After being prompted to download the latest software my iPad froze when it got to the Terms and conditions part. It's now totally frozen, any suggestions?
After being prompted to download the latest software my iPad froze when it got to the Terms and conditions part. It's now totally frozen, any suggestions?
Reset iPad and start all over again.
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
Similar Messages
-
So what happens is that I try to accept the terms and conditions of iCloud (and by the way this annoying message keeps popping up every 2 minutes, literally, asking for my iCloud pass for an old account with a non-existent mail) or the ToC you need agree in order to update your software, I press agree and then nothing happens. It just stays there. (I can still update on my computer but I don't know what to do about iCloud)
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Next try signing out and then back into Settings>iTunes and App Store -
I am unable to get past the terms and conditions part of the upgrade. I have hit agree several times. What do I do?
Scroll down to the bottom of the terms and conditions, then the Agree button will light up and you can proceed.
-
After downloading the iOS 7, it asked me if I agree to the terms and conditions and I keep clicking agree but it stays on that page and I can't even use my phone now. How do I fix this problem?
I have the same problem. frozen on the Terms and Conditions page. Any help, anybody?
-
I'm trying to download an app on my iPhone, however I'm being told that the terms and conditions have changed and i must look at them before i can download. I've gone through the terms and conditions multiple times and i can't find an 'accept' option?
Hello jody5758
Continue your troubleshooting with the article below. IT will walk you through checking the Date & Time as well as checking the settings of your router to ensure a proper connection.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Regards,
-Norm G. -
Can anyone help me get past the terms and conditions?
If you are seeing the Ts & Cs link in the Downloads tab in the iPad's iTunes app then that just means that you don't have any outstanding/queued downloads - your film should have downloaded into the Videos app (iTunes on the iPad is just the iTunes store) :
-
I have downloaded an updated version of iCloud but cannot get past the Terms and Conditions pages, notwithstanding accepting them. Further, I cannot get back into iTunes.
Since I do not know what you actually did maybe:
http://syncor.blogspot.com/2013/09/ios7-and-missing-agree-button.html
Otherwise:
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>iCloud and delete the account from the iPod and then sign back in.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
i cannot install update for iOS 8.1.1
it freezes after I click that I agree with the terms and conditions.
same happened for iOS 8.1
i restarted several times the iPad but nothing changedHad the same issue... Saw post on another thread.. you have to be conencted to the internet AND logged into your iCloud account.
Once I logged into iCloud, all worked...
Kev. -
I downloaded iOS7 in my iphone4 but to install I need to accept the Terms and Conditions. I accepted many times but it doesn't proceed. Stocked.
I updated the software on my iphone4 tonight and ran into this same endless loop - "itunes terms & conditions have been changed" - go to itunes, aceept - back to the "T&C have been changed message" with no ability to do anything in the app store until I accepted the new terms.
While not a very direct solution, I was able to finally accept the terms in a way that seem to register with apple by making a purchase through iTunes on my computer. This forced me through updating my payment information and updating my iTunes software to the latest edition (which I had not yet taken the time to do). After doing both of these, iTunes took me through the terms & conditions on two separate pages, but ultimately allowed me to purchase my song. Once I completed these steps, it fixed the problem on my phone, so now I can update my apps and download new ones without running into that loop.
Hope this helps!!! -
Hi! I tried to instal whatsapp thro istore and it displayed the terms and conditions page. But the problem is there is no save or agree button. I am stuck in this page. I need help. This is a iphone5. This was after I upgraded to ios7.
It is hardly Apple's fault that Epson can't/won't update their driver, but at least Epson suggest that you use the Gutenprint driver, which in any case is far better that what Epson offer.
You can get it here:
http://gimp-print.sourceforge.net/
You can download the latest version from here:
http://sourceforge.net/projects/gimp-print/
Have you downloaded the recent Apple update to Epson drivers?
http://support.apple.com/kb/DL1398 -
It's not jailbroke or anything but it says the terms and conditions have changed. When I agree, it says your session has times out. Try again. But it doesn't give me an option to try again and has a done button underneath it. I press done. The textplus app says "Waiting..." and is gray. What can I do to download this app?
iTunes has to contact Apple to send your agreement to the new conditions, but your security software has to allow this contact. If blocked, you'll get a time out message. Follow the instructions here to check your security software settings: iTunes for Windows: Troubleshooting security software issues
-
Adobe Download Assistant won't let me accept the Terms and Conditions, freezes computer.
I downloaded the Adobe Download Assistant today, and when the Terms and Conditions pops up, it won't let me click the Accept or Quit button. I'm trying to accept so I can download the trial of Photoshop CS6/CS6 Extended and the program freezes after the Terms and Conditions comes up. Therefore, I can't accept and move on to download.
I tried going to the troubleshooting page for the program and it doesn't have anything relating to this problem.
Thanks in advance!that would be a firewall setting so if your firewall is disabled, that setting is irrelevant.
you could use a direct download of ps cs6, if you follow all 7 steps: http://prodesigntools.com/adobe-cs6-direct-download-links.html
if you see a dl error page, you did not follow all 7 steps.
you can also, uninstall adobe download assistant and try reinstalling. -
I updated my I Phone4 with the latest version iOS7 after updating I was asked to enter I tune password etc and then was asked to accept the terms and conditions which I did......but nothing happens it stays on the same unable to complete the final stage.....my phone does not work I am stuffed can someone help.....cannot get thru to Apple I tried contacting them
Hi Rajvidya Das,
Do the following, then try again:
1. Close all open apps: Double click on the Home key and then swipe up on each of the thumbnails that appear above the open app icons
2. Sign out of the iTunes store: Settings>iTunes & App Store, click on your Apple/iTunes ID, then sign out
3. Check Settings>Safari, and make sure that "Block Cookies" is not set to "Always". If it is, change it to either of the other two options
4. Make sure you do not have Restrictions turned on. If they are turned on, make sure that access is allowed for Safari, iTunes Store, Installing Apps, and Deleting Apps
5. Reset your device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Silver Apple appears (up to 30 seconds). Once the Home screen redisplays sign back into iTunes and try again
Cheers,
GB -
Ok so I updated to iOS 7 on my iPod (5th) it let me update my apps but I cannot download new apps thanks to the terms and conditions. Also my iTunes won't start it just blank, I tried everything I need help
Did you download the new iTunes update that was also released this afternoon? That might be the problem. The new iTunes update came out today as well as the new iOS 7 update and if you haven't downloaded the new iTunes update it may be a compatibility problem so if you didn't, first update to the new iTunes and try again.
-
When I try to setup my new iPad air, I go through all the steps for the iCloud sign-in and choosing security questions and what not. But after I hit the agree to the terms and conditions... It says Apple ID could not be created because of a server error. Have no clue what to do... I've restarted the iPad and get the same message. But my internet works just fine.
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings
Maybe you are looking for
-
How to use the current view in script logic - %DIMENSIONNAME_SET% not work
Hello, I have the requirement to use the values from the current view in the script logic. User would like to use the members which were selected from the current view in the calculation. We are using SAP BPC 7.0 SP06 I have prepared the following sc
-
Dear Gurus, I have configured receiver SFTP adapter using key based authentication to place the files in root (~/) folder, we have shared our public key to the SFTP vendor and they stored it in their key store. But while testing the scena
-
System landscape directory configuration
Hi , I have problem related to System Landscape directory. Actually my intention is to consume webservice from abap system.So i heard that we have to configure setting in system land scape directory. So if i go to system landscape directory i.e. visu
-
Flash CS6 - Play MP3 In iOS Native Player?
Hello, In my Flash CS6-based iPhone app, I'm trying to play an MP3 using the iPhone's native player, showing all the controls. But, I cannot get it to play right in the iPhone's native player. Problem 1: I'm playing the MP3 directly in a WebStageVie
-
Need to change the name of a GP process instance at runtime.
Is there a way to change the name of a GP process instance at runtime? I would like to change the name of the process instance to include the employee's name who initiated the process. This way when the process owner or overseer displays thier list