After BI install SIA and Tomcat could not start with service account.

Hi BO Gurus,
I want to install BO child node (Expand the parent install)
Client IT prepared a system with MS Server 2012 with Windows 8 as OS, and assigned a Service Account for me.
I gave service account following permissions -
Act as a part of operating system
log on as a batch
log on as a service
After this I rebooted the system and logged in with Service Account credentials. Started the installer, performed custom/expand install.
the install was successful.
When I opened CCM, both Tomcat and SIA are running under 'localsystem' account.
I want them to run under service account --> i sopped SIA and changed credentials in 'Log on as' box under SIA properties.--> Click on 'apply' and 'OK'
When I go on and start SIA I get following error -
' The Service did not start due to log on failure'.
The same service account runs services on 3 other BO boxes including parent node of the above install and 2 other DS boxes and everything apart from this machine works exactly fine.
Please help!
Thanks,
Maitreyee

Maitreyee,
BI 4.x Platform will NOT work on Desktop OS like Windows 7 / 8.x / 8.1, it required 64bit Server Operating system. See attached screenshot.
Regards,
Ajay

Similar Messages

So I have updated my iphone4 GSM to ios 6.01, however after updating, my safari and mail could not work anymore, when i open these 2 apps, it just opens and hangs then it crashes.

So I have updated my iphone4 GSM to ios 6.01, however after updating, my safari and mail could not work anymore, when i open these 2 apps, it just opens and hangs then it crashes.
anybody can help me ?

So I have updated my iphone4 GSM to ios 6.01, however after updating, my safari and mail could not work anymore, when i open these 2 apps, it just opens and hangs then it crashes.
anybody can help me ?

My iphone can't back up to pc,because a session could not started with iphone.how fix the itunes

my iphone can't back up to pc,because a session could not started with iphone.how fix the itunes or iphone,this problem is after update ios7.0.4 and update itunes.pls teach me fix my pc,my pc is windows vista....

i have this problem too >> but i try other iphone ios7.0.3 i ok and work
but my ios7.0.4 cant back up and keep pop out session could not started with iphone !
really hope someone can help it ..
thank a lot !

Could not start instance service of Instance - Solman 7.1 & Sybase

Dear All,
Greetings!!
We are in the process of installing Solman 7.1 with Sybase ASE 15.7 on SUSE Linux 11 SP03. During phase 50 we are getting an error like "Could not start instance service of Instance". I have attached the Error and the Inst_Dev.log screenshot for your reference.
Please help us with some suggestion or solution at the earliest.
Thanks,
Ela

Hi Chatur,
Thanks for your reply. The issue had been resolved.
Yes, /usr/sap/ASM/ASCS/exe was empty actually & we copied the Kernel files to this directory & retired again & its working fine now.
Thanks again.
Regards,
Ela

Could not start SQL services (Plz help me)

I logged in windows with an administrator account, but I could not start sql services. Here is the newest log file, please help me to fix it. Thank in advanced.
2014-10-02 16:17:49.06 Server Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86)
Oct 14 2005 00:33:37
Copyright (c) 1988-2005 Microsoft Corporation
Developer Edition on Windows NT 5.1 (Build 2600: Service Pack 3)
2014-10-02 16:17:49.06 Server (c) 2005 Microsoft Corporation.
2014-10-02 16:17:49.06 Server All rights reserved.
2014-10-02 16:17:49.06 Server Server process ID is 3888.
2014-10-02 16:17:49.06 Server Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG'.
2014-10-02 16:17:49.06 Server This instance of SQL Server last reported using a process ID of 1104 at 10/2/2014 4:07:13 PM (local) 10/2/2014 9:07:13 AM (UTC). This is an informational message only; no user action is required.
2014-10-02 16:17:49.06 Server Registry startup parameters:
2014-10-02 16:17:49.06 Server
-d C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\master.mdf
2014-10-02 16:17:49.06 Server
-e C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG
2014-10-02 16:17:49.06 Server
-l C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\mastlog.ldf
2014-10-02 16:17:49.07 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2014-10-02 16:17:49.07 Server Detected 2 CPUs. This is an informational message; no user action is required.
2014-10-02 16:17:49.71 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
--The Anh--

Hello,
Can you tell us the status of the issue ? If you have found answer please post here so that it can help other members when needed. If You found answer in this thread please mark answer to the post and close the thread
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles

MS SQL Server 2008 not getting installed properly - MOF compiler could not connect with the WMI server

I am trying to install SQL Server 2008 in my local machine. However, I kept running into errors with the following error message:
"The MOF Compiler could not connect with the WMI Server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such
as the failure of the WMI Server to start".
I also ran "rundll32 wbemupgd, UpgradeRepository" to rebuild WMI repository, it doesn't help either. I got the same error message.
Any ideas what settings I need to change in order to ensure a successful installation of SQL Server 2008?

"The MOF Compiler could not connect with the WMI Server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such
as the failure of the WMI Server to start".
I also ran "rundll32 wbemupgd, UpgradeRepository" to rebuild WMI repository, it doesn't help either. I got the same error message.
Any ideas what settings I need to change in order to ensure a successful installation of SQL Server 2008?
can you check below two links.Make sure previous failed installation is removed completely.
http://connect.microsoft.com/SQLServer/feedback/details/356258/the-mof-compiler-could-not-connect-with-the-wmi-server#
Solution given by Connect MS is:
Possibly the issue was caused by uninstalling from add-remove programs - at any rate, using aaron bertrand's suggestion below fixed the issue. Also of note - I used the local admin for the install.
http://sqlblog.com/blogs/aaron_bertrand/archive/2009/02/20/the-xp-sp3-msxml6-sp2-sql-server-debacle.aspx
yes - remove msxml6 and any other half installed portion of sql 2008 and REBOOT and install sql
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Could not start Biztalk Service Biztalk Group: Error 1053 , In Biztalk Server 2010 environment

Hi,
I am getting following error while starting Biztalk 2010 service
Error message :
Windows could not start the Biztalk Service Biztalk Group :
BizTalkServerApplication service on Local Computer.
Error 1053: The service did not respond to the start or control request in a timely fashion
Please suggest.
Thank you.
Warm Regards,
Anant Patil.

When did this issue start?
Did you install something? Some update? To OS, to SQL Server, to BizTalk?
Did you deploy some BizTalk artifacts?
If so, try to undo this software.
Were there some changes in network?
Leonid Ganeline [BizTalk MVP]
BizTalk: Sample: Context Routing and Throttling with orchestration

JAVA could not start with NON - zero exit code after Config UME

Dear Expert,
I found some problem with JAVA. We have been success to install for JAVA.
We can logon to that. But since we configuration for UME. We found the problem
with startup JAVA. We can not startup for JAVA. It show for error.
====================================
Error==> The JAVA VM terminated with a non - zero exit code.
Please see SAP note 943602, section 'J2EE Engine exit codes'
for additional information and trouble shooting.
====================================
Critical shutdown was invoked. Reason is Core service security failed.
J2EE Engine can not be started.
====================================
MAC ADDRESS can not be access
====================================
Java framework can not be find .... D:\usr\sap\...\jvm.jsp ==> can not remember
Could you analyze for me ? How to solved for this problem ?
Regards,
Somkeit

Somkeit,
What did you change in UME Configuration?
Please look in defaulttrace_# log and paste error here.
What is exit code ?
Can you revert back your UME changes and see if system starts or no.
Thanks,
Digesh Joshi

IOS 7.1.2: recovery mode and itunes could not verify with iphone updates

after clicking the update, it says that I have to connect to iTunes. After connecting the iTunes, the iTunes doesn't not recognize the phone and I have to restore my phone. However, after clicking 'restore iphone' and the connection to software is stalled and now still have problems with connection. Fyi, I have checked the wifi and internet connection, all seems OK and good.
it almost 4 hours now, I cant use my phone to make phone calls or checking emails.
what should I do?

Hi there Rizalkheli,
You may find the troubleshooting steps in the article below helpful.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
-Griff W.

Could not start PSUB service in windows XP

I have installed OC 4.6 on Window XP Service Pack 3, while I try to start PSUB service, I get Below error message
could not stat the PSUB service clinical service on local computer
Erro 1053; The Service did not respond to the start or control request in a timely fashion
no logfile generated in OPA_HOME/oc/46/log diectory
in XP Event View, found follwoing message 'Initializing PGA for process SMCO in instance clinical.'
in Oracle 11g DB alert log file no error messages...

Hi,
The issue is because of the OS. Windows XP does not support for installation. XP can be client only. For DB Tier & Application server we need to use Windows 2000/2003 server editions. These are the certified operating systems for installation by Oracle Corporation.
Please refer the tech stack for more information.
Regards,
Satish

Could not start Reports Service

When starting reports service appear message number 186, I did the changes the documentation said and nothing.
Does anybody could say why ?
Thanks

Problem solved
Thanks

Someone purchased tunes and it was not me with my account

I received an email telling me that on April 16th that I purchase $20.60 worth of tunes Receipt #159018268661- I am the only one with an I-touch, no one else in this household even does this, and I did not do this it drain my account almost dry, and the tune are something I would not play. I would like this money back

This is a user to user support forum, no one here has access to your account.
Contact iTunes store support. http://www.apple.com/support/itunes/contact.html

Could not start OracleOraHomeTNSListener service...

I cannot connect to db because the listener isn't started. When I try to start the service I get this error message. It worked fine yesterday. This just started this morning and I haven't changed anything. Any suggestions where to look or what to do?

User error! The Hostname in LISTENER.ORA was different than in TNSNAMES.ORA. Fixed that and it started fine.

Urgent! http listener not started with services

Hi,
I installed oracle 9i on my win2k, and it runs fine when I started manually with the ${ORA_HOME}\j2ee\Oracle9iDS\startinst.bat.
I then try to registrate it as services with this command: rwserver -install rep_mypcname autostart=yes
It registrated successfully and I save it is started automatically, I also saw an icon (smart agent) on my right hand bottom taskbar.
But when I tested it via http://localhost:8888/reports/
It can't find the server, and obviously no http listener is up.
All my config are default, here is my rwservlet.properties:
SERVER_IN_PROCESS=YES
Also there is no log files generated in ${ORA_HOME}\j2ee\Oracle9iDS\log\ when it is started as service, but if it is started from command line by using "startinst.bat", some log files are generated.
Am I missing some steps?
Thanks.
David

David,
Script startinst.bat starts the OC4J instance, not the Reports Server. When you send request to http://<server>:<port>/reports/rwservlet, it will startup an in-process Reports Server if it has not been started.
The command you run:
rwserver -install rep_mypcname autostart=yes
only install Reports Server as a service. It has nothing to do with OC4J instance, which you will still need to startup yourself. That's why http server is not up.
The difference is that if the Reports Server is up, after you start up OC4J, the in-process server will no longer need to be started.
-Jeff

I had iCloud on my Microsoft Office 2010 and tried to increase the font size - I read to unistall and reinstall, so I did. This took iCloud away from Calendars and Contacts. I re-installed iCloud and it will not sync with my Calendars

I had iCloud installed, and it was working, then I wanted to increase font size in the notes section of Calendar. I read to uninstall iCloud and reinstall iCloud and it would be fixed.
Once I reinstalled iCloud it did not show up in Microsoft Office 2010 - Calendar or Contacts.........which it had previous to the uninstall.
When I sync it errors. I am at my wits end trying to sync this, and it just keeps erroring. I am not syncing phots/photo stream, just contacts and calendar.
Please can anyone tell me what setting I have to change??

Needed to add some clarification here:
iCloud shows me as signed in, but Calendars are NOT checked
Internet Accounts shows Calendars as syncing

After BI install SIA and Tomcat could not start with service account.

Similar Messages

Maybe you are looking for