After BIOS update Cannot start my Satellite L305-S5885

Last night I've update the BIOS of my notebook, but when the BIOS flashing finished, it restarted Windows. The machine could not start again. The CD/DVD device enter in a cicle with a yellow light, and in the screen does not appear anything. Can somebody help me to solve this problem.
Old Bios: v1.40
New Bios: v1.50
OS: Windows XP with SP3
I can't use the CD/DVD device to boot with a Win PE.
Thanks

Hello!
I think the BIOS was not successfully because your notebook doesnt boot again.
In this case you cant make a lot of.
Try this: Remove the battery and AC/DC adaptor, wait up to 1 hour and then connect the battery and AC/DC adaptor. Try it again and hope it works.
If it not works you should contact a local ASP. In worst case the mainboard must be exchanged :(
Greets

Similar Messages

  • After BIOS update numpad on my Satellite C850 is not working properly

    My numpad started going crazy. All I can use are these "0.369*-+ home button end button PGUP and PGDN "
    The numpad light is on and I cant turn it off. whenever I do this its like Im pressing the FN button and whenever I press numpad 1 it always type gibberish words when I press numpad 2 it does what F12 button does and so on for numpad 4,5,7,8
    This all happen after I updated my BIOS and never has been a liquid spill on the keyboard.
    Any insight about this freaking problem?

    Hi
    I cannot imagine that this issue could be related to the new BIOS version.
    Maybe its a simple bad luck that this keyboard problem appeared after the BIOS update.
    From my point of few, it looks like keyboard hardware malfunction.
    But to confirm this diagnosis, you should try some workarounds.
    *1st* workaround: First of all enter the BIOS and set it to default.
    *2nd* workaround: disconnect AC adaptor, remove battery, press and hold power button 30 sec long. Finally connect both devices again.
    *3nd* workaround: connect external USB keyboard and test the functionality.
    In case the USB keyboard would work properly, the issue is related to internal keyboard fault.

  • After BIOS Update cannot boot Satellite C640 using USB Stick

    After upgrading my Toshiba Satellite C640-10E (PSC02E) bios to 2.00 WIN, I cannot boot the laptop using USB Stick, When I checked the BIOS using F2 I was stunned because the USB connected to laptop was labeled as FLOPPY drive. Is there any option to downgrade the BIOS?
    Thanks

    From my experience the BIOS is able to boot from
    - USB FDD (floppy disk)
    - Primary HDD,
    - USB Memory stick
    - Network (LAN)
    So I dont think that your USB memory is recognized as a USB FDD but the USB FDD appears as a separate boot device.
    It would be interesting to know if another USB flash memory would act as your old USB flash stick.
    PS: as Tonny suggested: you cannot downgrade because you dont have previous BIOS version only Toshiba service agents are able to downgrade the BIOS using traditional BIOS.

  • After BIOS update Satellite L350-172 doesn't start anymore

    Satellite L350-172 Bios-Update from bios-20090203164614 to bios-201002250
    I just updatet the BIOS of my notebook from 1.60 to 2,20. Now the Notebook doesn't start any longer.
    "It was stopped for reason not to damage the Computer" - blue schreen.
    How can I downgrade the bios again? Or - what have I to change in the bios-settings?

    Hi schuwe,
    Im a little bit confused about your posting. How do you tell your BIOS not to restart?
    Anyway, after BIOS update you should load the default settings in BIOS.
    Did you choose the right BIOS especially for your model?

  • Satellite A series does not start up after BIOS update

    After bios update with downloaded utility my notebook does not start up.
    Did this case covered by warranty?

    Im not quite sure if this would be covered by warranty. You should contact the ASP in your country for details but I presume its not covered.
    PS: Did you try this workaround:
    - remove battery, disconnect the AC adaptor
    - wait ~ 40min
    - connect both devices again and try to power up the notebook

  • Satellite Pro L300: BSOD after BIOS update

    Hi
    after update the Bios of Satellite Pro L300, the windows not start!
    Its show the blue dead screen!
    What can i do?

    Hi
    Are you able to access the BIOS settings?
    Im not quite sure why this BSOD appears but possibly the SATA mode settings have been changed after BIOS update
    Usually the SATA mode should be set to AHCI if the SATA drivers are installed.
    But if the SATA drivers are not included the SATA mode should be set to compatible.
    Please check this!
    Furthermore you could set the BIOS to the default settings and could try to boot the machine again.

  • Satellite A100-590 PSAA9E freezes on Toshiba welcome screen after BIOS update

    Hi.
    Yesterday I did a BIOS update on my Satellite A100-590 PSAA9E-03Z00QGR with the appropriate flash:
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?service=EU&selCategory =2&selFamily=2&selSeries=153&selProduct=624&langua ge=17&selOS=10&selType=all&yearupload=&monthupload =&dayupload=&useDate=null&mode=userMachines&search =&action=search&macId=&country=all&selectedLanguag e=17&type=all&page=1&ID=58477&OSID=-1&driverLanguage=42
    bios-20070709111839.zip
    After the flashing procedure the machine rebooted automatically, but unfortunately it now keeps hanging at the Thoshiba welcome screen. Also pressing F2 or F12 won't change anything. It seems like the BIOS is corrupt.
    I saw, that in the BIOS package are delivered two flash files (s10gm590.rom and s10pm590.rom). But just executing the SanAntonion10 BIOS590MP.exe a .vbs script is started that decides automatically chooses and loads a flash file. Maybe it chose the wrong one?
    What shall I do now? Is there a way to restore the BIOS, or do I have to send my notebook in?
    Thanks in advance
    MAT

    > Satellite A100-590 PSAA9E freezes on Toshiba welcome screen after BIOS update
    What to say Marc. It looks like you have used a wrong BIOS version or you have updated the BIOS in wrong way.
    You could try to access the BIOS and try to set the settings to default.
    Dont forget to save the settings if you will exit the BIOS.
    But if this procedure does not help, you will have to contact the ASP in your country.
    Possibly the guys will try to flash the BIOS again with other special version.
    Good luck
    Greetings

  • Satellite Pro C850 wont work after Bios update

    my satellite pro c850 cd wont work after bios update from toshiba.
    what do i do?

    Saying: dont work you mean it does not power up or what do you mean exactly?
    Did you flash the BIOS properly?
    Possibly something went wrong during the update and this means that ROM module isnt flashed properly
    In most cases a special BIOS crisis disk would be needed to get it working
    Not quite sure if you can get it fixed by your own
    Check this thread. Maybe it helps:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=59637
    Otherwise you need help from authorized service provider available in your country.

  • Satellite L650-1KR PSK1JE - dead after BIOS update

    As the subject already states, my Satellite L650 - 1KR Part No. PSK1JE is totally OFF after BIOS-Update 2.40-WIN from bios-download-page.
    I tried everything: Press all buttons, take out the laptop battery, only laptop battery, ...simply nothing!
    My last hope is a hidden, very special key sequence for toshiba laptops or something like this.
    Of course my warranty is already over... :-(
    Please help!
    Thank you in advance...
    lichtimc

    Sorry to hear you have such problem now. I presume something went wrong and now the BIOS chip is screwed up and in such situation you need professional help. Toshiba service provider can help you with this but Im afraid it can be very expensive.
    In the past I never had such problems but on the net you can find many pages with description what can be done. Visit this page and check if you can find something useful there. I mean you can try to fix it alone.

  • After BIOS update DVD driver do not read DVDs anymore - Sat A80

    Hi,
    I have a Satellite A80-131 and after bios update (last version 2.5) by windows procedure update, my DVD drive do not read DVD medias anymore. It is possible to read CD medias, but not DVD one.
    Can I reinstall the old bios? Can I reinstall the firmware?
    Thanks
    Ronai Lisboa

    Hi Ronai
    Like Jimi has said in the posting above. It's very unusual that after BIOS updating the DVD drive hasn't read the DVDs.
    Furthermore it's not advisable to use any 3rd party applications to DOWNGRADE the BIOS. Usually only the ASP can downgrade the BIOS. Such procedures are very serious and the wrong procedure can damage the motherboard.
    However, it's nice that you have solved the problem and that the drive works properly.
    Thanks for the feedback.

  • Boot issues after bios update (U430 touch)

    Hi all,
    I've been having some problems after updating my BIOS on my Ideapad U430 touch. After updating 7CCN34WW to 7CCN35WW, Windows 7 would not boot. It shows the usual 4 colors swirling to the center and then it stalls. Interestingly enough, at the top of the screen, white dotted lines appear (about 1 cm thick). These dotted lines alternate, turning off and on irregularely. I've waiting at least a half an hour, nothing happens.
    Now I figured out how to solve this, which is by changing the boot settings in the bios to Legacy instead of UEFI. After changing it back to UEFI everything works again. But every other day or so it still hangs during UEFI and I have to change the bios settings back and forth to get into Windows. Can anyone enlighten me on this issue? It would seem the bios update is faulty? What's going on? Can I downgrade the bios?
    In addition, the following topics are related but not quite the same as they don't describe the exact problem I have.
    http://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-series/Bios-Update-flash-error-U430-Touch/m-p/1591...
    http://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-series/P580-BIOS-update-Cant-start-up-computer/m-p...
    Thanks in advance,
    Cheers,
    Graham

    hi gannixon,
    Welcome to Lenovo Community Forums!
       Yes it is possible that a UEFI / Secureboot check fails something in the  OS UEFI boot after the update.
    The system does not support a backflash feature, Reflashing the BIOS might need to be done in Lenovo Service Depot,  
        If you don't have much data on the unit, I can suggest performing a one key Recovery while on a UEFI mode.
    Downside will be Deletion of current files and documents and back up will be required.
    Regards
    Solid Cruver
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • What's new in the BIOS Update v2.00 for Satellite L505-144

    What's new in the BIOS Update v2.00 for Satellite l505-144
    Thanks

    Hi mate
    As far as I know Toshiba European driver page does not provide any details what has been changed in the BIOS.
    But I found some details on Toshiba US page.
    It seems that Fn+N+1/2/3/4 debug function has been removed in BIOS 2.0 to avoid keyboard abnormal behavior.
    Greets

  • I can't activate windows 8.1 pre-instal​led on my Toshiba E45-B4200 after BIOS Update

    I bought Toshiba laptop Model E45-B4200, at first time I could activate windows 8.1 like a charm.
    Few months later Windows 8.1 has crashed, so I did clean install of pre-installed windows, no problem so far. Toshiba Application installer app has downloaded BIOS update, so I ran it.
    I tried to activate windows after BIOS update, but it didn`t work. No error message, but Change PC settings window just got minimized every time that I tried to click on Activate Windows option. I thought that I did some mistake, so I repeated windows reinstallation, and same problem occurred again.
    Now I can`t update Windows, Office 2013, and so on. 
    I`ve tried SLUI 4 command to force activation by phone, but it didn`t work as well.
    I read on MS blogs that windows 8.1 stores product key on MSDM table, windows should be activated normally. Now I got no options now, can you help me?

    It shouldn't need to be activated it. Everything should be automatic. Because it's asking you, that's already indicative of a problem. You might want to call customer support.
    - Peter

  • Problem in booting after bios update

    Originally, it was windows home basic was installed in my laptop. But recently I had installed Windows professional. After installation I have downloaded all drivers which are compatible for my laptop model. After BIOS update installation my pc is not booting up at all. Only power button, WiFi and capslock is lighting. Capslock is continuosly blicking. Even FAN speed gets lowered. I have tried hard reset as well as windows+B comand during startup still condition is same. Please reply me....

    see help 8....
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • Hi . plz help me. after bios update. i could work till I shutdown

    After bios update I could work till I shutdown my laptop g510 . Now when I press power button. White light near camera shows but again it goes off. Plzzzzz help me
    I also pressed one recovery. Then pressed f2 and f9 f12 nothing working.

    take it to point of purchase with proof of purchase if you can't find a Nokia care point near you
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

Maybe you are looking for