After BIOS update Intel Speed Step not working on Satellite A500

I upgraded my Satellite A500 PSAM3E model to the newest BIOS 1.50, now the Intel speed step not working!
My CPU is always 2GHz+, I chagned Power Plan to balanced, but no change... with previous the CPU was around 800 MHz.
When I try to change Windows 7 power management and set maximum CPU performance to 50 or 80% the system freezes.

Hey Szaby59,
Which older BIOS version did you use before update to 1.50?
I also use the maximum CPU performance option for Eco mode (50%) but this does work properly.
Furthermore it would be interesting to know if you use factory settings or your own Windows installation. Normally after using Toshiba recovery disk you dont have to install any Toshiba tools anymore. Everything is preinstalled on your notebook.

Similar Messages

  • After bios update side nomberpad is not workinh keys from 0-9

    after bios update side nomberpad is not workinh keys from 0-9

    Hello jay04,
    Welcome to the HP Forums!
    I understand the number keys do not work on your keyboard. I will do my best to assist you. First, I require the following information:
    1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your product number
    2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
    3. Does this occur on certain programs, or all programs?
    4. Have you installed any new software or drivers on this computer, before the issue appeared?
    Additionally, if the issue just began occurring, I would perform a system restore. I want you to bring the computer back to the earliest restore point possible, in an attempt to dodge whatever caused the issue. Here is a document on how to perform a System Restore: System Restore
    Thanks!
    Mario
    I worked on behalf of HP.

  • I have an Iphone 4 16gb and updated the IOS 6.1.2. after the update my 3G is not working at all??. can you please suggest what can be done to rectify this problem?

    i have an Iphone 4 16gb and updated the IOS 6.1.2. after the update my 3G is not working at all??. can you please suggest what can be done to rectify this problem?

    I have the same problem.  After updating to 6.1.2 my iPad 3,2 will not find Verizon network.  It just says "Searching..." for ever.  Any thoughts?

  • After an update my airport is not working. It won't turn on. Do I need to redownload a driver, and how?

    After an update my airport is not working. It won't turn on no matter how many times I press the turn on Wi Fi button. Do I need to redownload a driver, and how?

    Hello
    Try this
    plug a WIERED mouse , start up your imac , hold on mouse buttons for 30-40 second at least by chance cd could be ejected
    HTH
    Pierre

  • After the update my earbuds will not work for my music BUT will work fine for phone conversations

    After the update my earbud will not work for music BUT will work for phone conversations

    this might sound dumb but how do i do that because that is probably the problem

  • After BIOS update DVD driver do not read DVDs anymore - Sat A80

    Hi,
    I have a Satellite A80-131 and after bios update (last version 2.5) by windows procedure update, my DVD drive do not read DVD medias anymore. It is possible to read CD medias, but not DVD one.
    Can I reinstall the old bios? Can I reinstall the firmware?
    Thanks
    Ronai Lisboa

    Hi Ronai
    Like Jimi has said in the posting above. It's very unusual that after BIOS updating the DVD drive hasn't read the DVDs.
    Furthermore it's not advisable to use any 3rd party applications to DOWNGRADE the BIOS. Usually only the ASP can downgrade the BIOS. Such procedures are very serious and the wrong procedure can damage the motherboard.
    However, it's nice that you have solved the problem and that the drive works properly.
    Thanks for the feedback.

  • Satellite M40X: After Bios update keyboard keys don't work properly

    I have a Satellite M40X and I had update the Bios to v. 1.60 and now the keys u, m, 7 and the arrow up are not working properly. The problem is that there is not other Bios version to use.
    How can I resolve my problem?
    Can I recover the old bios version?
    Thanks
    Gabriel

    Hi there,
    no you wont be able to recover the old BIOS. The only two options are:
    1. Retry the BIOS update and check if its working
    2. In case of no success, please visit the [ASP Locator|http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT] to search for the nearest ASP in your country and to ask them for a hardware checkup and repair.
    Greets

  • Qosmio F50-10Z - After BIOS update illuminated buttons don't work

    Tempro alerted me about a BIOS update - bios-20090415092322.zip - for 32bit Vista, released 15 April 2009, for my F50-10Z.
    Since then, the illuminated 'buttons' atop my keyboard no longer work - including, annoyingly, the button to turn off the illumination.
    Is there anything I can do at this point? I tried a system restore, but it didn't affect the BIOS.

    Hi, and thanks for your reply.
    I had previously tried reinstalling the Value Added Pack, to no avail (in fact I lost my special function keys also, which I got back via system restore), but after a bios reset it did the job.
    For anybody reading this after the event, to restore BIOS to defaults on a Qosmio f50,
    restart
    hit f2
    hit f9 (then indicate yes)
    hit f10 (indicate yes)
    I don't poke around in BIOS myself, having a healthy fear of the unknown, but I guess something had gone askew somewhere.
    I also found a little program called dimmer.exe which can actually turn off the lights if they are stuck on. For the record, I had the lights switched off when I reset the BIOS and reinstalled VAP
    Thank you both for your assistance.
    Message was edited by: Gemb

  • Equium A210 - After BIOS update the DVD drive stopped working

    hi, since I have updated my BIOS recently, my DVD drive has stopped working on my Equium A210-1AS with Vista 32bit.
    I have tried Microsoft fixme program that does not work, upper and lower registry is not there ether in regedit.
    Has anyone got any solutions to get DVD drive working again?
    Thank you

    The CD/DVD was working fine before I was prompted by Toshiba tempro to update my BIOS, since then my CD/DVD drive doesnt work.
    Have tried fixme from Microsoft that doesnt work, have tried to delete upper/lower filters they are not there, have unistalled CD drive and restarted the drive re-installs and still does not reconise any CD/DVD to boot up and DVD drive disapears some times
    Any suggestions?
    Thanks

  • Satellite L300-26K - After BIOS update the touchpad doesn't work anymore

    Hi,
    like recommended by tempro, I updated BIOS from ver.2.1 to 2.2 (windows-Version). After rebooting, touchpad incl. tips doesnt work anymore. In bios touchpad is enabled, in system it says unit is working properly. FN/F9 makes no effect. Reinstalling synaptics drivers - no effect - still dead.
    Satellite L300-26K
    Using Vista 32bit home
    How can I restore BIOS to 2.1 again? (if i try the windows-bios utility from V2.1 it says it is still installed - so I cannot downgrade by this easy way)
    Please help - I need my notebook without external mouse (this works)
    yours
    Oliver
    Message was edited by: enigmo

    Hi enigmo,
    I cant imagine that this happened due the BIOS update. Have you tried reinstalling Windows by using Toshiba recovery disk?
    This BIOS downgrade can only be done from an authorized service provider. The technicians can install every version because they have such special tools to make a downgrade.
    On the Toshiba website you can find a list of them. Just give the guys and ask for that. They will help you! :)

  • After last update facebook messenger is not working correctly

    It's happening to 3 different people I know.  Once they updated their phone, their Facebook Messenger Service is not working Correctly.  They have already deleted and reinstalled the app.
    Any suggestions?  Is this last update known to cause this?

    razmee209 is correct.
    If deleting the app doesnt help you could try a back up and restore as new to determine a software or hardware issue. But if the app doesnt work on the iOS it is not the iPhones fault it is the apps. Apps are meant to be compatible and run on iOS not the other way around. If the app fails to run on the iOS it is something that would need to be taken up with the app developers.

  • After Yosemite update canon mx860 does not work wirelessly

    Yosemite version10.10.1
    MacBook Pro (13-inch, Mid 2009)
    Canon driver  11.7.1.0
    Since downloading yosemite I can not print wirelessly.  I have the latest software from apple and canon.  I have followed all the advice from both sites. 
    I have deleted and reset the printer.  I have turned off both my printer and my router and turned them back on.
    I have downloaded the most recent software.  I am still only able to print on the usb.
    On the printer the WLAN setting list says that the connection is active and it is connected to the correct  SSID.  The WLAN setting also says that it is in communication mode.
    What ideas do you have for me to try next?
    Thank you very much,
    Willie

    I ran across your question while having a very similar problem. I was able to finally fix mine by unplugging both my modem and router. I see that you've already done that. When I was reading through other questions, I saw that a few people had fixed the problem by setting a static IP for the printer through the router. I barely know what I'm talking about here. Just thought it may be of use. The discussion was here: Support Code:300 The printer does not respond. About the 4th page of responses. Best of luck to you!

  • After Microsoft updates, some website graphics not working

    Last night before I switched off Microsoft sent through eleven(!) updates.
    Every site I've visited this morning now has no banner heading, I can't use any of the underlining/bold or the smilies on anywhere, and on a couple of sites my Avatar has gone.
    What can I do?
    I've tried logging out and logging in again, but nothing seems to help?

    Try clearing your browser cache.
    Tools > Clear Recent History... - hit Details and make sure only Cache is selected, then select Everything and hit the Clear Now button.

  • I can't activate windows 8.1 pre-instal​led on my Toshiba E45-B4200 after BIOS Update

    I bought Toshiba laptop Model E45-B4200, at first time I could activate windows 8.1 like a charm.
    Few months later Windows 8.1 has crashed, so I did clean install of pre-installed windows, no problem so far. Toshiba Application installer app has downloaded BIOS update, so I ran it.
    I tried to activate windows after BIOS update, but it didn`t work. No error message, but Change PC settings window just got minimized every time that I tried to click on Activate Windows option. I thought that I did some mistake, so I repeated windows reinstallation, and same problem occurred again.
    Now I can`t update Windows, Office 2013, and so on. 
    I`ve tried SLUI 4 command to force activation by phone, but it didn`t work as well.
    I read on MS blogs that windows 8.1 stores product key on MSDM table, windows should be activated normally. Now I got no options now, can you help me?

    It shouldn't need to be activated it. Everything should be automatic. Because it's asking you, that's already indicative of a problem. You might want to call customer support.
    - Peter

  • [Solved] Mouse and Keyboard Dont Work After BIOS Update

    I spent the last few hours in windows 7 trying to prove to the guys over at MSFN that my problem wasn't driver or bios related by updating to the latest drivers and upgrading my bios to the most recent version. After I was finished I decided to boot back into arch to work some more on my custom kernel (since oddly it had the same problem before the bios update, the mouse and keyboard worked on one boot but once i rebooted into it again they no longer worked) and found that the keyboard and mouse no longer worked, thinking I had rebooted into the custom kernel by accident I rebooted and selected the default kernel once again only to find that the mouse and keyboard still didn't work.
    Any ideas on how to fix this? I really don't want to reinstall since I just installed it last night.
    Edit: Another silly mistake, i had renamed the original xorg.conf and never put back when I was finished. This makes me wonder why KDM even started up at all though.
    Last edited by brando56894 (2010-01-08 08:04:21)

    Hello base76, welcome to the HP Forums.
    It appears that the mouse and keyboard aren't working correctly. I will try to assist you with this.
    To start could you please provide the following:
    Model and product numbers for you notebook.
    Currently install operating system.
    Were these working previously? If yes, were any changes made prior to them not working?
    Have you attempted any troubleshooting? If yes, what have you tried so far?
    I look forward to your reply.
    Thank you for posting on the HP Forums.
    I worked on behalf of HP.

Maybe you are looking for

  • Internet Connect Consistently Hangs On Startup

    Anytime the computer is shut down and has to be restarted, Internet Connect always hangs without fail. It appears to actually connect, but quickly thereafter, I get the prompt that tells me that it's unexpectedly quit. When I try again, I'm successfu

  • Upgrade Crossgrade of FCS?

    I hope I am not thrashing a subject here, but... I did a crossgrade from Final Cut Pro to Final Cut Studio when the offer was available last year. As a result, I now have a "crossgrade" version of FCS as the DVDs are labeled. Can I use my "crossgrade

  • Are there any Java Ogg Vorbis API's or examples

    I'm currently involved in a project where in we need to record the audio from a mic encode with vorbis, then put it in Ogg container, and then make it as RTP packet and transmit over Darwin Streaming Server. Till now we were using JMF with available

  • HT201077 I am having trouble deleting individual photos from my iPad on shared photo streaming.

    I am having trouble deleting individual photos on Shared Photo Streaming on my iPad 2. There is not a trash can or delete option. If I choose edit on the first page, and I try to delete, the next step is to cancel photo sharing, which I don't want to

  • UK Leadership Program

    I applied for the UK Leadership Program back in March and still have not heard back from Apple. I have, to no avail, tried to track down an email address or phone number to chase up my application. How can I find out the status of my application, eve