After bios update, doesnt boot up...

Hi I went throught that bios update from live update deal. It works great most of the time but this time the computer wont display. I mean I can hear the drives going and all as if its ok, but no display comes up. I have an athlon 3400 with Mushkin memory (one gig total) RADEON AIW 9800 pro and an SATA controller card with a raptor 36 gig, so, what should I do? I reset the bios, that didnt do anything.

Hi,
You will not be able to run board without a HDD and a floppy or CD. Once you have these fitted what does d bracket show?  Let me know if the rig beeps, and how often
Don't muck about with battery, Ram and things on the off chance it might do something, more likely get a spike of static and blow the system.
What PSU are you using, what amps does it give on the 3.3v the +5v and the +12v lines
This is most likely a bad connection, short,  missing component or inadequate PSU.
May be RAM, have you made sure you earthed yourels to case before touching inside case, especially Ram or CPU.
Cheers
jocko

Similar Messages

  • Equium A60-173 - After BIOS update no boot

    Hi, I have a Toshiba Equium A60-173 running Windows XP.
    I just attempted to update the BIOS and all was going well until it shut down and did not switch itself back on. I waited and waited then powered it up myself. Result was a black screen or maybe even screen did not power on. I left it like this for about 5 mins then thought it had crashed so tried to switch it off to restart. The power button would not respond so I left it a little longer then removed the battery (<<<idiot I know)
    Now the laptop will not boot, I press the power button and get: beeeep beep beeeep beep then it shuts off :S
    I am lost and hope I haven't just destroyed my girlfriends laptop!
    Any help/steps/advice very much appreciated!
    Thanks

    Hi
    Unfortunately if BIOS update fails you can do nothing because the ROM module must be reflashed from a notebook technician
    So you must contact a service partner in your country and ask for help. The guys can help you to get rid of this.

  • Satellite Pro M40X: after BIOS Update- no boot!

    Hello, i have the problem: there was no reaction after try to update the BIOS (within Windows XP). So i switched the notebook off(AC power off, battery away).
    So now i have after "switch on" only black screen, there ist no boot menu, no bios, only the fan ist running.
    What can i do in this situation?
    Thanks: vladi

    Hi buddy,
    the only thing you could do is to bring your machine to an ASP (authorized service partner) for a hardware checkup or BIOS repair because you in your situation cannot do anything.
    Please, contact a service partner and send your machine to them, its the only way to solve your problems.
    Heres a link to find the nearest ASP in your country:
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT
    Good luck and nice weekend

  • After BIOS Update cannot boot Satellite C640 using USB Stick

    After upgrading my Toshiba Satellite C640-10E (PSC02E) bios to 2.00 WIN, I cannot boot the laptop using USB Stick, When I checked the BIOS using F2 I was stunned because the USB connected to laptop was labeled as FLOPPY drive. Is there any option to downgrade the BIOS?
    Thanks

    From my experience the BIOS is able to boot from
    - USB FDD (floppy disk)
    - Primary HDD,
    - USB Memory stick
    - Network (LAN)
    So I dont think that your USB memory is recognized as a USB FDD but the USB FDD appears as a separate boot device.
    It would be interesting to know if another USB flash memory would act as your old USB flash stick.
    PS: as Tonny suggested: you cannot downgrade because you dont have previous BIOS version only Toshiba service agents are able to downgrade the BIOS using traditional BIOS.

  • Problem in booting after bios update

    Originally, it was windows home basic was installed in my laptop. But recently I had installed Windows professional. After installation I have downloaded all drivers which are compatible for my laptop model. After BIOS update installation my pc is not booting up at all. Only power button, WiFi and capslock is lighting. Capslock is continuosly blicking. Even FAN speed gets lowered. I have tried hard reset as well as windows+B comand during startup still condition is same. Please reply me....

    see help 8....
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • Satellite Pro L300: BSOD after BIOS update

    Hi
    after update the Bios of Satellite Pro L300, the windows not start!
    Its show the blue dead screen!
    What can i do?

    Hi
    Are you able to access the BIOS settings?
    Im not quite sure why this BSOD appears but possibly the SATA mode settings have been changed after BIOS update
    Usually the SATA mode should be set to AHCI if the SATA drivers are installed.
    But if the SATA drivers are not included the SATA mode should be set to compatible.
    Please check this!
    Furthermore you could set the BIOS to the default settings and could try to boot the machine again.

  • HP p6230a runs slow after bios update - Getting error BIODHD-8 on Diagnostic Tools

    After bios update my desktop runs so painfully slow it is unworkable.  Disk drive seems to be constantly hammered by processes that don't appear on task manager.  Running 64 bit windows 7 (sp1).  Running the diagnostic tools prior to boot up comes up with error code BIOHD-8 - A SMART test failed on the drive - please contact HP Support.  Ideally would like to get previous version of bios as machine was running well before update. 

    I will ask my HP Employee Expert colleagues about this internally. It will take a while for them to respond.
    the BIODHD-8 error code means your harddrive is failing and must be replaced.
    Back up everything that you possibly can before it fails and no longer boots up into Windows .
    is your notebook still within the standard warranty period of one year? A notebook hard disk is a warranty replaceable item.(no cost to you while within warranty) 
    HP notebook warranty status check website
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • I can't activate windows 8.1 pre-instal​led on my Toshiba E45-B4200 after BIOS Update

    I bought Toshiba laptop Model E45-B4200, at first time I could activate windows 8.1 like a charm.
    Few months later Windows 8.1 has crashed, so I did clean install of pre-installed windows, no problem so far. Toshiba Application installer app has downloaded BIOS update, so I ran it.
    I tried to activate windows after BIOS update, but it didn`t work. No error message, but Change PC settings window just got minimized every time that I tried to click on Activate Windows option. I thought that I did some mistake, so I repeated windows reinstallation, and same problem occurred again.
    Now I can`t update Windows, Office 2013, and so on. 
    I`ve tried SLUI 4 command to force activation by phone, but it didn`t work as well.
    I read on MS blogs that windows 8.1 stores product key on MSDM table, windows should be activated normally. Now I got no options now, can you help me?

    It shouldn't need to be activated it. Everything should be automatic. Because it's asking you, that's already indicative of a problem. You might want to call customer support.
    - Peter

  • After BIOS update Satellite L350-172 doesn't start anymore

    Satellite L350-172 Bios-Update from bios-20090203164614 to bios-201002250
    I just updatet the BIOS of my notebook from 1.60 to 2,20. Now the Notebook doesn't start any longer.
    "It was stopped for reason not to damage the Computer" - blue schreen.
    How can I downgrade the bios again? Or - what have I to change in the bios-settings?

    Hi schuwe,
    Im a little bit confused about your posting. How do you tell your BIOS not to restart?
    Anyway, after BIOS update you should load the default settings in BIOS.
    Did you choose the right BIOS especially for your model?

  • Hi . plz help me. after bios update. i could work till I shutdown

    After bios update I could work till I shutdown my laptop g510 . Now when I press power button. White light near camera shows but again it goes off. Plzzzzz help me
    I also pressed one recovery. Then pressed f2 and f9 f12 nothing working.

    take it to point of purchase with proof of purchase if you can't find a Nokia care point near you
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • After BIOS update DVD driver do not read DVDs anymore - Sat A80

    Hi,
    I have a Satellite A80-131 and after bios update (last version 2.5) by windows procedure update, my DVD drive do not read DVD medias anymore. It is possible to read CD medias, but not DVD one.
    Can I reinstall the old bios? Can I reinstall the firmware?
    Thanks
    Ronai Lisboa

    Hi Ronai
    Like Jimi has said in the posting above. It's very unusual that after BIOS updating the DVD drive hasn't read the DVDs.
    Furthermore it's not advisable to use any 3rd party applications to DOWNGRADE the BIOS. Usually only the ASP can downgrade the BIOS. Such procedures are very serious and the wrong procedure can damage the motherboard.
    However, it's nice that you have solved the problem and that the drive works properly.
    Thanks for the feedback.

  • Satellite A100-590 PSAA9E freezes on Toshiba welcome screen after BIOS update

    Hi.
    Yesterday I did a BIOS update on my Satellite A100-590 PSAA9E-03Z00QGR with the appropriate flash:
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?service=EU&selCategory =2&selFamily=2&selSeries=153&selProduct=624&langua ge=17&selOS=10&selType=all&yearupload=&monthupload =&dayupload=&useDate=null&mode=userMachines&search =&action=search&macId=&country=all&selectedLanguag e=17&type=all&page=1&ID=58477&OSID=-1&driverLanguage=42
    bios-20070709111839.zip
    After the flashing procedure the machine rebooted automatically, but unfortunately it now keeps hanging at the Thoshiba welcome screen. Also pressing F2 or F12 won't change anything. It seems like the BIOS is corrupt.
    I saw, that in the BIOS package are delivered two flash files (s10gm590.rom and s10pm590.rom). But just executing the SanAntonion10 BIOS590MP.exe a .vbs script is started that decides automatically chooses and loads a flash file. Maybe it chose the wrong one?
    What shall I do now? Is there a way to restore the BIOS, or do I have to send my notebook in?
    Thanks in advance
    MAT

    > Satellite A100-590 PSAA9E freezes on Toshiba welcome screen after BIOS update
    What to say Marc. It looks like you have used a wrong BIOS version or you have updated the BIOS in wrong way.
    You could try to access the BIOS and try to set the settings to default.
    Dont forget to save the settings if you will exit the BIOS.
    But if this procedure does not help, you will have to contact the ASP in your country.
    Possibly the guys will try to flash the BIOS again with other special version.
    Good luck
    Greetings

  • After bios update, my window media player got hang and headphone clarity is not proper

    HP Pavilion g6  after bios update, my window media player  got hang and headphone clarity is not proper

    Hello mathewstays,
    Which model of g6 do you have? Which operating system? I'll be able to better assist when I know this information.
    Thanks,
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • After bios update side nomberpad is not workinh keys from 0-9

    after bios update side nomberpad is not workinh keys from 0-9

    Hello jay04,
    Welcome to the HP Forums!
    I understand the number keys do not work on your keyboard. I will do my best to assist you. First, I require the following information:
    1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your product number
    2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
    3. Does this occur on certain programs, or all programs?
    4. Have you installed any new software or drivers on this computer, before the issue appeared?
    Additionally, if the issue just began occurring, I would perform a system restore. I want you to bring the computer back to the earliest restore point possible, in an attempt to dodge whatever caused the issue. Here is a document on how to perform a System Restore: System Restore
    Thanks!
    Mario
    I worked on behalf of HP.

  • Satellite Pro C850 wont work after Bios update

    my satellite pro c850 cd wont work after bios update from toshiba.
    what do i do?

    Saying: dont work you mean it does not power up or what do you mean exactly?
    Did you flash the BIOS properly?
    Possibly something went wrong during the update and this means that ROM module isnt flashed properly
    In most cases a special BIOS crisis disk would be needed to get it working
    Not quite sure if you can get it fixed by your own
    Check this thread. Maybe it helps:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=59637
    Otherwise you need help from authorized service provider available in your country.

Maybe you are looking for

  • Constantly having kernel panics on Macbook Pro

    Hi all, For the last couple of weeks I'm having kernel panics on my MBP. The last couple of days I'm having more and more of these panics. It's starting to drive me crazy and was wondering if someone could help me with my last rapport. Is it a third

  • Is there a script (or plugin) that will take a photo and break it up into parts?

    Is there a script or plug-in out there that will take a picture and break it up into various parts (squares for example.)  The idea would be that you could automate and rapidly create a photo collage of a single image.  (See examples of what I mean i

  • BPEL process blue print not importable by JDeveloper

    Hi I have a troublesome BPEL process that is not being imported into JDeveloper. Others work fine and the closed loop process change management works great. However, this particular one is annoying. On selecting the process, JDeveloper downloads the

  • Printing File lists with thumbnails?

    I have to go through a ton of image files for a book project. All the images are categorized into subfolders according to chapters. Is there an easy way using Bridge to print a list of these folders with thumbnails of each image? Thanks! -Brian

  • Forms question  about exceptions

    Hello, I am a newbie and hence my question may find very basic, please help me. I have a Pl/sql code where I am executing a queryand if the query doesn't retrieve any values I need to show a message. My code is something like this: select id from tab