekated and I suggest to post the question on the Application Server or the J2EE forum here on OTN
Frank

HT1212 after i request to unlock my iphone it was approved and when i restored still not unlock

can someone help me about my iphone 4s after i request to unlock to att and i was approved when i restored to itunes still nt accepting my t-mobile sim cad

You don't have to restore the iPhone with iTunes after the unlocking has been authorized.
http://support.apple.com/kb/ht5014

Error Event ID 11 The KDC encountered duplicate names while processing a Kerberos authentication request.

I've been noticing The Error with event ID 11 popping up a lot on our domain controllers:
The KDC encountered duplicate names while processing a Kerberos authentication request.
When running setspn -X it says that it found 111 groups of duplicate SPNs. However, when going through the list, it references domain service accounts that are used to run our SQL Server services. We have about 50 remote locations and each of them has 3
machines participating in a SQL mirror (principal, mirror, witness) and they all run the SQL Server service on the same account (1 account per location).
We haven't experienced any issues at all but I was wondering if this could cause problems or if we are straying from best practice. Any advice is welcome. Thanks!

I believe what you should do to follow best practice is to provide unique SPNs for each SQL server, which will also provide increased security, and to do that you must create individual service account for each SQL server so it can associate that
account with that server's SPN.
Here's more on it to help guide you. Read Paul's comments, as well as other suggestions in the following thread:
event ID 11 There are multiple accounts with name MSSQLSvc/xxxxxx
http://social.technet.microsoft.com/Forums/windowsserver/en-US/8df35316-23ba-48ba-aa3e-2249fcbfecbc/event-id-11-there-are-multiple-accounts-with-name-mssqlsvcxxxxxx?forum=winserverDS
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights.

Get Response after HTTP Request

Is it possible to display the response after a http request in forms? the response comes from a kind of reader which sends the reading-result as parameters after a request.

Hello Henry,
We are firing the CREATE/POST operation in the BATCH mode exactly with the same type of PAYLOAD what you have shared here and we are correctly getting response.
1st operation was successful and we have got content with 201 Created Status Code.
2nd operation failed and got 400 bad request with some error.
3rd operation was successful and we have got the content with 201 Created Status Code.
I am unable to replicate your problem in my case. Everything is working fine for me.
Your problem is strange.
Regards,
Ashwin

MOSS 2007; Manage Content & Structure = timeout & authentication request = 401

Hi,
I am having from time to time some issues with an older MOSS 2007 environment. Sometimes browsing to manage Content & Structure ends up in a long thinking process which ends with an authentication request. A Timeout seems to happen. Whatever a user enters...
it ends ip in a 401 error. That does not happen every time, but sometimes. The rest of Sharepoint works well.
Let me first describe the environment. The environment is fully virtualized. The content db is huge - the approx size is about 1 TB. There is only 1 site collection and quite a huge site structure.
The environment as such
2 WFE
1 IDX
1 SQL 2005 Cluster
We use Kerberos for authentication.
The w3wp processes grow to about 1-2 GB.
We have identified that when SQL Cluster fails from one node to the other.. this symptom disappears for a while. I have no clue what this can have to do with the described effects.
An IISRESET on all servers sometimes helps, too.
We cannot identify any errors, but the issue is really annoying.
Any thoughts?

Hi Sven,
I am trying to involve someone familiar with this topic to further look at this issue.
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Daniel Yang
TechNet Community Support

FIxing "nag" authentication request with Adobe

Hi all,
I have a user who keeps receiving an admin password authentication request whenever she tries to open Acrobat, Reader, or CS4. I've run permissions repair from Disk Utility, and I've used my admin logon to clear the screen once. It seems to go away for a bit, but then it's back. Any ideas? It's a Mac Pro Quad-Core running Snow Leopard.

http://www.adobe.com/support/contact/

KDC encountered duplicate names while processing a Kerberos authentication request

The KDC encountered duplicate names while processing a Kerberos authentication request. The duplicate name is RPCSS/HKHVS01 (of type DS_SERVICE_PRINCIPAL_NAME). This may result in authentication failures or downgrades to NTLM. In order to prevent
this from occuring remove the duplicate entries for RPCSS/HKHCS01 in Active Directory.
- What the error means ??
- Why happen ??
- How to fix it ??
Thanks

This is an SPN problem. Having duplicate SPNs will result in Kerberos failures and a downgrade to NTLM authentication. Please run
setspn -x to get the list of duplicated SPNs. Once identified, you need to remove the duplicated ones.
You can also see that:
http://blogs.technet.com/b/askds/archive/2008/06/09/kerberos-authentication-problems-service-principal-name-spn-issues-part-1.aspx
http://blogs.technet.com/b/askds/archive/2008/06/09/kerberos-authentication-problems-service-principal-name-spn-issues-part-2.aspx
http://blogs.technet.com/b/askds/archive/2008/06/09/kerberos-authentication-problems-service-principal-name-spn-issues-part-3.aspx
This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Get Active Directory User Last Logon
Create an Active Directory test domain similar to the production one
Management of test accounts in an Active Directory production domain - Part I
Management of test accounts in an Active Directory production domain - Part II
Management of test accounts in an Active Directory production domain - Part III
Reset Active Directory user password

Conditional branch, after authentication

We have recently implemented a list of passwords that users are not allowed to use. Basic stuff like 1234, abcd etc.
I currently use a custom authentication, so i can quite easily stop a user from changing their password to a dissallowed one. But my issue is that i want to force current users to changer their current password if it breaks the new rules.
I think that i should allow them to authenticate themselves using their current password, and then do a check to see if they should be branched to a specific screen to change their password.
Basically i want to do a conditional branch after authentication.
anybody implemented something similar? or anyone have any ideas?

Create an application process - On Load: Before Header ....
using a similar PL/SQL block like in my case:
BEGIN
   IF NOT custom_authentication_pkg.password_valid (:app_user)
   THEN
      HTMLDB_APPLICATION.g_unrecoverable_error := TRUE;
      OWA_UTIL.redirect_url
                           ('f?p=&APP_ID.:102:&APP_SESSION.:PASSWORD_INVALID');
   END IF;
END;and make this process conditional so it doesn't fire if the current page is in
101 - login page
102 - page for changing passwords
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
------------------------------------------------------------------------------

Authentication Request flood, what can be done about it.

Situation : the IDS in the wlc is reporting Authentication Request flood, attachs around 250 times in 1 hour.
Clearly something is wrong. However, what is the best way to fix the problem ?
- change the rf sensitivty on the controller ?
- change the aggresiveness of the client (barcodescanner)
Additionally, whats the reason of this attack ? bad rf design ?

Forget about the reporting for now.... do you have any issues with your wireless? If not then it can be due to the scanners and how they operate causing the IDS trap. You can download the signature file from the wlc to your tftp server and edit the signature file and them upload it back to the wlc.
You can always try to change the aggressiveness of the clients, but again.. if it is working why take a chance and break it. Check for yourself how the scanners are performing... if you see nothing wrong, then change the signature file.

XP SP3 Never Responds to Migration Assistant Authentication Request

I've been using Macs for years and years and PCs for years and years before that. My parents have hung onto their XP machines as long as they (and I) could stand and it's now time to move them over to Mac. I remember the very painful days I spent migrating my Windows Outlook email and address book over to the Mac and swore I'd never go through that again. So when I heard Lion would have a Windows Migration Assistant that works with Outlook, I was nearly ecstatic. That was some days ago now and I now wish I'd just done the migration the old painful way because I'd be done by now.
I have two systems running Lion, one brand new Mini that came pre-installed with Lion and one brand new 17" MBP that came loaded with Snow Leopard but was immediately upgraded to Lion using the App store. I also have two Dell desktops running XP Pro SP3 that's fully up to date with Windows Update. I have exactly the same experience with Migration Assistant on both pairs of machines:
I download and installed Migration Assistant for Windows
I connect the Mac and the PC via an Ethernet cable
Both computers acknowledge that there's ethernet present.
The Mac can actually browse the XP machine's hard drive.
I run Migration Assistant on the Mac and take it up to the point that it's looking on the network for a computer to connect to.
I run Migration Assistant on the XP machine
The Mac now sees the XP machine in Migration Assistant
I select the XP machine and continue to the authentication step
The Mac spits out an authentication code
The XP machine appears to be waiting to hear from the Mac
Everybody waits for everyone else
Two hours go by
Nothing ever happens.
So, I tried a few things:
I rebooted everybody and that changed nothing.
I tried it over and over for two days and that changed nothing.
I tried reversing the order of steps 3 & 4 above, no difference in the outcome.
I tried connecting the two computers via USB, but they never saw each other.
I called Apple tech support. The first guy reviewed the steps with me and suggested very nicely that I call Microsoft (LOL). I asked him to escalate the case and he sent me to someone else who did actually seem to know what he was talking about. That person said I should give the XP machine up to 20 minutes to notice the authentication request from the Mac. That's why step 10 is in there above.
So if anyone has any suggestions, please let me know.

Same issue here.
I want to migrate from a Windows XP SP3 too, but just to see if it depends on the operating system, I also tryed to migrate from another laptop with Windows 7 Pro and it fails in the same way.
Under a temp directory in Windows there's a SystemMigration.log with some details that may be useful to the support service. When the migration assistant starts on Windows it logs several activities related to user data scanning:
mercoledì 27 luglio 2011 13.33.39: The working directory is C:\Programmi\File comuni\Apple\Windows Migration Assistant
mercoledì 27 luglio 2011 13.33.39: The current OS version is Microsoft Windows NT 5.1.2600 Service Pack 3
mercoledì 27 luglio 2011 13.33.39: The current MA version is 1.0.0.32
mercoledì 27 luglio 2011 13.33.42: Bonjour version is 1180500
mercoledì 27 luglio 2011 13.33.42: SlingShot: Pipe name is: honPC_xqjjzcpxst
mercoledì 27 luglio 2011 13.33.42: SMBonjour: Published honPC_xqjjzcpxst on 10505
mercoledì 27 luglio 2011 13.33.43: Adding users...
mercoledì 27 luglio 2011 13.33.43: Adding administrator Administrator ()
mercoledì 27 luglio 2011 13.33.43: Adding administrator USER (C:\Documents and Settings\USER)
mercoledì 27 luglio 2011 13.33.43: Attempting fallback on ManagementObject exception: Non trovato
mercoledì 27 luglio 2011 13.33.43: WMI path: \\DANIELA\root\cimv2:Win32_SystemAccount.Domain="DANIELA",Name="INTERACTIVE"
mercoledì 27 luglio 2011 13.33.43: reg_reply: honPC_xqjjzcpxst: _smsling._tcp. on local. [0] 0000
mercoledì 27 luglio 2011 13.33.48: Failed to find SID for INTERACTIVE
mercoledì 27 luglio 2011 13.33.48: Attempting fallback on ManagementObject exception: Non trovato
mercoledì 27 luglio 2011 13.33.48: WMI path: \\DANIELA\root\cimv2:Win32_SystemAccount.Domain="DANIELA",Name="Authenticated Users"
mercoledì 27 luglio 2011 13.33.48: Failed to find SID for Authenticated Users
mercoledì 27 luglio 2011 13.33.48: Populating USER's FolderGrouping ( C:\Documents and Settings\USER\(album).Francesco.Renga-Orchestra.E.Voce.(by.@G@-AsTrA).2009 )
mercoledì 27 luglio 2011 13.33.48: Populating USER's FolderGrouping ( C:\Documents and Settings\USER\Graphisoft )
mercoledì 27 luglio 2011 13.33.48: Populating USER's FolderGrouping ( C:\Documents and Settings\USER\Mango )
Error messages come out when handshaking with Mac begin:
mercoledì 27 luglio 2011 13.36.18: *** CONTROL: Exception in ClientAuthorized:
System.IO.IOException: Authentication failed because the remote party has closed the transport stream.
   at System.Net.Security.SslState.InternalEndProcessAuthentication(LazyAsyncResult lazyResult)
   at System.Net.Security.SslState.EndProcessAuthentication(IAsyncResult result)
   at System.Net.Security.SslStream.EndAuthenticateAsServer(IAsyncResult asyncResult)
   at SMSlingShot.ServerSocket.ClientAuthorized(IAsyncResult result)
Last Win32 Error: 997
mercoledì 27 luglio 2011 13.36.18: SlingShot: returning to initial state
mercoledì 27 luglio 2011 13.36.18: SMBonjour: Published honPC_xqjjzcpxst on 10505
mercoledì 27 luglio 2011 13.36.18: reg_reply: honPC_xqjjzcpxst: _smsling._tcp. on local. [0] 0000
mercoledì 27 luglio 2011 13.36.20: *** CONTROL: Exception in ClientAuthorized:
System.IO.IOException: Authentication failed because the remote party has closed the transport stream.
   at System.Net.Security.SslState.InternalEndProcessAuthentication(LazyAsyncResult lazyResult)
   at System.Net.Security.SslState.EndProcessAuthentication(IAsyncResult result)
   at System.Net.Security.SslStream.EndAuthenticateAsServer(IAsyncResult asyncResult)
   at SMSlingShot.ServerSocket.ClientAuthorized(IAsyncResult result)
Last Win32 Error: 997
mercoledì 27 luglio 2011 13.36.20: SlingShot: returning to initial state
mercoledì 27 luglio 2011 13.36.20: SMBonjour: Published honPC_xqjjzcpxst on 10505
mercoledì 27 luglio 2011 13.36.20: reg_reply: honPC_xqjjzcpxst: _smsling._tcp. on local. [0] 0000
mercoledì 27 luglio 2011 13.36.22: *** CONTROL: Exception in ClientAuthorized:
The sequence continues over and over until Migration Assistant on the Mac is open trying to authenticate.
Hope someone could help.

After authentication request

Similar Messages

Maybe you are looking for