After BI Stats installation: Why is this query not reporting on my query?
Hi,
ok, so I thought I was done with BI Stats installation and I run a query:
Detailed Query Runtime Statistics: Analysis 0TCT_MC02_Q0200 0TCT_MC02
which came with the installation.
I see query QueryColleague in this query with the information:
Time = 21.992
Time:Ste =29.480
Counter = 0
1.
What is the significance of these 3 figures (Time, Time:Ste, Counter)? Does it in any way give a sense of the performance of the query?
2.
Under the Settings for BI Statistics I verified and QueryColleague was set as:
Statistics = D
OLAP detail level = (blank)
I have a query QueryMyOwn which following the installation guidelines, I set up as:
Statistics = X
OLAP detail level = 2
I have since run QueryMyOwn a and run the delta process chains again but this query still not does appear in this Detailed Query Runtime Statistics. Any idea what may be going on?
3.
Am I misinterpreting this report? I thought it was going to show a list of queries which BS Stats has collected data and reporting on them.
4.
Which of the many queries which come with the BI Stats have you found useful so far? I will appreciate the reason. Any particular one standing out if you need to track why a particular report may not be performing well?
Thanks
Hi,
I think you are viewing the queries from Admin cockpit 0TCT_MC02_Q0200 which has filter to display the query that had been executed in last 24 hours.
Most of the queries from Admin Cockpit will be help you to monitor the data load stats, which load taken long time to complete including the process chains, DTP etc. There are some other queries with have conditional / Expection which filter the data based on top 10 process etc.
Few Queries that was useful to me are
0TCT_MC22_Q0104 - Long term trends in total runtime
0TCT_MC12_Q0110 - Process status
0TCT_MC01_Q0122 - Deviation in runtime of BI Application Object
Hope it helps,
Cheers,
Balaji
Similar Messages
-
facetime? I have been having audio issues where by my contacts cannot hear me after a while.. why is this...?
Don't know. You asked in the wrong forum community. Try next door, down the road, around the corner and through the cornfield maze - Facetime for Mac community
-
I've purchased an app and it shows up in my iTunes. But when I download it to my phone, it disappears after its installed. Why is this?
Is the app checked in the Apps tab of iTunes? That's how you tell iTunes whether you want the app on your phone or not.
Otherwise, check the very last screen on the phone. -
I have the CC Photography subscription. The last several days, every time I bring up Photoshop, I get a window stating "Sign In Required" and "Terms and Conditions for Trial Software". Why? This is not trial software.
Asked to sign in after paying may help
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
or
Chat Now button near the bottom for Activation and Deactivation problems may help
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html -
on system start up safari boots up and shortly after chrome boots up. why? I do not want chrome to boot up.. What do I need to do?
It's likely that one of your login items is causing the problem. Select the Login Items tab in the Users & Groups pane of System Preferences. Delete any items that you don't recognize. If you're not sure which ones to delete, double-click each to test it.
-
See authorized computers - why is this question not answered? Apparently, Apple wil not expose this information to the account owner. Is is only possible to rate this article with 1-5 stars - not with zero stars?
Yep, you're right. Just 1-5 stars.
-
Why does this websites not work on our Mac products?
http://www.gordonbennett2012.ch/
We are working on the above website: We cannot get it to work on the following Mac devises. Would you please advise the reason for this and how we can fix it?
From: FLY GAS
Subject: Fwd: Website of Gordon Bennett 2012
Date: August 11, 2012 1:52:22 PM MDT
To: René Louis Cc: Mark Sullivan
Hello René, Thank you very much for your email. I am happy to work with you. I have been working on this all day. I still have not figured out why this is not working. I am Mark Sullivan and Cheri White's Crew Chief/Technical Support for the USA.
The following products are being used:
MacBook Pro,Mac OS X Version 10.7.4, Processor 2.8 GHz Intel Core 2 Duo
Mac iPad, Version 5.1.1 (9B206)
Non of these prodects will upload your site http://www.gordonbennett2012.ch/
I have tried the following browsers:
Opera: Could not connect to remote server,
Safari: no responce
Firefox: The connection has timed out The server at gordonbennett2012.ch is taking too long to respond.
Google Chrome: Oops! Google Chrome could not connect to www.gordonbennett2012.ch
I have had all our crew do the same. They are in different parts of the USA.
And the response has been the following:
North Carolina on PC and Android: Site uploaded
New Mexico on PC and iPhone: Site did not upload on either
New Mexico on PC and iPhone: Site did upload
I have also contacted Mac. Please let me know your thoughts so we can sort this out. In the past I have been able to get your site. Just in the past month I have not been able to. I am getting a timed out error from ALL the above browsers.
Kind regards, Letitia
Ms. Letitia Hill
TEAM USA/FLY GAS
PO Box 7186
Albuquerque, New Mexico 87194 USA
TEL: 505-270-6759
FAX: 505-503-8430
E-Mail: [email protected]
Website: www.flygas.net
Begin forwarded message:
From: René Louis
Subject: Website of Gordon Bennett 2012 Date: August 11, 2012 1:25:13 PM MDT
To: [email protected]
Dear Letitia Thank you very much for your message about our website.
I am also working with a Mac and could not find any problems. I would be very interested to know which products you are using and what is not working so I could have a detailed look at it.
Thank you very much.
Best Regards
René
Gordon Bennett 2012 Secretariat / Postfach 280 / CH-9650 Nesslau / Switzerland www.gordonbennett2012.ch René Louis / Kirchweg 672 / CH-9650 Nesslau / SwitzerlandThere seems to be a block with the Internet server in the United States as other Internet and cell servers i.e. Verizon and Century-Link DSL work with Mac, Andriod and PC. It just seems to be Mac on Comcast that is not...
Without more data I'm inclined to say it's more likely to be Comcast itself, rather than 'Macs on Comcast'.
For example, do other devices (PCs, Android, iOS) on that Comcast network also have problems connecting? or do they connect fine?
I'd expect that any device at that network has a problem, which indicates a problem with Comcast. It might be their DNS not resolving properly, or them not routing data correctly, but that should be your focus.
Perform a DNS lookup on the www.gordonbennett2012.ch hostname. What result do you get? Is it the expected address?
If that returns the right address, what do you get with a traceroute?
That will test the routing befween your system and the server, and may indicate other problems on the network. -
I have 4 statements.
echo off
plus80 / @z:\nesp1483_batch
plus80 / @z:\nesp1484a_batch
exit
The first statement plus80 / @z:\nesp1484_batch inserts records into a table and creates a report and deletes the table.
However the second statement plus80 / @z:\nesp1484a_batch is not working properly. I want it to insert records into a table, create a report and then delete the table but it is not working properly. It is hanging up on this statement.
I need to say plus80 to get the program to execute properly.
I have also tried sqlplus /@z:\nesp1484a_batch but this does not work either.
What do I need to do to make the third statement to execute properly?I know that it is not working
because the response time is slow and I have over 15 minutes
and nothing is happening. How do you know it is not working as opposed to just working slow?
Do you have any logging routines in your code? If you have, switch on them on and see what's happening. If not, now is a good time to think about including them...
Cheers, APC -
Why is this session not connecting to the preferred Instance ?
Grid Infrastructure/DB Version : 11.2.0.3
Platform : RHEL 5.8
We have a 3-node cluster and I've configured the RAC service PKDS_UAT_01 with its preferred instance as JDSCFS3
$ srvctl config service -s PKDS_UAT_01 -d JDSCFS
Service name: PKDS_UAT_01
Service is enabled
Server pool: JDSCFS_PKDS_UAT_01
Cardinality: 1
Disconnect: false
Service role: PRIMARY
Management policy: AUTOMATIC
DTP transaction: false
AQ HA notifications: false
Failover type: NONE
Failover method: NONE
TAF failover retries: 0
TAF failover delay: 0
Connection Load Balancing Goal: LONG
Runtime Load Balancing Goal: NONE
TAF policy specification: NONE
Edition:
Preferred instances: JDSCFS3
Available instances: JDSCFS1
Then I start a remote session through SQL*Plus like
sqlplus scott/tiger@rtfms-scan:1624/PKDS_UAT_01.acproot.net
When I check in the DB, it shows that the session is actually connected to instance 1 despite the preferred instance set as Instance3 (JDSCFS3) for the service PKDS_UAT_01
SQL> select inst_id, sid from gv$session where username='SCOTT';
INST_ID SID
1 3839
Why is this happening ?1. check that all services are running on all nodes. Actually, you service should run only on preffered node
srvctl status service -d db_name
2. restart services
3. try again
Regards
Ed -
After installing Mountain Lion, why screen server does not detect photos from iPhoto?
After installing Mountain Lion, why the screen server does not detect photos from iPhoto?
I had the same problem and found the solution here:
https://discussions.apple.com/thread/3189272 -
when i try and sync my itunes with my apple tv (1st gen) it crashes my wi-fi connection. please can anyone help on this? I do remember it saying at some point that something shared the same IP address with something else .... but i am rather clueless. Both me and my husband have macs, iphones and apple tv - but it is my itunes account that the apple tv uses if that is any help.
Here's the solution for the T-string error.
http://iweb.dailynews.webege.com/PHP_parse_error.html -
HT1175 Time machine backups are extremely slow after Mavericks upgrade. Why is this happening?
How can I speed up time capsule backup in mavericks?
I can suggest a few things to try but I am yet to see a solution.. I am not prepared to move to Mavericks until a couple of revisions fix the beta standard of some of these things. TM in particular seems to have badly suffered.
Are you using wireless? Especially double hop wireless with the TC as the extend.. don't!!
Use ethernet direct to the TC and turn off wireless.. see if that helps.
Otherwise I reckon until Apple get an update use a local usb disk plugged into the computer and don't try and use TM to network drive. Or if you still want to use the network drive use something like CCC which should be fine under Mavericks since it is a much more robust software. (without lots of bells and whistles.. but functional). -
Why is this blend not working?
I'm working in CS4 on a Mac. I want to make a color wheel from 10 pastel colors. I planned to use ten spokes - each one stroked with one color - and then blend them. I've done this before successfully with other colors, I got the idea from this website: http://colorburned.com/create-a-color-picker-icon-in-illustrator/
However, it isn't working this time. Here are my before and after pictures.
Any ideas on why that one segment is so ragged? I've tried increasing the width of each spoke from 1 pt to 4pt but it didn't help.You must duplicate the top object and place it below the entire stack.
In this example the strokes start with the yellow (at the bottom of the stack) and end with the green (at the top of the stack).
Select the green stroked path, Edit > Copy, Edit > Paste in Front, Object > Arrange > Send to Back.... then create the blend.
You need to start and stop with the same color in the same location for the entire circle to blend correctly. -
Why does this class not read and write at same time???
I had another thread where i was trying to combine two class files together
http://forum.java.sun.com/thread.jspa?threadID=5146796
I managed to do it myself but when i run the file it does not work right. If i write a file then try and open the file it says there are no records in the file, but if i close the gui down and open the file everything get read in as normal can anybody tell me why?
import java.io.*;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import bank.BankUI;
import bank.*;
public class testing extends JFrame {
private ObjectOutputStream output;
private BankUI userInterface;
private JButton SaveToFile, SaveAs, Exit; //////////savetofile also saves to store need to split up and have 2 buttons
//private Store store; MIGHT BE SOMETHING TO DO WITH THIS AS I HAD TO COMMENT THIS STORE OUT TO GET IT WORKING AS STORE IS USED BELOW
private Employee record;
//////////////////////////////////////from read
private ObjectInputStream input;
private JButton nextButton, openButton, nextRecordButton ;
private Store store = new Store(100);
private Employee employeeList[] = new Employee[100];
private int count = 0, next = 0;
/////////////////////////////////////////////from read end
// set up GUI
public testing()
super( "Employee Data" ); // appears in top of gui
// create instance of reusable user interface
userInterface = new BankUI( 9 ); // nine textfields
getContentPane().add( userInterface, BorderLayout.CENTER );
// configure button doTask1 for use in this program
SaveAs = userInterface.getSaveAsButton();
SaveAs.setText( "Save as.." );
//////////////////from read
openButton = userInterface.getOpenFileButton();
openButton.setText( "Open File" );
openButton.addActionListener(
// anonymous inner class to handle openButton event
new ActionListener() {
// close file and terminate application
public void actionPerformed( ActionEvent event )
openFile();
} // end anonymous inner class
); // end call to addActionListener
// register window listener for window closing event
addWindowListener(
// anonymous inner class to handle windowClosing event
new WindowAdapter() {
// close file and terminate application
public void windowClosing( WindowEvent event )
if ( input != null )
closeFile();
System.exit( 0 );
} // end anonymous inner class
); // end call to addWindowListener
// get reference to generic task button doTask2 from BankUI
nextButton = userInterface.getDoTask2Button();
nextButton.setText( "Next Record" );
nextButton.setEnabled( false );
// register listener to call readRecord when button pressed
nextButton.addActionListener(
// anonymous inner class to handle nextRecord event
new ActionListener() {
// call readRecord when user clicks nextRecord
public void actionPerformed( ActionEvent event )
readRecord();
} // end anonymous inner class
); // end call to addActionListener
//get reference to generic task button do Task3 from BankUI
// get reference to generic task button doTask3 from BankUI
nextRecordButton = userInterface.getDoTask3Button();
nextRecordButton.setText( "Get Next Record" );
nextRecordButton.setEnabled( false );
// register listener to call readRecord when button pressed
nextRecordButton.addActionListener(
// anonymous inner class to handle nextRecord event
new ActionListener() {
// call readRecord when user clicks nextRecord
public void actionPerformed( ActionEvent event )
getNextRecord();
} // end anonymous inner class
); // end call to addActionListener
///////////from read end
// register listener to call openFile when button pressed
SaveAs.addActionListener(
// anonymous inner class to handle openButton event
new ActionListener() {
// call openFile when button pressed
public void actionPerformed( ActionEvent event )
SaveLocation();
} // end anonymous inner class
); // end call to addActionListener
// configure button doTask2 for use in this program
SaveToFile = userInterface.getSaveStoreToFileButton();
SaveToFile.setText( "Save to store and to file need to split this task up" );
SaveToFile.setEnabled( false ); // disable button
// register listener to call addRecord when button pressed
SaveToFile.addActionListener(
// anonymous inner class to handle enterButton event
new ActionListener() {
// call addRecord when button pressed
public void actionPerformed( ActionEvent event )
addRecord(); // NEED TO SPLIT UP SO DONT DO BOTH
} // end anonymous inner class
); // end call to addActionListener
Exit = userInterface.getExitAndSaveButton();
Exit.setText( "Exit " );
Exit.setEnabled( false ); // disable button
// register listener to call addRecord when button pressed
Exit.addActionListener(
// anonymous inner class to handle enterButton event
new ActionListener() {
// call addRecord when button pressed
public void actionPerformed( ActionEvent event )
addRecord(); // adds record to to file
closeFile(); // closes everything
} // end anonymous inner class
); // end call to addActionListener
// register window listener to handle window closing event
addWindowListener(
// anonymous inner class to handle windowClosing event
new WindowAdapter() {
// add current record in GUI to file, then close file
public void windowClosing( WindowEvent event )
if ( output != null )
addRecord();
closeFile();
} // end anonymous inner class
); // end call to addWindowListener
setSize( 600, 500 );
setVisible( true );
store = new Store(100);
} // end CreateSequentialFile constructor
// allow user to specify file name
////////////////from read
// enable user to select file to open
private void openFile()
// display file dialog so user can select file to open
JFileChooser fileChooser = new JFileChooser();
fileChooser.setFileSelectionMode( JFileChooser.FILES_ONLY );
int result = fileChooser.showOpenDialog( this );
// if user clicked Cancel button on dialog, return
if ( result == JFileChooser.CANCEL_OPTION )
return;
// obtain selected file
File fileName = fileChooser.getSelectedFile();
// display error if file name invalid
if ( fileName == null || fileName.getName().equals( "" ) )
JOptionPane.showMessageDialog( this, "Invalid File Name",
"Invalid File Name", JOptionPane.ERROR_MESSAGE );
else {
// open file
try {
input = new ObjectInputStream(
new FileInputStream( fileName ) );
openButton.setEnabled( false );
nextButton.setEnabled( true );
// process exceptions opening file
catch ( IOException ioException ) {
JOptionPane.showMessageDialog( this, "Error Opening File",
"Error", JOptionPane.ERROR_MESSAGE );
} // end else
} // end method openFile
public void readRecord() // need to merger with next record
Employee record;
// input the values from the file
try {
record = ( Employee ) input.readObject();
employeeList[count++]= record;
store.add(record);/////////ADDS record to Store
store.displayAll();
System.out.println("Count is " + store.getCount());
// create array of Strings to display in GUI
String values[] = {
String.valueOf(record.getName()),
String.valueOf(record.getGender()),
String.valueOf( record.getDateOfBirth()),
String.valueOf( record.getID()),
String.valueOf( record.getStartDate()),
String.valueOf( record.getSalary()),
String.valueOf( record.getAddress()),
String.valueOf( record.getNatInsNo()),
String.valueOf( record.getPhone())
// i added all those bits above split onto one line to look neater
// display record contents
userInterface.setFieldValues( values );
// display message when end-of-file reached
catch ( EOFException endOfFileException ) {
nextButton.setEnabled( false );
nextRecordButton.setEnabled( true );
JOptionPane.showMessageDialog( this, "No more records in file",
"End of File", JOptionPane.ERROR_MESSAGE );
// display error message if class is not found
catch ( ClassNotFoundException classNotFoundException ) {
JOptionPane.showMessageDialog( this, "Unable to create object",
"Class Not Found", JOptionPane.ERROR_MESSAGE );
// display error message if cannot read due to problem with file
catch ( IOException ioException ) {
JOptionPane.showMessageDialog( this,
"Error during read from file",
"Read Error", JOptionPane.ERROR_MESSAGE );
} // end method readRecord
private void getNextRecord()
Employee record = employeeList[next++%count];//cycles throught accounts
//create aray of string to display in GUI
String values[] = {String.valueOf(record.getName()),
String.valueOf(record.getGender()),
String.valueOf( record.getStartDate() ), String.valueOf( record.getAddress()),
String.valueOf( record.getNatInsNo()),
String.valueOf( record.getPhone()),
String.valueOf( record.getID() ),
String.valueOf( record.getDateOfBirth() ),
String.valueOf( record.getSalary() ) };
//display record contents
userInterface.setFieldValues(values);
//display record content
///////////////////////////////////from read end
private void SaveLocation()
// display file dialog, so user can choose file to open
JFileChooser fileChooser = new JFileChooser();
fileChooser.setFileSelectionMode( JFileChooser.FILES_ONLY );
int result = fileChooser.showSaveDialog( this );
// if user clicked Cancel button on dialog, return
if ( result == JFileChooser.CANCEL_OPTION )
return;
File fileName = fileChooser.getSelectedFile(); // get selected file
// display error if invalid
if ( fileName == null || fileName.getName().equals( "" ) )
JOptionPane.showMessageDialog( this, "Invalid File Name",
"Invalid File Name", JOptionPane.ERROR_MESSAGE );
else {
// open file
try {
output = new ObjectOutputStream(
new FileOutputStream( fileName ) );
SaveAs.setEnabled( false );
SaveToFile.setEnabled( true );
Exit.setEnabled( true );
// process exceptions from opening file
catch ( IOException ioException ) {
JOptionPane.showMessageDialog( this, "Error Opening File",
"Error", JOptionPane.ERROR_MESSAGE );
} // end else
} // end method openFile
// close file and terminate application
private void closeFile()
// close file
try {
//you want to cycle through each recordand add them to store here.
int storeSize = store.getCount();
for (int i = 0; i<storeSize;i++)
output.writeObject(store.elementAt(i));
output.close();
input.close();// from read!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
System.exit( 0 );
// process exceptions from closing file
catch( IOException ioException ) {
JOptionPane.showMessageDialog( this, "Error closing file",
"Error", JOptionPane.ERROR_MESSAGE );
System.exit( 1 );
} // end method closeFile
// add record to file
public void addRecord()
int employeeNumber = 0;
String fieldValues[] = userInterface.getFieldValues();
// if account field value is not empty
if ( ! fieldValues[ BankUI.IDNUMBER ].equals( "" ) ) {
// output values to file
try {
employeeNumber = Integer.parseInt(
fieldValues[ BankUI.IDNUMBER ] );
String dob = fieldValues[ BankUI.DOB ];
String[] dateofBirth = dob.split ("-"); // what used to put between number chnage to /
String sDate = fieldValues[ BankUI.START ];
String[] startDate = sDate.split ("-");
String sex = fieldValues[ BankUI.GENDER ];
char gender = (sex.charAt(0)); // check if m or f prob check in employee
if ( employeeNumber >= 0 ) {
/* create new record =String name, char gender, Date dob, String add, String nin, String phone, String id, Date start, float salary*/
record = new Employee(
fieldValues[ BankUI.NAME ],
gender,
new Date( Integer.parseInt(dateofBirth[0]),
Integer.parseInt(dateofBirth[1]),
Integer.parseInt(dateofBirth[2])),
fieldValues[ BankUI.ADDRESS ],
fieldValues[ BankUI.NATINTNO ],
fieldValues[ BankUI.PHONE ],
fieldValues[ BankUI.IDNUMBER ],
new Date( Integer.parseInt(startDate[0]),
Integer.parseInt(startDate[1]),
Integer.parseInt(startDate[2])),
Float.parseFloat( fieldValues[ BankUI.SALARY ] ));
if (!store.isFull())
store.add(record);
else
JOptionPane.showMessageDialog( this, "The Store is full you cannot add\n"+
"anymore employees. \nPlease Save Current File and Create a New File." );
System.out.println("Store full");
store.displayAll();
System.out.println("Count is " + store.getCount());
// output record and flush buffer
//output.writeObject( record );
output.flush();
else
JOptionPane.showMessageDialog( this,
"Account number must be greater than 0",
"Bad account number", JOptionPane.ERROR_MESSAGE );
// clear textfields
userInterface.clearFields();
} // end try
// process invalid account number or balance format
catch ( NumberFormatException formatException ) {
JOptionPane.showMessageDialog( this,
"Bad ID number, Date or Salary", "Invalid Number Format",
JOptionPane.ERROR_MESSAGE );
// process exceptions from file output
catch ( ArrayIndexOutOfBoundsException ArrayException ) {
JOptionPane.showMessageDialog( this, "Error with Start Date or Date of Birth\nPlease enter like: 01-01-2001",
"IO Exception", JOptionPane.ERROR_MESSAGE );
// process exceptions from file output
catch ( IOException ioException ) {
JOptionPane.showMessageDialog( this, "Error writing to file",
"IO Exception", JOptionPane.ERROR_MESSAGE );
closeFile();
} // end if
} // end method addRecord
public static void main( String args[] )
new testing();
} // end class CreateSequentialFileSure you can read and write at the same time. But normally you would be reading from one place and writing to another place.
I rather regret avoiding the OP's earlier post asking how to combine two classes. I looked at the two classes posted and realized the best thing to do was actually to break them into more classes. But I also realized it was going to be a big job explaining why and how, and I just don't have the patience for that sort of thing.
So now we have a Big Ball Of Tar™ and I feel partly responsible. -
String answer = new String("");
in = new BufferedReader(new InputStreamReader( connection.getInputStream ()));
String test = new String("");
for (int i = 0 ; i < 1000 ; i++)
answer = in.readLine();
if (answer == null)
System.out.println ("null");
break;
else
test += answer;
System.out.println ("answer: " + answer);
System.out.println ("test: " + test);
Many times, the loop will go through 2 iterations but each time, test is only equal to the first answer. The second, third, fourth etc.time it goes through the loop, it should concatenate the value of answer to the end of the string variable test. So why is it that whenever i run the program that has this code, the loop might lloop many times (let's say 2 time) but the value of test is only the first answer, and not the first answer concatenated with the second answer.It worked for me...my code looks like this...i used FileInputStream instead of connection..
import java.io.*;
class Forum {
public static void main(String a[]) throws IOException{
String answer = new String("");
BufferedReader in = new BufferedReader(new InputStreamReader( new FileInputStream("hi.txt")));
String test = new String("");
for (int i = 0 ; i < 1000 ; i++)
answer = in.readLine();
if (answer == null)
System.out.println ("null");
break;
else
test += answer;
System.out.println ("answer: " + answer);
System.out.println ("test: " + test);
my hi.txt is like this:
fasd rea reks krie
fsdfasd
asdfasd
sfasdf
asdfasd
The output is
answer: fasd rea reks krie
answer: fsdfasd
answer: asdfasd
answer: sfasdf
answer: asdfasd
null
test: fasd rea reks kriefsdfasdasdfasdsfasdfasdfasd
Is this not the way u want???
Maybe you are looking for
-
How can I center a symbol on a responsive page created with adobe edge ?
Hi everybody ! I started working on Adobe Edge Animate for about 1 month now, it's a great tool for a young web designer like me. Actualy, I'm working on my responsive personal website and I encountered some problems. When I create a new symbol and t
-
Hello I have a problem where when i try to open my TV shows I got from the Itunes store. They just give me a black screen and the video itself isnt playing while it isnt paused either. I have tried uninstalling and reinstalling, checking for updates,
-
Query not opening due to the error in Calculated Key Figures
Hi Guys I have created 10 CKFs based on the replacement path type of formula variable using the attibutes of the charectistic Info Object which has been added to the cube. I am getting the error to open the query while executing it with some of the 1
-
Creating a Credit for a DP Invoice
I need to credit a DP Invoioce that has already been applied to an AR Invoice. Here is the steps I did so far: Cancelled the deposit (opened the Incoming payment) Tried to cancel the incoming payment (gives me an error that I cannot cancel the paymen
-
How to take CameraLink serial port into use in VC6+MFC?
I'm trying to use the CameraLink serial port. Developing environment is VC6 + MFC. Serial port controlling functions reside in CLSERNAT.DLL. clsernat.h is included in the project. Following code is used for accessing tjhe functions in DLL. --snip----